arch/mips/alchemy/devboards/db1000.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * DBAu1000/1500/1100 PBAu1100/1500 board support
   4  *
   5  * Copyright 2000, 2008 MontaVista Software Inc.
   6  * Author: MontaVista Software, Inc. <source@mvista.com>
   7  */
   8
   9 #include <linux/clk.h>
  10 #include <linux/dma-mapping.h>
  11 #include <linux/gpio.h>
  12 #include <linux/gpio/machine.h>
  13 #include <linux/init.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/leds.h>
  16 #include <linux/mmc/host.h>
  17 #include <linux/module.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/pm.h>
  20 #include <linux/spi/spi.h>
  21 #include <linux/spi/spi_gpio.h>
  22 #include <linux/spi/ads7846.h>
  23 #include <asm/mach-au1x00/au1000.h>
  24 #include <asm/mach-au1x00/gpio-au1000.h>
  25 #include <asm/mach-au1x00/au1000_dma.h>
  26 #include <asm/mach-au1x00/au1100_mmc.h>
  27 #include <asm/mach-db1x00/bcsr.h>
  28 #include <asm/reboot.h>
  29 #include <prom.h>
  30 #include "platform.h"
  31
  32 #define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
  33
  34 const char *get_system_type(void);
  35
  36 int __init db1000_board_setup(void)
  37 {
  38         /* initialize board register space */
  39         bcsr_init(DB1000_BCSR_PHYS_ADDR,
  40                   DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
  41
  42         switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
  43         case BCSR_WHOAMI_DB1000:
  44         case BCSR_WHOAMI_DB1500:
  45         case BCSR_WHOAMI_DB1100:
  46         case BCSR_WHOAMI_PB1500:
  47         case BCSR_WHOAMI_PB1500R2:
  48         case BCSR_WHOAMI_PB1100:
  49                 pr_info("AMD Alchemy %s Board\n", get_system_type());
  50                 return 0;
  51         }
  52         return -ENODEV;
  53 }
  54
  55 static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
  56 {
  57         if ((slot < 12) || (slot > 13) || pin == 0)
  58                 return -1;
  59         if (slot == 12)
  60                 return (pin == 1) ? AU1500_PCI_INTA : 0xff;
  61         if (slot == 13) {
  62                 switch (pin) {
  63                 case 1: return AU1500_PCI_INTA;
  64                 case 2: return AU1500_PCI_INTB;
  65                 case 3: return AU1500_PCI_INTC;
  66                 case 4: return AU1500_PCI_INTD;
  67                 }
  68         }
  69         return -1;
  70 }
  71
  72 static u64 au1xxx_all_dmamask = DMA_BIT_MASK(32);
  73
  74 static struct resource alchemy_pci_host_res[] = {
  75         [0] = {
  76                 .start  = AU1500_PCI_PHYS_ADDR,
  77                 .end    = AU1500_PCI_PHYS_ADDR + 0xfff,
  78                 .flags  = IORESOURCE_MEM,
  79         },
  80 };
  81
  82 static struct alchemy_pci_platdata db1500_pci_pd = {
  83         .board_map_irq  = db1500_map_pci_irq,
  84 };
  85
  86 static struct platform_device db1500_pci_host_dev = {
  87         .dev.platform_data = &db1500_pci_pd,
  88         .name           = "alchemy-pci",
  89         .id             = 0,
  90         .num_resources  = ARRAY_SIZE(alchemy_pci_host_res),
  91         .resource       = alchemy_pci_host_res,
  92 };
  93
  94 int __init db1500_pci_setup(void)
  95 {
  96         return platform_device_register(&db1500_pci_host_dev);
  97 }
  98
  99 static struct resource au1100_lcd_resources[] = {
 100         [0] = {
 101                 .start  = AU1100_LCD_PHYS_ADDR,
 102                 .end    = AU1100_LCD_PHYS_ADDR + 0x800 - 1,
 103                 .flags  = IORESOURCE_MEM,
 104         },
 105         [1] = {
 106                 .start  = AU1100_LCD_INT,
 107                 .end    = AU1100_LCD_INT,
 108                 .flags  = IORESOURCE_IRQ,
 109         }
 110 };
 111
 112 static struct platform_device au1100_lcd_device = {
 113         .name           = "au1100-lcd",
 114         .id             = 0,
 115         .dev = {
 116                 .dma_mask               = &au1xxx_all_dmamask,
 117                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 118         },
 119         .num_resources  = ARRAY_SIZE(au1100_lcd_resources),
 120         .resource       = au1100_lcd_resources,
 121 };
 122
 123 static struct resource alchemy_ac97c_res[] = {
 124         [0] = {
 125                 .start  = AU1000_AC97_PHYS_ADDR,
 126                 .end    = AU1000_AC97_PHYS_ADDR + 0xfff,
 127                 .flags  = IORESOURCE_MEM,
 128         },
 129         [1] = {
 130                 .start  = DMA_ID_AC97C_TX,
 131                 .end    = DMA_ID_AC97C_TX,
 132                 .flags  = IORESOURCE_DMA,
 133         },
 134         [2] = {
 135                 .start  = DMA_ID_AC97C_RX,
 136                 .end    = DMA_ID_AC97C_RX,
 137                 .flags  = IORESOURCE_DMA,
 138         },
 139 };
 140
 141 static struct platform_device alchemy_ac97c_dev = {
 142         .name           = "alchemy-ac97c",
 143         .id             = -1,
 144         .resource       = alchemy_ac97c_res,
 145         .num_resources  = ARRAY_SIZE(alchemy_ac97c_res),
 146 };
 147
 148 static struct platform_device alchemy_ac97c_dma_dev = {
 149         .name           = "alchemy-pcm-dma",
 150         .id             = 0,
 151 };
 152
 153 static struct platform_device db1x00_codec_dev = {
 154         .name           = "ac97-codec",
 155         .id             = -1,
 156 };
 157
 158 static struct platform_device db1x00_audio_dev = {
 159         .name           = "db1000-audio",
 160         .dev = {
 161                 .dma_mask               = &au1xxx_all_dmamask,
 162                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 163         },
 164 };
 165
 166 /******************************************************************************/
 167
 168 static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
 169 {
 170         void (*mmc_cd)(struct mmc_host *, unsigned long);
 171         /* link against CONFIG_MMC=m */
 172         mmc_cd = symbol_get(mmc_detect_change);
 173         mmc_cd(ptr, msecs_to_jiffies(500));
 174         symbol_put(mmc_detect_change);
 175
 176         return IRQ_HANDLED;
 177 }
 178
 179 static int db1100_mmc_cd_setup(void *mmc_host, int en)
 180 {
 181         int ret = 0, irq;
 182
 183         if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100)
 184                 irq = AU1100_GPIO19_INT;
 185         else
 186                 irq = AU1100_GPIO14_INT;        /* PB1100 SD0 CD# */
 187
 188         if (en) {
 189                 irq_set_irq_type(irq, IRQ_TYPE_EDGE_BOTH);
 190                 ret = request_irq(irq, db1100_mmc_cd, 0,
 191                                   "sd0_cd", mmc_host);
 192         } else
 193                 free_irq(irq, mmc_host);
 194         return ret;
 195 }
 196
 197 static int db1100_mmc1_cd_setup(void *mmc_host, int en)
 198 {
 199         int ret = 0, irq;
 200
 201         if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100)
 202                 irq = AU1100_GPIO20_INT;
 203         else
 204                 irq = AU1100_GPIO15_INT;        /* PB1100 SD1 CD# */
 205
 206         if (en) {
 207                 irq_set_irq_type(irq, IRQ_TYPE_EDGE_BOTH);
 208                 ret = request_irq(irq, db1100_mmc_cd, 0,
 209                                   "sd1_cd", mmc_host);
 210         } else
 211                 free_irq(irq, mmc_host);
 212         return ret;
 213 }
 214
 215 static int db1100_mmc_card_readonly(void *mmc_host)
 216 {
 217         /* testing suggests that this bit is inverted */
 218         return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 0 : 1;
 219 }
 220
 221 static int db1100_mmc_card_inserted(void *mmc_host)
 222 {
 223         return !alchemy_gpio_get_value(19);
 224 }
 225
 226 static void db1100_mmc_set_power(void *mmc_host, int state)
 227 {
 228         int bit;
 229
 230         if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100)
 231                 bit = BCSR_BOARD_SD0PWR;
 232         else
 233                 bit = BCSR_BOARD_PB1100_SD0PWR;
 234
 235         if (state) {
 236                 bcsr_mod(BCSR_BOARD, 0, bit);
 237                 msleep(400);    /* stabilization time */
 238         } else
 239                 bcsr_mod(BCSR_BOARD, bit, 0);
 240 }
 241
 242 static void db1100_mmcled_set(struct led_classdev *led, enum led_brightness b)
 243 {
 244         if (b != LED_OFF)
 245                 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
 246         else
 247                 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
 248 }
 249
 250 static struct led_classdev db1100_mmc_led = {
 251         .brightness_set = db1100_mmcled_set,
 252 };
 253
 254 static int db1100_mmc1_card_readonly(void *mmc_host)
 255 {
 256         return (bcsr_read(BCSR_BOARD) & BCSR_BOARD_SD1WP) ? 1 : 0;
 257 }
 258
 259 static int db1100_mmc1_card_inserted(void *mmc_host)
 260 {
 261         return !alchemy_gpio_get_value(20);
 262 }
 263
 264 static void db1100_mmc1_set_power(void *mmc_host, int state)
 265 {
 266         int bit;
 267
 268         if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100)
 269                 bit = BCSR_BOARD_SD1PWR;
 270         else
 271                 bit = BCSR_BOARD_PB1100_SD1PWR;
 272
 273         if (state) {
 274                 bcsr_mod(BCSR_BOARD, 0, bit);
 275                 msleep(400);    /* stabilization time */
 276         } else
 277                 bcsr_mod(BCSR_BOARD, bit, 0);
 278 }
 279
 280 static void db1100_mmc1led_set(struct led_classdev *led, enum led_brightness b)
 281 {
 282         if (b != LED_OFF)
 283                 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
 284         else
 285                 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
 286 }
 287
 288 static struct led_classdev db1100_mmc1_led = {
 289         .brightness_set = db1100_mmc1led_set,
 290 };
 291
 292 static struct au1xmmc_platform_data db1100_mmc_platdata[2] = {
 293         [0] = {
 294                 .cd_setup       = db1100_mmc_cd_setup,
 295                 .set_power      = db1100_mmc_set_power,
 296                 .card_inserted  = db1100_mmc_card_inserted,
 297                 .card_readonly  = db1100_mmc_card_readonly,
 298                 .led            = &db1100_mmc_led,
 299         },
 300         [1] = {
 301                 .cd_setup       = db1100_mmc1_cd_setup,
 302                 .set_power      = db1100_mmc1_set_power,
 303                 .card_inserted  = db1100_mmc1_card_inserted,
 304                 .card_readonly  = db1100_mmc1_card_readonly,
 305                 .led            = &db1100_mmc1_led,
 306         },
 307 };
 308
 309 static struct resource au1100_mmc0_resources[] = {
 310         [0] = {
 311                 .start  = AU1100_SD0_PHYS_ADDR,
 312                 .end    = AU1100_SD0_PHYS_ADDR + 0xfff,
 313                 .flags  = IORESOURCE_MEM,
 314         },
 315         [1] = {
 316                 .start  = AU1100_SD_INT,
 317                 .end    = AU1100_SD_INT,
 318                 .flags  = IORESOURCE_IRQ,
 319         },
 320         [2] = {
 321                 .start  = DMA_ID_SD0_TX,
 322                 .end    = DMA_ID_SD0_TX,
 323                 .flags  = IORESOURCE_DMA,
 324         },
 325         [3] = {
 326                 .start  = DMA_ID_SD0_RX,
 327                 .end    = DMA_ID_SD0_RX,
 328                 .flags  = IORESOURCE_DMA,
 329         }
 330 };
 331
 332 static struct platform_device db1100_mmc0_dev = {
 333         .name           = "au1xxx-mmc",
 334         .id             = 0,
 335         .dev = {
 336                 .dma_mask               = &au1xxx_all_dmamask,
 337                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 338                 .platform_data          = &db1100_mmc_platdata[0],
 339         },
 340         .num_resources  = ARRAY_SIZE(au1100_mmc0_resources),
 341         .resource       = au1100_mmc0_resources,
 342 };
 343
 344 static struct resource au1100_mmc1_res[] = {
 345         [0] = {
 346                 .start  = AU1100_SD1_PHYS_ADDR,
 347                 .end    = AU1100_SD1_PHYS_ADDR + 0xfff,
 348                 .flags  = IORESOURCE_MEM,
 349         },
 350         [1] = {
 351                 .start  = AU1100_SD_INT,
 352                 .end    = AU1100_SD_INT,
 353                 .flags  = IORESOURCE_IRQ,
 354         },
 355         [2] = {
 356                 .start  = DMA_ID_SD1_TX,
 357                 .end    = DMA_ID_SD1_TX,
 358                 .flags  = IORESOURCE_DMA,
 359         },
 360         [3] = {
 361                 .start  = DMA_ID_SD1_RX,
 362                 .end    = DMA_ID_SD1_RX,
 363                 .flags  = IORESOURCE_DMA,
 364         }
 365 };
 366
 367 static struct platform_device db1100_mmc1_dev = {
 368         .name           = "au1xxx-mmc",
 369         .id             = 1,
 370         .dev = {
 371                 .dma_mask               = &au1xxx_all_dmamask,
 372                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 373                 .platform_data          = &db1100_mmc_platdata[1],
 374         },
 375         .num_resources  = ARRAY_SIZE(au1100_mmc1_res),
 376         .resource       = au1100_mmc1_res,
 377 };
 378
 379 /******************************************************************************/
 380
 381 static struct ads7846_platform_data db1100_touch_pd = {
 382         .model          = 7846,
 383         .vref_mv        = 3300,
 384         .gpio_pendown   = 21,
 385 };
 386
 387 static struct spi_gpio_platform_data db1100_spictl_pd = {
 388         .num_chipselect = 1,
 389 };
 390
 391 static struct spi_board_info db1100_spi_info[] __initdata = {
 392         [0] = {
 393                 .modalias        = "ads7846",
 394                 .max_speed_hz    = 3250000,
 395                 .bus_num         = 0,
 396                 .chip_select     = 0,
 397                 .mode            = 0,
 398                 .irq             = AU1100_GPIO21_INT,
 399                 .platform_data   = &db1100_touch_pd,
 400         },
 401 };
 402
 403 static struct platform_device db1100_spi_dev = {
 404         .name           = "spi_gpio",
 405         .id             = 0,
 406         .dev            = {
 407                 .platform_data  = &db1100_spictl_pd,
 408                 .dma_mask               = &au1xxx_all_dmamask,
 409                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 410         },
 411 };
 412
 413 /*
 414  * Alchemy GPIO 2 has its base at 200 so the GPIO lines
 415  * 207 thru 210 are GPIOs at offset 7 thru 10 at this chip.
 416  */
 417 static struct gpiod_lookup_table db1100_spi_gpiod_table = {
 418         .dev_id         = "spi_gpio",
 419         .table          = {
 420                 GPIO_LOOKUP("alchemy-gpio2", 9,
 421                             "sck", GPIO_ACTIVE_HIGH),
 422                 GPIO_LOOKUP("alchemy-gpio2", 8,
 423                             "mosi", GPIO_ACTIVE_HIGH),
 424                 GPIO_LOOKUP("alchemy-gpio2", 7,
 425                             "miso", GPIO_ACTIVE_HIGH),
 426                 GPIO_LOOKUP("alchemy-gpio2", 10,
 427                             "cs", GPIO_ACTIVE_HIGH),
 428                 { },
 429         },
 430 };
 431
 432 static struct platform_device *db1x00_devs[] = {
 433         &db1x00_codec_dev,
 434         &alchemy_ac97c_dma_dev,
 435         &alchemy_ac97c_dev,
 436         &db1x00_audio_dev,
 437 };
 438
 439 static struct platform_device *db1100_devs[] = {
 440         &au1100_lcd_device,
 441         &db1100_mmc0_dev,
 442         &db1100_mmc1_dev,
 443 };
 444
 445 int __init db1000_dev_setup(void)
 446 {
 447         int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
 448         int c0, c1, d0, d1, s0, s1, flashsize = 32,  twosocks = 1;
 449         unsigned long pfc;
 450         struct clk *c, *p;
 451
 452         if (board == BCSR_WHOAMI_DB1500) {
 453                 c0 = AU1500_GPIO2_INT;
 454                 c1 = AU1500_GPIO5_INT;
 455                 d0 = 0; /* GPIO number, NOT irq! */
 456                 d1 = 3; /* GPIO number, NOT irq! */
 457                 s0 = AU1500_GPIO1_INT;
 458                 s1 = AU1500_GPIO4_INT;
 459         } else if (board == BCSR_WHOAMI_DB1100) {
 460                 c0 = AU1100_GPIO2_INT;
 461                 c1 = AU1100_GPIO5_INT;
 462                 d0 = 0; /* GPIO number, NOT irq! */
 463                 d1 = 3; /* GPIO number, NOT irq! */
 464                 s0 = AU1100_GPIO1_INT;
 465                 s1 = AU1100_GPIO4_INT;
 466
 467                 gpio_request(19, "sd0_cd");
 468                 gpio_request(20, "sd1_cd");
 469                 gpio_direction_input(19);       /* sd0 cd# */
 470                 gpio_direction_input(20);       /* sd1 cd# */
 471
 472                 /* spi_gpio on SSI0 pins */
 473                 pfc = alchemy_rdsys(AU1000_SYS_PINFUNC);
 474                 pfc |= (1 << 0);        /* SSI0 pins as GPIOs */
 475                 alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
 476
 477                 spi_register_board_info(db1100_spi_info,
 478                                         ARRAY_SIZE(db1100_spi_info));
 479
 480                 /* link LCD clock to AUXPLL */
 481                 p = clk_get(NULL, "auxpll_clk");
 482                 c = clk_get(NULL, "lcd_intclk");
 483                 if (!IS_ERR(c) && !IS_ERR(p)) {
 484                         clk_set_parent(c, p);
 485                         clk_set_rate(c, clk_get_rate(p));
 486                 }
 487                 if (!IS_ERR(c))
 488                         clk_put(c);
 489                 if (!IS_ERR(p))
 490                         clk_put(p);
 491
 492                 platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
 493                 gpiod_add_lookup_table(&db1100_spi_gpiod_table);
 494                 platform_device_register(&db1100_spi_dev);
 495         } else if (board == BCSR_WHOAMI_DB1000) {
 496                 c0 = AU1000_GPIO2_INT;
 497                 c1 = AU1000_GPIO5_INT;
 498                 d0 = 0; /* GPIO number, NOT irq! */
 499                 d1 = 3; /* GPIO number, NOT irq! */
 500                 s0 = AU1000_GPIO1_INT;
 501                 s1 = AU1000_GPIO4_INT;
 502         } else if ((board == BCSR_WHOAMI_PB1500) ||
 503                    (board == BCSR_WHOAMI_PB1500R2)) {
 504                 c0 = AU1500_GPIO203_INT;
 505                 d0 = 1; /* GPIO number, NOT irq! */
 506                 s0 = AU1500_GPIO202_INT;
 507                 twosocks = 0;
 508                 flashsize = 64;
 509                 /* RTC and daughtercard irqs */
 510                 irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_LOW);
 511                 irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
 512                 /* EPSON S1D13806 0x1b000000
 513                  * SRAM 1MB/2MB   0x1a000000
 514                  * DS1693 RTC     0x0c000000
 515                  */
 516         } else if (board == BCSR_WHOAMI_PB1100) {
 517                 c0 = AU1100_GPIO11_INT;
 518                 d0 = 9; /* GPIO number, NOT irq! */
 519                 s0 = AU1100_GPIO10_INT;
 520                 twosocks = 0;
 521                 flashsize = 64;
 522                 /* pendown, rtc, daughtercard irqs */
 523                 irq_set_irq_type(AU1100_GPIO8_INT, IRQ_TYPE_LEVEL_LOW);
 524                 irq_set_irq_type(AU1100_GPIO12_INT, IRQ_TYPE_LEVEL_LOW);
 525                 irq_set_irq_type(AU1100_GPIO13_INT, IRQ_TYPE_LEVEL_LOW);
 526                 /* EPSON S1D13806 0x1b000000
 527                  * SRAM 1MB/2MB   0x1a000000
 528                  * DiskOnChip     0x0d000000
 529                  * DS1693 RTC     0x0c000000
 530                  */
 531                 platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
 532         } else
 533                 return 0; /* unknown board, no further dev setup to do */
 534
 535         irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW);
 536         irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW);
 537
 538         db1x_register_pcmcia_socket(
 539                 AU1000_PCMCIA_ATTR_PHYS_ADDR,
 540                 AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
 541                 AU1000_PCMCIA_MEM_PHYS_ADDR,
 542                 AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
 543                 AU1000_PCMCIA_IO_PHYS_ADDR,
 544                 AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
 545                 c0, d0, /*s0*/0, 0, 0);
 546
 547         if (twosocks) {
 548                 irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW);
 549                 irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW);
 550
 551                 db1x_register_pcmcia_socket(
 552                         AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
 553                         AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
 554                         AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
 555                         AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
 556                         AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
 557                         AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
 558                         c1, d1, /*s1*/0, 0, 1);
 559         }
 560
 561         platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs));
 562         db1x_register_norflash(flashsize << 20, 4 /* 32bit */, F_SWAPPED);
 563         return 0;
 564 }