Documentation/devicetree/bindings/input/elants_i2c.txt

   1 Elantech I2C Touchscreen
   2
   3 Required properties:
   4 - compatible: must be "elan,ekth3500".
   5 - reg: I2C address of the chip.
   6 - interrupts: interrupt to which the chip is connected (see interrupt
   7   binding[0]).
   8
   9 Optional properties:
  10 - wakeup-source: touchscreen can be used as a wakeup source.
  11 - pinctrl-names: should be "default" (see pinctrl binding [1]).
  12 - pinctrl-0: a phandle pointing to the pin settings for the device (see
  13   pinctrl binding [1]).
  14 - reset-gpios: reset gpio the chip is connected to.
  15 - vcc33-supply: a phandle for the regulator supplying 3.3V power.
  16 - vccio-supply: a phandle for the regulator supplying IO power.
  17
  18 [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
  19 [1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
  20
  21 Example:
  22         &i2c1 {
  23                 /* ... */
  24
  25                 touchscreen@10 {
  26                         compatible = "elan,ekth3500";
  27                         reg = <0x10>;
  28                         interrupt-parent = <&gpio4>;
  29                         interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
  30                         wakeup-source;
  31                 };
  32
  33                 /* ... */
  34         };