treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / arch / mips / pci / pci-rt2880.c
blobe1f12e39813634ae8f9ecff13c0aff0cad1d6c82
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Ralink RT288x SoC PCI register definitions
5 * Copyright (C) 2009 John Crispin <john@phrozen.org>
6 * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
8 * Parts of this file are based on Ralink's 2.6.21 BSP
9 */
11 #include <linux/delay.h>
12 #include <linux/types.h>
13 #include <linux/pci.h>
14 #include <linux/io.h>
15 #include <linux/init.h>
16 #include <linux/of_platform.h>
17 #include <linux/of_irq.h>
18 #include <linux/of_pci.h>
20 #include <asm/mach-ralink/rt288x.h>
22 #define RT2880_PCI_BASE 0x00440000
23 #define RT288X_CPU_IRQ_PCI 4
25 #define RT2880_PCI_MEM_BASE 0x20000000
26 #define RT2880_PCI_MEM_SIZE 0x10000000
27 #define RT2880_PCI_IO_BASE 0x00460000
28 #define RT2880_PCI_IO_SIZE 0x00010000
30 #define RT2880_PCI_REG_PCICFG_ADDR 0x00
31 #define RT2880_PCI_REG_PCIMSK_ADDR 0x0c
32 #define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10
33 #define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18
34 #define RT2880_PCI_REG_CONFIG_ADDR 0x20
35 #define RT2880_PCI_REG_CONFIG_DATA 0x24
36 #define RT2880_PCI_REG_MEMBASE 0x28
37 #define RT2880_PCI_REG_IOBASE 0x2c
38 #define RT2880_PCI_REG_ID 0x30
39 #define RT2880_PCI_REG_CLASS 0x34
40 #define RT2880_PCI_REG_SUBID 0x38
41 #define RT2880_PCI_REG_ARBCTL 0x80
43 static void __iomem *rt2880_pci_base;
44 static DEFINE_SPINLOCK(rt2880_pci_lock);
46 static u32 rt2880_pci_reg_read(u32 reg)
48 return readl(rt2880_pci_base + reg);
51 static void rt2880_pci_reg_write(u32 val, u32 reg)
53 writel(val, rt2880_pci_base + reg);
56 static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
57 unsigned int func, unsigned int where)
59 return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
60 0x80000000);
63 static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn,
64 int where, int size, u32 *val)
66 unsigned long flags;
67 u32 address;
68 u32 data;
70 address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
71 PCI_FUNC(devfn), where);
73 spin_lock_irqsave(&rt2880_pci_lock, flags);
74 rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
75 data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
76 spin_unlock_irqrestore(&rt2880_pci_lock, flags);
78 switch (size) {
79 case 1:
80 *val = (data >> ((where & 3) << 3)) & 0xff;
81 break;
82 case 2:
83 *val = (data >> ((where & 3) << 3)) & 0xffff;
84 break;
85 case 4:
86 *val = data;
87 break;
90 return PCIBIOS_SUCCESSFUL;
93 static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn,
94 int where, int size, u32 val)
96 unsigned long flags;
97 u32 address;
98 u32 data;
100 address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
101 PCI_FUNC(devfn), where);
103 spin_lock_irqsave(&rt2880_pci_lock, flags);
104 rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
105 data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
107 switch (size) {
108 case 1:
109 data = (data & ~(0xff << ((where & 3) << 3))) |
110 (val << ((where & 3) << 3));
111 break;
112 case 2:
113 data = (data & ~(0xffff << ((where & 3) << 3))) |
114 (val << ((where & 3) << 3));
115 break;
116 case 4:
117 data = val;
118 break;
121 rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA);
122 spin_unlock_irqrestore(&rt2880_pci_lock, flags);
124 return PCIBIOS_SUCCESSFUL;
127 static struct pci_ops rt2880_pci_ops = {
128 .read = rt2880_pci_config_read,
129 .write = rt2880_pci_config_write,
132 static struct resource rt2880_pci_mem_resource = {
133 .name = "PCI MEM space",
134 .start = RT2880_PCI_MEM_BASE,
135 .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1,
136 .flags = IORESOURCE_MEM,
139 static struct resource rt2880_pci_io_resource = {
140 .name = "PCI IO space",
141 .start = RT2880_PCI_IO_BASE,
142 .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1,
143 .flags = IORESOURCE_IO,
146 static struct pci_controller rt2880_pci_controller = {
147 .pci_ops = &rt2880_pci_ops,
148 .mem_resource = &rt2880_pci_mem_resource,
149 .io_resource = &rt2880_pci_io_resource,
152 static inline u32 rt2880_pci_read_u32(unsigned long reg)
154 unsigned long flags;
155 u32 address;
156 u32 ret;
158 address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
160 spin_lock_irqsave(&rt2880_pci_lock, flags);
161 rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
162 ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
163 spin_unlock_irqrestore(&rt2880_pci_lock, flags);
165 return ret;
168 static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
170 unsigned long flags;
171 u32 address;
173 address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
175 spin_lock_irqsave(&rt2880_pci_lock, flags);
176 rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
177 rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA);
178 spin_unlock_irqrestore(&rt2880_pci_lock, flags);
181 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
183 u16 cmd;
184 int irq = -1;
186 if (dev->bus->number != 0)
187 return irq;
189 switch (PCI_SLOT(dev->devfn)) {
190 case 0x00:
191 rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
192 (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
193 break;
194 case 0x11:
195 irq = RT288X_CPU_IRQ_PCI;
196 break;
197 default:
198 pr_err("%s:%s[%d] trying to alloc unknown pci irq\n",
199 __FILE__, __func__, __LINE__);
200 BUG();
201 break;
204 pci_write_config_byte((struct pci_dev *) dev,
205 PCI_CACHE_LINE_SIZE, 0x14);
206 pci_write_config_byte((struct pci_dev *) dev, PCI_LATENCY_TIMER, 0xFF);
207 pci_read_config_word((struct pci_dev *) dev, PCI_COMMAND, &cmd);
208 cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
209 PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK |
210 PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY;
211 pci_write_config_word((struct pci_dev *) dev, PCI_COMMAND, cmd);
212 pci_write_config_byte((struct pci_dev *) dev, PCI_INTERRUPT_LINE,
213 dev->irq);
214 return irq;
217 static int rt288x_pci_probe(struct platform_device *pdev)
219 void __iomem *io_map_base;
221 rt2880_pci_base = ioremap(RT2880_PCI_BASE, PAGE_SIZE);
223 io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE);
224 rt2880_pci_controller.io_map_base = (unsigned long) io_map_base;
225 set_io_port_base((unsigned long) io_map_base);
227 ioport_resource.start = RT2880_PCI_IO_BASE;
228 ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
230 rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
231 udelay(1);
233 rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
234 rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
235 rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE);
236 rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE);
237 rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR);
238 rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID);
239 rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS);
240 rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID);
241 rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR);
243 rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
244 (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
246 rt2880_pci_controller.of_node = pdev->dev.of_node;
248 register_pci_controller(&rt2880_pci_controller);
249 return 0;
252 int pcibios_plat_dev_init(struct pci_dev *dev)
254 return 0;
257 static const struct of_device_id rt288x_pci_match[] = {
258 { .compatible = "ralink,rt288x-pci" },
262 static struct platform_driver rt288x_pci_driver = {
263 .probe = rt288x_pci_probe,
264 .driver = {
265 .name = "rt288x-pci",
266 .of_match_table = rt288x_pci_match,
270 int __init pcibios_init(void)
272 int ret = platform_driver_register(&rt288x_pci_driver);
274 if (ret)
275 pr_info("rt288x-pci: Error registering platform driver!");
277 return ret;
280 arch_initcall(pcibios_init);