arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for NXP LS1088A QDS Board.
   4  *
   5  * Copyright 2017 NXP
   6  *
   7  * Harninder Rai <harninder.rai@nxp.com>
   8  *
   9  */
  10
  11 /dts-v1/;
  12
  13 #include "fsl-ls1088a.dtsi"
  14
  15 / {
  16         model = "LS1088A QDS Board";
  17         compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
  18 };
  19
  20 &dspi {
  21         bus-num = <0>;
  22         status = "okay";
  23
  24         flash@0 {
  25                 #address-cells = <1>;
  26                 #size-cells = <1>;
  27                 compatible = "jedec,spi-nor";
  28                 reg = <0>;
  29                 spi-max-frequency = <1000000>;
  30         };
  31
  32         flash@1 {
  33                 #address-cells = <1>;
  34                 #size-cells = <1>;
  35                 compatible = "jedec,spi-nor";
  36                 spi-cpol;
  37                 spi-cpha;
  38                 spi-max-frequency = <3500000>;
  39                 reg = <1>;
  40         };
  41
  42         flash@2 {
  43                 #address-cells = <1>;
  44                 #size-cells = <1>;
  45                 compatible = "jedec,spi-nor";
  46                 spi-cpol;
  47                 spi-cpha;
  48                 spi-max-frequency = <3500000>;
  49                 reg = <2>;
  50         };
  51 };
  52
  53 &i2c0 {
  54         status = "okay";
  55
  56         i2c-switch@77 {
  57                 compatible = "nxp,pca9547";
  58                 reg = <0x77>;
  59                 #address-cells = <1>;
  60                 #size-cells = <0>;
  61
  62                 i2c@2 {
  63                         #address-cells = <1>;
  64                         #size-cells = <0>;
  65                         reg = <0x2>;
  66
  67                         ina220@40 {
  68                                 compatible = "ti,ina220";
  69                                 reg = <0x40>;
  70                                 shunt-resistor = <1000>;
  71                         };
  72
  73                         ina220@41 {
  74                                 compatible = "ti,ina220";
  75                                 reg = <0x41>;
  76                                 shunt-resistor = <1000>;
  77                         };
  78                 };
  79
  80                 i2c@3 {
  81                         #address-cells = <1>;
  82                         #size-cells = <0>;
  83                         reg = <0x3>;
  84
  85                         temp-sensor@4c {
  86                                 compatible = "adi,adt7461a";
  87                                 reg = <0x4c>;
  88                         };
  89
  90                         rtc@51 {
  91                                 compatible = "nxp,pcf2129";
  92                                 reg = <0x51>;
  93                                 /* IRQ10_B */
  94                                 interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
  95                         };
  96
  97                         eeprom@56 {
  98                                 compatible = "atmel,24c512";
  99                                 reg = <0x56>;
 100                         };
 101
 102                         eeprom@57 {
 103                                 compatible = "atmel,24c512";
 104                                 reg = <0x57>;
 105                         };
 106                 };
 107         };
 108 };
 109
 110 &ifc {
 111         ranges = <0 0 0x5 0x80000000 0x08000000
 112                   2 0 0x5 0x30000000 0x00010000
 113                   3 0 0x5 0x20000000 0x00010000>;
 114         status = "okay";
 115
 116         nor@0,0 {
 117                 compatible = "cfi-flash";
 118                 reg = <0x0 0x0 0x8000000>;
 119                 bank-width = <2>;
 120                 device-width = <1>;
 121         };
 122
 123         nand@2,0 {
 124                 compatible = "fsl,ifc-nand";
 125                 reg = <0x2 0x0 0x10000>;
 126         };
 127
 128         fpga: board-control@3,0 {
 129                 compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
 130                 reg = <0x3 0x0 0x0000100>;
 131         };
 132 };
 133
 134 &duart0 {
 135         status = "okay";
 136 };
 137
 138 &duart1 {
 139         status = "okay";
 140 };
 141
 142 &esdhc {
 143         status = "okay";
 144 };
 145
 146 &sata {
 147         status = "okay";
 148 };