arch/arm64/boot/dts/qcom/pm8150.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
   4  * Copyright (c) 2019, Linaro Limited
   5  */
   6
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/interrupt-controller/irq.h>
   9 #include <dt-bindings/spmi/spmi.h>
  10 #include <dt-bindings/iio/qcom,spmi-vadc.h>
  11
  12 &spmi_bus {
  13         pm8150_0: pmic@0 {
  14                 compatible = "qcom,pm8150", "qcom,spmi-pmic";
  15                 reg = <0x0 SPMI_USID>;
  16                 #address-cells = <1>;
  17                 #size-cells = <0>;
  18
  19                 pon: power-on@800 {
  20                         compatible = "qcom,pm8916-pon";
  21                         reg = <0x0800>;
  22                         pwrkey {
  23                                 compatible = "qcom,pm8941-pwrkey";
  24                                 interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
  25                                 debounce = <15625>;
  26                                 bias-pull-up;
  27                                 linux,code = <KEY_POWER>;
  28
  29                                 status = "disabled";
  30                         };
  31                 };
  32
  33                 pm8150_adc: adc@3100 {
  34                         compatible = "qcom,spmi-adc5";
  35                         reg = <0x3100>;
  36                         #address-cells = <1>;
  37                         #size-cells = <0>;
  38                         #io-channel-cells = <1>;
  39                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
  40
  41                         status = "disabled";
  42
  43                         ref-gnd@0 {
  44                                 reg = <ADC5_REF_GND>;
  45                                 qcom,pre-scaling = <1 1>;
  46                                 label = "ref_gnd";
  47                         };
  48
  49                         vref-1p25@1 {
  50                                 reg = <ADC5_1P25VREF>;
  51                                 qcom,pre-scaling = <1 1>;
  52                                 label = "vref_1p25";
  53                         };
  54
  55                         die-temp@6 {
  56                                 reg = <ADC5_DIE_TEMP>;
  57                                 qcom,pre-scaling = <1 1>;
  58                                 label = "die_temp";
  59                         };
  60                 };
  61
  62                 rtc@6000 {
  63                         compatible = "qcom,pm8941-rtc";
  64                         reg = <0x6000>;
  65                         reg-names = "rtc", "alarm";
  66                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
  67
  68                         status = "disabled";
  69                 };
  70
  71                 pm8150_gpios: gpio@c000 {
  72                         compatible = "qcom,pm8150-gpio";
  73                         reg = <0xc000>;
  74                         gpio-controller;
  75                         #gpio-cells = <2>;
  76                         interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>,
  77                                      <0x0 0xc1 0x0 IRQ_TYPE_NONE>,
  78                                      <0x0 0xc2 0x0 IRQ_TYPE_NONE>,
  79                                      <0x0 0xc3 0x0 IRQ_TYPE_NONE>,
  80                                      <0x0 0xc4 0x0 IRQ_TYPE_NONE>,
  81                                      <0x0 0xc5 0x0 IRQ_TYPE_NONE>,
  82                                      <0x0 0xc6 0x0 IRQ_TYPE_NONE>,
  83                                      <0x0 0xc7 0x0 IRQ_TYPE_NONE>,
  84                                      <0x0 0xc8 0x0 IRQ_TYPE_NONE>,
  85                                      <0x0 0xc9 0x0 IRQ_TYPE_NONE>,
  86                                      <0x0 0xca 0x0 IRQ_TYPE_NONE>,
  87                                      <0x0 0xcb 0x0 IRQ_TYPE_NONE>;
  88                 };
  89         };
  90
  91         pmic@1 {
  92                 compatible = "qcom,pm8150", "qcom,spmi-pmic";
  93                 reg = <0x1 SPMI_USID>;
  94                 #address-cells = <1>;
  95                 #size-cells = <0>;
  96         };
  97 };