arch/arm/boot/dts/am335x-netcom-plus-2xx.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   4  */
   5
   6 /*
   7  * VScom OnRISC
   8  * http://www.vscom.de
   9  */
  10
  11 /dts-v1/;
  12
  13 #include "am335x-baltos.dtsi"
  14 #include "am335x-baltos-leds.dtsi"
  15
  16 / {
  17         model = "NetCom Plus";
  18 };
  19
  20 &am33xx_pinmux {
  21         uart1_pins: pinmux_uart1_pins {
  22                 pinctrl-single,pins = <
  23                         AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)                      /* RX */
  24                         AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)                      /* TX */
  25                         AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)            /* CTS */
  26                         AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)           /* RTS */
  27                         AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)            /* DTR */
  28                         AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)             /* DSR */
  29                         AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)              /* DCD */
  30                         AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)        /* RI */
  31                 >;
  32         };
  33
  34         uart2_pins: pinmux_uart2_pins {
  35                 pinctrl-single,pins = <
  36                         AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)              /* RX */
  37                         AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)               /* TX */
  38                         AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* CTS */
  39                         AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)     /* RTS */
  40                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)    /* DTR */
  41                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* DSR */
  42                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* DCD */
  43                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* RI */
  44                 >;
  45         };
  46 };
  47
  48 &usb0_phy {
  49         status = "okay";
  50 };
  51
  52 &usb0 {
  53         status = "okay";
  54         dr_mode = "host";
  55 };
  56
  57 &uart1 {
  58         pinctrl-names = "default";
  59         pinctrl-0 = <&uart1_pins>;
  60         dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
  61         dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
  62         dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
  63         rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
  64
  65         status = "okay";
  66 };
  67
  68 &uart2 {
  69         pinctrl-names = "default";
  70         pinctrl-0 = <&uart2_pins>;
  71         dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  72         dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
  73         dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  74         rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  75
  76         status = "okay";
  77 };
  78
  79 &davinci_mdio {
  80         phy0: ethernet-phy@0 {
  81                 reg = <1>;
  82         };
  83 };
  84
  85 &cpsw_emac0 {
  86         phy-mode = "rmii";
  87         dual_emac_res_vlan = <1>;
  88         phy-handle = <&phy0>;
  89 };
  90
  91 &cpsw_emac1 {
  92         phy-mode = "rgmii-id";
  93         dual_emac_res_vlan = <2>;
  94         phy-handle = <&phy1>;
  95 };