Documentation/devicetree/bindings/clock/imx6sll-clock.txt

   1 * Clock bindings for Freescale i.MX6 SLL
   2
   3 Required properties:
   4 - compatible: Should be "fsl,imx6sll-ccm"
   5 - reg: Address and length of the register set
   6 - #clock-cells: Should be <1>
   7 - clocks: list of clock specifiers, must contain an entry for each required
   8   entry in clock-names
   9 - clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
  10
  11 The clock consumer should specify the desired clock by having the clock
  12 ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sll-clock.h
  13 for the full list of i.MX6 SLL clock IDs.
  14
  15 Examples:
  16
  17 #include <dt-bindings/clock/imx6sll-clock.h>
  18
  19 clks: clock-controller@20c4000 {
  20                 compatible = "fsl,imx6sll-ccm";
  21                 reg = <0x020c4000 0x4000>;
  22                 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
  23                              <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
  24                 #clock-cells = <1>;
  25                 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
  26                 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
  27 };
  28
  29 uart1: serial@2020000 {
  30                 compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
  31                 reg = <0x02020000 0x4000>;
  32                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
  33                 clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
  34                          <&clks IMX6SLL_CLK_UART1_SERIAL>;
  35                 clock-names = "ipg", "per";
  36 };