Documentation/hwmon/ltc3815.rst

   1 Kernel driver ltc3815
   2 =====================
   3
   4 Supported chips:
   5
   6   * Linear Technology LTC3815
   7
   8     Prefix: 'ltc3815'
   9
  10     Addresses scanned: -
  11
  12     Datasheet: http://www.linear.com/product/ltc3815
  13
  14 Author: Guenter Roeck <linux@roeck-us.net>
  15
  16
  17 Description
  18 -----------
  19
  20 LTC3815 is a Monolithic Synchronous DC/DC Step-Down Converter.
  21
  22
  23 Usage Notes
  24 -----------
  25
  26 This driver does not probe for PMBus devices. You will have to instantiate
  27 devices explicitly.
  28
  29 Example: the following commands will load the driver for an LTC3815
  30 at address 0x20 on I2C bus #1::
  31
  32         # modprobe ltc3815
  33         # echo ltc3815 0x20 > /sys/bus/i2c/devices/i2c-1/new_device
  34
  35
  36 Sysfs attributes
  37 ----------------
  38
  39 ======================= =======================================================
  40 in1_label               "vin"
  41 in1_input               Measured input voltage.
  42 in1_alarm               Input voltage alarm.
  43 in1_highest             Highest input voltage.
  44 in1_reset_history       Reset input voltage history.
  45
  46 in2_label               "vout1".
  47 in2_input               Measured output voltage.
  48 in2_alarm               Output voltage alarm.
  49 in2_highest             Highest output voltage.
  50 in2_reset_history       Reset output voltage history.
  51
  52 temp1_input             Measured chip temperature.
  53 temp1_alarm             Temperature alarm.
  54 temp1_highest           Highest measured temperature.
  55 temp1_reset_history     Reset temperature history.
  56
  57 curr1_label             "iin".
  58 curr1_input             Measured input current.
  59 curr1_highest           Highest input current.
  60 curr1_reset_history     Reset input current history.
  61
  62 curr2_label             "iout1".
  63 curr2_input             Measured output current.
  64 curr2_alarm             Output current alarm.
  65 curr2_highest           Highest output current.
  66 curr2_reset_history     Reset output current history.
  67 ======================= =======================================================