arch/arm64/boot/dts/actions/s900.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2017 Andreas Färber
   4  */
   5
   6 #include <dt-bindings/clock/actions,s900-cmu.h>
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/interrupt-controller/arm-gic.h>
   9 #include <dt-bindings/reset/actions,s900-reset.h>
  10
  11 / {
  12         compatible = "actions,s900";
  13         interrupt-parent = <&gic>;
  14         #address-cells = <2>;
  15         #size-cells = <2>;
  16
  17         cpus {
  18                 #address-cells = <2>;
  19                 #size-cells = <0>;
  20
  21                 cpu0: cpu@0 {
  22                         device_type = "cpu";
  23                         compatible = "arm,cortex-a53";
  24                         reg = <0x0 0x0>;
  25                         enable-method = "psci";
  26                 };
  27
  28                 cpu1: cpu@1 {
  29                         device_type = "cpu";
  30                         compatible = "arm,cortex-a53";
  31                         reg = <0x0 0x1>;
  32                         enable-method = "psci";
  33                 };
  34
  35                 cpu2: cpu@2 {
  36                         device_type = "cpu";
  37                         compatible = "arm,cortex-a53";
  38                         reg = <0x0 0x2>;
  39                         enable-method = "psci";
  40                 };
  41
  42                 cpu3: cpu@3 {
  43                         device_type = "cpu";
  44                         compatible = "arm,cortex-a53";
  45                         reg = <0x0 0x3>;
  46                         enable-method = "psci";
  47                 };
  48         };
  49
  50         reserved-memory {
  51                 #address-cells = <2>;
  52                 #size-cells = <2>;
  53                 ranges;
  54
  55                 secmon@1f000000 {
  56                         reg = <0x0 0x1f000000 0x0 0x1000000>;
  57                         no-map;
  58                 };
  59         };
  60
  61         psci {
  62                 compatible = "arm,psci-0.2";
  63                 method = "smc";
  64         };
  65
  66         arm-pmu {
  67                 compatible = "arm,cortex-a53-pmu";
  68                 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
  69                              <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
  70                              <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
  71                              <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
  72                 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
  73         };
  74
  75         timer {
  76                 compatible = "arm,armv8-timer";
  77                 interrupts = <GIC_PPI 13
  78                         (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
  79                              <GIC_PPI 14
  80                         (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
  81                              <GIC_PPI 11
  82                         (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
  83                              <GIC_PPI 10
  84                         (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
  85         };
  86
  87         hosc: hosc {
  88                 compatible = "fixed-clock";
  89                 clock-frequency = <24000000>;
  90                 #clock-cells = <0>;
  91         };
  92
  93         losc: losc {
  94                 compatible = "fixed-clock";
  95                 clock-frequency = <32768>;
  96                 #clock-cells = <0>;
  97         };
  98
  99         diff24M: diff24M {
 100                 compatible = "fixed-clock";
 101                 clock-frequency = <24000000>;
 102                 #clock-cells = <0>;
 103         };
 104
 105         soc {
 106                 compatible = "simple-bus";
 107                 #address-cells = <2>;
 108                 #size-cells = <2>;
 109                 ranges;
 110
 111                 gic: interrupt-controller@e00f1000 {
 112                         compatible = "arm,gic-400";
 113                         reg = <0x0 0xe00f1000 0x0 0x1000>,
 114                               <0x0 0xe00f2000 0x0 0x2000>,
 115                               <0x0 0xe00f4000 0x0 0x2000>,
 116                               <0x0 0xe00f6000 0x0 0x2000>;
 117                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 118                         interrupt-controller;
 119                         #interrupt-cells = <3>;
 120                 };
 121
 122                 uart0: serial@e0120000 {
 123                         compatible = "actions,s900-uart", "actions,owl-uart";
 124                         reg = <0x0 0xe0120000 0x0 0x2000>;
 125                         clocks = <&cmu CLK_UART0>;
 126                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 127                         status = "disabled";
 128                 };
 129
 130                 uart1: serial@e0122000 {
 131                         compatible = "actions,s900-uart", "actions,owl-uart";
 132                         reg = <0x0 0xe0122000 0x0 0x2000>;
 133                         clocks = <&cmu CLK_UART1>;
 134                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 135                         status = "disabled";
 136                 };
 137
 138                 uart2: serial@e0124000 {
 139                         compatible = "actions,s900-uart", "actions,owl-uart";
 140                         reg = <0x0 0xe0124000 0x0 0x2000>;
 141                         clocks = <&cmu CLK_UART2>;
 142                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 143                         status = "disabled";
 144                 };
 145
 146                 uart3: serial@e0126000 {
 147                         compatible = "actions,s900-uart", "actions,owl-uart";
 148                         reg = <0x0 0xe0126000 0x0 0x2000>;
 149                         clocks = <&cmu CLK_UART3>;
 150                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 151                         status = "disabled";
 152                 };
 153
 154                 uart4: serial@e0128000 {
 155                         compatible = "actions,s900-uart", "actions,owl-uart";
 156                         reg = <0x0 0xe0128000 0x0 0x2000>;
 157                         clocks = <&cmu CLK_UART4>;
 158                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 159                         status = "disabled";
 160                 };
 161
 162                 uart5: serial@e012a000 {
 163                         compatible = "actions,s900-uart", "actions,owl-uart";
 164                         reg = <0x0 0xe012a000 0x0 0x2000>;
 165                         clocks = <&cmu CLK_UART5>;
 166                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 167                         status = "disabled";
 168                 };
 169
 170                 uart6: serial@e012c000 {
 171                         compatible = "actions,s900-uart", "actions,owl-uart";
 172                         reg = <0x0 0xe012c000 0x0 0x2000>;
 173                         clocks = <&cmu CLK_UART6>;
 174                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 175                         status = "disabled";
 176                 };
 177
 178                 sps: power-controller@e012e000 {
 179                         compatible = "actions,s900-sps";
 180                         reg = <0x0 0xe012e000 0x0 0x2000>;
 181                         #power-domain-cells = <1>;
 182                 };
 183
 184                 cmu: clock-controller@e0160000 {
 185                         compatible = "actions,s900-cmu";
 186                         reg = <0x0 0xe0160000 0x0 0x1000>;
 187                         clocks = <&hosc>, <&losc>;
 188                         #clock-cells = <1>;
 189                         #reset-cells = <1>;
 190                 };
 191
 192                 i2c0: i2c@e0170000 {
 193                         compatible = "actions,s900-i2c";
 194                         reg = <0 0xe0170000 0 0x1000>;
 195                         clocks = <&cmu CLK_I2C0>;
 196                         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 197                         #address-cells = <1>;
 198                         #size-cells = <0>;
 199                         status = "disabled";
 200                 };
 201
 202                 i2c1: i2c@e0172000 {
 203                         compatible = "actions,s900-i2c";
 204                         reg = <0 0xe0172000 0 0x1000>;
 205                         clocks = <&cmu CLK_I2C1>;
 206                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 207                         #address-cells = <1>;
 208                         #size-cells = <0>;
 209                         status = "disabled";
 210                 };
 211
 212                 i2c2: i2c@e0174000 {
 213                         compatible = "actions,s900-i2c";
 214                         reg = <0 0xe0174000 0 0x1000>;
 215                         clocks = <&cmu CLK_I2C2>;
 216                         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 217                         #address-cells = <1>;
 218                         #size-cells = <0>;
 219                         status = "disabled";
 220                 };
 221
 222                 i2c3: i2c@e0176000 {
 223                         compatible = "actions,s900-i2c";
 224                         reg = <0 0xe0176000 0 0x1000>;
 225                         clocks = <&cmu CLK_I2C3>;
 226                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 227                         #address-cells = <1>;
 228                         #size-cells = <0>;
 229                         status = "disabled";
 230                 };
 231
 232                 i2c4: i2c@e0178000 {
 233                         compatible = "actions,s900-i2c";
 234                         reg = <0 0xe0178000 0 0x1000>;
 235                         clocks = <&cmu CLK_I2C4>;
 236                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 237                         #address-cells = <1>;
 238                         #size-cells = <0>;
 239                         status = "disabled";
 240                 };
 241
 242                 i2c5: i2c@e017a000 {
 243                         compatible = "actions,s900-i2c";
 244                         reg = <0 0xe017a000 0 0x1000>;
 245                         clocks = <&cmu CLK_I2C5>;
 246                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 247                         #address-cells = <1>;
 248                         #size-cells = <0>;
 249                         status = "disabled";
 250                 };
 251
 252                 pinctrl: pinctrl@e01b0000 {
 253                         compatible = "actions,s900-pinctrl";
 254                         reg = <0x0 0xe01b0000 0x0 0x1000>;
 255                         clocks = <&cmu CLK_GPIO>;
 256                         gpio-controller;
 257                         gpio-ranges = <&pinctrl 0 0 146>;
 258                         #gpio-cells = <2>;
 259                         interrupt-controller;
 260                         #interrupt-cells = <2>;
 261                         interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 262                                      <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
 263                                      <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
 264                                      <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
 265                                      <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 266                                      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 267                 };
 268
 269                 timer: timer@e0228000 {
 270                         compatible = "actions,s900-timer";
 271                         reg = <0x0 0xe0228000 0x0 0x8000>;
 272                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 273                         interrupt-names = "timer1";
 274                 };
 275
 276                 dma: dma-controller@e0260000 {
 277                         compatible = "actions,s900-dma";
 278                         reg = <0x0 0xe0260000 0x0 0x1000>;
 279                         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
 280                                      <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
 281                                      <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
 282                                      <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 283                         #dma-cells = <1>;
 284                         dma-channels = <12>;
 285                         dma-requests = <46>;
 286                         clocks = <&cmu CLK_DMAC>;
 287                 };
 288
 289                 mmc0: mmc@e0330000 {
 290                         compatible = "actions,owl-mmc";
 291                         reg = <0x0 0xe0330000 0x0 0x4000>;
 292                         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 293                         clocks = <&cmu CLK_SD0>;
 294                         resets = <&cmu RESET_SD0>;
 295                         dmas = <&dma 2>;
 296                         dma-names = "mmc";
 297                         status = "disabled";
 298                 };
 299
 300                 mmc1: mmc@e0334000 {
 301                         compatible = "actions,owl-mmc";
 302                         reg = <0x0 0xe0334000 0x0 0x4000>;
 303                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 304                         clocks = <&cmu CLK_SD1>;
 305                         resets = <&cmu RESET_SD1>;
 306                         dmas = <&dma 3>;
 307                         dma-names = "mmc";
 308                         status = "disabled";
 309                 };
 310
 311                 mmc2: mmc@e0338000 {
 312                         compatible = "actions,owl-mmc";
 313                         reg = <0x0 0xe0338000 0x0 0x4000>;
 314                         interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 315                         clocks = <&cmu CLK_SD2>;
 316                         resets = <&cmu RESET_SD2>;
 317                         dmas = <&dma 4>;
 318                         dma-names = "mmc";
 319                         status = "disabled";
 320                 };
 321
 322                 mmc3: mmc@e033c000 {
 323                         compatible = "actions,owl-mmc";
 324                         reg = <0x0 0xe033c000 0x0 0x4000>;
 325                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 326                         clocks = <&cmu CLK_SD3>;
 327                         resets = <&cmu RESET_SD3>;
 328                         dmas = <&dma 46>;
 329                         dma-names = "mmc";
 330                         status = "disabled";
 331                 };
 332         };
 333 };