arch/arm/boot/dts/at91sam9g25ek.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
   4  *
   5  *  Copyright (C) 2012 Atmel,
   6  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
   7  */
   8 /dts-v1/;
   9 #include "at91sam9g25.dtsi"
  10 #include "at91sam9x5ek.dtsi"
  11
  12 / {
  13         model = "Atmel AT91SAM9G25-EK";
  14         compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
  15 };
  16
  17 &i2c0 {
  18         camera@30 {
  19                 compatible = "ovti,ov2640";
  20                 reg = <0x30>;
  21                 pinctrl-names = "default";
  22                 pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
  23                 resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
  24                 pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
  25                 clocks = <&pmc PMC_TYPE_SYSTEM 8>;
  26                 clock-names = "xvclk";
  27                 assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
  28                 assigned-clock-rates = <25000000>;
  29                 status = "okay";
  30
  31                 port {
  32                         ov2640_0: endpoint {
  33                                 remote-endpoint = <&isi_0>;
  34                                 bus-width = <8>;
  35                         };
  36                 };
  37         };
  38 };
  39
  40 &isi {
  41         status = "okay";
  42
  43         port {
  44                 isi_0: endpoint@0 {
  45                         reg = <0>;
  46                         remote-endpoint = <&ov2640_0>;
  47                         bus-width = <8>;
  48                         vsync-active = <1>;
  49                         hsync-active = <1>;
  50                 };
  51         };
  52 };
  53
  54 &macb0 {
  55         phy-mode = "rmii";
  56         status = "okay";
  57 };
  58
  59 &mmc1 {
  60         status = "disabled";
  61 };
  62
  63 &spi0 {
  64         status = "disabled";
  65 };