arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2013 Data Modul AG
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include "imx6q.dtsi"
  10
  11 / {
  12         model = "Data Modul eDM-QMX6 Board";
  13         compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
  14
  15         chosen {
  16                 stdout-path = &uart2;
  17         };
  18
  19         aliases {
  20                 gpio7 = &stmpe_gpio1;
  21                 gpio8 = &stmpe_gpio2;
  22                 stmpe-i2c0 = &stmpe1;
  23                 stmpe-i2c1 = &stmpe2;
  24         };
  25
  26         memory@10000000 {
  27                 device_type = "memory";
  28                 reg = <0x10000000 0x80000000>;
  29         };
  30
  31         regulators {
  32                 compatible = "simple-bus";
  33                 #address-cells = <1>;
  34                 #size-cells = <0>;
  35
  36                 reg_3p3v: regulator@0 {
  37                         compatible = "regulator-fixed";
  38                         reg = <0>;
  39                         regulator-name = "3P3V";
  40                         regulator-min-microvolt = <3300000>;
  41                         regulator-max-microvolt = <3300000>;
  42                         regulator-always-on;
  43                 };
  44
  45                 reg_usb_otg_switch: regulator@1 {
  46                         compatible = "regulator-fixed";
  47                         reg = <1>;
  48                         regulator-name = "usb_otg_switch";
  49                         regulator-min-microvolt = <5000000>;
  50                         regulator-max-microvolt = <5000000>;
  51                         gpio = <&gpio7 12 0>;
  52                         regulator-boot-on;
  53                         regulator-always-on;
  54                 };
  55
  56                 reg_usb_host1: regulator@2 {
  57                         compatible = "regulator-fixed";
  58                         reg = <2>;
  59                         regulator-name = "usb_host1_en";
  60                         regulator-min-microvolt = <3300000>;
  61                         regulator-max-microvolt = <3300000>;
  62                         gpio = <&gpio3 31 0>;
  63                         enable-active-high;
  64                 };
  65         };
  66
  67         gpio-leds {
  68                 compatible = "gpio-leds";
  69
  70                 led-blue {
  71                         label = "blue";
  72                         gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
  73                         linux,default-trigger = "heartbeat";
  74                 };
  75
  76                 led-green {
  77                         label = "green";
  78                         gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
  79                 };
  80
  81                 led-pink {
  82                         label = "pink";
  83                         gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
  84                 };
  85
  86                 led-red {
  87                         label = "red";
  88                         gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
  89                 };
  90         };
  91 };
  92
  93 &can1 {
  94         pinctrl-names = "default";
  95         pinctrl-0 = <&pinctrl_can1>;
  96         status = "okay";
  97 };
  98
  99 &ecspi5 {
 100         pinctrl-names = "default";
 101         pinctrl-0 = <&pinctrl_ecspi5>;
 102         cs-gpios = <&gpio1 12 0>;
 103         status = "okay";
 104
 105         flash: m25p80@0 {
 106                 compatible = "m25p80", "jedec,spi-nor";
 107                 spi-max-frequency = <40000000>;
 108                 reg = <0>;
 109         };
 110 };
 111
 112 &fec {
 113         pinctrl-names = "default";
 114         pinctrl-0 = <&pinctrl_enet>;
 115         phy-mode = "rgmii";
 116         phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 117         phy-supply = <&vgen2_1v2_eth>;
 118         status = "okay";
 119 };
 120
 121 &i2c1 {
 122         clock-frequency = <100000>;
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&pinctrl_i2c1>;
 125         status = "okay";
 126 };
 127
 128 &i2c2 {
 129         clock-frequency = <100000>;
 130         pinctrl-names = "default";
 131         pinctrl-0 = <&pinctrl_i2c2
 132                      &pinctrl_stmpe1
 133                      &pinctrl_stmpe2
 134                      &pinctrl_pfuze>;
 135         status = "okay";
 136
 137         pmic: pfuze100@8 {
 138                 compatible = "fsl,pfuze100";
 139                 reg = <0x08>;
 140                 interrupt-parent = <&gpio3>;
 141                 interrupts = <20 8>;
 142
 143                 regulators {
 144                         sw1a_reg: sw1ab {
 145                                 regulator-min-microvolt = <300000>;
 146                                 regulator-max-microvolt = <1875000>;
 147                                 regulator-boot-on;
 148                                 regulator-always-on;
 149                         };
 150
 151                         sw1c_reg: sw1c {
 152                                 regulator-min-microvolt = <300000>;
 153                                 regulator-max-microvolt = <1875000>;
 154                                 regulator-boot-on;
 155                                 regulator-always-on;
 156                         };
 157
 158                         sw2_reg: sw2 {
 159                                 regulator-min-microvolt = <800000>;
 160                                 regulator-max-microvolt = <3300000>;
 161                                 regulator-boot-on;
 162                                 regulator-always-on;
 163                         };
 164
 165                         sw3a_reg: sw3a {
 166                                 regulator-min-microvolt = <400000>;
 167                                 regulator-max-microvolt = <1975000>;
 168                                 regulator-boot-on;
 169                                 regulator-always-on;
 170                         };
 171
 172                         sw3b_reg: sw3b {
 173                                 regulator-min-microvolt = <400000>;
 174                                 regulator-max-microvolt = <1975000>;
 175                                 regulator-boot-on;
 176                                 regulator-always-on;
 177                         };
 178
 179                         sw4_reg: sw4 {
 180                                 regulator-min-microvolt = <400000>;
 181                                 regulator-max-microvolt = <1975000>;
 182                                 regulator-always-on;
 183                         };
 184
 185                         swbst_reg: swbst {
 186                                 regulator-min-microvolt = <5000000>;
 187                                 regulator-max-microvolt = <5150000>;
 188                                 regulator-always-on;
 189                         };
 190
 191                         snvs_reg: vsnvs {
 192                                 regulator-min-microvolt = <1000000>;
 193                                 regulator-max-microvolt = <3000000>;
 194                                 regulator-boot-on;
 195                                 regulator-always-on;
 196                         };
 197
 198                         vref_reg: vrefddr {
 199                                 regulator-boot-on;
 200                                 regulator-always-on;
 201                         };
 202
 203                         vgen1_reg: vgen1 {
 204                                 regulator-min-microvolt = <800000>;
 205                                 regulator-max-microvolt = <1550000>;
 206                         };
 207
 208                         vgen2_1v2_eth: vgen2 {
 209                                 regulator-min-microvolt = <800000>;
 210                                 regulator-max-microvolt = <1550000>;
 211                         };
 212
 213                         vdd_high_in: vgen3 {
 214                                 regulator-min-microvolt = <1800000>;
 215                                 regulator-max-microvolt = <3300000>;
 216                                 regulator-boot-on;
 217                                 regulator-always-on;
 218                         };
 219
 220                         vgen4_reg: vgen4 {
 221                                 regulator-min-microvolt = <1800000>;
 222                                 regulator-max-microvolt = <3300000>;
 223                                 regulator-always-on;
 224                         };
 225
 226                         vgen5_reg: vgen5 {
 227                                 regulator-min-microvolt = <1800000>;
 228                                 regulator-max-microvolt = <3300000>;
 229                                 regulator-always-on;
 230                         };
 231
 232                         vgen6_reg: vgen6 {
 233                                 regulator-min-microvolt = <1800000>;
 234                                 regulator-max-microvolt = <3300000>;
 235                                 regulator-always-on;
 236                         };
 237                 };
 238         };
 239
 240         stmpe1: stmpe1601@40 {
 241                 compatible = "st,stmpe1601";
 242                 reg = <0x40>;
 243                 interrupts = <30 0>;
 244                 interrupt-parent = <&gpio3>;
 245                 vcc-supply = <&sw2_reg>;
 246                 vio-supply = <&sw2_reg>;
 247
 248                 stmpe_gpio1: stmpe_gpio {
 249                         #gpio-cells = <2>;
 250                         compatible = "st,stmpe-gpio";
 251                 };
 252         };
 253
 254         stmpe2: stmpe1601@44 {
 255                 compatible = "st,stmpe1601";
 256                 reg = <0x44>;
 257                 interrupts = <2 0>;
 258                 interrupt-parent = <&gpio5>;
 259                 vcc-supply = <&sw2_reg>;
 260                 vio-supply = <&sw2_reg>;
 261
 262                 stmpe_gpio2: stmpe_gpio {
 263                         #gpio-cells = <2>;
 264                         compatible = "st,stmpe-gpio";
 265                 };
 266         };
 267
 268         temp1: ad7414@4c {
 269                 compatible = "ad,ad7414";
 270                 reg = <0x4c>;
 271         };
 272
 273         temp2: ad7414@4d {
 274                 compatible = "ad,ad7414";
 275                 reg = <0x4d>;
 276         };
 277
 278         rtc: m41t62@68 {
 279                 compatible = "st,m41t62";
 280                 reg = <0x68>;
 281         };
 282 };
 283
 284 &i2c3 {
 285         clock-frequency = <100000>;
 286         pinctrl-names = "default";
 287         pinctrl-0 = <&pinctrl_i2c3>;
 288         status = "okay";
 289 };
 290
 291 &iomuxc {
 292         pinctrl-names = "default";
 293         pinctrl-0 = <&pinctrl_hog>;
 294
 295         imx6q-dmo-edmqmx6 {
 296                 pinctrl_hog: hoggrp {
 297                         fsl,pins = <
 298                                 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
 299                                 MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
 300                         >;
 301                 };
 302
 303                 pinctrl_can1: can1grp {
 304                         fsl,pins = <
 305                                 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b0
 306                                 MX6QDL_PAD_GPIO_7__FLEXCAN1_TX          0x1b0b0
 307                         >;
 308                 };
 309
 310                 pinctrl_ecspi5: ecspi5rp-1 {
 311                         fsl,pins = <
 312                                 MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO        0x80000000
 313                                 MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI         0x80000000
 314                                 MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK         0x80000000
 315                                 MX6QDL_PAD_SD2_DAT3__GPIO1_IO12         0x80000000
 316                         >;
 317                 };
 318
 319                 pinctrl_enet: enetgrp {
 320                         fsl,pins = <
 321                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 322                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 323                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 324                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 325                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 326                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 327                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 328                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 329                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 330                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 331                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 332                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 333                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 334                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 335                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 336                                 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25      0x1b0b0
 337                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 338                         >;
 339                 };
 340
 341                 pinctrl_i2c1: i2c1grp {
 342                         fsl,pins = <
 343                                 MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 344                                 MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 345                         >;
 346                 };
 347
 348                 pinctrl_i2c2: i2c2grp {
 349                         fsl,pins = <
 350                                 MX6QDL_PAD_EIM_EB2__I2C2_SCL            0x4001b8b1
 351                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 352                         >;
 353                 };
 354
 355                 pinctrl_i2c3: i2c3grp {
 356                         fsl,pins = <
 357                                 MX6QDL_PAD_EIM_D17__I2C3_SCL            0x4001b8b1
 358                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 359                         >;
 360                 };
 361
 362                 pinctrl_pcie: pciegrp {
 363                         fsl,pins = <
 364                                 MX6QDL_PAD_KEY_COL1__GPIO4_IO08         0x100b1
 365                         >;
 366                 };
 367
 368                 pinctrl_pfuze: pfuze100grp1 {
 369                         fsl,pins = <
 370                                 MX6QDL_PAD_EIM_D20__GPIO3_IO20          0x80000000
 371                         >;
 372                 };
 373
 374                 pinctrl_stmpe1: stmpe1grp {
 375                         fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
 376                 };
 377
 378                 pinctrl_stmpe2: stmpe2grp {
 379                         fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
 380                 };
 381
 382                 pinctrl_uart1: uart1grp {
 383                         fsl,pins = <
 384                                 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 385                                 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 386                         >;
 387                 };
 388
 389                 pinctrl_uart2: uart2grp {
 390                         fsl,pins = <
 391                                 MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
 392                                 MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
 393                         >;
 394                 };
 395
 396                 pinctrl_usbotg: usbotggrp {
 397                         fsl,pins = <
 398                                 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x17059
 399                         >;
 400                 };
 401
 402                 pinctrl_usdhc3: usdhc3grp {
 403                         fsl,pins = <
 404                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 405                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 406                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 407                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 408                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 409                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 410                         >;
 411                 };
 412
 413                 pinctrl_usdhc4: usdhc4grp {
 414                         fsl,pins = <
 415                                 MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
 416                                 MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
 417                                 MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
 418                                 MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
 419                                 MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
 420                                 MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
 421                                 MX6QDL_PAD_SD4_DAT4__SD4_DATA4          0x17059
 422                                 MX6QDL_PAD_SD4_DAT5__SD4_DATA5          0x17059
 423                                 MX6QDL_PAD_SD4_DAT6__SD4_DATA6          0x17059
 424                                 MX6QDL_PAD_SD4_DAT7__SD4_DATA7          0x17059
 425                         >;
 426                 };
 427         };
 428 };
 429
 430 &pcie {
 431         pinctrl-names = "default";
 432         pinctrl-0 = <&pinctrl_pcie>;
 433         reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
 434         status = "okay";
 435 };
 436
 437 &sata {
 438         status = "okay";
 439 };
 440
 441 &uart1 {
 442         pinctrl-names = "default";
 443         pinctrl-0 = <&pinctrl_uart1>;
 444         status = "okay";
 445 };
 446
 447 &uart2 {
 448         pinctrl-names = "default";
 449         pinctrl-0 = <&pinctrl_uart2>;
 450         status = "okay";
 451 };
 452
 453 &usbh1 {
 454         vbus-supply = <&reg_usb_host1>;
 455         disable-over-current;
 456         dr_mode = "host";
 457         status = "okay";
 458 };
 459
 460 &usbotg {
 461         pinctrl-names = "default";
 462         pinctrl-0 = <&pinctrl_usbotg>;
 463         disable-over-current;
 464         status = "okay";
 465 };
 466
 467 &usdhc3 {
 468         pinctrl-names = "default";
 469         pinctrl-0 = <&pinctrl_usdhc3>;
 470         vmmc-supply = <&reg_3p3v>;
 471         status = "okay";
 472 };
 473
 474 &usdhc4 {
 475         pinctrl-names = "default";
 476         pinctrl-0 = <&pinctrl_usdhc4>;
 477         vmmc-supply = <&reg_3p3v>;
 478         non-removable;
 479         bus-width = <8>;
 480         status = "okay";
 481 };