arch/arm/boot/dts/imx6qdl-gw54xx.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2013 Gateworks Corporation
   4  */
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/sound/fsl-imx-audmux.h>
   8
   9 / {
  10         /* these are used by bootloader for disabling nodes */
  11         aliases {
  12                 led0 = &led0;
  13                 led1 = &led1;
  14                 led2 = &led2;
  15                 nand = &gpmi;
  16                 ssi0 = &ssi1;
  17                 usb0 = &usbh1;
  18                 usb1 = &usbotg;
  19         };
  20
  21         chosen {
  22                 bootargs = "console=ttymxc1,115200";
  23         };
  24
  25         backlight {
  26                 compatible = "pwm-backlight";
  27                 pwms = <&pwm4 0 5000000>;
  28                 brightness-levels = <0 4 8 16 32 64 128 255>;
  29                 default-brightness-level = <7>;
  30         };
  31
  32         leds {
  33                 compatible = "gpio-leds";
  34                 pinctrl-names = "default";
  35                 pinctrl-0 = <&pinctrl_gpio_leds>;
  36
  37                 led0: user1 {
  38                         label = "user1";
  39                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
  40                         default-state = "on";
  41                         linux,default-trigger = "heartbeat";
  42                 };
  43
  44                 led1: user2 {
  45                         label = "user2";
  46                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
  47                         default-state = "off";
  48                 };
  49
  50                 led2: user3 {
  51                         label = "user3";
  52                         gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
  53                         default-state = "off";
  54                 };
  55         };
  56
  57         memory@10000000 {
  58                 device_type = "memory";
  59                 reg = <0x10000000 0x40000000>;
  60         };
  61
  62         pps {
  63                 compatible = "pps-gpio";
  64                 pinctrl-names = "default";
  65                 pinctrl-0 = <&pinctrl_pps>;
  66                 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
  67                 status = "okay";
  68         };
  69
  70         regulators {
  71                 compatible = "simple-bus";
  72                 #address-cells = <1>;
  73                 #size-cells = <0>;
  74
  75                 reg_1p0v: regulator@0 {
  76                         compatible = "regulator-fixed";
  77                         reg = <0>;
  78                         regulator-name = "1P0V";
  79                         regulator-min-microvolt = <1000000>;
  80                         regulator-max-microvolt = <1000000>;
  81                         regulator-always-on;
  82                 };
  83
  84                 reg_3p3v: regulator@1 {
  85                         compatible = "regulator-fixed";
  86                         reg = <1>;
  87                         regulator-name = "3P3V";
  88                         regulator-min-microvolt = <3300000>;
  89                         regulator-max-microvolt = <3300000>;
  90                         regulator-always-on;
  91                 };
  92
  93                 reg_usb_h1_vbus: regulator@2 {
  94                         compatible = "regulator-fixed";
  95                         reg = <2>;
  96                         regulator-name = "usb_h1_vbus";
  97                         regulator-min-microvolt = <5000000>;
  98                         regulator-max-microvolt = <5000000>;
  99                         regulator-always-on;
 100                 };
 101
 102                 reg_usb_otg_vbus: regulator@3 {
 103                         compatible = "regulator-fixed";
 104                         reg = <3>;
 105                         regulator-name = "usb_otg_vbus";
 106                         regulator-min-microvolt = <5000000>;
 107                         regulator-max-microvolt = <5000000>;
 108                         gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 109                         enable-active-high;
 110                 };
 111         };
 112
 113         sound-analog {
 114                 compatible = "fsl,imx6q-ventana-sgtl5000",
 115                              "fsl,imx-audio-sgtl5000";
 116                 model = "sgtl5000-audio";
 117                 ssi-controller = <&ssi1>;
 118                 audio-codec = <&sgtl5000>;
 119                 audio-routing =
 120                         "MIC_IN", "Mic Jack",
 121                         "Mic Jack", "Mic Bias",
 122                         "Headphone Jack", "HP_OUT";
 123                 mux-int-port = <1>;
 124                 mux-ext-port = <4>;
 125         };
 126 };
 127
 128 &audmux {
 129         pinctrl-names = "default";
 130         pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
 131         status = "okay";
 132
 133         ssi2 {
 134                 fsl,audmux-port = <1>;
 135                 fsl,port-config = <
 136                         (IMX_AUDMUX_V2_PTCR_TFSDIR |
 137                         IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
 138                         IMX_AUDMUX_V2_PTCR_TCLKDIR |
 139                         IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
 140                         IMX_AUDMUX_V2_PTCR_SYN)
 141                         IMX_AUDMUX_V2_PDCR_RXDSEL(4)
 142                 >;
 143         };
 144
 145         aud5 {
 146                 fsl,audmux-port = <4>;
 147                 fsl,port-config = <
 148                         IMX_AUDMUX_V2_PTCR_SYN
 149                         IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
 150         };
 151 };
 152
 153 &can1 {
 154         pinctrl-names = "default";
 155         pinctrl-0 = <&pinctrl_flexcan1>;
 156         status = "okay";
 157 };
 158
 159 &clks {
 160         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
 161                           <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
 162         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 163                                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 164 };
 165
 166 &ecspi2 {
 167         cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 168         pinctrl-names = "default";
 169         pinctrl-0 = <&pinctrl_ecspi2>;
 170         status = "okay";
 171 };
 172
 173 &fec {
 174         pinctrl-names = "default";
 175         pinctrl-0 = <&pinctrl_enet>;
 176         phy-mode = "rgmii-id";
 177         phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 178         status = "okay";
 179 };
 180
 181 &gpmi {
 182         pinctrl-names = "default";
 183         pinctrl-0 = <&pinctrl_gpmi_nand>;
 184         status = "okay";
 185 };
 186
 187 &hdmi {
 188         ddc-i2c-bus = <&i2c3>;
 189         status = "okay";
 190 };
 191
 192 &i2c1 {
 193         clock-frequency = <100000>;
 194         pinctrl-names = "default";
 195         pinctrl-0 = <&pinctrl_i2c1>;
 196         status = "okay";
 197
 198         eeprom1: eeprom@50 {
 199                 compatible = "atmel,24c02";
 200                 reg = <0x50>;
 201                 pagesize = <16>;
 202         };
 203
 204         eeprom2: eeprom@51 {
 205                 compatible = "atmel,24c02";
 206                 reg = <0x51>;
 207                 pagesize = <16>;
 208         };
 209
 210         eeprom3: eeprom@52 {
 211                 compatible = "atmel,24c02";
 212                 reg = <0x52>;
 213                 pagesize = <16>;
 214         };
 215
 216         eeprom4: eeprom@53 {
 217                 compatible = "atmel,24c02";
 218                 reg = <0x53>;
 219                 pagesize = <16>;
 220         };
 221
 222         gpio: pca9555@23 {
 223                 compatible = "nxp,pca9555";
 224                 reg = <0x23>;
 225                 gpio-controller;
 226                 #gpio-cells = <2>;
 227         };
 228
 229         rtc: ds1672@68 {
 230                 compatible = "dallas,ds1672";
 231                 reg = <0x68>;
 232         };
 233 };
 234
 235 &i2c2 {
 236         clock-frequency = <100000>;
 237         pinctrl-names = "default";
 238         pinctrl-0 = <&pinctrl_i2c2>;
 239         status = "okay";
 240
 241         pmic: pfuze100@8 {
 242                 compatible = "fsl,pfuze100";
 243                 reg = <0x08>;
 244
 245                 regulators {
 246                         sw1a_reg: sw1ab {
 247                                 regulator-min-microvolt = <300000>;
 248                                 regulator-max-microvolt = <1875000>;
 249                                 regulator-boot-on;
 250                                 regulator-always-on;
 251                                 regulator-ramp-delay = <6250>;
 252                         };
 253
 254                         sw1c_reg: sw1c {
 255                                 regulator-min-microvolt = <300000>;
 256                                 regulator-max-microvolt = <1875000>;
 257                                 regulator-boot-on;
 258                                 regulator-always-on;
 259                                 regulator-ramp-delay = <6250>;
 260                         };
 261
 262                         sw2_reg: sw2 {
 263                                 regulator-min-microvolt = <800000>;
 264                                 regulator-max-microvolt = <3950000>;
 265                                 regulator-boot-on;
 266                                 regulator-always-on;
 267                         };
 268
 269                         sw3a_reg: sw3a {
 270                                 regulator-min-microvolt = <400000>;
 271                                 regulator-max-microvolt = <1975000>;
 272                                 regulator-boot-on;
 273                                 regulator-always-on;
 274                         };
 275
 276                         sw3b_reg: sw3b {
 277                                 regulator-min-microvolt = <400000>;
 278                                 regulator-max-microvolt = <1975000>;
 279                                 regulator-boot-on;
 280                                 regulator-always-on;
 281                         };
 282
 283                         sw4_reg: sw4 {
 284                                 regulator-min-microvolt = <800000>;
 285                                 regulator-max-microvolt = <3300000>;
 286                         };
 287
 288                         swbst_reg: swbst {
 289                                 regulator-min-microvolt = <5000000>;
 290                                 regulator-max-microvolt = <5150000>;
 291                                 regulator-boot-on;
 292                                 regulator-always-on;
 293                         };
 294
 295                         snvs_reg: vsnvs {
 296                                 regulator-min-microvolt = <1000000>;
 297                                 regulator-max-microvolt = <3000000>;
 298                                 regulator-boot-on;
 299                                 regulator-always-on;
 300                         };
 301
 302                         vref_reg: vrefddr {
 303                                 regulator-boot-on;
 304                                 regulator-always-on;
 305                         };
 306
 307                         vgen1_reg: vgen1 {
 308                                 regulator-min-microvolt = <800000>;
 309                                 regulator-max-microvolt = <1550000>;
 310                         };
 311
 312                         vgen2_reg: vgen2 {
 313                                 regulator-min-microvolt = <800000>;
 314                                 regulator-max-microvolt = <1550000>;
 315                         };
 316
 317                         vgen3_reg: vgen3 {
 318                                 regulator-min-microvolt = <1800000>;
 319                                 regulator-max-microvolt = <3300000>;
 320                         };
 321
 322                         vgen4_reg: vgen4 {
 323                                 regulator-min-microvolt = <1800000>;
 324                                 regulator-max-microvolt = <3300000>;
 325                                 regulator-always-on;
 326                         };
 327
 328                         vgen5_reg: vgen5 {
 329                                 regulator-min-microvolt = <1800000>;
 330                                 regulator-max-microvolt = <3300000>;
 331                                 regulator-always-on;
 332                         };
 333
 334                         vgen6_reg: vgen6 {
 335                                 regulator-min-microvolt = <1800000>;
 336                                 regulator-max-microvolt = <3300000>;
 337                                 regulator-always-on;
 338                         };
 339                 };
 340         };
 341 };
 342
 343 &i2c3 {
 344         clock-frequency = <100000>;
 345         pinctrl-names = "default";
 346         pinctrl-0 = <&pinctrl_i2c3>;
 347         status = "okay";
 348
 349         sgtl5000: audio-codec@a {
 350                 compatible = "fsl,sgtl5000";
 351                 reg = <0x0a>;
 352                 clocks = <&clks IMX6QDL_CLK_CKO>;
 353                 VDDA-supply = <&sw4_reg>;
 354                 VDDIO-supply = <&reg_3p3v>;
 355         };
 356
 357         touchscreen: egalax_ts@4 {
 358                 compatible = "eeti,egalax_ts";
 359                 reg = <0x04>;
 360                 interrupt-parent = <&gpio7>;
 361                 interrupts = <12 2>;
 362                 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 363         };
 364 };
 365
 366 &ldb {
 367         status = "okay";
 368
 369         lvds-channel@0 {
 370                 fsl,data-mapping = "spwg";
 371                 fsl,data-width = <18>;
 372                 status = "okay";
 373
 374                 display-timings {
 375                         native-mode = <&timing0>;
 376                         timing0: hsd100pxn1 {
 377                                 clock-frequency = <65000000>;
 378                                 hactive = <1024>;
 379                                 vactive = <768>;
 380                                 hback-porch = <220>;
 381                                 hfront-porch = <40>;
 382                                 vback-porch = <21>;
 383                                 vfront-porch = <7>;
 384                                 hsync-len = <60>;
 385                                 vsync-len = <10>;
 386                         };
 387                 };
 388         };
 389 };
 390
 391 &pcie {
 392         pinctrl-names = "default";
 393         pinctrl-0 = <&pinctrl_pcie>;
 394         reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 395         status = "okay";
 396 };
 397
 398 &pwm1 {
 399         pinctrl-names = "default";
 400         pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
 401         status = "disabled";
 402 };
 403
 404 &pwm2 {
 405         pinctrl-names = "default";
 406         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
 407         status = "disabled";
 408 };
 409
 410 &pwm3 {
 411         pinctrl-names = "default";
 412         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
 413         status = "disabled";
 414 };
 415
 416 &pwm4 {
 417         pinctrl-names = "default", "state_dio";
 418         pinctrl-0 = <&pinctrl_pwm4_backlight>;
 419         pinctrl-1 = <&pinctrl_pwm4_dio>;
 420         status = "okay";
 421 };
 422
 423 &ssi1 {
 424         status = "okay";
 425 };
 426
 427 &ssi2 {
 428         status = "okay";
 429 };
 430
 431 &uart1 {
 432         pinctrl-names = "default";
 433         pinctrl-0 = <&pinctrl_uart1>;
 434         rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 435         status = "okay";
 436 };
 437
 438 &uart2 {
 439         pinctrl-names = "default";
 440         pinctrl-0 = <&pinctrl_uart2>;
 441         status = "okay";
 442 };
 443
 444 &uart5 {
 445         pinctrl-names = "default";
 446         pinctrl-0 = <&pinctrl_uart5>;
 447         status = "okay";
 448 };
 449
 450 &usbotg {
 451         vbus-supply = <&reg_usb_otg_vbus>;
 452         pinctrl-names = "default";
 453         pinctrl-0 = <&pinctrl_usbotg>;
 454         disable-over-current;
 455         status = "okay";
 456 };
 457
 458 &usbh1 {
 459         vbus-supply = <&reg_usb_h1_vbus>;
 460         status = "okay";
 461 };
 462
 463 &usdhc3 {
 464         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 465         pinctrl-0 = <&pinctrl_usdhc3>;
 466         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 467         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 468         cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 469         vmmc-supply = <&reg_3p3v>;
 470         no-1-8-v; /* firmware will remove if board revision supports */
 471         status = "okay";
 472 };
 473
 474 &wdog1 {
 475         status = "disabled";
 476 };
 477
 478 &wdog2 {
 479         pinctrl-names = "default";
 480         pinctrl-0 = <&pinctrl_wdog>;
 481         fsl,ext-reset-output;
 482         status = "okay";
 483 };
 484
 485 &iomuxc {
 486         pinctrl_audmux: audmuxgrp {
 487                 fsl,pins = <
 488                         MX6QDL_PAD_SD2_DAT0__AUD4_RXD           0x130b0
 489                         MX6QDL_PAD_SD2_DAT3__AUD4_TXC           0x130b0
 490                         MX6QDL_PAD_SD2_DAT2__AUD4_TXD           0x110b0
 491                         MX6QDL_PAD_SD2_DAT1__AUD4_TXFS          0x130b0
 492                         MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0 /* AUD4_MCK */
 493                         MX6QDL_PAD_EIM_D25__AUD5_RXC            0x130b0
 494                         MX6QDL_PAD_DISP0_DAT19__AUD5_RXD        0x130b0
 495                         MX6QDL_PAD_EIM_D24__AUD5_RXFS           0x130b0
 496                 >;
 497         };
 498
 499         pinctrl_enet: enetgrp {
 500                 fsl,pins = <
 501                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 502                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 503                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 504                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 505                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 506                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 507                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 508                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 509                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 510                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 511                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 512                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 513                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 514                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 515                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 516                         MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
 517                 >;
 518         };
 519
 520         pinctrl_ecspi2: escpi2grp {
 521                 fsl,pins = <
 522                         MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
 523                         MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
 524                         MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
 525                         MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x100b1
 526                 >;
 527         };
 528
 529         pinctrl_flexcan1: flexcan1grp {
 530                 fsl,pins = <
 531                         MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b1
 532                         MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b1
 533                         MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x4001b0b0 /* CAN_STBY */
 534                 >;
 535         };
 536
 537         pinctrl_gpio_leds: gpioledsgrp {
 538                 fsl,pins = <
 539                         MX6QDL_PAD_KEY_COL0__GPIO4_IO06         0x1b0b0
 540                         MX6QDL_PAD_KEY_ROW0__GPIO4_IO07         0x1b0b0
 541                         MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x1b0b0
 542                 >;
 543         };
 544
 545         pinctrl_gpmi_nand: gpminandgrp {
 546                 fsl,pins = <
 547                         MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
 548                         MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
 549                         MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
 550                         MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
 551                         MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
 552                         MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
 553                         MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
 554                         MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
 555                         MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
 556                         MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
 557                         MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
 558                         MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
 559                         MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
 560                         MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
 561                         MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
 562                 >;
 563         };
 564
 565         pinctrl_i2c1: i2c1grp {
 566                 fsl,pins = <
 567                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 568                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 569                 >;
 570         };
 571
 572         pinctrl_i2c2: i2c2grp {
 573                 fsl,pins = <
 574                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 575                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 576                 >;
 577         };
 578
 579         pinctrl_i2c3: i2c3grp {
 580                 fsl,pins = <
 581                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 582                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 583                 >;
 584         };
 585
 586         pinctrl_pcie: pciegrp {
 587                 fsl,pins = <
 588                         MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x1b0b0 /* PCIE IRQ */
 589                         MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0 /* PCIE RST */
 590                 >;
 591         };
 592
 593         pinctrl_pps: ppsgrp {
 594                 fsl,pins = <
 595                         MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
 596                 >;
 597         };
 598
 599         pinctrl_pwm1: pwm1grp {
 600                 fsl,pins = <
 601                         MX6QDL_PAD_GPIO_9__PWM1_OUT             0x1b0b1
 602                 >;
 603         };
 604
 605         pinctrl_pwm2: pwm2grp {
 606                 fsl,pins = <
 607                         MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
 608                 >;
 609         };
 610
 611         pinctrl_pwm3: pwm3grp {
 612                 fsl,pins = <
 613                         MX6QDL_PAD_SD4_DAT1__PWM3_OUT           0x1b0b1
 614                 >;
 615         };
 616
 617         pinctrl_pwm4_backlight: pwm4grpbacklight {
 618                 fsl,pins = <
 619                         /* LVDS_PWM J6.5 */
 620                         MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
 621                 >;
 622         };
 623
 624         pinctrl_pwm4_dio: pwm4grpdio {
 625                 fsl,pins = <
 626                         /* DIO3 J16.4 */
 627                         MX6QDL_PAD_SD4_DAT2__PWM4_OUT           0x1b0b1
 628                 >;
 629         };
 630
 631         pinctrl_uart1: uart1grp {
 632                 fsl,pins = <
 633                         MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
 634                         MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
 635                         MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x4001b0b1 /* TEN */
 636                 >;
 637         };
 638
 639         pinctrl_uart2: uart2grp {
 640                 fsl,pins = <
 641                         MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
 642                         MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
 643                 >;
 644         };
 645
 646         pinctrl_uart5: uart5grp {
 647                 fsl,pins = <
 648                         MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 649                         MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 650                 >;
 651         };
 652
 653         pinctrl_usbotg: usbotggrp {
 654                 fsl,pins = <
 655                         MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 656                         MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* PWR_EN */
 657                 >;
 658         };
 659
 660         pinctrl_usdhc3: usdhc3grp {
 661                 fsl,pins = <
 662                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 663                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 664                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 665                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 666                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 667                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 668                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x17059 /* CD */
 669                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x17059
 670                 >;
 671         };
 672
 673         pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
 674                 fsl,pins = <
 675                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170b9
 676                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100b9
 677                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170b9
 678                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170b9
 679                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170b9
 680                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170b9
 681                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170b9 /* CD */
 682                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170b9
 683                 >;
 684         };
 685
 686         pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
 687                 fsl,pins = <
 688                         MX6QDL_PAD_SD3_CMD__SD3_CMD             0x170f9
 689                         MX6QDL_PAD_SD3_CLK__SD3_CLK             0x100f9
 690                         MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x170f9
 691                         MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x170f9
 692                         MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x170f9
 693                         MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x170f9
 694                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x170f9 /* CD */
 695                         MX6QDL_PAD_NANDF_CS1__SD3_VSELECT       0x170f9
 696                 >;
 697         };
 698
 699         pinctrl_wdog: wdoggrp {
 700                 fsl,pins = <
 701                         MX6QDL_PAD_SD1_DAT3__WDOG2_B            0x1b0b0
 702                 >;
 703         };
 704 };