arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi

   1 /*
   2  * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges)
   3  *
   4  * Copyright 2012 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 &board_lbc {
  36         nor@0,0 {
  37                 #address-cells = <1>;
  38                 #size-cells = <1>;
  39                 compatible = "cfi-flash";
  40                 reg = <0x0 0x0 0x01000000>;
  41                 bank-width = <2>;
  42                 device-width = <2>;
  43
  44                 partition@0 {
  45                         reg = <0x0 0x0b00000>;
  46                         label = "ramdisk-nor";
  47                 };
  48
  49                 partition@300000 {
  50                         reg = <0x0b00000 0x0400000>;
  51                         label = "kernel-nor";
  52                 };
  53
  54                 partition@700000 {
  55                         reg = <0x0f00000 0x060000>;
  56                         label = "dtb-nor";
  57                 };
  58
  59                 partition@760000 {
  60                         reg = <0x0f60000 0x020000>;
  61                         label = "env-nor";
  62                         read-only;
  63                 };
  64
  65                 partition@780000 {
  66                         reg = <0x0f80000 0x080000>;
  67                         label = "u-boot-nor";
  68                         read-only;
  69                 };
  70         };
  71
  72         board-control@1,0 {
  73                 compatible = "fsl,mpc8548cds-fpga";
  74                 reg = <0x1 0x0 0x1000>;
  75         };
  76 };
  77
  78 &board_soc {
  79         i2c@3000 {
  80                 eeprom@50 {
  81                         compatible = "atmel,24c64";
  82                         reg = <0x50>;
  83                 };
  84
  85                 eeprom@56 {
  86                         compatible = "atmel,24c64";
  87                         reg = <0x56>;
  88                 };
  89
  90                 eeprom@57 {
  91                         compatible = "atmel,24c64";
  92                         reg = <0x57>;
  93                 };
  94         };
  95
  96         i2c@3100 {
  97                 eeprom@50 {
  98                         compatible = "atmel,24c64";
  99                         reg = <0x50>;
 100                 };
 101         };
 102
 103         enet0: ethernet@24000 {
 104                 tbi-handle = <&tbi0>;
 105                 phy-handle = <&phy0>;
 106         };
 107
 108         mdio@24520 {
 109                 phy0: ethernet-phy@0 {
 110                         interrupts = <5 1 0 0>;
 111                         reg = <0x0>;
 112                 };
 113                 phy1: ethernet-phy@1 {
 114                         interrupts = <5 1 0 0>;
 115                         reg = <0x1>;
 116                 };
 117                 phy2: ethernet-phy@2 {
 118                         interrupts = <5 1 0 0>;
 119                         reg = <0x2>;
 120                 };
 121                 phy3: ethernet-phy@3 {
 122                         interrupts = <5 1 0 0>;
 123                         reg = <0x3>;
 124                 };
 125                 tbi0: tbi-phy@11 {
 126                         reg = <0x11>;
 127                         device_type = "tbi-phy";
 128                 };
 129         };
 130
 131         enet1: ethernet@25000 {
 132                 tbi-handle = <&tbi1>;
 133                 phy-handle = <&phy1>;
 134         };
 135
 136         mdio@25520 {
 137                 tbi1: tbi-phy@11 {
 138                         reg = <0x11>;
 139                         device_type = "tbi-phy";
 140                 };
 141         };
 142
 143         enet2: ethernet@26000 {
 144                 tbi-handle = <&tbi2>;
 145                 phy-handle = <&phy2>;
 146         };
 147
 148         mdio@26520 {
 149                 tbi2: tbi-phy@11 {
 150                         reg = <0x11>;
 151                         device_type = "tbi-phy";
 152                 };
 153         };
 154
 155         enet3: ethernet@27000 {
 156                 tbi-handle = <&tbi3>;
 157                 phy-handle = <&phy3>;
 158         };
 159
 160         mdio@27520 {
 161                 tbi3: tbi-phy@11 {
 162                         reg = <0x11>;
 163                         device_type = "tbi-phy";
 164                 };
 165         };
 166 };
 167
 168 &board_pci0 {
 169         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 170         interrupt-map = <
 171                 /* IDSEL 0x4 (PCIX Slot 2) */
 172                 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
 173                 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
 174                 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
 175                 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 176
 177                 /* IDSEL 0x5 (PCIX Slot 3) */
 178                 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
 179                 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
 180                 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
 181                 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
 182
 183                 /* IDSEL 0x6 (PCIX Slot 4) */
 184                 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
 185                 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
 186                 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
 187                 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
 188
 189                 /* IDSEL 0x8 (PCIX Slot 5) */
 190                 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
 191                 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
 192                 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
 193                 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 194
 195                 /* IDSEL 0xC (Tsi310 bridge) */
 196                 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
 197                 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
 198                 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
 199                 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 200
 201                 /* IDSEL 0x14 (Slot 2) */
 202                 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
 203                 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
 204                 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
 205                 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 206
 207                 /* IDSEL 0x15 (Slot 3) */
 208                 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
 209                 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
 210                 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
 211                 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
 212
 213                 /* IDSEL 0x16 (Slot 4) */
 214                 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
 215                 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
 216                 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
 217                 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
 218
 219                 /* IDSEL 0x18 (Slot 5) */
 220                 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
 221                 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
 222                 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
 223                 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 224
 225                 /* IDSEL 0x1C (Tsi310 bridge PCI primary) */
 226                 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
 227                 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
 228                 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
 229                 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
 230
 231         pci_bridge@1c {
 232                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 233                 interrupt-map = <
 234
 235                         /* IDSEL 0x00 (PrPMC Site) */
 236                         0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
 237                         0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
 238                         0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
 239                         0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 240
 241                         /* IDSEL 0x04 (VIA chip) */
 242                         0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
 243                         0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
 244                         0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
 245                         0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
 246
 247                         /* IDSEL 0x05 (8139) */
 248                         0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
 249
 250                         /* IDSEL 0x06 (Slot 6) */
 251                         0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
 252                         0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
 253                         0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
 254                         0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
 255
 256                         /* IDESL 0x07 (Slot 7) */
 257                         0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
 258                         0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
 259                         0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
 260                         0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
 261
 262                 reg = <0xe000 0x0 0x0 0x0 0x0>;
 263                 #interrupt-cells = <1>;
 264                 #size-cells = <2>;
 265                 #address-cells = <3>;
 266                 ranges = <0x2000000 0x0 0x80000000
 267                           0x2000000 0x0 0x80000000
 268                           0x0 0x20000000
 269                           0x1000000 0x0 0x0
 270                           0x1000000 0x0 0x0
 271                           0x0 0x80000>;
 272                 clock-frequency = <33333333>;
 273
 274                 isa@4 {
 275                         device_type = "isa";
 276                         #interrupt-cells = <2>;
 277                         #size-cells = <1>;
 278                         #address-cells = <2>;
 279                         reg = <0x2000 0x0 0x0 0x0 0x0>;
 280                         ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
 281                         interrupt-parent = <&i8259>;
 282
 283                         i8259: interrupt-controller@20 {
 284                                 interrupt-controller;
 285                                 device_type = "interrupt-controller";
 286                                 reg = <0x1 0x20 0x2
 287                                        0x1 0xa0 0x2
 288                                        0x1 0x4d0 0x2>;
 289                                 #address-cells = <0>;
 290                                 #interrupt-cells = <2>;
 291                                 compatible = "chrp,iic";
 292                                 interrupts = <0 1 0 0>;
 293                                 interrupt-parent = <&mpic>;
 294                         };
 295
 296                         rtc@70 {
 297                                 compatible = "pnpPNP,b00";
 298                                 reg = <0x1 0x70 0x2>;
 299                         };
 300                 };
 301         };
 302 };