arch/arm/boot/dts/meson8b.dtsi

   1 // SPDX-License-Identifier: GPL-2.0 OR MIT
   2 /*
   3  * Copyright 2015 Endless Mobile, Inc.
   4  * Author: Carlo Caione <carlo@endlessm.com>
   5  */
   6
   7 #include <dt-bindings/clock/meson8b-clkc.h>
   8 #include <dt-bindings/gpio/meson8b-gpio.h>
   9 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
  10 #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
  11 #include "meson.dtsi"
  12
  13 / {
  14         cpus {
  15                 #address-cells = <1>;
  16                 #size-cells = <0>;
  17
  18                 cpu0: cpu@200 {
  19                         device_type = "cpu";
  20                         compatible = "arm,cortex-a5";
  21                         next-level-cache = <&L2>;
  22                         reg = <0x200>;
  23                         enable-method = "amlogic,meson8b-smp";
  24                         resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
  25                         operating-points-v2 = <&cpu_opp_table>;
  26                         clocks = <&clkc CLKID_CPUCLK>;
  27                 };
  28
  29                 cpu1: cpu@201 {
  30                         device_type = "cpu";
  31                         compatible = "arm,cortex-a5";
  32                         next-level-cache = <&L2>;
  33                         reg = <0x201>;
  34                         enable-method = "amlogic,meson8b-smp";
  35                         resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
  36                         operating-points-v2 = <&cpu_opp_table>;
  37                         clocks = <&clkc CLKID_CPUCLK>;
  38                 };
  39
  40                 cpu2: cpu@202 {
  41                         device_type = "cpu";
  42                         compatible = "arm,cortex-a5";
  43                         next-level-cache = <&L2>;
  44                         reg = <0x202>;
  45                         enable-method = "amlogic,meson8b-smp";
  46                         resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
  47                         operating-points-v2 = <&cpu_opp_table>;
  48                         clocks = <&clkc CLKID_CPUCLK>;
  49                 };
  50
  51                 cpu3: cpu@203 {
  52                         device_type = "cpu";
  53                         compatible = "arm,cortex-a5";
  54                         next-level-cache = <&L2>;
  55                         reg = <0x203>;
  56                         enable-method = "amlogic,meson8b-smp";
  57                         resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
  58                         operating-points-v2 = <&cpu_opp_table>;
  59                         clocks = <&clkc CLKID_CPUCLK>;
  60                 };
  61         };
  62
  63         cpu_opp_table: opp-table {
  64                 compatible = "operating-points-v2";
  65                 opp-shared;
  66
  67                 opp-96000000 {
  68                         opp-hz = /bits/ 64 <96000000>;
  69                         opp-microvolt = <860000>;
  70                 };
  71                 opp-192000000 {
  72                         opp-hz = /bits/ 64 <192000000>;
  73                         opp-microvolt = <860000>;
  74                 };
  75                 opp-312000000 {
  76                         opp-hz = /bits/ 64 <312000000>;
  77                         opp-microvolt = <860000>;
  78                 };
  79                 opp-408000000 {
  80                         opp-hz = /bits/ 64 <408000000>;
  81                         opp-microvolt = <860000>;
  82                 };
  83                 opp-504000000 {
  84                         opp-hz = /bits/ 64 <504000000>;
  85                         opp-microvolt = <860000>;
  86                 };
  87                 opp-600000000 {
  88                         opp-hz = /bits/ 64 <600000000>;
  89                         opp-microvolt = <860000>;
  90                 };
  91                 opp-720000000 {
  92                         opp-hz = /bits/ 64 <720000000>;
  93                         opp-microvolt = <860000>;
  94                 };
  95                 opp-816000000 {
  96                         opp-hz = /bits/ 64 <816000000>;
  97                         opp-microvolt = <900000>;
  98                 };
  99                 opp-1008000000 {
 100                         opp-hz = /bits/ 64 <1008000000>;
 101                         opp-microvolt = <1140000>;
 102                 };
 103                 opp-1200000000 {
 104                         opp-hz = /bits/ 64 <1200000000>;
 105                         opp-microvolt = <1140000>;
 106                 };
 107                 opp-1320000000 {
 108                         opp-hz = /bits/ 64 <1320000000>;
 109                         opp-microvolt = <1140000>;
 110                 };
 111                 opp-1488000000 {
 112                         opp-hz = /bits/ 64 <1488000000>;
 113                         opp-microvolt = <1140000>;
 114                 };
 115                 opp-1536000000 {
 116                         opp-hz = /bits/ 64 <1536000000>;
 117                         opp-microvolt = <1140000>;
 118                 };
 119         };
 120
 121         gpu_opp_table: gpu-opp-table {
 122                 compatible = "operating-points-v2";
 123
 124                 opp-255000000 {
 125                         opp-hz = /bits/ 64 <255000000>;
 126                         opp-microvolt = <1100000>;
 127                 };
 128                 opp-364300000 {
 129                         opp-hz = /bits/ 64 <364300000>;
 130                         opp-microvolt = <1100000>;
 131                 };
 132                 opp-425000000 {
 133                         opp-hz = /bits/ 64 <425000000>;
 134                         opp-microvolt = <1100000>;
 135                 };
 136                 opp-510000000 {
 137                         opp-hz = /bits/ 64 <510000000>;
 138                         opp-microvolt = <1100000>;
 139                 };
 140                 opp-637500000 {
 141                         opp-hz = /bits/ 64 <637500000>;
 142                         opp-microvolt = <1100000>;
 143                         turbo-mode;
 144                 };
 145         };
 146
 147         pmu {
 148                 compatible = "arm,cortex-a5-pmu";
 149                 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 150                              <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
 151                              <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 152                              <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 153                 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 154         };
 155
 156         reserved-memory {
 157                 #address-cells = <1>;
 158                 #size-cells = <1>;
 159                 ranges;
 160
 161                 /* 2 MiB reserved for Hardware ROM Firmware? */
 162                 hwrom@0 {
 163                         reg = <0x0 0x200000>;
 164                         no-map;
 165                 };
 166         };
 167
 168         mmcbus: bus@c8000000 {
 169                 compatible = "simple-bus";
 170                 reg = <0xc8000000 0x8000>;
 171                 #address-cells = <1>;
 172                 #size-cells = <1>;
 173                 ranges = <0x0 0xc8000000 0x8000>;
 174
 175                 dmcbus: bus@6000 {
 176                         compatible = "simple-bus";
 177                         reg = <0x6000 0x400>;
 178                         #address-cells = <1>;
 179                         #size-cells = <1>;
 180                         ranges = <0x0 0x6000 0x400>;
 181
 182                         canvas: video-lut@48 {
 183                                 compatible = "amlogic,meson8b-canvas",
 184                                              "amlogic,canvas";
 185                                 reg = <0x48 0x14>;
 186                         };
 187                 };
 188         };
 189
 190         apb: bus@d0000000 {
 191                 compatible = "simple-bus";
 192                 reg = <0xd0000000 0x200000>;
 193                 #address-cells = <1>;
 194                 #size-cells = <1>;
 195                 ranges = <0x0 0xd0000000 0x200000>;
 196
 197                 mali: gpu@c0000 {
 198                         compatible = "amlogic,meson8b-mali", "arm,mali-450";
 199                         reg = <0xc0000 0x40000>;
 200                         interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 201                                      <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
 202                                      <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
 203                                      <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
 204                                      <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
 205                                      <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
 206                                      <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
 207                                      <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 208                         interrupt-names = "gp", "gpmmu", "pp", "pmu",
 209                                           "pp0", "ppmmu0", "pp1", "ppmmu1";
 210                         resets = <&reset RESET_MALI>;
 211                         clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
 212                         clock-names = "bus", "core";
 213                         operating-points-v2 = <&gpu_opp_table>;
 214                 };
 215         };
 216 }; /* end of / */
 217
 218 &aobus {
 219         pmu: pmu@e0 {
 220                 compatible = "amlogic,meson8b-pmu", "syscon";
 221                 reg = <0xe0 0x18>;
 222         };
 223
 224         pinctrl_aobus: pinctrl@84 {
 225                 compatible = "amlogic,meson8b-aobus-pinctrl";
 226                 reg = <0x84 0xc>;
 227                 #address-cells = <1>;
 228                 #size-cells = <1>;
 229                 ranges;
 230
 231                 gpio_ao: ao-bank@14 {
 232                         reg = <0x14 0x4>,
 233                                 <0x2c 0x4>,
 234                                 <0x24 0x8>;
 235                         reg-names = "mux", "pull", "gpio";
 236                         gpio-controller;
 237                         #gpio-cells = <2>;
 238                         gpio-ranges = <&pinctrl_aobus 0 0 16>;
 239                 };
 240
 241                 uart_ao_a_pins: uart_ao_a {
 242                         mux {
 243                                 groups = "uart_tx_ao_a", "uart_rx_ao_a";
 244                                 function = "uart_ao";
 245                                 bias-disable;
 246                         };
 247                 };
 248
 249                 ir_recv_pins: remote {
 250                         mux {
 251                                 groups = "remote_input";
 252                                 function = "remote";
 253                                 bias-disable;
 254                         };
 255                 };
 256         };
 257 };
 258
 259 &cbus {
 260         reset: reset-controller@4404 {
 261                 compatible = "amlogic,meson8b-reset";
 262                 reg = <0x4404 0x9c>;
 263                 #reset-cells = <1>;
 264         };
 265
 266         analog_top: analog-top@81a8 {
 267                 compatible = "amlogic,meson8b-analog-top", "syscon";
 268                 reg = <0x81a8 0x14>;
 269         };
 270
 271         pwm_ef: pwm@86c0 {
 272                 compatible = "amlogic,meson8b-pwm";
 273                 reg = <0x86c0 0x10>;
 274                 #pwm-cells = <3>;
 275                 status = "disabled";
 276         };
 277
 278         clock-measure@8758 {
 279                 compatible = "amlogic,meson8b-clk-measure";
 280                 reg = <0x8758 0x1c>;
 281         };
 282
 283         pinctrl_cbus: pinctrl@9880 {
 284                 compatible = "amlogic,meson8b-cbus-pinctrl";
 285                 reg = <0x9880 0x10>;
 286                 #address-cells = <1>;
 287                 #size-cells = <1>;
 288                 ranges;
 289
 290                 gpio: banks@80b0 {
 291                         reg = <0x80b0 0x28>,
 292                                 <0x80e8 0x18>,
 293                                 <0x8120 0x18>,
 294                                 <0x8030 0x38>;
 295                         reg-names = "mux", "pull", "pull-enable", "gpio";
 296                         gpio-controller;
 297                         #gpio-cells = <2>;
 298                         gpio-ranges = <&pinctrl_cbus 0 0 83>;
 299                 };
 300
 301                 eth_rgmii_pins: eth-rgmii {
 302                         mux {
 303                                 groups = "eth_tx_clk",
 304                                          "eth_tx_en",
 305                                          "eth_txd1_0",
 306                                          "eth_txd0_0",
 307                                          "eth_rx_clk",
 308                                          "eth_rx_dv",
 309                                          "eth_rxd1",
 310                                          "eth_rxd0",
 311                                          "eth_mdio_en",
 312                                          "eth_mdc",
 313                                          "eth_ref_clk",
 314                                          "eth_txd2",
 315                                          "eth_txd3",
 316                                          "eth_rxd3",
 317                                          "eth_rxd2";
 318                                 function = "ethernet";
 319                                 bias-disable;
 320                         };
 321                 };
 322
 323                 eth_rmii_pins: eth-rmii {
 324                         mux {
 325                                 groups = "eth_tx_en",
 326                                          "eth_txd1_0",
 327                                          "eth_txd0_0",
 328                                          "eth_rx_clk",
 329                                          "eth_rx_dv",
 330                                          "eth_rxd1",
 331                                          "eth_rxd0",
 332                                          "eth_mdio_en",
 333                                          "eth_mdc";
 334                                 function = "ethernet";
 335                                 bias-disable;
 336                         };
 337                 };
 338
 339                 i2c_a_pins: i2c-a {
 340                         mux {
 341                                 groups = "i2c_sda_a", "i2c_sck_a";
 342                                 function = "i2c_a";
 343                                 bias-disable;
 344                         };
 345                 };
 346
 347                 sd_b_pins: sd-b {
 348                         mux {
 349                                 groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
 350                                         "sd_d3_b", "sd_clk_b", "sd_cmd_b";
 351                                 function = "sd_b";
 352                                 bias-disable;
 353                         };
 354                 };
 355
 356                 pwm_c1_pins: pwm-c1 {
 357                         mux {
 358                                 groups = "pwm_c1";
 359                                 function = "pwm_c";
 360                                 bias-disable;
 361                         };
 362                 };
 363
 364                 pwm_d_pins: pwm-d {
 365                         mux {
 366                                 groups = "pwm_d";
 367                                 function = "pwm_d";
 368                                 bias-disable;
 369                         };
 370                 };
 371
 372                 uart_b0_pins: uart-b0 {
 373                         mux {
 374                                 groups = "uart_tx_b0",
 375                                        "uart_rx_b0";
 376                                 function = "uart_b";
 377                                 bias-disable;
 378                         };
 379                 };
 380
 381                 uart_b0_cts_rts_pins: uart-b0-cts-rts {
 382                         mux {
 383                                 groups = "uart_cts_b0",
 384                                        "uart_rts_b0";
 385                                 function = "uart_b";
 386                                 bias-disable;
 387                         };
 388                 };
 389         };
 390 };
 391
 392 &ahb_sram {
 393         smp-sram@1ff80 {
 394                 compatible = "amlogic,meson8b-smp-sram";
 395                 reg = <0x1ff80 0x8>;
 396         };
 397 };
 398
 399
 400 &efuse {
 401         compatible = "amlogic,meson8b-efuse";
 402         clocks = <&clkc CLKID_EFUSE>;
 403         clock-names = "core";
 404
 405         temperature_calib: calib@1f4 {
 406                 /* only the upper two bytes are relevant */
 407                 reg = <0x1f4 0x4>;
 408         };
 409 };
 410
 411 &ethmac {
 412         compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac";
 413
 414         reg = <0xc9410000 0x10000
 415                0xc1108140 0x4>;
 416
 417         clocks = <&clkc CLKID_ETH>,
 418                  <&clkc CLKID_MPLL2>,
 419                  <&clkc CLKID_MPLL2>;
 420         clock-names = "stmmaceth", "clkin0", "clkin1";
 421         rx-fifo-depth = <4096>;
 422         tx-fifo-depth = <2048>;
 423
 424         resets = <&reset RESET_ETHERNET>;
 425         reset-names = "stmmaceth";
 426 };
 427
 428 &gpio_intc {
 429         compatible = "amlogic,meson-gpio-intc",
 430                      "amlogic,meson8b-gpio-intc";
 431         status = "okay";
 432 };
 433
 434 &hhi {
 435         clkc: clock-controller {
 436                 compatible = "amlogic,meson8-clkc";
 437                 #clock-cells = <1>;
 438                 #reset-cells = <1>;
 439         };
 440 };
 441
 442 &hwrng {
 443         compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
 444         clocks = <&clkc CLKID_RNG0>;
 445         clock-names = "core";
 446 };
 447
 448 &i2c_AO {
 449         clocks = <&clkc CLKID_CLK81>;
 450 };
 451
 452 &i2c_A {
 453         clocks = <&clkc CLKID_I2C>;
 454 };
 455
 456 &i2c_B {
 457         clocks = <&clkc CLKID_I2C>;
 458 };
 459
 460 &L2 {
 461         arm,data-latency = <3 3 3>;
 462         arm,tag-latency = <2 2 2>;
 463         arm,filter-ranges = <0x100000 0xc0000000>;
 464         prefetch-data = <1>;
 465         prefetch-instr = <1>;
 466         arm,shared-override;
 467 };
 468
 469 &periph {
 470         scu@0 {
 471                 compatible = "arm,cortex-a5-scu";
 472                 reg = <0x0 0x100>;
 473         };
 474
 475         timer@200 {
 476                 compatible = "arm,cortex-a5-global-timer";
 477                 reg = <0x200 0x20>;
 478                 interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 479                 clocks = <&clkc CLKID_PERIPH>;
 480
 481                 /*
 482                  * the arm_global_timer driver currently does not handle clock
 483                  * rate changes. Keep it disabled for now.
 484                  */
 485                 status = "disabled";
 486         };
 487
 488         timer@600 {
 489                 compatible = "arm,cortex-a5-twd-timer";
 490                 reg = <0x600 0x20>;
 491                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 492                 clocks = <&clkc CLKID_PERIPH>;
 493         };
 494 };
 495
 496 &pwm_ab {
 497         compatible = "amlogic,meson8b-pwm";
 498 };
 499
 500 &pwm_cd {
 501         compatible = "amlogic,meson8b-pwm";
 502 };
 503
 504 &rtc {
 505         compatible = "amlogic,meson8b-rtc";
 506         resets = <&reset RESET_RTC>;
 507 };
 508
 509 &saradc {
 510         compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
 511         clocks = <&clkc CLKID_XTAL>,
 512                 <&clkc CLKID_SAR_ADC>;
 513         clock-names = "clkin", "core";
 514         amlogic,hhi-sysctrl = <&hhi>;
 515         nvmem-cells = <&temperature_calib>;
 516         nvmem-cell-names = "temperature_calib";
 517 };
 518
 519 &sdio {
 520         compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
 521         clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
 522         clock-names = "core", "clkin";
 523 };
 524
 525 &timer_abcde {
 526         clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
 527         clock-names = "xtal", "pclk";
 528 };
 529
 530 &uart_AO {
 531         compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
 532         clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
 533         clock-names = "baud", "xtal", "pclk";
 534 };
 535
 536 &uart_A {
 537         compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
 538         clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>;
 539         clock-names = "baud", "xtal", "pclk";
 540 };
 541
 542 &uart_B {
 543         compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
 544         clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>;
 545         clock-names = "baud", "xtal", "pclk";
 546 };
 547
 548 &uart_C {
 549         compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
 550         clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>;
 551         clock-names = "baud", "xtal", "pclk";
 552 };
 553
 554 &usb0 {
 555         compatible = "amlogic,meson8b-usb", "snps,dwc2";
 556         clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
 557         clock-names = "otg";
 558 };
 559
 560 &usb1 {
 561         compatible = "amlogic,meson8b-usb", "snps,dwc2";
 562         clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
 563         clock-names = "otg";
 564 };
 565
 566 &usb0_phy {
 567         compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
 568         clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
 569         clock-names = "usb_general", "usb";
 570         resets = <&reset RESET_USB_OTG>;
 571 };
 572
 573 &usb1_phy {
 574         compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
 575         clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
 576         clock-names = "usb_general", "usb";
 577         resets = <&reset RESET_USB_OTG>;
 578 };
 579
 580 &wdt {
 581         compatible = "amlogic,meson8b-wdt";
 582 };