arch/m68k/include/asm/io_no.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 #ifndef _M68KNOMMU_IO_H
   3 #define _M68KNOMMU_IO_H
   4
   5 /*
   6  * Convert a physical memory address into a IO memory address.
   7  * For us this is trivially a type cast.
   8  */
   9 #define iomem(a)        ((void __iomem *) (a))
  10
  11 /*
  12  * The non-MMU m68k and ColdFire IO and memory mapped hardware access
  13  * functions have always worked in CPU native endian. We need to define
  14  * that behavior here first before we include asm-generic/io.h.
  15  */
  16 #define __raw_readb(addr) \
  17     ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
  18 #define __raw_readw(addr) \
  19     ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
  20 #define __raw_readl(addr) \
  21     ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
  22
  23 #define __raw_writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b))
  24 #define __raw_writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b))
  25 #define __raw_writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
  26
  27 #if defined(CONFIG_COLDFIRE)
  28 /*
  29  * For ColdFire platforms we may need to do some extra checks for what
  30  * type of address range we are accessing. Include the ColdFire platform
  31  * definitions so we can figure out if need to do something special.
  32  */
  33 #include <asm/byteorder.h>
  34 #include <asm/coldfire.h>
  35 #include <asm/mcfsim.h>
  36 #endif /* CONFIG_COLDFIRE */
  37
  38 #if defined(IOMEMBASE)
  39 /*
  40  * The ColdFire SoC internal peripherals are mapped into virtual address
  41  * space using the ACR registers of the cache control unit. This means we
  42  * are using a 1:1 physical:virtual mapping for them. We can quickly
  43  * determine if we are accessing an internal peripheral device given the
  44  * physical or vitrual address using the same range check. This check logic
  45  * applies just the same of there is no MMU but something like a PCI bus
  46  * is present.
  47  */
  48 static int __cf_internalio(unsigned long addr)
  49 {
  50         return (addr >= IOMEMBASE) && (addr <= IOMEMBASE + IOMEMSIZE - 1);
  51 }
  52
  53 static int cf_internalio(const volatile void __iomem *addr)
  54 {
  55         return __cf_internalio((unsigned long) addr);
  56 }
  57
  58 /*
  59  * We need to treat built-in peripherals and bus based address ranges
  60  * differently. Local built-in peripherals (and the ColdFire SoC parts
  61  * have quite a lot of them) are always native endian - which is big
  62  * endian on m68k/ColdFire. Bus based address ranges, like the PCI bus,
  63  * are accessed little endian - so we need to byte swap those.
  64  */
  65 #define readw readw
  66 static inline u16 readw(const volatile void __iomem *addr)
  67 {
  68         if (cf_internalio(addr))
  69                 return __raw_readw(addr);
  70         return __le16_to_cpu(__raw_readw(addr));
  71 }
  72
  73 #define readl readl
  74 static inline u32 readl(const volatile void __iomem *addr)
  75 {
  76         if (cf_internalio(addr))
  77                 return __raw_readl(addr);
  78         return __le32_to_cpu(__raw_readl(addr));
  79 }
  80
  81 #define writew writew
  82 static inline void writew(u16 value, volatile void __iomem *addr)
  83 {
  84         if (cf_internalio(addr))
  85                 __raw_writew(value, addr);
  86         else
  87                 __raw_writew(__cpu_to_le16(value), addr);
  88 }
  89
  90 #define writel writel
  91 static inline void writel(u32 value, volatile void __iomem *addr)
  92 {
  93         if (cf_internalio(addr))
  94                 __raw_writel(value, addr);
  95         else
  96                 __raw_writel(__cpu_to_le32(value), addr);
  97 }
  98
  99 #else
 100
 101 #define readb __raw_readb
 102 #define readw __raw_readw
 103 #define readl __raw_readl
 104 #define writeb __raw_writeb
 105 #define writew __raw_writew
 106 #define writel __raw_writel
 107
 108 #endif /* IOMEMBASE */
 109
 110 #if defined(CONFIG_PCI)
 111 /*
 112  * Support for PCI bus access uses the asm-generic access functions.
 113  * We need to supply the base address and masks for the normal memory
 114  * and IO address space mappings.
 115  */
 116 #define PCI_MEM_PA      0xf0000000              /* Host physical address */
 117 #define PCI_MEM_BA      0xf0000000              /* Bus physical address */
 118 #define PCI_MEM_SIZE    0x08000000              /* 128 MB */
 119 #define PCI_MEM_MASK    (PCI_MEM_SIZE - 1)
 120
 121 #define PCI_IO_PA       0xf8000000              /* Host physical address */
 122 #define PCI_IO_BA       0x00000000              /* Bus physical address */
 123 #define PCI_IO_SIZE     0x00010000              /* 64k */
 124 #define PCI_IO_MASK     (PCI_IO_SIZE - 1)
 125
 126 #define HAVE_ARCH_PIO_SIZE
 127 #define PIO_OFFSET      0
 128 #define PIO_MASK        0xffff
 129 #define PIO_RESERVED    0x10000
 130 #define PCI_IOBASE      ((void __iomem *) PCI_IO_PA)
 131 #define PCI_SPACE_LIMIT PCI_IO_MASK
 132 #endif /* CONFIG_PCI */
 133
 134 #include <asm/kmap.h>
 135 #include <asm/virtconvert.h>
 136
 137 #endif /* _M68KNOMMU_IO_H */