treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / arch / powerpc / boot / dts / fsl / p3041si-post.dtsi
blob81bc75aca2e06b34920967207f4760cd389e2fc6
1 /*
2  * P3041 Silicon/SoC Device Tree Source (post include)
3  *
4  * Copyright 2011 - 2015 Freescale Semiconductor Inc.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are met:
8  *     * Redistributions of source code must retain the above copyright
9  *       notice, this list of conditions and the following disclaimer.
10  *     * Redistributions in binary form must reproduce the above copyright
11  *       notice, this list of conditions and the following disclaimer in the
12  *       documentation and/or other materials provided with the distribution.
13  *     * Neither the name of Freescale Semiconductor nor the
14  *       names of its contributors may be used to endorse or promote products
15  *       derived from this software without specific prior written permission.
16  *
17  *
18  * ALTERNATIVELY, this software may be distributed under the terms of the
19  * GNU General Public License ("GPL") as published by the Free Software
20  * Foundation, either version 2 of that License or (at your option) any
21  * later version.
22  *
23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33  */
35 &bman_fbpr {
36         compatible = "fsl,bman-fbpr";
37         alloc-ranges = <0 0 0x10 0>;
40 &qman_fqd {
41         compatible = "fsl,qman-fqd";
42         alloc-ranges = <0 0 0x10 0>;
45 &qman_pfdr {
46         compatible = "fsl,qman-pfdr";
47         alloc-ranges = <0 0 0x10 0>;
50 &lbc {
51         compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
52         interrupts = <25 2 0 0>;
53         #address-cells = <2>;
54         #size-cells = <1>;
57 /* controller at 0x200000 */
58 &pci0 {
59         compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
60         device_type = "pci";
61         #size-cells = <2>;
62         #address-cells = <3>;
63         bus-range = <0x0 0xff>;
64         clock-frequency = <33333333>;
65         interrupts = <16 2 1 15>;
66         fsl,iommu-parent = <&pamu0>;
67         fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
68         pcie@0 {
69                 reg = <0 0 0 0 0>;
70                 #interrupt-cells = <1>;
71                 #size-cells = <2>;
72                 #address-cells = <3>;
73                 device_type = "pci";
74                 interrupts = <16 2 1 15>;
75                 interrupt-map-mask = <0xf800 0 0 7>;
76                 interrupt-map = <
77                         /* IDSEL 0x0 */
78                         0000 0 0 1 &mpic 40 1 0 0
79                         0000 0 0 2 &mpic 1 1 0 0
80                         0000 0 0 3 &mpic 2 1 0 0
81                         0000 0 0 4 &mpic 3 1 0 0
82                         >;
83         };
86 /* controller at 0x201000 */
87 &pci1 {
88         compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
89         device_type = "pci";
90         #size-cells = <2>;
91         #address-cells = <3>;
92         bus-range = <0 0xff>;
93         clock-frequency = <33333333>;
94         interrupts = <16 2 1 14>;
95         fsl,iommu-parent = <&pamu0>;
96         fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
97         pcie@0 {
98                 reg = <0 0 0 0 0>;
99                 #interrupt-cells = <1>;
100                 #size-cells = <2>;
101                 #address-cells = <3>;
102                 device_type = "pci";
103                 interrupts = <16 2 1 14>;
104                 interrupt-map-mask = <0xf800 0 0 7>;
105                 interrupt-map = <
106                         /* IDSEL 0x0 */
107                         0000 0 0 1 &mpic 41 1 0 0
108                         0000 0 0 2 &mpic 5 1 0 0
109                         0000 0 0 3 &mpic 6 1 0 0
110                         0000 0 0 4 &mpic 7 1 0 0
111                         >;
112         };
115 /* controller at 0x202000 */
116 &pci2 {
117         compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
118         device_type = "pci";
119         #size-cells = <2>;
120         #address-cells = <3>;
121         bus-range = <0x0 0xff>;
122         clock-frequency = <33333333>;
123         interrupts = <16 2 1 13>;
124         fsl,iommu-parent = <&pamu0>;
125         fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
126         pcie@0 {
127                 reg = <0 0 0 0 0>;
128                 #interrupt-cells = <1>;
129                 #size-cells = <2>;
130                 #address-cells = <3>;
131                 device_type = "pci";
132                 interrupts = <16 2 1 13>;
133                 interrupt-map-mask = <0xf800 0 0 7>;
134                 interrupt-map = <
135                         /* IDSEL 0x0 */
136                         0000 0 0 1 &mpic 42 1 0 0
137                         0000 0 0 2 &mpic 9 1 0 0
138                         0000 0 0 3 &mpic 10 1 0 0
139                         0000 0 0 4 &mpic 11 1 0 0
140                         >;
141         };
144 /* controller at 0x203000 */
145 &pci3 {
146         compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
147         device_type = "pci";
148         #size-cells = <2>;
149         #address-cells = <3>;
150         bus-range = <0x0 0xff>;
151         clock-frequency = <33333333>;
152         interrupts = <16 2 1 12>;
153         pcie@0 {
154                 reg = <0 0 0 0 0>;
155                 #interrupt-cells = <1>;
156                 #size-cells = <2>;
157                 #address-cells = <3>;
158                 device_type = "pci";
159                 interrupts = <16 2 1 12>;
160                 interrupt-map-mask = <0xf800 0 0 7>;
161                 interrupt-map = <
162                         /* IDSEL 0x0 */
163                         0000 0 0 1 &mpic 43 1 0 0
164                         0000 0 0 2 &mpic 0 1 0 0
165                         0000 0 0 3 &mpic 4 1 0 0
166                         0000 0 0 4 &mpic 8 1 0 0
167                         >;
168         };
171 &rio {
172         compatible = "fsl,srio";
173         interrupts = <16 2 1 11>;
174         #address-cells = <2>;
175         #size-cells = <2>;
176         fsl,iommu-parent = <&pamu0>;
177         ranges;
179         port1 {
180                 #address-cells = <2>;
181                 #size-cells = <2>;
182                 cell-index = <1>;
183                 fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
184         };
186         port2 {
187                 #address-cells = <2>;
188                 #size-cells = <2>;
189                 cell-index = <2>;
190                 fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
191         };
194 &dcsr {
195         #address-cells = <1>;
196         #size-cells = <1>;
197         compatible = "fsl,dcsr", "simple-bus";
199         dcsr-epu@0 {
200                 compatible = "fsl,p3041-dcsr-epu", "fsl,dcsr-epu";
201                 interrupts = <52 2 0 0
202                               84 2 0 0
203                               85 2 0 0>;
204                 reg = <0x0 0x1000>;
205         };
206         dcsr-npc {
207                 compatible = "fsl,dcsr-npc";
208                 reg = <0x1000 0x1000 0x1000000 0x8000>;
209         };
210         dcsr-nxc@2000 {
211                 compatible = "fsl,dcsr-nxc";
212                 reg = <0x2000 0x1000>;
213         };
214         dcsr-corenet {
215                 compatible = "fsl,dcsr-corenet";
216                 reg = <0x8000 0x1000 0xB0000 0x1000>;
217         };
218         dcsr-dpaa@9000 {
219                 compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
220                 reg = <0x9000 0x1000>;
221         };
222         dcsr-ocn@11000 {
223                 compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
224                 reg = <0x11000 0x1000>;
225         };
226         dcsr-ddr@12000 {
227                 compatible = "fsl,dcsr-ddr";
228                 dev-handle = <&ddr1>;
229                 reg = <0x12000 0x1000>;
230         };
231         dcsr-nal@18000 {
232                 compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
233                 reg = <0x18000 0x1000>;
234         };
235         dcsr-rcpm@22000 {
236                 compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
237                 reg = <0x22000 0x1000>;
238         };
239         dcsr-cpu-sb-proxy@40000 {
240                 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
241                 cpu-handle = <&cpu0>;
242                 reg = <0x40000 0x1000>;
243         };
244         dcsr-cpu-sb-proxy@41000 {
245                 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
246                 cpu-handle = <&cpu1>;
247                 reg = <0x41000 0x1000>;
248         };
249         dcsr-cpu-sb-proxy@42000 {
250                 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
251                 cpu-handle = <&cpu2>;
252                 reg = <0x42000 0x1000>;
253         };
254         dcsr-cpu-sb-proxy@43000 {
255                 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
256                 cpu-handle = <&cpu3>;
257                 reg = <0x43000 0x1000>;
258         };
261 /include/ "qoriq-bman1-portals.dtsi"
263 /include/ "qoriq-qman1-portals.dtsi"
265 &soc {
266         #address-cells = <1>;
267         #size-cells = <1>;
268         device_type = "soc";
269         compatible = "simple-bus";
271         soc-sram-error {
272                 compatible = "fsl,soc-sram-error";
273                 interrupts = <16 2 1 29>;
274         };
276         corenet-law@0 {
277                 compatible = "fsl,corenet-law";
278                 reg = <0x0 0x1000>;
279                 fsl,num-laws = <32>;
280         };
282         ddr1: memory-controller@8000 {
283                 compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
284                 reg = <0x8000 0x1000>;
285                 interrupts = <16 2 1 23>;
286         };
288         cpc: l3-cache-controller@10000 {
289                 compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
290                 reg = <0x10000 0x1000>;
291                 interrupts = <16 2 1 27>;
292         };
294         corenet-cf@18000 {
295                 compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
296                 reg = <0x18000 0x1000>;
297                 interrupts = <16 2 1 31>;
298                 fsl,ccf-num-csdids = <32>;
299                 fsl,ccf-num-snoopids = <32>;
300         };
302         iommu@20000 {
303                 compatible = "fsl,pamu-v1.0", "fsl,pamu";
304                 reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
305                 ranges = <0 0x20000 0x4000>;
306                 #address-cells = <1>;
307                 #size-cells = <1>;
308                 interrupts = <
309                         24 2 0 0
310                         16 2 1 30>;
311                 fsl,portid-mapping = <0x0f000000>;
313                 pamu0: pamu@0 {
314                         reg = <0 0x1000>;
315                         fsl,primary-cache-geometry = <32 1>;
316                         fsl,secondary-cache-geometry = <128 2>;
317                 };
319                 pamu1: pamu@1000 {
320                         reg = <0x1000 0x1000>;
321                         fsl,primary-cache-geometry = <32 1>;
322                         fsl,secondary-cache-geometry = <128 2>;
323                 };
325                 pamu2: pamu@2000 {
326                         reg = <0x2000 0x1000>;
327                         fsl,primary-cache-geometry = <32 1>;
328                         fsl,secondary-cache-geometry = <128 2>;
329                 };
331                 pamu3: pamu@3000 {
332                         reg = <0x3000 0x1000>;
333                         fsl,primary-cache-geometry = <32 1>;
334                         fsl,secondary-cache-geometry = <128 2>;
335                 };
336         };
338 /include/ "qoriq-mpic.dtsi"
340         guts: global-utilities@e0000 {
341                 compatible = "fsl,qoriq-device-config-1.0";
342                 reg = <0xe0000 0xe00>;
343                 fsl,has-rstcr;
344                 #sleep-cells = <1>;
345                 fsl,liodn-bits = <12>;
346         };
348         pins: global-utilities@e0e00 {
349                 compatible = "fsl,qoriq-pin-control-1.0";
350                 reg = <0xe0e00 0x200>;
351                 #sleep-cells = <2>;
352         };
354 /include/ "qoriq-clockgen1.dtsi"
355         global-utilities@e1000 {
356                 compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
357         };
359         rcpm: global-utilities@e2000 {
360                 compatible = "fsl,qoriq-rcpm-1.0";
361                 reg = <0xe2000 0x1000>;
362                 #sleep-cells = <1>;
363         };
365         sfp: sfp@e8000 {
366                 compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
367                 reg        = <0xe8000 0x1000>;
368         };
370         serdes: serdes@ea000 {
371                 compatible = "fsl,p3041-serdes";
372                 reg        = <0xea000 0x1000>;
373         };
375 /include/ "qoriq-dma-0.dtsi"
376         dma@100300 {
377                 fsl,iommu-parent = <&pamu0>;
378                 fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
379         };
381 /include/ "qoriq-dma-1.dtsi"
382         dma@101300 {
383                 fsl,iommu-parent = <&pamu0>;
384                 fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
385         };
387 /include/ "qoriq-espi-0.dtsi"
388         spi@110000 {
389                 fsl,espi-num-chipselects = <4>;
390         };
392 /include/ "qoriq-esdhc-0.dtsi"
393         sdhc@114000 {
394                 compatible = "fsl,p3041-esdhc", "fsl,esdhc";
395                 fsl,iommu-parent = <&pamu1>;
396                 fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
397                 sdhci,auto-cmd12;
398         };
400 /include/ "qoriq-i2c-0.dtsi"
401 /include/ "qoriq-i2c-1.dtsi"
402 /include/ "qoriq-duart-0.dtsi"
403 /include/ "qoriq-duart-1.dtsi"
404 /include/ "qoriq-gpio-0.dtsi"
405 /include/ "qoriq-usb2-mph-0.dtsi"
406         usb0: usb@210000 {
407                 compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
408                 phy_type = "utmi";
409                 fsl,iommu-parent = <&pamu1>;
410                 fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
411                 port0;
412         };
414 /include/ "qoriq-usb2-dr-0.dtsi"
415         usb1: usb@211000 {
416                 compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
417                 fsl,iommu-parent = <&pamu1>;
418                 fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
419                 dr_mode = "host";
420                 phy_type = "utmi";
421         };
423 /include/ "qoriq-sata2-0.dtsi"
424         sata@220000 {
425                 fsl,iommu-parent = <&pamu1>;
426                 fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
427         };
429 /include/ "qoriq-sata2-1.dtsi"
430         sata@221000 {
431                 fsl,iommu-parent = <&pamu1>;
432                 fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
433         };
435 /include/ "qoriq-sec4.2-0.dtsi"
436 crypto: crypto@300000 {
437                 fsl,iommu-parent = <&pamu1>;
438         };
440 /include/ "qoriq-qman1.dtsi"
441 /include/ "qoriq-bman1.dtsi"
443 /include/ "qoriq-fman-0.dtsi"
444 /include/ "qoriq-fman-0-1g-0.dtsi"
445 /include/ "qoriq-fman-0-1g-1.dtsi"
446 /include/ "qoriq-fman-0-1g-2.dtsi"
447 /include/ "qoriq-fman-0-1g-3.dtsi"
448 /include/ "qoriq-fman-0-1g-4.dtsi"
449 /include/ "qoriq-fman-0-10g-0.dtsi"
450         fman@400000 {
451                 enet0: ethernet@e0000 {
452                 };
454                 enet1: ethernet@e2000 {
455                 };
457                 enet2: ethernet@e4000 {
458                 };
460                 enet3: ethernet@e6000 {
461                 };
463                 enet4: ethernet@e8000 {
464                 };
466                 enet5: ethernet@f0000 {
467                 };
468         };