treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / arch / mips / netlogic / xlp / wakeup.c
blobd61004dd71b4164844d3574fc936874245ed283c
1 /*
2 * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
3 * reserved.
5 * This software is available to you under a choice of one of two
6 * licenses. You may choose to be licensed under the terms of the GNU
7 * General Public License (GPL) Version 2, available from the file
8 * COPYING in the main directory of this source tree, or the NetLogic
9 * license below:
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions and the following disclaimer.
17 * 2. Redistributions in binary form must reproduce the above copyright
18 * notice, this list of conditions and the following disclaimer in
19 * the documentation and/or other materials provided with the
20 * distribution.
22 * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
23 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
24 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
29 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
30 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
31 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
32 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 #include <linux/kernel.h>
36 #include <linux/threads.h>
38 #include <asm/asm.h>
39 #include <asm/asm-offsets.h>
40 #include <asm/mipsregs.h>
41 #include <asm/addrspace.h>
42 #include <asm/string.h>
44 #include <asm/netlogic/haldefs.h>
45 #include <asm/netlogic/common.h>
46 #include <asm/netlogic/mips-extns.h>
48 #include <asm/netlogic/xlp-hal/iomap.h>
49 #include <asm/netlogic/xlp-hal/xlp.h>
50 #include <asm/netlogic/xlp-hal/pic.h>
51 #include <asm/netlogic/xlp-hal/sys.h>
53 static int xlp_wakeup_core(uint64_t sysbase, int node, int core)
55 uint32_t coremask, value;
56 int count, resetreg;
58 coremask = (1 << core);
60 /* Enable CPU clock in case of 8xx/3xx */
61 if (!cpu_is_xlpii()) {
62 value = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL);
63 value &= ~coremask;
64 nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value);
67 /* On 9XX, mark coherent first */
68 if (cpu_is_xlp9xx()) {
69 value = nlm_read_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE);
70 value &= ~coremask;
71 nlm_write_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE, value);
74 /* Remove CPU Reset */
75 resetreg = cpu_is_xlp9xx() ? SYS_9XX_CPU_RESET : SYS_CPU_RESET;
76 value = nlm_read_sys_reg(sysbase, resetreg);
77 value &= ~coremask;
78 nlm_write_sys_reg(sysbase, resetreg, value);
80 /* We are done on 9XX */
81 if (cpu_is_xlp9xx())
82 return 1;
84 /* Poll for CPU to mark itself coherent on other type of XLP */
85 count = 100000;
86 do {
87 value = nlm_read_sys_reg(sysbase, SYS_CPU_NONCOHERENT_MODE);
88 } while ((value & coremask) != 0 && --count > 0);
90 return count != 0;
93 static int wait_for_cpus(int cpu, int bootcpu)
95 volatile uint32_t *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
96 int i, count, notready;
98 count = 0x800000;
99 do {
100 notready = nlm_threads_per_core;
101 for (i = 0; i < nlm_threads_per_core; i++)
102 if (cpu_ready[cpu + i] || (cpu + i) == bootcpu)
103 --notready;
104 } while (notready != 0 && --count > 0);
106 return count != 0;
109 static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
111 struct nlm_soc_info *nodep;
112 uint64_t syspcibase, fusebase;
113 uint32_t syscoremask, mask, fusemask;
114 int core, n, cpu, ncores;
116 for (n = 0; n < NLM_NR_NODES; n++) {
117 if (n != 0) {
118 /* check if node exists and is online */
119 if (cpu_is_xlp9xx()) {
120 int b = xlp9xx_get_socbus(n);
121 pr_info("Node %d SoC PCI bus %d.\n", n, b);
122 if (b == 0)
123 break;
124 } else {
125 syspcibase = nlm_get_sys_pcibase(n);
126 if (nlm_read_reg(syspcibase, 0) == 0xffffffff)
127 break;
129 nlm_node_init(n);
132 /* read cores in reset from SYS */
133 nodep = nlm_get_node(n);
135 if (cpu_is_xlp9xx()) {
136 fusebase = nlm_get_fuse_regbase(n);
137 fusemask = nlm_read_reg(fusebase, FUSE_9XX_DEVCFG6);
138 switch (read_c0_prid() & PRID_IMP_MASK) {
139 case PRID_IMP_NETLOGIC_XLP5XX:
140 mask = 0xff;
141 break;
142 case PRID_IMP_NETLOGIC_XLP9XX:
143 default:
144 mask = 0xfffff;
145 break;
147 } else {
148 fusemask = nlm_read_sys_reg(nodep->sysbase,
149 SYS_EFUSE_DEVICE_CFG_STATUS0);
150 switch (read_c0_prid() & PRID_IMP_MASK) {
151 case PRID_IMP_NETLOGIC_XLP3XX:
152 mask = 0xf;
153 break;
154 case PRID_IMP_NETLOGIC_XLP2XX:
155 mask = 0x3;
156 break;
157 case PRID_IMP_NETLOGIC_XLP8XX:
158 default:
159 mask = 0xff;
160 break;
165 * Fused out cores are set in the fusemask, and the remaining
166 * cores are renumbered to range 0 .. nactive-1
168 syscoremask = (1 << hweight32(~fusemask & mask)) - 1;
170 pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask);
171 ncores = nlm_cores_per_node();
172 for (core = 0; core < ncores; core++) {
173 /* we will be on node 0 core 0 */
174 if (n == 0 && core == 0)
175 continue;
177 /* see if the core exists */
178 if ((syscoremask & (1 << core)) == 0)
179 continue;
181 /* see if at least the first hw thread is enabled */
182 cpu = (n * ncores + core) * NLM_THREADS_PER_CORE;
183 if (!cpumask_test_cpu(cpu, wakeup_mask))
184 continue;
186 /* wake up the core */
187 if (!xlp_wakeup_core(nodep->sysbase, n, core))
188 continue;
190 /* core is up */
191 nodep->coremask |= 1u << core;
193 /* spin until the hw threads sets their ready */
194 if (!wait_for_cpus(cpu, 0))
195 pr_err("Node %d : timeout core %d\n", n, core);
200 void xlp_wakeup_secondary_cpus(void)
203 * In case of u-boot, the secondaries are in reset
204 * first wakeup core 0 threads
206 xlp_boot_core0_siblings();
207 if (!wait_for_cpus(0, 0))
208 pr_err("Node 0 : timeout core 0\n");
210 /* now get other cores out of reset */
211 xlp_enable_secondary_cores(&nlm_cpumask);