1 // SPDX-License-Identifier: GPL-2.0
3 * Samsung's Exynos4210 based Origen board device tree source
5 * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 * Copyright (c) 2010-2011 Linaro Ltd.
10 * Device tree source file for Insignal's Origen board which is based on
11 * Samsung's Exynos4210 SoC.
15 #include "exynos4210.dtsi"
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/input/input.h>
18 #include "exynos-mfc-reserved-memory.dtsi"
21 model = "Insignal Origen evaluation board based on Exynos4210";
22 compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
25 device_type = "memory";
26 reg = <0x40000000 0x10000000
29 0x70000000 0x10000000>;
33 bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
34 stdout-path = "serial2:115200n8";
37 mmc_reg: voltage-regulator {
38 compatible = "regulator-fixed";
39 regulator-name = "VMEM_VDD_2.8V";
40 regulator-min-microvolt = <2800000>;
41 regulator-max-microvolt = <2800000>;
42 gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
47 compatible = "gpio-keys";
51 gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
52 linux,code = <KEY_UP>;
58 gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
59 linux,code = <KEY_DOWN>;
65 gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
66 linux,code = <KEY_BACK>;
72 gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
73 linux,code = <KEY_HOME>;
79 gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
80 linux,code = <KEY_MENU>;
86 compatible = "gpio-leds";
88 gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
89 linux,default-trigger = "heartbeat";
95 compatible = "samsung,clock-xxti";
96 clock-frequency = <0>;
100 compatible = "samsung,clock-xusbxti";
101 clock-frequency = <24000000>;
106 native-mode = <&timing0>;
108 clock-frequency = <47500000>;
122 cpu0-supply = <&buck1_reg>;
130 pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
131 pinctrl-names = "default";
136 mali-supply = <&buck3_reg>;
141 vusb_d-supply = <&ldo3_reg>;
142 vusb_a-supply = <&ldo8_reg>;
143 dr_mode = "peripheral";
149 samsung,i2c-sda-delay = <100>;
150 samsung,i2c-max-bus-freq = <20000>;
151 pinctrl-0 = <&i2c0_bus>;
152 pinctrl-names = "default";
155 compatible = "maxim,max8997-pmic";
157 interrupt-parent = <&gpx0>;
158 interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
159 pinctrl-names = "default";
160 pinctrl-0 = <&max8997_irq>;
162 max8997,pmic-buck1-dvs-voltage = <1350000>;
163 max8997,pmic-buck2-dvs-voltage = <1100000>;
164 max8997,pmic-buck5-dvs-voltage = <1200000>;
168 regulator-name = "VDD_ABB_3.3V";
169 regulator-min-microvolt = <3300000>;
170 regulator-max-microvolt = <3300000>;
174 regulator-name = "VDD_ALIVE_1.1V";
175 regulator-min-microvolt = <1100000>;
176 regulator-max-microvolt = <1100000>;
181 regulator-name = "VMIPI_1.1V";
182 regulator-min-microvolt = <1100000>;
183 regulator-max-microvolt = <1100000>;
187 regulator-name = "VDD_RTC_1.8V";
188 regulator-min-microvolt = <1800000>;
189 regulator-max-microvolt = <1800000>;
194 regulator-name = "VMIPI_1.8V";
195 regulator-min-microvolt = <1800000>;
196 regulator-max-microvolt = <1800000>;
201 regulator-name = "VDD_AUD_1.8V";
202 regulator-min-microvolt = <1800000>;
203 regulator-max-microvolt = <1800000>;
207 regulator-name = "VADC_3.3V";
208 regulator-min-microvolt = <3300000>;
209 regulator-max-microvolt = <3300000>;
213 regulator-name = "DVDD_SWB_2.8V";
214 regulator-min-microvolt = <2800000>;
215 regulator-max-microvolt = <2800000>;
220 regulator-name = "VDD_PLL_1.1V";
221 regulator-min-microvolt = <1100000>;
222 regulator-max-microvolt = <1100000>;
227 regulator-name = "VDD_AUD_3V";
228 regulator-min-microvolt = <3000000>;
229 regulator-max-microvolt = <3000000>;
233 regulator-name = "AVDD18_SWB_1.8V";
234 regulator-min-microvolt = <1800000>;
235 regulator-max-microvolt = <1800000>;
240 regulator-name = "VDD_SWB_3.3V";
241 regulator-min-microvolt = <3300000>;
242 regulator-max-microvolt = <3300000>;
247 regulator-name = "VDD_MIF_1.2V";
248 regulator-min-microvolt = <1200000>;
249 regulator-max-microvolt = <1200000>;
255 * HACK: The real name is VDD_ARM_1.2V,
256 * but exynos-cpufreq does not support
257 * DT-based regulator lookup yet.
259 regulator-name = "vdd_arm";
260 regulator-min-microvolt = <950000>;
261 regulator-max-microvolt = <1350000>;
267 regulator-name = "VDD_INT_1.1V";
268 regulator-min-microvolt = <900000>;
269 regulator-max-microvolt = <1100000>;
275 regulator-name = "VDD_G3D_1.1V";
276 regulator-min-microvolt = <900000>;
277 regulator-max-microvolt = <1100000>;
281 regulator-name = "VDDQ_M1M2_1.2V";
282 regulator-min-microvolt = <1200000>;
283 regulator-max-microvolt = <1200000>;
288 regulator-name = "VDD_LCD_3.3V";
289 regulator-min-microvolt = <3300000>;
290 regulator-max-microvolt = <3300000>;
299 max8997_irq: max8997-irq {
300 samsung,pins = "gpx0-3", "gpx0-4";
301 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
307 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
308 pinctrl-names = "default";
309 vmmc-supply = <&mmc_reg>;
315 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
316 pinctrl-names = "default";
317 vmmc-supply = <&mmc_reg>;