1 // SPDX-License-Identifier: GPL-2.0
4 #include <dt-bindings/input/input.h>
5 #include "tegra114.dtsi"
8 model = "Tegra Note 7";
9 compatible = "nvidia,tn7", "nvidia,tegra114";
12 /* TN7's bootloader's arguments need to be overridden */
13 bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
14 /* TN7's bootloader will place initrd at this address */
15 linux,initrd-start = <0x82000000>;
16 linux,initrd-end = <0x82800000>;
25 compatible = "tlm,trusted-foundations";
26 tlm,version-major = <2>;
27 tlm,version-minor = <8>;
32 /* memory >= 0x37e00000 is reserved for firmware usage */
33 reg = <0x80000000 0x37e00000>;
40 vdd-supply = <&vdd_1v2_ap>;
43 compatible = "lg,ld070wx3-sl01";
46 power-supply = <&vdd_lcd>;
47 backlight = <&backlight>;
62 clock-frequency = <400000>;
65 compatible = "ti,palmas";
67 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
69 #interrupt-cells = <2>;
72 ti,system-power-controller;
75 compatible = "ti,palmas-gpio";
81 compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
83 ldoln-in-supply = <&vdd_smps10_out2>;
87 regulator-name = "vd-cpu";
88 regulator-min-microvolt = <1000000>;
89 regulator-max-microvolt = <1000000>;
95 regulator-name = "vd-soc";
96 regulator-min-microvolt = <1100000>;
97 regulator-max-microvolt = <1100000>;
103 regulator-name = "va-lcd-hv";
104 regulator-min-microvolt = <3000000>;
105 regulator-max-microvolt = <3000000>;
111 regulator-name = "vd-ddr";
112 regulator-min-microvolt = <1350000>;
113 regulator-max-microvolt = <1350000>;
119 regulator-name = "vs-pmu-1v8";
120 regulator-min-microvolt = <1800000>;
121 regulator-max-microvolt = <1800000>;
127 regulator-name = "vs-sys-2v9";
128 regulator-min-microvolt = <2900000>;
129 regulator-max-microvolt = <2900000>;
134 vdd_smps10_out1: smps10_out1 {
135 regulator-name = "vd-smps10-out1";
136 regulator-min-microvolt = <5000000>;
137 regulator-max-microvolt = <5000000>;
142 vdd_smps10_out2: smps10_out2 {
143 regulator-name = "vd-smps10-out2";
144 regulator-min-microvolt = <5000000>;
145 regulator-max-microvolt = <5000000>;
151 regulator-name = "va-pllx";
152 regulator-min-microvolt = <1050000>;
153 regulator-max-microvolt = <1050000>;
159 regulator-name = "va-ap-1v2";
160 regulator-min-microvolt = <1200000>;
161 regulator-max-microvolt = <1200000>;
167 regulator-name = "vd-fuse";
168 regulator-min-microvolt = <1800000>;
169 regulator-max-microvolt = <1800000>;
175 regulator-name = "vd-ts-hv";
176 regulator-min-microvolt = <3200000>;
177 regulator-max-microvolt = <3200000>;
183 regulator-name = "va-cam2-hv";
184 regulator-min-microvolt = <2700000>;
185 regulator-max-microvolt = <2700000>;
189 regulator-name = "va-sns-hv";
190 regulator-min-microvolt = <2850000>;
191 regulator-max-microvolt = <2850000>;
195 regulator-name = "va-cam1-hv";
196 regulator-min-microvolt = <2700000>;
197 regulator-max-microvolt = <2700000>;
201 regulator-name = "va-ap-rtc";
202 regulator-min-microvolt = <1100000>;
203 regulator-max-microvolt = <1100000>;
204 ti,enable-ldo8-tracking;
210 regulator-name = "vi-sdcard";
211 regulator-min-microvolt = <2900000>;
212 regulator-max-microvolt = <2900000>;
216 regulator-name = "avdd-usb";
217 regulator-min-microvolt = <3300000>;
218 regulator-max-microvolt = <3300000>;
224 regulator-name = "va-hdmi";
225 regulator-min-microvolt = <3300000>;
226 regulator-max-microvolt = <3300000>;
232 compatible = "ti,palmas-rtc";
233 interrupt-parent = <&palmas>;
241 nvidia,invert-interrupt;
257 nvidia,xcvr-setup = <7>;
258 nvidia,xcvr-lsfslew = <2>;
259 nvidia,xcvr-lsrslew = <2>;
260 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
261 /* Should be changed to "otg" once we have vbus_supply */
262 /* As of now, USB devices need to be powered externally */
266 backlight: backlight {
267 compatible = "pwm-backlight";
268 pwms = <&pwm 1 40000>;
270 brightness-levels = <0 4 8 16 32 64 128 255>;
271 default-brightness-level = <6>;
273 power-supply = <&lcd_bl_en>;
277 compatible = "simple-bus";
278 #address-cells = <1>;
282 compatible = "fixed-clock";
285 clock-frequency = <32768>;
290 compatible = "gpio-keys";
294 gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
295 linux,code = <KEY_POWER>;
300 label = "Volume Down";
301 gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
302 linux,code = <KEY_VOLUMEDOWN>;
307 gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
308 linux,code = <KEY_VOLUMEUP>;
313 compatible = "simple-bus";
314 #address-cells = <1>;
317 /* FIXME: output of BQ24192 */
318 vs_sys: regulator@0 {
319 compatible = "regulator-fixed";
321 regulator-name = "VS_SYS";
322 regulator-min-microvolt = <4200000>;
323 regulator-max-microvolt = <4200000>;
328 lcd_bl_en: regulator@1 {
329 compatible = "regulator-fixed";
331 regulator-name = "VDD_LCD_BL";
332 regulator-min-microvolt = <16500000>;
333 regulator-max-microvolt = <16500000>;
334 gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
336 vin-supply = <&vs_sys>;
340 vdd_lcd: regulator@2 {
341 compatible = "regulator-fixed";
343 regulator-name = "VD_LCD_1V8";
344 regulator-min-microvolt = <1800000>;
345 regulator-max-microvolt = <1800000>;
346 gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
348 vin-supply = <&vdd_1v8>;