treewide: remove redundant IS_ERR() before error code check

[linux/fpc-iii.git] / Documentation / locking / rt-mutex-design.rst

==============================
RT-mutex implementation design
==============================

Copyright (c) 2006 Steven Rostedt

Licensed under the GNU Free Documentation License, Version 1.2


This document tries to describe the design of the rtmutex.c implementation.
It doesn't describe the reasons why rtmutex.c exists. For that please see
Documentation/locking/rt-mutex.rst.  Although this document does explain problems
that happen without this code, but that is in the concept to understand
what the code actually is doing.

The goal of this document is to help others understand the priority
inheritance (PI) algorithm that is used, as well as reasons for the
decisions that were made to implement PI in the manner that was done.


Unbounded Priority Inversion
----------------------------

Priority inversion is when a lower priority process executes while a higher
priority process wants to run.  This happens for several reasons, and
most of the time it can't be helped.  Anytime a high priority process wants
to use a resource that a lower priority process has (a mutex for example),
the high priority process must wait until the lower priority process is done
with the resource.  This is a priority inversion.  What we want to prevent
is something called unbounded priority inversion.  That is when the high
priority process is prevented from running by a lower priority process for
an undetermined amount of time.

The classic example of unbounded priority inversion is where you have three
processes, let's call them processes A, B, and C, where A is the highest
priority process, C is the lowest, and B is in between. A tries to grab a lock
that C owns and must wait and lets C run to release the lock. But in the
meantime, B executes, and since B is of a higher priority than C, it preempts C,
but by doing so, it is in fact preempting A which is a higher priority process.
Now there's no way of knowing how long A will be sleeping waiting for C
to release the lock, because for all we know, B is a CPU hog and will
never give C a chance to release the lock.  This is called unbounded priority
inversion.

Here's a little ASCII art to show the problem::

     grab lock L1 (owned by C)
       |
  A ---+
          C preempted by B
            |
  C    +----+

  B         +-------->
                  B now keeps A from running.


Priority Inheritance (PI)
-------------------------

There are several ways to solve this issue, but other ways are out of scope
for this document.  Here we only discuss PI.

PI is where a process inherits the priority of another process if the other
process blocks on a lock owned by the current process.  To make this easier
to understand, let's use the previous example, with processes A, B, and C again.

This time, when A blocks on the lock owned by C, C would inherit the priority
of A.  So now if B becomes runnable, it would not preempt C, since C now has
the high priority of A.  As soon as C releases the lock, it loses its
inherited priority, and A then can continue with the resource that C had.

Terminology
-----------

Here I explain some terminology that is used in this document to help describe
the design that is used to implement PI.

PI chain
         - The PI chain is an ordered series of locks and processes that cause
           processes to inherit priorities from a previous process that is
           blocked on one of its locks.  This is described in more detail
           later in this document.

mutex
         - In this document, to differentiate from locks that implement
           PI and spin locks that are used in the PI code, from now on
           the PI locks will be called a mutex.

lock
         - In this document from now on, I will use the term lock when
           referring to spin locks that are used to protect parts of the PI
           algorithm.  These locks disable preemption for UP (when
           CONFIG_PREEMPT is enabled) and on SMP prevents multiple CPUs from
           entering critical sections simultaneously.

spin lock
         - Same as lock above.

waiter
         - A waiter is a struct that is stored on the stack of a blocked
           process.  Since the scope of the waiter is within the code for
           a process being blocked on the mutex, it is fine to allocate
           the waiter on the process's stack (local variable).  This
           structure holds a pointer to the task, as well as the mutex that
           the task is blocked on.  It also has rbtree node structures to
           place the task in the waiters rbtree of a mutex as well as the
           pi_waiters rbtree of a mutex owner task (described below).

           waiter is sometimes used in reference to the task that is waiting
           on a mutex. This is the same as waiter->task.

waiters
         - A list of processes that are blocked on a mutex.

top waiter
         - The highest priority process waiting on a specific mutex.

top pi waiter
              - The highest priority process waiting on one of the mutexes
                that a specific process owns.

Note:
       task and process are used interchangeably in this document, mostly to
       differentiate between two processes that are being described together.


PI chain
--------

The PI chain is a list of processes and mutexes that may cause priority
inheritance to take place.  Multiple chains may converge, but a chain
would never diverge, since a process can't be blocked on more than one
mutex at a time.

Example::

   Process:  A, B, C, D, E
   Mutexes:  L1, L2, L3, L4

   A owns: L1
           B blocked on L1
           B owns L2
                  C blocked on L2
                  C owns L3
                         D blocked on L3
                         D owns L4
                                E blocked on L4

The chain would be::

   E->L4->D->L3->C->L2->B->L1->A

To show where two chains merge, we could add another process F and
another mutex L5 where B owns L5 and F is blocked on mutex L5.

The chain for F would be::

   F->L5->B->L1->A

Since a process may own more than one mutex, but never be blocked on more than
one, the chains merge.

Here we show both chains::

   E->L4->D->L3->C->L2-+
                       |
                       +->B->L1->A
                       |
                 F->L5-+

For PI to work, the processes at the right end of these chains (or we may
also call it the Top of the chain) must be equal to or higher in priority
than the processes to the left or below in the chain.

Also since a mutex may have more than one process blocked on it, we can
have multiple chains merge at mutexes.  If we add another process G that is
blocked on mutex L2::

  G->L2->B->L1->A

And once again, to show how this can grow I will show the merging chains
again::

   E->L4->D->L3->C-+
                   +->L2-+
                   |     |
                 G-+     +->B->L1->A
                         |
                   F->L5-+

If process G has the highest priority in the chain, then all the tasks up
the chain (A and B in this example), must have their priorities increased
to that of G.

Mutex Waiters Tree
------------------

Every mutex keeps track of all the waiters that are blocked on itself. The
mutex has a rbtree to store these waiters by priority.  This tree is protected
by a spin lock that is located in the struct of the mutex. This lock is called
wait_lock.


Task PI Tree
------------

To keep track of the PI chains, each process has its own PI rbtree.  This is
a tree of all top waiters of the mutexes that are owned by the process.
Note that this tree only holds the top waiters and not all waiters that are
blocked on mutexes owned by the process.

The top of the task's PI tree is always the highest priority task that
is waiting on a mutex that is owned by the task.  So if the task has
inherited a priority, it will always be the priority of the task that is
at the top of this tree.

This tree is stored in the task structure of a process as a rbtree called
pi_waiters.  It is protected by a spin lock also in the task structure,
called pi_lock.  This lock may also be taken in interrupt context, so when
locking the pi_lock, interrupts must be disabled.


Depth of the PI Chain
---------------------

The maximum depth of the PI chain is not dynamic, and could actually be
defined.  But is very complex to figure it out, since it depends on all
the nesting of mutexes.  Let's look at the example where we have 3 mutexes,
L1, L2, and L3, and four separate functions func1, func2, func3 and func4.
The following shows a locking order of L1->L2->L3, but may not actually
be directly nested that way::

  void func1(void)
  {
        mutex_lock(L1);

        /* do anything */

        mutex_unlock(L1);
  }

  void func2(void)
  {
        mutex_lock(L1);
        mutex_lock(L2);

        /* do something */

        mutex_unlock(L2);
        mutex_unlock(L1);
  }

  void func3(void)
  {
        mutex_lock(L2);
        mutex_lock(L3);

        /* do something else */

        mutex_unlock(L3);
        mutex_unlock(L2);
  }

  void func4(void)
  {
        mutex_lock(L3);

        /* do something again */

        mutex_unlock(L3);
  }

Now we add 4 processes that run each of these functions separately.
Processes A, B, C, and D which run functions func1, func2, func3 and func4
respectively, and such that D runs first and A last.  With D being preempted
in func4 in the "do something again" area, we have a locking that follows::

  D owns L3
         C blocked on L3
         C owns L2
                B blocked on L2
                B owns L1
                       A blocked on L1

  And thus we have the chain A->L1->B->L2->C->L3->D.

This gives us a PI depth of 4 (four processes), but looking at any of the
functions individually, it seems as though they only have at most a locking
depth of two.  So, although the locking depth is defined at compile time,
it still is very difficult to find the possibilities of that depth.

Now since mutexes can be defined by user-land applications, we don't want a DOS
type of application that nests large amounts of mutexes to create a large
PI chain, and have the code holding spin locks while looking at a large
amount of data.  So to prevent this, the implementation not only implements
a maximum lock depth, but also only holds at most two different locks at a
time, as it walks the PI chain.  More about this below.


Mutex owner and flags
---------------------

The mutex structure contains a pointer to the owner of the mutex.  If the
mutex is not owned, this owner is set to NULL.  Since all architectures
have the task structure on at least a two byte alignment (and if this is
not true, the rtmutex.c code will be broken!), this allows for the least
significant bit to be used as a flag.  Bit 0 is used as the "Has Waiters"
flag. It's set whenever there are waiters on a mutex.

See Documentation/locking/rt-mutex.rst for further details.

cmpxchg Tricks
--------------

Some architectures implement an atomic cmpxchg (Compare and Exchange).  This
is used (when applicable) to keep the fast path of grabbing and releasing
mutexes short.

cmpxchg is basically the following function performed atomically::

  unsigned long _cmpxchg(unsigned long *A, unsigned long *B, unsigned long *C)
  {
        unsigned long T = *A;
        if (*A == *B) {
                *A = *C;
        }
        return T;
  }
  #define cmpxchg(a,b,c) _cmpxchg(&a,&b,&c)

This is really nice to have, since it allows you to only update a variable
if the variable is what you expect it to be.  You know if it succeeded if
the return value (the old value of A) is equal to B.

The macro rt_mutex_cmpxchg is used to try to lock and unlock mutexes. If
the architecture does not support CMPXCHG, then this macro is simply set
to fail every time.  But if CMPXCHG is supported, then this will
help out extremely to keep the fast path short.

The use of rt_mutex_cmpxchg with the flags in the owner field help optimize
the system for architectures that support it.  This will also be explained
later in this document.


Priority adjustments
--------------------

The implementation of the PI code in rtmutex.c has several places that a
process must adjust its priority.  With the help of the pi_waiters of a
process this is rather easy to know what needs to be adjusted.

The functions implementing the task adjustments are rt_mutex_adjust_prio
and rt_mutex_setprio. rt_mutex_setprio is only used in rt_mutex_adjust_prio.

rt_mutex_adjust_prio examines the priority of the task, and the highest
priority process that is waiting any of mutexes owned by the task. Since
the pi_waiters of a task holds an order by priority of all the top waiters
of all the mutexes that the task owns, we simply need to compare the top
pi waiter to its own normal/deadline priority and take the higher one.
Then rt_mutex_setprio is called to adjust the priority of the task to the
new priority. Note that rt_mutex_setprio is defined in kernel/sched/core.c
to implement the actual change in priority.

Note:
        For the "prio" field in task_struct, the lower the number, the
        higher the priority. A "prio" of 5 is of higher priority than a
        "prio" of 10.

It is interesting to note that rt_mutex_adjust_prio can either increase
or decrease the priority of the task.  In the case that a higher priority
process has just blocked on a mutex owned by the task, rt_mutex_adjust_prio
would increase/boost the task's priority.  But if a higher priority task
were for some reason to leave the mutex (timeout or signal), this same function
would decrease/unboost the priority of the task.  That is because the pi_waiters
always contains the highest priority task that is waiting on a mutex owned
by the task, so we only need to compare the priority of that top pi waiter
to the normal priority of the given task.


High level overview of the PI chain walk
----------------------------------------

The PI chain walk is implemented by the function rt_mutex_adjust_prio_chain.

The implementation has gone through several iterations, and has ended up
with what we believe is the best.  It walks the PI chain by only grabbing
at most two locks at a time, and is very efficient.

The rt_mutex_adjust_prio_chain can be used either to boost or lower process
priorities.

rt_mutex_adjust_prio_chain is called with a task to be checked for PI
(de)boosting (the owner of a mutex that a process is blocking on), a flag to
check for deadlocking, the mutex that the task owns, a pointer to a waiter
that is the process's waiter struct that is blocked on the mutex (although this
parameter may be NULL for deboosting), a pointer to the mutex on which the task
is blocked, and a top_task as the top waiter of the mutex.

For this explanation, I will not mention deadlock detection. This explanation
will try to stay at a high level.

When this function is called, there are no locks held.  That also means
that the state of the owner and lock can change when entered into this function.

Before this function is called, the task has already had rt_mutex_adjust_prio
performed on it.  This means that the task is set to the priority that it
should be at, but the rbtree nodes of the task's waiter have not been updated
with the new priorities, and this task may not be in the proper locations
in the pi_waiters and waiters trees that the task is blocked on. This function
solves all that.

The main operation of this function is summarized by Thomas Gleixner in
rtmutex.c. See the 'Chain walk basics and protection scope' comment for further
details.

Taking of a mutex (The walk through)
------------------------------------

OK, now let's take a look at the detailed walk through of what happens when
taking a mutex.

The first thing that is tried is the fast taking of the mutex.  This is
done when we have CMPXCHG enabled (otherwise the fast taking automatically
fails).  Only when the owner field of the mutex is NULL can the lock be
taken with the CMPXCHG and nothing else needs to be done.

If there is contention on the lock, we go about the slow path
(rt_mutex_slowlock).

The slow path function is where the task's waiter structure is created on
the stack.  This is because the waiter structure is only needed for the
scope of this function.  The waiter structure holds the nodes to store
the task on the waiters tree of the mutex, and if need be, the pi_waiters
tree of the owner.

The wait_lock of the mutex is taken since the slow path of unlocking the
mutex also takes this lock.

We then call try_to_take_rt_mutex.  This is where the architecture that
does not implement CMPXCHG would always grab the lock (if there's no
contention).

try_to_take_rt_mutex is used every time the task tries to grab a mutex in the
slow path.  The first thing that is done here is an atomic setting of
the "Has Waiters" flag of the mutex's owner field. By setting this flag
now, the current owner of the mutex being contended for can't release the mutex
without going into the slow unlock path, and it would then need to grab the
wait_lock, which this code currently holds. So setting the "Has Waiters" flag
forces the current owner to synchronize with this code.

The lock is taken if the following are true:

   1) The lock has no owner
   2) The current task is the highest priority against all other
      waiters of the lock

If the task succeeds to acquire the lock, then the task is set as the
owner of the lock, and if the lock still has waiters, the top_waiter
(highest priority task waiting on the lock) is added to this task's
pi_waiters tree.

If the lock is not taken by try_to_take_rt_mutex(), then the
task_blocks_on_rt_mutex() function is called. This will add the task to
the lock's waiter tree and propagate the pi chain of the lock as well
as the lock's owner's pi_waiters tree. This is described in the next
section.

Task blocks on mutex
--------------------

The accounting of a mutex and process is done with the waiter structure of
the process.  The "task" field is set to the process, and the "lock" field
to the mutex.  The rbtree node of waiter are initialized to the processes
current priority.

Since the wait_lock was taken at the entry of the slow lock, we can safely
add the waiter to the task waiter tree.  If the current process is the
highest priority process currently waiting on this mutex, then we remove the
previous top waiter process (if it exists) from the pi_waiters of the owner,
and add the current process to that tree.  Since the pi_waiter of the owner
has changed, we call rt_mutex_adjust_prio on the owner to see if the owner
should adjust its priority accordingly.

If the owner is also blocked on a lock, and had its pi_waiters changed
(or deadlock checking is on), we unlock the wait_lock of the mutex and go ahead
and run rt_mutex_adjust_prio_chain on the owner, as described earlier.

Now all locks are released, and if the current process is still blocked on a
mutex (waiter "task" field is not NULL), then we go to sleep (call schedule).

Waking up in the loop
---------------------

The task can then wake up for a couple of reasons:
  1) The previous lock owner released the lock, and the task now is top_waiter
  2) we received a signal or timeout

In both cases, the task will try again to acquire the lock. If it
does, then it will take itself off the waiters tree and set itself back
to the TASK_RUNNING state.

In first case, if the lock was acquired by another task before this task
could get the lock, then it will go back to sleep and wait to be woken again.

The second case is only applicable for tasks that are grabbing a mutex
that can wake up before getting the lock, either due to a signal or
a timeout (i.e. rt_mutex_timed_futex_lock()). When woken, it will try to
take the lock again, if it succeeds, then the task will return with the
lock held, otherwise it will return with -EINTR if the task was woken
by a signal, or -ETIMEDOUT if it timed out.


Unlocking the Mutex
-------------------

The unlocking of a mutex also has a fast path for those architectures with
CMPXCHG.  Since the taking of a mutex on contention always sets the
"Has Waiters" flag of the mutex's owner, we use this to know if we need to
take the slow path when unlocking the mutex.  If the mutex doesn't have any
waiters, the owner field of the mutex would equal the current process and
the mutex can be unlocked by just replacing the owner field with NULL.

If the owner field has the "Has Waiters" bit set (or CMPXCHG is not available),
the slow unlock path is taken.

The first thing done in the slow unlock path is to take the wait_lock of the
mutex.  This synchronizes the locking and unlocking of the mutex.

A check is made to see if the mutex has waiters or not.  On architectures that
do not have CMPXCHG, this is the location that the owner of the mutex will
determine if a waiter needs to be awoken or not.  On architectures that
do have CMPXCHG, that check is done in the fast path, but it is still needed
in the slow path too.  If a waiter of a mutex woke up because of a signal
or timeout between the time the owner failed the fast path CMPXCHG check and
the grabbing of the wait_lock, the mutex may not have any waiters, thus the
owner still needs to make this check. If there are no waiters then the mutex
owner field is set to NULL, the wait_lock is released and nothing more is
needed.

If there are waiters, then we need to wake one up.

On the wake up code, the pi_lock of the current owner is taken.  The top
waiter of the lock is found and removed from the waiters tree of the mutex
as well as the pi_waiters tree of the current owner. The "Has Waiters" bit is
marked to prevent lower priority tasks from stealing the lock.

Finally we unlock the pi_lock of the pending owner and wake it up.


Contact
-------

For updates on this document, please email Steven Rostedt <rostedt@goodmis.org>


Credits
-------

Author:  Steven Rostedt <rostedt@goodmis.org>

Updated: Alex Shi <alex.shi@linaro.org> - 7/6/2017

Original Reviewers:
                     Ingo Molnar, Thomas Gleixner, Thomas Duetsch, and
                     Randy Dunlap

Update (7/6/2017) Reviewers: Steven Rostedt and Sebastian Siewior

Updates
-------

This document was originally written for 2.6.17-rc3-mm1
was updated on 4.12