Makefile

   1 VERSION = 3
   2 PATCHLEVEL = 18
   3 SUBLEVEL = 101
   4 EXTRAVERSION =
   5 NAME = Diseased Newt
   6
   7 # *DOCUMENTATION*
   8 # To see a list of typical targets execute "make help"
   9 # More info can be located in ./README
  10 # Comments in this file are targeted only to the developer, do not
  11 # expect to learn how to build the kernel reading this file.
  12
  13 # Do not use make's built-in rules and variables
  14 # (this increases performance and avoids hard-to-debug behaviour);
  15 MAKEFLAGS += -rR
  16
  17 # Avoid funny character set dependencies
  18 unexport LC_ALL
  19 LC_COLLATE=C
  20 LC_NUMERIC=C
  21 export LC_COLLATE LC_NUMERIC
  22
  23 # Avoid interference with shell env settings
  24 unexport GREP_OPTIONS
  25
  26 # We are using a recursive build, so we need to do a little thinking
  27 # to get the ordering right.
  28 #
  29 # Most importantly: sub-Makefiles should only ever modify files in
  30 # their own directory. If in some directory we have a dependency on
  31 # a file in another dir (which doesn't happen often, but it's often
  32 # unavoidable when linking the built-in.o targets which finally
  33 # turn into vmlinux), we will call a sub make in that other dir, and
  34 # after that we are sure that everything which is in that other dir
  35 # is now up to date.
  36 #
  37 # The only cases where we need to modify files which have global
  38 # effects are thus separated out and done before the recursive
  39 # descending is started. They are now explicitly listed as the
  40 # prepare rule.
  41
  42 # Beautify output
  43 # ---------------------------------------------------------------------------
  44 #
  45 # Normally, we echo the whole command before executing it. By making
  46 # that echo $($(quiet)$(cmd)), we now have the possibility to set
  47 # $(quiet) to choose other forms of output instead, e.g.
  48 #
  49 #         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
  50 #         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
  51 #
  52 # If $(quiet) is empty, the whole command will be printed.
  53 # If it is set to "quiet_", only the short version will be printed.
  54 # If it is set to "silent_", nothing will be printed at all, since
  55 # the variable $(silent_cmd_cc_o_c) doesn't exist.
  56 #
  57 # A simple variant is to prefix commands with $(Q) - that's useful
  58 # for commands that shall be hidden in non-verbose mode.
  59 #
  60 #       $(Q)ln $@ :<
  61 #
  62 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
  63 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
  64 #
  65 # To put more focus on warnings, be less verbose as default
  66 # Use 'make V=1' to see the full commands
  67
  68 ifeq ("$(origin V)", "command line")
  69   KBUILD_VERBOSE = $(V)
  70 endif
  71 ifndef KBUILD_VERBOSE
  72   KBUILD_VERBOSE = 0
  73 endif
  74
  75 ifeq ($(KBUILD_VERBOSE),1)
  76   quiet =
  77   Q =
  78 else
  79   quiet=quiet_
  80   Q = @
  81 endif
  82
  83 # If the user is running make -s (silent mode), suppress echoing of
  84 # commands
  85
  86 ifneq ($(filter 4.%,$(MAKE_VERSION)),)  # make-4
  87 ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
  88   quiet=silent_
  89 endif
  90 else                                    # make-3.8x
  91 ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
  92   quiet=silent_
  93 endif
  94 endif
  95
  96 export quiet Q KBUILD_VERBOSE
  97
  98 # kbuild supports saving output files in a separate directory.
  99 # To locate output files in a separate directory two syntaxes are supported.
 100 # In both cases the working directory must be the root of the kernel src.
 101 # 1) O=
 102 # Use "make O=dir/to/store/output/files/"
 103 #
 104 # 2) Set KBUILD_OUTPUT
 105 # Set the environment variable KBUILD_OUTPUT to point to the directory
 106 # where the output files shall be placed.
 107 # export KBUILD_OUTPUT=dir/to/store/output/files/
 108 # make
 109 #
 110 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
 111 # variable.
 112
 113 # KBUILD_SRC is set on invocation of make in OBJ directory
 114 # KBUILD_SRC is not intended to be used by the regular user (for now)
 115 ifeq ($(KBUILD_SRC),)
 116
 117 # OK, Make called in directory where kernel src resides
 118 # Do we want to locate output files in a separate directory?
 119 ifeq ("$(origin O)", "command line")
 120   KBUILD_OUTPUT := $(O)
 121 endif
 122
 123 # That's our default target when none is given on the command line
 124 PHONY := _all
 125 _all:
 126
 127 # Cancel implicit rules on top Makefile
 128 $(CURDIR)/Makefile Makefile: ;
 129
 130 ifneq ($(KBUILD_OUTPUT),)
 131 # Invoke a second make in the output directory, passing relevant variables
 132 # check that the output directory actually exists
 133 saved-output := $(KBUILD_OUTPUT)
 134 KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
 135                                                                 && /bin/pwd)
 136 $(if $(KBUILD_OUTPUT),, \
 137      $(error failed to create output directory "$(saved-output)"))
 138
 139 PHONY += $(MAKECMDGOALS) sub-make
 140
 141 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
 142         @:
 143
 144 sub-make: FORCE
 145         $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
 146         -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
 147
 148 # Leave processing to above invocation of make
 149 skip-makefile := 1
 150 endif # ifneq ($(KBUILD_OUTPUT),)
 151 endif # ifeq ($(KBUILD_SRC),)
 152
 153 # We process the rest of the Makefile if this is the final invocation of make
 154 ifeq ($(skip-makefile),)
 155
 156 # Do not print "Entering directory ...",
 157 # but we want to display it when entering to the output directory
 158 # so that IDEs/editors are able to understand relative filenames.
 159 MAKEFLAGS += --no-print-directory
 160
 161 # Call a source code checker (by default, "sparse") as part of the
 162 # C compilation.
 163 #
 164 # Use 'make C=1' to enable checking of only re-compiled files.
 165 # Use 'make C=2' to enable checking of *all* source files, regardless
 166 # of whether they are re-compiled or not.
 167 #
 168 # See the file "Documentation/sparse.txt" for more details, including
 169 # where to get the "sparse" utility.
 170
 171 ifeq ("$(origin C)", "command line")
 172   KBUILD_CHECKSRC = $(C)
 173 endif
 174 ifndef KBUILD_CHECKSRC
 175   KBUILD_CHECKSRC = 0
 176 endif
 177
 178 # Use make M=dir to specify directory of external module to build
 179 # Old syntax make ... SUBDIRS=$PWD is still supported
 180 # Setting the environment variable KBUILD_EXTMOD take precedence
 181 ifdef SUBDIRS
 182   KBUILD_EXTMOD ?= $(SUBDIRS)
 183 endif
 184
 185 ifeq ("$(origin M)", "command line")
 186   KBUILD_EXTMOD := $(M)
 187 endif
 188
 189 # If building an external module we do not care about the all: rule
 190 # but instead _all depend on modules
 191 PHONY += all
 192 ifeq ($(KBUILD_EXTMOD),)
 193 _all: all
 194 else
 195 _all: modules
 196 endif
 197
 198 ifeq ($(KBUILD_SRC),)
 199         # building in the source tree
 200         srctree := .
 201 else
 202         ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
 203                 # building in a subdirectory of the source tree
 204                 srctree := ..
 205         else
 206                 srctree := $(KBUILD_SRC)
 207         endif
 208 endif
 209 objtree         := .
 210 src             := $(srctree)
 211 obj             := $(objtree)
 212
 213 VPATH           := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 214
 215 export srctree objtree VPATH
 216
 217
 218 # SUBARCH tells the usermode build what the underlying arch is.  That is set
 219 # first, and if a usermode build is happening, the "ARCH=um" on the command
 220 # line overrides the setting of ARCH below.  If a native build is happening,
 221 # then ARCH is assigned, getting whatever value it gets normally, and
 222 # SUBARCH is subsequently ignored.
 223
 224 SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
 225                                   -e s/sun4u/sparc64/ \
 226                                   -e s/arm.*/arm/ -e s/sa110/arm/ \
 227                                   -e s/s390x/s390/ -e s/parisc64/parisc/ \
 228                                   -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
 229                                   -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
 230
 231 # Cross compiling and selecting different set of gcc/bin-utils
 232 # ---------------------------------------------------------------------------
 233 #
 234 # When performing cross compilation for other architectures ARCH shall be set
 235 # to the target architecture. (See arch/* for the possibilities).
 236 # ARCH can be set during invocation of make:
 237 # make ARCH=ia64
 238 # Another way is to have ARCH set in the environment.
 239 # The default ARCH is the host where make is executed.
 240
 241 # CROSS_COMPILE specify the prefix used for all executables used
 242 # during compilation. Only gcc and related bin-utils executables
 243 # are prefixed with $(CROSS_COMPILE).
 244 # CROSS_COMPILE can be set on the command line
 245 # make CROSS_COMPILE=ia64-linux-
 246 # Alternatively CROSS_COMPILE can be set in the environment.
 247 # A third alternative is to store a setting in .config so that plain
 248 # "make" in the configured kernel build directory always uses that.
 249 # Default value for CROSS_COMPILE is not to prefix executables
 250 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
 251 ARCH            ?= $(SUBARCH)
 252 CROSS_COMPILE   ?= $(CONFIG_CROSS_COMPILE:"%"=%)
 253
 254 # Architecture as present in compile.h
 255 UTS_MACHINE     := $(ARCH)
 256 SRCARCH         := $(ARCH)
 257
 258 # Additional ARCH settings for x86
 259 ifeq ($(ARCH),i386)
 260         SRCARCH := x86
 261 endif
 262 ifeq ($(ARCH),x86_64)
 263         SRCARCH := x86
 264 endif
 265
 266 # Additional ARCH settings for sparc
 267 ifeq ($(ARCH),sparc32)
 268        SRCARCH := sparc
 269 endif
 270 ifeq ($(ARCH),sparc64)
 271        SRCARCH := sparc
 272 endif
 273
 274 # Additional ARCH settings for sh
 275 ifeq ($(ARCH),sh64)
 276        SRCARCH := sh
 277 endif
 278
 279 # Additional ARCH settings for tile
 280 ifeq ($(ARCH),tilepro)
 281        SRCARCH := tile
 282 endif
 283 ifeq ($(ARCH),tilegx)
 284        SRCARCH := tile
 285 endif
 286
 287 # Where to locate arch specific headers
 288 hdr-arch  := $(SRCARCH)
 289
 290 KCONFIG_CONFIG  ?= .config
 291 export KCONFIG_CONFIG
 292
 293 # SHELL used by kbuild
 294 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 295           else if [ -x /bin/bash ]; then echo /bin/bash; \
 296           else echo sh; fi ; fi)
 297
 298 HOSTCC       = gcc
 299 HOSTCXX      = g++
 300 HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89
 301 HOSTCXXFLAGS = -O2
 302
 303 ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1)
 304 HOSTCFLAGS  += -Wno-unused-value -Wno-unused-parameter \
 305                 -Wno-missing-field-initializers -fno-delete-null-pointer-checks
 306 endif
 307
 308 # Decide whether to build built-in, modular, or both.
 309 # Normally, just do built-in.
 310
 311 KBUILD_MODULES :=
 312 KBUILD_BUILTIN := 1
 313
 314 # If we have only "make modules", don't compile built-in objects.
 315 # When we're building modules with modversions, we need to consider
 316 # the built-in objects during the descend as well, in order to
 317 # make sure the checksums are up to date before we record them.
 318
 319 ifeq ($(MAKECMDGOALS),modules)
 320   KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
 321 endif
 322
 323 # If we have "make <whatever> modules", compile modules
 324 # in addition to whatever we do anyway.
 325 # Just "make" or "make all" shall build modules as well
 326
 327 ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
 328   KBUILD_MODULES := 1
 329 endif
 330
 331 ifeq ($(MAKECMDGOALS),)
 332   KBUILD_MODULES := 1
 333 endif
 334
 335 export KBUILD_MODULES KBUILD_BUILTIN
 336 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 337
 338 ifneq ($(CC),)
 339 ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
 340 COMPILER := clang
 341 else
 342 COMPILER := gcc
 343 endif
 344 export COMPILER
 345 endif
 346
 347 # Look for make include files relative to root of kernel src
 348 MAKEFLAGS += --include-dir=$(srctree)
 349
 350 # We need some generic definitions (do not try to remake the file).
 351 $(srctree)/scripts/Kbuild.include: ;
 352 include $(srctree)/scripts/Kbuild.include
 353
 354 # Make variables (CC, etc...)
 355 AS              = $(CROSS_COMPILE)as
 356 LD              = $(CROSS_COMPILE)ld
 357 CC              = $(CROSS_COMPILE)gcc
 358 CPP             = $(CC) -E
 359 AR              = $(CROSS_COMPILE)ar
 360 NM              = $(CROSS_COMPILE)nm
 361 STRIP           = $(CROSS_COMPILE)strip
 362 OBJCOPY         = $(CROSS_COMPILE)objcopy
 363 OBJDUMP         = $(CROSS_COMPILE)objdump
 364 AWK             = awk
 365 GENKSYMS        = scripts/genksyms/genksyms
 366 INSTALLKERNEL  := installkernel
 367 DEPMOD          = /sbin/depmod
 368 PERL            = perl
 369 PYTHON          = python
 370 CHECK           = sparse
 371
 372 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 373                   -Wbitwise -Wno-return-void $(CF)
 374 CFLAGS_MODULE   =
 375 AFLAGS_MODULE   =
 376 LDFLAGS_MODULE  =
 377 CFLAGS_KERNEL   =
 378 AFLAGS_KERNEL   =
 379 CFLAGS_GCOV     = -fprofile-arcs -ftest-coverage -fno-tree-loop-im
 380
 381
 382 # Use USERINCLUDE when you must reference the UAPI directories only.
 383 USERINCLUDE    := \
 384                 -I$(srctree)/arch/$(hdr-arch)/include/uapi \
 385                 -Iarch/$(hdr-arch)/include/generated/uapi \
 386                 -I$(srctree)/include/uapi \
 387                 -Iinclude/generated/uapi \
 388                 -include $(srctree)/include/linux/kconfig.h
 389
 390 # Use LINUXINCLUDE when you must reference the include/ directory.
 391 # Needed to be compatible with the O= option
 392 LINUXINCLUDE    := \
 393                 -I$(srctree)/arch/$(hdr-arch)/include \
 394                 -Iarch/$(hdr-arch)/include/generated \
 395                 $(if $(KBUILD_SRC), -I$(srctree)/include) \
 396                 -Iinclude \
 397                 $(USERINCLUDE)
 398
 399 KBUILD_CPPFLAGS := -D__KERNEL__
 400
 401 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 402                    -fno-strict-aliasing -fno-common \
 403                    -Werror-implicit-function-declaration \
 404                    -Wno-format-security \
 405                    -std=gnu89
 406
 407 KBUILD_AFLAGS_KERNEL :=
 408 KBUILD_CFLAGS_KERNEL :=
 409 KBUILD_AFLAGS   := -D__ASSEMBLY__
 410 KBUILD_AFLAGS_MODULE  := -DMODULE
 411 KBUILD_CFLAGS_MODULE  := -DMODULE
 412 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
 413
 414 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 415 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
 416 KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 417
 418 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 419 export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
 420 export CPP AR NM STRIP OBJCOPY OBJDUMP
 421 export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE
 422 export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
 423
 424 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
 425 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
 426 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 427 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 428 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
 429 export KBUILD_ARFLAGS
 430
 431 # When compiling out-of-tree modules, put MODVERDIR in the module
 432 # tree rather than in the kernel tree. The kernel tree might
 433 # even be read-only.
 434 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
 435
 436 # Files to ignore in find ... statements
 437
 438 export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o    \
 439                           -name CVS -o -name .pc -o -name .hg -o -name .git \) \
 440                           -prune -o
 441 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
 442                          --exclude CVS --exclude .pc --exclude .hg --exclude .git
 443
 444 # ===========================================================================
 445 # Rules shared between *config targets and build targets
 446
 447 # Basic helpers built in scripts/
 448 PHONY += scripts_basic
 449 scripts_basic:
 450         $(Q)$(MAKE) $(build)=scripts/basic
 451         $(Q)rm -f .tmp_quiet_recordmcount
 452
 453 # To avoid any implicit rule to kick in, define an empty command.
 454 scripts/basic/%: scripts_basic ;
 455
 456 PHONY += outputmakefile
 457 # outputmakefile generates a Makefile in the output directory, if using a
 458 # separate output directory. This allows convenient use of make in the
 459 # output directory.
 460 outputmakefile:
 461 ifneq ($(KBUILD_SRC),)
 462         $(Q)ln -fsn $(srctree) source
 463         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
 464             $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 465 endif
 466
 467 # Support for using generic headers in asm-generic
 468 PHONY += asm-generic
 469 asm-generic:
 470         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
 471                     src=asm obj=arch/$(SRCARCH)/include/generated/asm
 472         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
 473                     src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm
 474
 475 # To make sure we do not include .config for any of the *config targets
 476 # catch them early, and hand them over to scripts/kconfig/Makefile
 477 # It is allowed to specify more targets when calling make, including
 478 # mixing *config targets and build targets.
 479 # For example 'make oldconfig all'.
 480 # Detect when mixed targets is specified, and make a second invocation
 481 # of make so .config is not included in this case either (for *config).
 482
 483 version_h := include/generated/uapi/linux/version.h
 484
 485 no-dot-config-targets := clean mrproper distclean \
 486                          cscope gtags TAGS tags help %docs check% coccicheck \
 487                          $(version_h) headers_% archheaders archscripts \
 488                          kernelversion %src-pkg
 489
 490 config-targets := 0
 491 mixed-targets  := 0
 492 dot-config     := 1
 493
 494 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
 495         ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
 496                 dot-config := 0
 497         endif
 498 endif
 499
 500 ifeq ($(KBUILD_EXTMOD),)
 501         ifneq ($(filter config %config,$(MAKECMDGOALS)),)
 502                 config-targets := 1
 503                 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
 504                         mixed-targets := 1
 505                 endif
 506         endif
 507 endif
 508
 509 ifeq ($(mixed-targets),1)
 510 # ===========================================================================
 511 # We're called with mixed targets (*config and build targets).
 512 # Handle them one by one.
 513
 514 PHONY += $(MAKECMDGOALS) __build_one_by_one
 515
 516 $(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
 517         @:
 518
 519 __build_one_by_one:
 520         $(Q)set -e; \
 521         for i in $(MAKECMDGOALS); do \
 522                 $(MAKE) -f $(srctree)/Makefile $$i; \
 523         done
 524
 525 else
 526 ifeq ($(config-targets),1)
 527 # ===========================================================================
 528 # *config targets only - make sure prerequisites are updated, and descend
 529 # in scripts/kconfig to make the *config target
 530
 531 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
 532 # KBUILD_DEFCONFIG may point out an alternative default configuration
 533 # used for 'make defconfig'
 534 include $(srctree)/arch/$(SRCARCH)/Makefile
 535 export KBUILD_DEFCONFIG KBUILD_KCONFIG
 536
 537 config: scripts_basic outputmakefile FORCE
 538         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 539
 540 %config: scripts_basic outputmakefile FORCE
 541         $(Q)$(MAKE) $(build)=scripts/kconfig $@
 542
 543 else
 544 # ===========================================================================
 545 # Build targets only - this includes vmlinux, arch specific targets, clean
 546 # targets and others. In general all targets except *config targets.
 547
 548 ifeq ($(KBUILD_EXTMOD),)
 549 # Additional helpers built in scripts/
 550 # Carefully list dependencies so we do not try to build scripts twice
 551 # in parallel
 552 PHONY += scripts
 553 scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \
 554          asm-generic
 555         $(Q)$(MAKE) $(build)=$(@)
 556
 557 # Objects we will link into vmlinux / subdirs we need to visit
 558 init-y          := init/
 559 drivers-y       := drivers/ sound/ firmware/
 560 net-y           := net/
 561 libs-y          := lib/
 562 core-y          := usr/
 563 endif # KBUILD_EXTMOD
 564
 565 ifeq ($(dot-config),1)
 566 # Read in config
 567 -include include/config/auto.conf
 568
 569 ifeq ($(KBUILD_EXTMOD),)
 570 # Read in dependencies to all Kconfig* files, make sure to run
 571 # oldconfig if changes are detected.
 572 -include include/config/auto.conf.cmd
 573
 574 # To avoid any implicit rule to kick in, define an empty command
 575 $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 576
 577 # If .config is newer than include/config/auto.conf, someone tinkered
 578 # with it and forgot to run make oldconfig.
 579 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
 580 # we execute the config step to be sure to catch updated Kconfig files
 581 include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 582         $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 583 else
 584 # external modules needs include/generated/autoconf.h and include/config/auto.conf
 585 # but do not care if they are up-to-date. Use auto.conf to trigger the test
 586 PHONY += include/config/auto.conf
 587
 588 include/config/auto.conf:
 589         $(Q)test -e include/generated/autoconf.h -a -e $@ || (          \
 590         echo >&2;                                                       \
 591         echo >&2 "  ERROR: Kernel configuration is invalid.";           \
 592         echo >&2 "         include/generated/autoconf.h or $@ are missing.";\
 593         echo >&2 "         Run 'make oldconfig && make prepare' on kernel src to fix it.";      \
 594         echo >&2 ;                                                      \
 595         /bin/false)
 596
 597 endif # KBUILD_EXTMOD
 598
 599 else
 600 # Dummy target needed, because used as prerequisite
 601 include/config/auto.conf: ;
 602 endif # $(dot-config)
 603
 604 # The all: target is the default when no target is given on the
 605 # command line.
 606 # This allow a user to issue only 'make' to build a kernel including modules
 607 # Defaults to vmlinux, but the arch makefile usually adds further targets
 608 all: vmlinux
 609
 610 include $(srctree)/arch/$(SRCARCH)/Makefile
 611
 612 KBUILD_CFLAGS   += $(call cc-option,-fno-delete-null-pointer-checks,)
 613 KBUILD_CFLAGS   += $(call cc-disable-warning,frame-address,)
 614 KBUILD_CFLAGS   += $(call cc-disable-warning, format-truncation)
 615 KBUILD_CFLAGS   += $(call cc-disable-warning, format-overflow)
 616 KBUILD_CFLAGS   += $(call cc-disable-warning, int-in-bool-context)
 617 KBUILD_CFLAGS   += $(call cc-option,-fno-PIE)
 618 KBUILD_AFLAGS   += $(call cc-option,-fno-PIE)
 619
 620 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 621 KBUILD_CFLAGS   += -Os $(call cc-disable-warning,maybe-uninitialized,)
 622 else
 623 KBUILD_CFLAGS   += -O2
 624 endif
 625
 626 # Tell gcc to never replace conditional load with a non-conditional one
 627 KBUILD_CFLAGS   += $(call cc-option,--param=allow-store-data-races=0)
 628
 629 ifdef CONFIG_READABLE_ASM
 630 # Disable optimizations that make assembler listings hard to read.
 631 # reorder blocks reorders the control in the function
 632 # ipa clone creates specialized cloned functions
 633 # partial inlining inlines only parts of functions
 634 KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \
 635                  $(call cc-option,-fno-ipa-cp-clone,) \
 636                  $(call cc-option,-fno-partial-inlining)
 637 endif
 638
 639 ifneq ($(CONFIG_FRAME_WARN),0)
 640 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 641 endif
 642
 643 # Handle stack protector mode.
 644 #
 645 # Since kbuild can potentially perform two passes (first with the old
 646 # .config values and then with updated .config values), we cannot error out
 647 # if a desired compiler option is unsupported. If we were to error, kbuild
 648 # could never get to the second pass and actually notice that we changed
 649 # the option to something that was supported.
 650 #
 651 # Additionally, we don't want to fallback and/or silently change which compiler
 652 # flags will be used, since that leads to producing kernels with different
 653 # security feature characteristics depending on the compiler used. ("But I
 654 # selected CC_STACKPROTECTOR_STRONG! Why did it build with _REGULAR?!")
 655 #
 656 # The middle ground is to warn here so that the failed option is obvious, but
 657 # to let the build fail with bad compiler flags so that we can't produce a
 658 # kernel when there is a CONFIG and compiler mismatch.
 659 #
 660 ifdef CONFIG_CC_STACKPROTECTOR_REGULAR
 661   stackp-flag := -fstack-protector
 662   ifeq ($(call cc-option, $(stackp-flag)),)
 663     $(warning Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: \
 664              -fstack-protector not supported by compiler)
 665   endif
 666 else
 667 ifdef CONFIG_CC_STACKPROTECTOR_STRONG
 668   stackp-flag := -fstack-protector-strong
 669   ifeq ($(call cc-option, $(stackp-flag)),)
 670     $(warning Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: \
 671               -fstack-protector-strong not supported by compiler)
 672   endif
 673 else
 674   # Force off for distro compilers that enable stack protector by default.
 675   stackp-flag := $(call cc-option, -fno-stack-protector)
 676 endif
 677 endif
 678 KBUILD_CFLAGS += $(stackp-flag)
 679
 680 ifeq ($(COMPILER),clang)
 681 KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
 682 KBUILD_CPPFLAGS += $(call cc-option,-Wno-unknown-warning-option,)
 683 KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable)
 684 KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
 685 KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
 686 # Quiet clang warning: comparison of unsigned expression < 0 is always false
 687 KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
 688 # CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
 689 # source of a reference will be _MergedGlobals and not on of the whitelisted names.
 690 # See modpost pattern 2
 691 KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
 692 KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
 693 else
 694
 695 # These warnings generated too much noise in a regular build.
 696 # Use make W=1 to enable them (see scripts/Makefile.build)
 697 KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
 698 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
 699 endif
 700
 701 ifdef CONFIG_FRAME_POINTER
 702 KBUILD_CFLAGS   += -fno-omit-frame-pointer -fno-optimize-sibling-calls
 703 else
 704 # Some targets (ARM with Thumb2, for example), can't be built with frame
 705 # pointers.  For those, we don't have FUNCTION_TRACER automatically
 706 # select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
 707 # incompatible with -fomit-frame-pointer with current GCC, so we don't use
 708 # -fomit-frame-pointer with FUNCTION_TRACER.
 709 ifndef CONFIG_FUNCTION_TRACER
 710 KBUILD_CFLAGS   += -fomit-frame-pointer
 711 endif
 712 endif
 713
 714 KBUILD_CFLAGS   += $(call cc-option, -fno-var-tracking-assignments)
 715
 716 ifdef CONFIG_DEBUG_INFO
 717 ifdef CONFIG_DEBUG_INFO_SPLIT
 718 KBUILD_CFLAGS   += $(call cc-option, -gsplit-dwarf, -g)
 719 else
 720 KBUILD_CFLAGS   += -g
 721 endif
 722 KBUILD_AFLAGS   += -Wa,-gdwarf-2
 723 endif
 724 ifdef CONFIG_DEBUG_INFO_DWARF4
 725 KBUILD_CFLAGS   += $(call cc-option, -gdwarf-4,)
 726 endif
 727
 728 ifdef CONFIG_DEBUG_INFO_REDUCED
 729 KBUILD_CFLAGS   += $(call cc-option, -femit-struct-debug-baseonly) \
 730                    $(call cc-option,-fno-var-tracking)
 731 endif
 732
 733 ifdef CONFIG_FUNCTION_TRACER
 734 ifdef CONFIG_HAVE_FENTRY
 735 CC_USING_FENTRY := $(call cc-option, -mfentry -DCC_USING_FENTRY)
 736 endif
 737 KBUILD_CFLAGS   += -pg $(CC_USING_FENTRY)
 738 KBUILD_AFLAGS   += $(CC_USING_FENTRY)
 739 ifdef CONFIG_DYNAMIC_FTRACE
 740         ifdef CONFIG_HAVE_C_RECORDMCOUNT
 741                 BUILD_C_RECORDMCOUNT := y
 742                 export BUILD_C_RECORDMCOUNT
 743         endif
 744 endif
 745 endif
 746
 747 # We trigger additional mismatches with less inlining
 748 ifdef CONFIG_DEBUG_SECTION_MISMATCH
 749 KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
 750 endif
 751
 752 # arch Makefile may override CC so keep this after arch Makefile is included
 753 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 754 CHECKFLAGS     += $(NOSTDINC_FLAGS)
 755
 756 # warn about C99 declaration after statement
 757 KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 758
 759 # disable pointer signed / unsigned warnings in gcc 4.0
 760 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
 761
 762 # disable invalid "can't wrap" optimizations for signed / pointers
 763 KBUILD_CFLAGS   += $(call cc-option,-fno-strict-overflow)
 764
 765 # Make sure -fstack-check isn't enabled (like gentoo apparently did)
 766 KBUILD_CFLAGS  += $(call cc-option,-fno-stack-check,)
 767
 768 # conserve stack if available
 769 KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
 770
 771 # disallow errors like 'EXPORT_GPL(foo);' with missing header
 772 KBUILD_CFLAGS   += $(call cc-option,-Werror=implicit-int)
 773
 774 # require functions to have arguments in prototypes, not empty 'int foo()'
 775 KBUILD_CFLAGS   += $(call cc-option,-Werror=strict-prototypes)
 776
 777 # Prohibit date/time macros, which would make the build non-deterministic
 778 KBUILD_CFLAGS   += $(call cc-option,-Werror=date-time)
 779
 780 # use the deterministic mode of AR if available
 781 KBUILD_ARFLAGS := $(call ar-option,D)
 782
 783 # check for 'asm goto'
 784 ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
 785         KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
 786 endif
 787
 788 include $(srctree)/scripts/Makefile.extrawarn
 789
 790 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 791 KBUILD_CPPFLAGS += $(KCPPFLAGS)
 792 KBUILD_AFLAGS += $(KAFLAGS)
 793 KBUILD_CFLAGS += $(KCFLAGS)
 794
 795 # Use --build-id when available.
 796 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
 797                               $(call cc-ldoption, -Wl$(comma)--build-id,))
 798 KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
 799 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
 800
 801 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
 802 LDFLAGS_vmlinux += $(call ld-option, -X,)
 803 endif
 804
 805 # Default kernel image to build when no specific target is given.
 806 # KBUILD_IMAGE may be overruled on the command line or
 807 # set in the environment
 808 # Also any assignments in arch/$(ARCH)/Makefile take precedence over
 809 # this default value
 810 export KBUILD_IMAGE ?= vmlinux
 811
 812 #
 813 # INSTALL_PATH specifies where to place the updated kernel and system map
 814 # images. Default is /boot, but you can set it to other values
 815 export  INSTALL_PATH ?= /boot
 816
 817 #
 818 # INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots.
 819 # Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as
 820 # an argument if needed. Otherwise it defaults to the kernel install path
 821 #
 822 export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE)
 823
 824 #
 825 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
 826 # relocations required by build roots.  This is not defined in the
 827 # makefile but the argument can be passed to make if needed.
 828 #
 829
 830 MODLIB  = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
 831 export MODLIB
 832
 833 #
 834 # INSTALL_MOD_STRIP, if defined, will cause modules to be
 835 # stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
 836 # the default option --strip-debug will be used.  Otherwise,
 837 # INSTALL_MOD_STRIP value will be used as the options to the strip command.
 838
 839 ifdef INSTALL_MOD_STRIP
 840 ifeq ($(INSTALL_MOD_STRIP),1)
 841 mod_strip_cmd = $(STRIP) --strip-debug
 842 else
 843 mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
 844 endif # INSTALL_MOD_STRIP=1
 845 else
 846 mod_strip_cmd = true
 847 endif # INSTALL_MOD_STRIP
 848 export mod_strip_cmd
 849
 850 # CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed
 851 # after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP
 852 # or CONFIG_MODULE_COMPRESS_XZ.
 853
 854 mod_compress_cmd = true
 855 ifdef CONFIG_MODULE_COMPRESS
 856   ifdef CONFIG_MODULE_COMPRESS_GZIP
 857     mod_compress_cmd = gzip -n
 858   endif # CONFIG_MODULE_COMPRESS_GZIP
 859   ifdef CONFIG_MODULE_COMPRESS_XZ
 860     mod_compress_cmd = xz
 861   endif # CONFIG_MODULE_COMPRESS_XZ
 862 endif # CONFIG_MODULE_COMPRESS
 863 export mod_compress_cmd
 864
 865 # Select initial ramdisk compression format, default is gzip(1).
 866 # This shall be used by the dracut(8) tool while creating an initramfs image.
 867 #
 868 INITRD_COMPRESS-y                  := gzip
 869 INITRD_COMPRESS-$(CONFIG_RD_BZIP2) := bzip2
 870 INITRD_COMPRESS-$(CONFIG_RD_LZMA)  := lzma
 871 INITRD_COMPRESS-$(CONFIG_RD_XZ)    := xz
 872 INITRD_COMPRESS-$(CONFIG_RD_LZO)   := lzo
 873 INITRD_COMPRESS-$(CONFIG_RD_LZ4)   := lz4
 874 # do not export INITRD_COMPRESS, since we didn't actually
 875 # choose a sane default compression above.
 876 # export INITRD_COMPRESS := $(INITRD_COMPRESS-y)
 877
 878 ifdef CONFIG_MODULE_SIG_ALL
 879 MODSECKEY = ./signing_key.priv
 880 MODPUBKEY = ./signing_key.x509
 881 export MODPUBKEY
 882 mod_sign_cmd = perl $(srctree)/scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODSECKEY) $(MODPUBKEY)
 883 else
 884 mod_sign_cmd = true
 885 endif
 886 export mod_sign_cmd
 887
 888
 889 ifeq ($(KBUILD_EXTMOD),)
 890 core-y          += kernel/ mm/ fs/ ipc/ security/ crypto/ block/
 891
 892 vmlinux-dirs    := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
 893                      $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
 894                      $(net-y) $(net-m) $(libs-y) $(libs-m)))
 895
 896 vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
 897                      $(init-) $(core-) $(drivers-) $(net-) $(libs-))))
 898
 899 init-y          := $(patsubst %/, %/built-in.o, $(init-y))
 900 core-y          := $(patsubst %/, %/built-in.o, $(core-y))
 901 drivers-y       := $(patsubst %/, %/built-in.o, $(drivers-y))
 902 net-y           := $(patsubst %/, %/built-in.o, $(net-y))
 903 libs-y1         := $(patsubst %/, %/lib.a, $(libs-y))
 904 libs-y2         := $(patsubst %/, %/built-in.o, $(libs-y))
 905 libs-y          := $(libs-y1) $(libs-y2)
 906
 907 # Externally visible symbols (used by link-vmlinux.sh)
 908 export KBUILD_VMLINUX_INIT := $(head-y) $(init-y)
 909 export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y)
 910 export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
 911 export LDFLAGS_vmlinux
 912 # used by scripts/pacmage/Makefile
 913 export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) arch Documentation include samples scripts tools virt)
 914
 915 vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN)
 916
 917 # Final link of vmlinux
 918       cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux)
 919 quiet_cmd_link-vmlinux = LINK    $@
 920
 921 # Include targets which we want to
 922 # execute if the rest of the kernel build went well.
 923 vmlinux: scripts/link-vmlinux.sh $(vmlinux-deps) FORCE
 924 ifdef CONFIG_HEADERS_CHECK
 925         $(Q)$(MAKE) -f $(srctree)/Makefile headers_check
 926 endif
 927 ifdef CONFIG_SAMPLES
 928         $(Q)$(MAKE) $(build)=samples
 929 endif
 930 ifdef CONFIG_BUILD_DOCSRC
 931         $(Q)$(MAKE) $(build)=Documentation
 932 endif
 933         +$(call if_changed,link-vmlinux)
 934
 935 # The actual objects are generated when descending,
 936 # make sure no implicit rule kicks in
 937 $(sort $(vmlinux-deps)): $(vmlinux-dirs) ;
 938
 939 # Handle descending into subdirectories listed in $(vmlinux-dirs)
 940 # Preset locale variables to speed up the build process. Limit locale
 941 # tweaks to this spot to avoid wrong language settings when running
 942 # make menuconfig etc.
 943 # Error messages still appears in the original language
 944
 945 PHONY += $(vmlinux-dirs)
 946 $(vmlinux-dirs): prepare scripts
 947         $(Q)$(MAKE) $(build)=$@
 948
 949 define filechk_kernel.release
 950         echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
 951 endef
 952
 953 # Store (new) KERNELRELEASE string in include/config/kernel.release
 954 include/config/kernel.release: include/config/auto.conf FORCE
 955         $(call filechk,kernel.release)
 956
 957
 958 # Things we need to do before we recursively start building the kernel
 959 # or the modules are listed in "prepare".
 960 # A multi level approach is used. prepareN is processed before prepareN-1.
 961 # archprepare is used in arch Makefiles and when processed asm symlink,
 962 # version.h and scripts_basic is processed / created.
 963
 964 # Listed in dependency order
 965 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
 966
 967 # prepare3 is used to check if we are building in a separate output directory,
 968 # and if so do:
 969 # 1) Check that make has not been executed in the kernel src $(srctree)
 970 prepare3: include/config/kernel.release
 971 ifneq ($(KBUILD_SRC),)
 972         @$(kecho) '  Using $(srctree) as source for kernel'
 973         $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
 974                 echo >&2 "  $(srctree) is not clean, please run 'make mrproper'"; \
 975                 echo >&2 "  in the '$(srctree)' directory.";\
 976                 /bin/false; \
 977         fi;
 978 endif
 979
 980 # prepare2 creates a makefile if using a separate output directory
 981 prepare2: prepare3 outputmakefile asm-generic
 982
 983 prepare1: prepare2 $(version_h) include/generated/utsrelease.h \
 984                    include/config/auto.conf
 985         $(cmd_crmodverdir)
 986
 987 archprepare: archheaders archscripts prepare1 scripts_basic
 988
 989 prepare0: archprepare FORCE
 990         $(Q)$(MAKE) $(build)=.
 991
 992 # All the preparing..
 993 prepare: prepare0
 994
 995 # Generate some files
 996 # ---------------------------------------------------------------------------
 997
 998 # KERNELRELEASE can change from a few different places, meaning version.h
 999 # needs to be updated, so this check is forced on all builds
1000
1001 uts_len := 64
1002 define filechk_utsrelease.h
1003         if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
1004           echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
1005           exit 1;                                                         \
1006         fi;                                                               \
1007         (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
1008 endef
1009
1010 define filechk_version.h
1011         (echo \#define LINUX_VERSION_CODE $(shell                         \
1012         expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
1013         echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
1014 endef
1015
1016 $(version_h): $(srctree)/Makefile FORCE
1017         $(call filechk,version.h)
1018
1019 include/generated/utsrelease.h: include/config/kernel.release FORCE
1020         $(call filechk,utsrelease.h)
1021
1022 PHONY += headerdep
1023 headerdep:
1024         $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
1025         $(srctree)/scripts/headerdep.pl -I$(srctree)/include
1026
1027 # ---------------------------------------------------------------------------
1028
1029 PHONY += depend dep
1030 depend dep:
1031         @echo '*** Warning: make $@ is unnecessary now.'
1032
1033 # ---------------------------------------------------------------------------
1034 # Firmware install
1035 INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
1036 export INSTALL_FW_PATH
1037
1038 PHONY += firmware_install
1039 firmware_install: FORCE
1040         @mkdir -p $(objtree)/firmware
1041         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
1042
1043 # ---------------------------------------------------------------------------
1044 # Kernel headers
1045
1046 #Default location for installed headers
1047 export INSTALL_HDR_PATH = $(objtree)/usr
1048
1049 hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
1050
1051 # If we do an all arch process set dst to asm-$(hdr-arch)
1052 hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
1053
1054 PHONY += archheaders
1055 archheaders:
1056
1057 PHONY += archscripts
1058 archscripts:
1059
1060 PHONY += __headers
1061 __headers: $(version_h) scripts_basic asm-generic archheaders archscripts FORCE
1062         $(Q)$(MAKE) $(build)=scripts build_unifdef
1063
1064 PHONY += headers_install_all
1065 headers_install_all:
1066         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
1067
1068 PHONY += headers_install
1069 headers_install: __headers
1070         $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \
1071           $(error Headers not exportable for the $(SRCARCH) architecture))
1072         $(Q)$(MAKE) $(hdr-inst)=include/uapi
1073         $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst)
1074
1075 PHONY += headers_check_all
1076 headers_check_all: headers_install_all
1077         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
1078
1079 PHONY += headers_check
1080 headers_check: headers_install
1081         $(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
1082         $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1
1083
1084 # ---------------------------------------------------------------------------
1085 # Kernel selftest
1086
1087 PHONY += kselftest
1088 kselftest:
1089         $(Q)$(MAKE) -C tools/testing/selftests run_tests
1090
1091 # ---------------------------------------------------------------------------
1092 # Modules
1093
1094 ifdef CONFIG_MODULES
1095
1096 # By default, build modules as well
1097
1098 all: modules
1099
1100 # Build modules
1101 #
1102 # A module can be listed more than once in obj-m resulting in
1103 # duplicate lines in modules.order files.  Those are removed
1104 # using awk while concatenating to the final file.
1105
1106 PHONY += modules
1107 modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
1108         $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
1109         @$(kecho) '  Building modules, stage 2.';
1110         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1111         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
1112
1113 modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
1114         $(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
1115
1116 %/modules.builtin: include/config/auto.conf
1117         $(Q)$(MAKE) $(modbuiltin)=$*
1118
1119
1120 # Target to prepare building external modules
1121 PHONY += modules_prepare
1122 modules_prepare: prepare scripts
1123
1124 # Target to install modules
1125 PHONY += modules_install
1126 modules_install: _modinst_ _modinst_post
1127
1128 PHONY += _modinst_
1129 _modinst_:
1130         @rm -rf $(MODLIB)/kernel
1131         @rm -f $(MODLIB)/source
1132         @mkdir -p $(MODLIB)/kernel
1133         @ln -s `cd $(srctree) && /bin/pwd` $(MODLIB)/source
1134         @if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
1135                 rm -f $(MODLIB)/build ; \
1136                 ln -s $(CURDIR) $(MODLIB)/build ; \
1137         fi
1138         @cp -f $(objtree)/modules.order $(MODLIB)/
1139         @cp -f $(objtree)/modules.builtin $(MODLIB)/
1140         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1141
1142 # This depmod is only for convenience to give the initial
1143 # boot a modules.dep even before / is mounted read-write.  However the
1144 # boot script depmod is the master version.
1145 PHONY += _modinst_post
1146 _modinst_post: _modinst_
1147         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
1148         $(call cmd,depmod)
1149
1150 ifeq ($(CONFIG_MODULE_SIG), y)
1151 PHONY += modules_sign
1152 modules_sign:
1153         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign
1154 endif
1155
1156 else # CONFIG_MODULES
1157
1158 # Modules not configured
1159 # ---------------------------------------------------------------------------
1160
1161 modules modules_install: FORCE
1162         @echo >&2
1163         @echo >&2 "The present kernel configuration has modules disabled."
1164         @echo >&2 "Type 'make config' and enable loadable module support."
1165         @echo >&2 "Then build a kernel with module support enabled."
1166         @echo >&2
1167         @exit 1
1168
1169 endif # CONFIG_MODULES
1170
1171 ###
1172 # Cleaning is done on three levels.
1173 # make clean     Delete most generated files
1174 #                Leave enough to build external modules
1175 # make mrproper  Delete the current configuration, and all generated files
1176 # make distclean Remove editor backup files, patch leftover files and the like
1177
1178 # Directories & files removed with 'make clean'
1179 CLEAN_DIRS  += $(MODVERDIR)
1180
1181 # Directories & files removed with 'make mrproper'
1182 MRPROPER_DIRS  += include/config usr/include include/generated          \
1183                   arch/*/include/generated .tmp_objdiff
1184 MRPROPER_FILES += .config .config.old .version .old_version $(version_h) \
1185                   Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
1186                   signing_key.priv signing_key.x509 x509.genkey         \
1187                   extra_certificates signing_key.x509.keyid             \
1188                   signing_key.x509.signer include/linux/version.h
1189
1190 # clean - Delete most, but leave enough to build external modules
1191 #
1192 clean: rm-dirs  := $(CLEAN_DIRS)
1193 clean: rm-files := $(CLEAN_FILES)
1194 clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation samples)
1195
1196 PHONY += $(clean-dirs) clean archclean vmlinuxclean
1197 $(clean-dirs):
1198         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1199
1200 vmlinuxclean:
1201         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
1202
1203 clean: archclean vmlinuxclean
1204
1205 # mrproper - Delete all generated files, including .config
1206 #
1207 mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
1208 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1209 mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
1210
1211 PHONY += $(mrproper-dirs) mrproper archmrproper
1212 $(mrproper-dirs):
1213         $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1214
1215 mrproper: clean archmrproper $(mrproper-dirs)
1216         $(call cmd,rmdirs)
1217         $(call cmd,rmfiles)
1218
1219 # distclean
1220 #
1221 PHONY += distclean
1222
1223 distclean: mrproper
1224         @find $(srctree) $(RCS_FIND_IGNORE) \
1225                 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1226                 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1227                 -o -name '.*.rej' -o -name '*%'  -o -name 'core' \) \
1228                 -type f -print | xargs rm -f
1229
1230
1231 # Packaging of the kernel to various formats
1232 # ---------------------------------------------------------------------------
1233 # rpm target kept for backward compatibility
1234 package-dir     := scripts/package
1235
1236 %src-pkg: FORCE
1237         $(Q)$(MAKE) $(build)=$(package-dir) $@
1238 %pkg: include/config/kernel.release FORCE
1239         $(Q)$(MAKE) $(build)=$(package-dir) $@
1240 rpm: include/config/kernel.release FORCE
1241         $(Q)$(MAKE) $(build)=$(package-dir) $@
1242
1243
1244 # Brief documentation of the typical targets used
1245 # ---------------------------------------------------------------------------
1246
1247 boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
1248 boards := $(notdir $(boards))
1249 board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
1250 board-dirs := $(sort $(notdir $(board-dirs:/=)))
1251
1252 help:
1253         @echo  'Cleaning targets:'
1254         @echo  '  clean           - Remove most generated files but keep the config and'
1255         @echo  '                    enough build support to build external modules'
1256         @echo  '  mrproper        - Remove all generated files + config + various backup files'
1257         @echo  '  distclean       - mrproper + remove editor backup and patch files'
1258         @echo  ''
1259         @echo  'Configuration targets:'
1260         @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1261         @echo  ''
1262         @echo  'Other generic targets:'
1263         @echo  '  all             - Build all targets marked with [*]'
1264         @echo  '* vmlinux         - Build the bare kernel'
1265         @echo  '* modules         - Build all modules'
1266         @echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1267         @echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
1268         @echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
1269         @echo  '  dir/            - Build all files in dir and below'
1270         @echo  '  dir/file.[oisS] - Build specified target only'
1271         @echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
1272         @echo  '                    (requires a recent binutils and recent build (System.map))'
1273         @echo  '  dir/file.ko     - Build module including final link'
1274         @echo  '  modules_prepare - Set up for building external modules'
1275         @echo  '  tags/TAGS       - Generate tags file for editors'
1276         @echo  '  cscope          - Generate cscope index'
1277         @echo  '  gtags           - Generate GNU GLOBAL index'
1278         @echo  '  kernelrelease   - Output the release version string (use with make -s)'
1279         @echo  '  kernelversion   - Output the version stored in Makefile (use with make -s)'
1280         @echo  '  image_name      - Output the image name (use with make -s)'
1281         @echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1282          echo  '                    (default: $(INSTALL_HDR_PATH))'; \
1283          echo  ''
1284         @echo  'Static analysers'
1285         @echo  '  checkstack      - Generate a list of stack hogs'
1286         @echo  '  namespacecheck  - Name space analysis on compiled kernel'
1287         @echo  '  versioncheck    - Sanity check on version.h usage'
1288         @echo  '  includecheck    - Check for duplicate included header files'
1289         @echo  '  export_report   - List the usages of all exported symbols'
1290         @echo  '  headers_check   - Sanity check on exported headers'
1291         @echo  '  headerdep       - Detect inclusion cycles in headers'
1292         @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
1293         @echo  ''
1294         @echo  'Kernel selftest'
1295         @echo  '  kselftest       - Build and run kernel selftest (run as root)'
1296         @echo  '                    Build, install, and boot kernel before'
1297         @echo  '                    running kselftest on it'
1298         @echo  ''
1299         @echo  'Kernel packaging:'
1300         @$(MAKE) $(build)=$(package-dir) help
1301         @echo  ''
1302         @echo  'Documentation targets:'
1303         @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
1304         @echo  ''
1305         @echo  'Architecture specific targets ($(SRCARCH)):'
1306         @$(if $(archhelp),$(archhelp),\
1307                 echo '  No architecture specific help defined for $(SRCARCH)')
1308         @echo  ''
1309         @$(if $(boards), \
1310                 $(foreach b, $(boards), \
1311                 printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
1312                 echo '')
1313         @$(if $(board-dirs), \
1314                 $(foreach b, $(board-dirs), \
1315                 printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
1316                 printf "  %-16s - Show all of the above\\n" help-boards; \
1317                 echo '')
1318
1319         @echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1320         @echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
1321         @echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1322         @echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
1323         @echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1324         @echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1325         @echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
1326         @echo  '                1: warnings which may be relevant and do not occur too often'
1327         @echo  '                2: warnings which occur quite often but may still be relevant'
1328         @echo  '                3: more obscure warnings, can most likely be ignored'
1329         @echo  '                Multiple levels can be combined with W=12 or W=123'
1330         @echo  ''
1331         @echo  'Execute "make" or "make all" to build all targets marked with [*] '
1332         @echo  'For further info see the ./README file'
1333
1334
1335 help-board-dirs := $(addprefix help-,$(board-dirs))
1336
1337 help-boards: $(help-board-dirs)
1338
1339 boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
1340
1341 $(help-board-dirs): help-%:
1342         @echo  'Architecture specific targets ($(SRCARCH) $*):'
1343         @$(if $(boards-per-dir), \
1344                 $(foreach b, $(boards-per-dir), \
1345                 printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
1346                 echo '')
1347
1348
1349 # Documentation targets
1350 # ---------------------------------------------------------------------------
1351 %docs: scripts_basic FORCE
1352         $(Q)$(MAKE) $(build)=scripts build_docproc
1353         $(Q)$(MAKE) $(build)=Documentation/DocBook $@
1354
1355 else # KBUILD_EXTMOD
1356
1357 ###
1358 # External module support.
1359 # When building external modules the kernel used as basis is considered
1360 # read-only, and no consistency checks are made and the make
1361 # system is not used on the basis kernel. If updates are required
1362 # in the basis kernel ordinary make commands (without M=...) must
1363 # be used.
1364 #
1365 # The following are the only valid targets when building external
1366 # modules.
1367 # make M=dir clean     Delete all automatically generated files
1368 # make M=dir modules   Make all modules in specified dir
1369 # make M=dir           Same as 'make M=dir modules'
1370 # make M=dir modules_install
1371 #                      Install the modules built in the module directory
1372 #                      Assumes install directory is already created
1373
1374 # We are always building modules
1375 KBUILD_MODULES := 1
1376 PHONY += crmodverdir
1377 crmodverdir:
1378         $(cmd_crmodverdir)
1379
1380 PHONY += $(objtree)/Module.symvers
1381 $(objtree)/Module.symvers:
1382         @test -e $(objtree)/Module.symvers || ( \
1383         echo; \
1384         echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
1385         echo "           is missing; modules will have no dependencies and modversions."; \
1386         echo )
1387
1388 module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
1389 PHONY += $(module-dirs) modules
1390 $(module-dirs): crmodverdir $(objtree)/Module.symvers
1391         $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
1392
1393 modules: $(module-dirs)
1394         @$(kecho) '  Building modules, stage 2.';
1395         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1396
1397 PHONY += modules_install
1398 modules_install: _emodinst_ _emodinst_post
1399
1400 install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
1401 PHONY += _emodinst_
1402 _emodinst_:
1403         $(Q)mkdir -p $(MODLIB)/$(install-dir)
1404         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1405
1406 PHONY += _emodinst_post
1407 _emodinst_post: _emodinst_
1408         $(call cmd,depmod)
1409
1410 clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
1411
1412 PHONY += $(clean-dirs) clean
1413 $(clean-dirs):
1414         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1415
1416 clean:  rm-dirs := $(MODVERDIR)
1417 clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
1418
1419 help:
1420         @echo  '  Building external modules.'
1421         @echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
1422         @echo  ''
1423         @echo  '  modules         - default target, build the module(s)'
1424         @echo  '  modules_install - install the module'
1425         @echo  '  clean           - remove generated files in module directory only'
1426         @echo  ''
1427
1428 # Dummies...
1429 PHONY += prepare scripts
1430 prepare: ;
1431 scripts: ;
1432 endif # KBUILD_EXTMOD
1433
1434 clean: $(clean-dirs)
1435         $(call cmd,rmdirs)
1436         $(call cmd,rmfiles)
1437         @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1438                 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1439                 -o -name '*.ko.*' \
1440                 -o -name '*.dwo'  \
1441                 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1442                 -o -name '*.symtypes' -o -name 'modules.order' \
1443                 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1444                 -o -name '*.gcno' \) -type f -print | xargs rm -f
1445
1446 # Generate tags for editors
1447 # ---------------------------------------------------------------------------
1448 quiet_cmd_tags = GEN     $@
1449       cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
1450
1451 tags TAGS cscope gtags: FORCE
1452         $(call cmd,tags)
1453
1454 # Scripts to check various things for consistency
1455 # ---------------------------------------------------------------------------
1456
1457 PHONY += includecheck versioncheck coccicheck namespacecheck export_report
1458
1459 includecheck:
1460         find $(srctree)/* $(RCS_FIND_IGNORE) \
1461                 -name '*.[hcS]' -type f -print | sort \
1462                 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
1463
1464 versioncheck:
1465         find $(srctree)/* $(RCS_FIND_IGNORE) \
1466                 -name '*.[hcS]' -type f -print | sort \
1467                 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
1468
1469 coccicheck:
1470         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
1471
1472 namespacecheck:
1473         $(PERL) $(srctree)/scripts/namespace.pl
1474
1475 export_report:
1476         $(PERL) $(srctree)/scripts/export_report.pl
1477
1478 endif #ifeq ($(config-targets),1)
1479 endif #ifeq ($(mixed-targets),1)
1480
1481 PHONY += checkstack kernelrelease kernelversion image_name
1482
1483 # UML needs a little special treatment here.  It wants to use the host
1484 # toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
1485 # else wants $(ARCH), including people doing cross-builds, which means
1486 # that $(SUBARCH) doesn't work here.
1487 ifeq ($(ARCH), um)
1488 CHECKSTACK_ARCH := $(SUBARCH)
1489 else
1490 CHECKSTACK_ARCH := $(ARCH)
1491 endif
1492 checkstack:
1493         $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
1494         $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
1495
1496 kernelrelease:
1497         @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1498
1499 kernelversion:
1500         @echo $(KERNELVERSION)
1501
1502 image_name:
1503         @echo $(KBUILD_IMAGE)
1504
1505 # Clear a bunch of variables before executing the submake
1506 tools/: FORCE
1507         $(Q)mkdir -p $(objtree)/tools
1508         $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(objtree) subdir=tools -C $(src)/tools/
1509
1510 tools/%: FORCE
1511         $(Q)mkdir -p $(objtree)/tools
1512         $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(objtree) subdir=tools -C $(src)/tools/ $*
1513
1514 # Single targets
1515 # ---------------------------------------------------------------------------
1516 # Single targets are compatible with:
1517 # - build with mixed source and output
1518 # - build with separate output dir 'make O=...'
1519 # - external modules
1520 #
1521 #  target-dir => where to store outputfile
1522 #  build-dir  => directory in kernel source tree to use
1523
1524 ifeq ($(KBUILD_EXTMOD),)
1525         build-dir  = $(patsubst %/,%,$(dir $@))
1526         target-dir = $(dir $@)
1527 else
1528         zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1529         build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1530         target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1531 endif
1532
1533 %.s: %.c prepare scripts FORCE
1534         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1535 %.i: %.c prepare scripts FORCE
1536         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1537 %.o: %.c prepare scripts FORCE
1538         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1539 %.lst: %.c prepare scripts FORCE
1540         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1541 %.s: %.S prepare scripts FORCE
1542         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1543 %.o: %.S prepare scripts FORCE
1544         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1545 %.symtypes: %.c prepare scripts FORCE
1546         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1547
1548 # Modules
1549 /: prepare scripts FORCE
1550         $(cmd_crmodverdir)
1551         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1552         $(build)=$(build-dir)
1553 # Make sure the latest headers are built for Documentation
1554 Documentation/: headers_install
1555 %/: prepare scripts FORCE
1556         $(cmd_crmodverdir)
1557         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1558         $(build)=$(build-dir)
1559 %.ko: prepare scripts FORCE
1560         $(cmd_crmodverdir)
1561         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
1562         $(build)=$(build-dir) $(@:.ko=.o)
1563         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1564
1565 # FIXME Should go into a make.lib or something
1566 # ===========================================================================
1567
1568 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
1569       cmd_rmdirs = rm -rf $(rm-dirs)
1570
1571 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
1572       cmd_rmfiles = rm -f $(rm-files)
1573
1574 # Run depmod only if we have System.map and depmod is executable
1575 quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
1576       cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
1577                    $(KERNELRELEASE) "$(patsubst y,_,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))"
1578
1579 # Create temporary dir for module support files
1580 # clean it up only when building all modules
1581 cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
1582                   $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
1583
1584 # read all saved command lines
1585
1586 targets := $(wildcard $(sort $(targets)))
1587 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1588
1589 ifneq ($(cmd_files),)
1590   $(cmd_files): ;       # Do not try to update included dependency files
1591   include $(cmd_files)
1592 endif
1593
1594 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1595 # Usage:
1596 # $(Q)$(MAKE) $(clean)=dir
1597 clean := -f $(srctree)/scripts/Makefile.clean obj
1598
1599 endif   # skip-makefile
1600
1601 PHONY += FORCE
1602 FORCE:
1603
1604 # Declare the contents of the .PHONY variable as phony.  We keep that
1605 # information in a variable so we can use it in if_changed and friends.
1606 .PHONY: $(PHONY)