treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / arch / powerpc / boot / dts / asp834x-redboot.dts
blob52a84561c4f076ac0c4fc7af3db12f2fda06521c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Analogue & Micro ASP8347 Device Tree Source
4  *
5  * Copyright 2008 Codehermit
6  */
8 /dts-v1/;
10 / {
11         model = "Analogue & Micro ASP8347E";
12         compatible = "analogue-and-micro,asp8347e";
13         #address-cells = <1>;
14         #size-cells = <1>;
16         aliases {
17                 ethernet0 = &enet0;
18                 ethernet1 = &enet1;
19                 serial0 = &serial0;
20                 serial1 = &serial1;
21         };
23         cpus {
24                 #address-cells = <1>;
25                 #size-cells = <0>;
27                 PowerPC,8347@0 {
28                         device_type = "cpu";
29                         reg = <0x0>;
30                         d-cache-line-size = <32>;
31                         i-cache-line-size = <32>;
32                         d-cache-size = <32768>;
33                         i-cache-size = <32768>;
34                         timebase-frequency = <0>;       // from bootloader
35                         bus-frequency = <0>;            // from bootloader
36                         clock-frequency = <0>;          // from bootloader
37                 };
38         };
40         memory {
41                 device_type = "memory";
42                 reg = <0x00000000 0x8000000>;   // 128MB at 0
43         };
45         localbus@ff005000 {
46                 #address-cells = <2>;
47                 #size-cells = <1>;
48                 compatible = "fsl,mpc8347e-localbus",
49                              "fsl,pq2pro-localbus",
50                              "simple-bus";
51                 reg = <0xff005000 0x1000>;
52                 interrupts = <77 0x8>;
53                 interrupt-parent = <&ipic>;
55                 ranges = <
56                         0 0 0xf0000000 0x02000000
57                 >;
59                 flash@0,0 {
60                         compatible = "cfi-flash";
61                         reg = <0 0 0x02000000>;
62                         bank-width = <2>;
63                         device-width = <2>;
64                 };
65         };
67         soc8349@ff000000 {
68                 #address-cells = <1>;
69                 #size-cells = <1>;
70                 device_type = "soc";
71                 ranges = <0x0 0xff000000 0x00100000>;
72                 reg = <0xff000000 0x00000200>;
73                 bus-frequency = <0>;
75                 wdt@200 {
76                         device_type = "watchdog";
77                         compatible = "mpc83xx_wdt";
78                         reg = <0x200 0x100>;
79                 };
81                 i2c@3000 {
82                         #address-cells = <1>;
83                         #size-cells = <0>;
84                         cell-index = <0>;
85                         compatible = "fsl-i2c";
86                         reg = <0x3000 0x100>;
87                         interrupts = <14 0x8>;
88                         interrupt-parent = <&ipic>;
89                         dfsrr;
91                         rtc@68 {
92                                 compatible = "dallas,ds1374";
93                                 reg = <0x68>;
94                         };
95                 };
97                 i2c@3100 {
98                         #address-cells = <1>;
99                         #size-cells = <0>;
100                         cell-index = <1>;
101                         compatible = "fsl-i2c";
102                         reg = <0x3100 0x100>;
103                         interrupts = <15 0x8>;
104                         interrupt-parent = <&ipic>;
105                         dfsrr;
106                 };
108                 spi@7000 {
109                         cell-index = <0>;
110                         compatible = "fsl,spi";
111                         reg = <0x7000 0x1000>;
112                         interrupts = <16 0x8>;
113                         interrupt-parent = <&ipic>;
114                         mode = "cpu";
115                 };
117                 dma@82a8 {
118                         #address-cells = <1>;
119                         #size-cells = <1>;
120                         compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
121                         reg = <0x82a8 4>;
122                         ranges = <0 0x8100 0x1a8>;
123                         interrupt-parent = <&ipic>;
124                         interrupts = <71 8>;
125                         cell-index = <0>;
126                         dma-channel@0 {
127                                 compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
128                                 reg = <0 0x80>;
129                                 cell-index = <0>;
130                                 interrupt-parent = <&ipic>;
131                                 interrupts = <71 8>;
132                         };
133                         dma-channel@80 {
134                                 compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
135                                 reg = <0x80 0x80>;
136                                 cell-index = <1>;
137                                 interrupt-parent = <&ipic>;
138                                 interrupts = <71 8>;
139                         };
140                         dma-channel@100 {
141                                 compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
142                                 reg = <0x100 0x80>;
143                                 cell-index = <2>;
144                                 interrupt-parent = <&ipic>;
145                                 interrupts = <71 8>;
146                         };
147                         dma-channel@180 {
148                                 compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
149                                 reg = <0x180 0x28>;
150                                 cell-index = <3>;
151                                 interrupt-parent = <&ipic>;
152                                 interrupts = <71 8>;
153                         };
154                 };
156                 /* phy type (ULPI or SERIAL) are only types supported for MPH */
157                 /* port = 0 or 1 */
158                 usb@22000 {
159                         compatible = "fsl-usb2-mph";
160                         reg = <0x22000 0x1000>;
161                         #address-cells = <1>;
162                         #size-cells = <0>;
163                         interrupt-parent = <&ipic>;
164                         interrupts = <39 0x8>;
165                         phy_type = "ulpi";
166                         port0;
167                 };
168                 /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
169                 usb@23000 {
170                         compatible = "fsl-usb2-dr";
171                         reg = <0x23000 0x1000>;
172                         #address-cells = <1>;
173                         #size-cells = <0>;
174                         interrupt-parent = <&ipic>;
175                         interrupts = <38 0x8>;
176                         dr_mode = "otg";
177                         phy_type = "ulpi";
178                 };
180                 enet0: ethernet@24000 {
181                         #address-cells = <1>;
182                         #size-cells = <1>;
183                         cell-index = <0>;
184                         device_type = "network";
185                         model = "TSEC";
186                         compatible = "gianfar";
187                         reg = <0x24000 0x1000>;
188                         ranges = <0x0 0x24000 0x1000>;
189                         local-mac-address = [ 00 08 e5 11 32 33 ];
190                         interrupts = <32 0x8 33 0x8 34 0x8>;
191                         interrupt-parent = <&ipic>;
192                         tbi-handle = <&tbi0>;
193                         phy-handle = <&phy0>;
194                         linux,network-index = <0>;
196                         mdio@520 {
197                                 #address-cells = <1>;
198                                 #size-cells = <0>;
199                                 compatible = "fsl,gianfar-mdio";
200                                 reg = <0x520 0x20>;
202                                 phy0: ethernet-phy@0 {
203                                         interrupt-parent = <&ipic>;
204                                         interrupts = <17 0x8>;
205                                         reg = <0x1>;
206                                 };
208                                 phy1: ethernet-phy@1 {
209                                         interrupt-parent = <&ipic>;
210                                         interrupts = <18 0x8>;
211                                         reg = <0x2>;
212                                 };
214                                 tbi0: tbi-phy@11 {
215                                         reg = <0x11>;
216                                         device_type = "tbi-phy";
217                                 };
218                         };
219                 };
221                 enet1: ethernet@25000 {
222                         #address-cells = <1>;
223                         #size-cells = <1>;
224                         cell-index = <1>;
225                         device_type = "network";
226                         model = "TSEC";
227                         compatible = "gianfar";
228                         reg = <0x25000 0x1000>;
229                         ranges = <0x0 0x25000 0x1000>;
230                         local-mac-address = [ 00 08 e5 11 32 34 ];
231                         interrupts = <35 0x8 36 0x8 37 0x8>;
232                         interrupt-parent = <&ipic>;
233                         tbi-handle = <&tbi1>;
234                         phy-handle = <&phy1>;
235                         linux,network-index = <1>;
237                         mdio@520 {
238                                 #address-cells = <1>;
239                                 #size-cells = <0>;
240                                 compatible = "fsl,gianfar-tbi";
241                                 reg = <0x520 0x20>;
243                                 tbi1: tbi-phy@11 {
244                                         reg = <0x11>;
245                                         device_type = "tbi-phy";
246                                 };
247                         };
248                 };
250                 serial0: serial@4500 {
251                         cell-index = <0>;
252                         device_type = "serial";
253                         compatible = "fsl,ns16550", "ns16550";
254                         reg = <0x4500 0x100>;
255                         clock-frequency = <400000000>;
256                         interrupts = <9 0x8>;
257                         interrupt-parent = <&ipic>;
258                 };
260                 serial1: serial@4600 {
261                         cell-index = <1>;
262                         device_type = "serial";
263                         compatible = "fsl,ns16550", "ns16550";
264                         reg = <0x4600 0x100>;
265                         clock-frequency = <400000000>;
266                         interrupts = <10 0x8>;
267                         interrupt-parent = <&ipic>;
268                 };
270                 /* May need to remove if on a part without crypto engine */
271                 crypto@30000 {
272                         device_type = "crypto";
273                         model = "SEC2";
274                         compatible = "talitos";
275                         reg = <0x30000 0x10000>;
276                         interrupts = <11 0x8>;
277                         interrupt-parent = <&ipic>;
278                         num-channels = <4>;
279                         channel-fifo-len = <24>;
280                         exec-units-mask = <0x0000007e>;
281                         /* desc mask is for rev2.0,
282                          * we need runtime fixup for >2.0 */
283                         descriptor-types-mask = <0x01010ebf>;
284                 };
286                 /* IPIC
287                  * interrupts cell = <intr #, sense>
288                  * sense values match linux IORESOURCE_IRQ_* defines:
289                  * sense == 8: Level, low assertion
290                  * sense == 2: Edge, high-to-low change
291                  */
292                 ipic: pic@700 {
293                         interrupt-controller;
294                         #address-cells = <0>;
295                         #interrupt-cells = <2>;
296                         reg = <0x700 0x100>;
297                         device_type = "ipic";
298                 };
299         };
301         chosen {
302                 bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2";
303                 stdout-path = &serial0;
304         };