Documentation/devicetree/bindings/spi/st,stm32-spi.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/spi/st,stm32-spi.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: STMicroelectronics STM32 SPI Controller bindings
   8
   9 description: |
  10   The STM32 SPI controller is used to communicate with external devices using
  11   the Serial Peripheral Interface. It supports full-duplex, half-duplex and
  12   simplex synchronous serial communication with external devices. It supports
  13   from 4 to 32-bit data size.
  14
  15 maintainers:
  16   - Erwan Leray <erwan.leray@st.com>
  17   - Fabrice Gasnier <fabrice.gasnier@st.com>
  18
  19 allOf:
  20   - $ref: "spi-controller.yaml#"
  21   - if:
  22       properties:
  23         compatible:
  24           contains:
  25             const: st,stm32f4-spi
  26
  27     then:
  28       properties:
  29         st,spi-midi-ns: false
  30
  31 properties:
  32   compatible:
  33     enum:
  34       - st,stm32f4-spi
  35       - st,stm32h7-spi
  36
  37   reg:
  38     maxItems: 1
  39
  40   clocks:
  41     maxItems: 1
  42
  43   interrupts:
  44     maxItems: 1
  45
  46   resets:
  47     maxItems: 1
  48
  49   dmas:
  50     description: |
  51       DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
  52       the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt.
  53     items:
  54       - description: rx DMA channel
  55       - description: tx DMA channel
  56
  57   dma-names:
  58     items:
  59       - const: rx
  60       - const: tx
  61
  62 patternProperties:
  63   "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
  64     type: object
  65     # SPI slave nodes must be children of the SPI master node and can
  66     # contain the following properties.
  67     properties:
  68       st,spi-midi-ns:
  69         description: |
  70           Only for STM32H7, (Master Inter-Data Idleness) minimum time
  71           delay in nanoseconds inserted between two consecutive data frames.
  72
  73 required:
  74   - compatible
  75   - reg
  76   - clocks
  77   - interrupts
  78
  79 examples:
  80   - |
  81     #include <dt-bindings/interrupt-controller/arm-gic.h>
  82     #include <dt-bindings/clock/stm32mp1-clks.h>
  83     #include <dt-bindings/reset/stm32mp1-resets.h>
  84     spi@4000b000 {
  85       #address-cells = <1>;
  86       #size-cells = <0>;
  87       compatible = "st,stm32h7-spi";
  88       reg = <0x4000b000 0x400>;
  89       interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
  90       clocks = <&rcc SPI2_K>;
  91       resets = <&rcc SPI2_R>;
  92       dmas = <&dmamux1 0 39 0x400 0x05>,
  93              <&dmamux1 1 40 0x400 0x05>;
  94       dma-names = "rx", "tx";
  95       cs-gpios = <&gpioa 11 0>;
  96
  97       aardvark@0 {
  98         compatible = "totalphase,aardvark";
  99         reg = <0>;
 100         spi-max-frequency = <4000000>;
 101         st,spi-midi-ns = <4000>;
 102       };
 103     };
 104
 105 ...