treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / arch / mips / boot / dts / netlogic / xlp_svp.dts
blob3bb0b2e08e4acd0f589d5e3bda9a0d6f7db0abd6
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * XLP3XX Device Tree Source for SVP boards
4  */
6 /dts-v1/;
7 / {
8         model = "netlogic,XLP-SVP";
9         compatible = "netlogic,xlp";
10         #address-cells = <2>;
11         #size-cells = <2>;
13         soc {
14                 #address-cells = <2>;
15                 #size-cells = <1>;
16                 compatible = "simple-bus";
17                 ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
18                           1 0  0 0x16000000  0x02000000>; // GBU chipselects
20                 serial0: serial@30000 {
21                         device_type = "serial";
22                         compatible = "ns16550";
23                         reg = <0 0x30100 0xa00>;
24                         reg-shift = <2>;
25                         reg-io-width = <4>;
26                         clock-frequency = <133333333>;
27                         interrupt-parent = <&pic>;
28                         interrupts = <17>;
29                 };
30                 serial1: serial@31000 {
31                         device_type = "serial";
32                         compatible = "ns16550";
33                         reg = <0 0x31100 0xa00>;
34                         reg-shift = <2>;
35                         reg-io-width = <4>;
36                         clock-frequency = <133333333>;
37                         interrupt-parent = <&pic>;
38                         interrupts = <18>;
39                 };
40                 i2c0: ocores@32000 {
41                         compatible = "opencores,i2c-ocores";
42                         #address-cells = <1>;
43                         #size-cells = <0>;
44                         reg = <0 0x32100 0xa00>;
45                         reg-shift = <2>;
46                         reg-io-width = <4>;
47                         clock-frequency = <32000000>;
48                         interrupt-parent = <&pic>;
49                         interrupts = <30>;
50                 };
51                 i2c1: ocores@33000 {
52                         compatible = "opencores,i2c-ocores";
53                         #address-cells = <1>;
54                         #size-cells = <0>;
55                         reg = <0 0x33100 0xa00>;
56                         reg-shift = <2>;
57                         reg-io-width = <4>;
58                         clock-frequency = <32000000>;
59                         interrupt-parent = <&pic>;
60                         interrupts = <31>;
62                         rtc@68 {
63                                 compatible = "dallas,ds1374";
64                                 reg = <0x68>;
65                         };
67                         dtt@4c {
68                                 compatible = "national,lm90";
69                                 reg = <0x4c>;
70                         };
71                 };
72                 pic: pic@4000 {
73                         compatible = "netlogic,xlp-pic";
74                         #address-cells = <0>;
75                         #interrupt-cells = <1>;
76                         reg = <0 0x4000 0x200>;
77                         interrupt-controller;
78                 };
80                 nor_flash@1,0 {
81                         compatible = "cfi-flash";
82                         #address-cells = <1>;
83                         #size-cells = <1>;
84                         bank-width = <2>;
85                         reg = <1 0 0x1000000>;
87                         partition@0 {
88                                 label = "x-loader";
89                                 reg = <0x0 0x100000>; /* 1M */
90                                 read-only;
91                         };
93                         partition@100000 {
94                                 label = "u-boot";
95                                 reg = <0x100000 0x100000>; /* 1M */
96                         };
98                         partition@200000 {
99                                 label = "kernel";
100                                 reg = <0x200000 0x500000>; /* 5M */
101                         };
103                         partition@700000 {
104                                 label = "rootfs";
105                                 reg = <0x700000 0x800000>; /* 8M */
106                         };
108                         partition@f00000 {
109                                 label = "env";
110                                 reg = <0xf00000 0x100000>; /* 1M */
111                                 read-only;
112                         };
113                 };
115                 gpio: xlp_gpio@34100 {
116                         compatible = "netlogic,xlp316-gpio";
117                         reg = <0 0x34100 0x1000>;
118                         #gpio-cells = <2>;
119                         gpio-controller;
121                         #interrupt-cells = <2>;
122                         interrupt-parent = <&pic>;
123                         interrupts = <39>;
124                         interrupt-controller;
125                 };
126         };
128         chosen {
129                 bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
130         };