1 * Mediatek UART APDMA Controller
4 - compatible should contain:
5 * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
6 * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
8 - reg: The base address of the APDMA register bank.
10 - interrupts: A single interrupt specifier.
11 One interrupt per dma-requests, or 8 if no dma-requests property is present
13 - dma-requests: The number of DMA channels
15 - clocks : Must contain an entry for each entry in clock-names.
16 See ../clocks/clock-bindings.txt for details.
17 - clock-names: The APDMA clock for register accesses
19 - mediatek,dma-33bits: Present if the DMA requires support
23 apdma: dma-controller@11000400 {
24 compatible = "mediatek,mt2712-uart-dma";
25 reg = <0 0x11000400 0 0x80>,
26 <0 0x11000480 0 0x80>,
27 <0 0x11000500 0 0x80>,
28 <0 0x11000580 0 0x80>,
29 <0 0x11000600 0 0x80>,
30 <0 0x11000680 0 0x80>,
31 <0 0x11000700 0 0x80>,
32 <0 0x11000780 0 0x80>,
33 <0 0x11000800 0 0x80>,
34 <0 0x11000880 0 0x80>,
35 <0 0x11000900 0 0x80>,
36 <0 0x11000980 0 0x80>;
37 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
38 <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
39 <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
40 <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
41 <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
42 <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
43 <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
44 <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
45 <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
46 <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
47 <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
48 <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
50 clocks = <&pericfg CLK_PERI_AP_DMA>;
51 clock-names = "apdma";