arch/powerpc/boot/dts/fsl/t1024rdb.dts

   1 /*
   2  * T1024 RDB Device Tree Source
   3  *
   4  * Copyright 2014 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "t102xsi-pre.dtsi"
  36
  37 / {
  38         model = "fsl,T1024RDB";
  39         compatible = "fsl,T1024RDB";
  40         #address-cells = <2>;
  41         #size-cells = <2>;
  42         interrupt-parent = <&mpic>;
  43
  44         aliases {
  45                 sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4;
  46         };
  47
  48         reserved-memory {
  49                 #address-cells = <2>;
  50                 #size-cells = <2>;
  51                 ranges;
  52
  53                 bman_fbpr: bman-fbpr {
  54                         size = <0 0x1000000>;
  55                         alignment = <0 0x1000000>;
  56                 };
  57
  58                 qman_fqd: qman-fqd {
  59                         size = <0 0x400000>;
  60                         alignment = <0 0x400000>;
  61                 };
  62
  63                 qman_pfdr: qman-pfdr {
  64                         size = <0 0x2000000>;
  65                         alignment = <0 0x2000000>;
  66                 };
  67         };
  68
  69         ifc: localbus@ffe124000 {
  70                 reg = <0xf 0xfe124000 0 0x2000>;
  71                 ranges = <0 0 0xf 0xe8000000 0x08000000
  72                           2 0 0xf 0xff800000 0x00010000
  73                           3 0 0xf 0xffdf0000 0x00008000>;
  74
  75                 nor@0,0 {
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78                         compatible = "cfi-flash";
  79                         reg = <0x0 0x0 0x8000000>;
  80                         bank-width = <2>;
  81                         device-width = <1>;
  82                 };
  83
  84                 nand@1,0 {
  85                         #address-cells = <1>;
  86                         #size-cells = <1>;
  87                         compatible = "fsl,ifc-nand";
  88                         reg = <0x2 0x0 0x10000>;
  89                 };
  90
  91                 board-control@2,0 {
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94                         compatible = "fsl,t1024-cpld";
  95                         reg = <3 0 0x300>;
  96                         ranges = <0 3 0 0x300>;
  97                         bank-width = <1>;
  98                         device-width = <1>;
  99                 };
 100         };
 101
 102         memory {
 103                 device_type = "memory";
 104         };
 105
 106         dcsr: dcsr@f00000000 {
 107                 ranges = <0x00000000 0xf 0x00000000 0x01072000>;
 108         };
 109
 110         bportals: bman-portals@ff4000000 {
 111                 ranges = <0x0 0xf 0xf4000000 0x2000000>;
 112         };
 113
 114         qportals: qman-portals@ff6000000 {
 115                 ranges = <0x0 0xf 0xf6000000 0x2000000>;
 116         };
 117
 118         soc: soc@ffe000000 {
 119                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 120                 reg = <0xf 0xfe000000 0 0x00001000>;
 121                 spi@110000 {
 122                         flash@0 {
 123                                 #address-cells = <1>;
 124                                 #size-cells = <1>;
 125                                 compatible = "micron,n25q512ax3", "jedec,spi-nor";
 126                                 reg = <0>;
 127                                 spi-max-frequency = <10000000>; /* input clk */
 128                         };
 129
 130                         slic@1 {
 131                                 compatible = "maxim,ds26522";
 132                                 reg = <1>;
 133                                 spi-max-frequency = <2000000>;
 134                         };
 135
 136                         slic@2 {
 137                                 compatible = "maxim,ds26522";
 138                                 reg = <2>;
 139                                 spi-max-frequency = <2000000>;
 140                         };
 141                 };
 142
 143                 i2c@118000 {
 144                         adt7461@4c {
 145                                 /* Thermal Monitor */
 146                                 compatible = "adi,adt7461";
 147                                 reg = <0x4c>;
 148                         };
 149
 150                         current-sensor@40 {
 151                                 compatible = "ti,ina220";
 152                                 reg = <0x40>;
 153                                 shunt-resistor = <1000>;
 154                         };
 155
 156                         eeprom@50 {
 157                                 compatible = "atmel,24c256";
 158                                 reg = <0x50>;
 159                         };
 160
 161                         rtc@68 {
 162                                 compatible = "dallas,ds1339";
 163                                 reg = <0x68>;
 164                                 interrupts = <0x1 0x1 0 0>;
 165                         };
 166                 };
 167
 168                 i2c@118100 {
 169                         pca9546@77 {
 170                                 compatible = "nxp,pca9546";
 171                                 reg = <0x77>;
 172                                 #address-cells = <1>;
 173                                 #size-cells = <0>;
 174                         };
 175                 };
 176
 177                 fman@400000 {
 178                         fm1mac1: ethernet@e0000 {
 179                                 phy-handle = <&xg_aqr105_phy3>;
 180                                 phy-connection-type = "xgmii";
 181                                 sleep = <&rcpm 0x80000000>;
 182                         };
 183
 184                         fm1mac2: ethernet@e2000 {
 185                                 sleep = <&rcpm 0x40000000>;
 186                         };
 187
 188                         fm1mac3: ethernet@e4000 {
 189                                 phy-handle = <&rgmii_phy2>;
 190                                 phy-connection-type = "rgmii";
 191                                 sleep = <&rcpm 0x20000000>;
 192                         };
 193
 194                         fm1mac4: ethernet@e6000 {
 195                                 phy-handle = <&rgmii_phy1>;
 196                                 phy-connection-type = "rgmii";
 197                                 sleep = <&rcpm 0x10000000>;
 198                         };
 199
 200
 201                         mdio0: mdio@fc000 {
 202                                 rgmii_phy1: ethernet-phy@2 {
 203                                         reg = <0x2>;
 204                                 };
 205                                 rgmii_phy2: ethernet-phy@6 {
 206                                         reg = <0x6>;
 207                                 };
 208                         };
 209
 210                         xmdio0: mdio@fd000 {
 211                                 xg_aqr105_phy3: ethernet-phy@1 {
 212                                         compatible = "ethernet-phy-ieee802.3-c45";
 213                                         reg = <0x1>;
 214                                 };
 215                                 sg_2500_aqr105_phy4: ethernet-phy@2 {
 216                                         compatible = "ethernet-phy-ieee802.3-c45";
 217                                         reg = <0x2>;
 218                                 };
 219                         };
 220                 };
 221         };
 222
 223         pci0: pcie@ffe240000 {
 224                 reg = <0xf 0xfe240000 0 0x10000>;
 225                 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
 226                           0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
 227                 pcie@0 {
 228                         ranges = <0x02000000 0 0xe0000000
 229                                   0x02000000 0 0xe0000000
 230                                   0 0x10000000
 231
 232                                   0x01000000 0 0x00000000
 233                                   0x01000000 0 0x00000000
 234                                   0 0x00010000>;
 235                 };
 236         };
 237
 238         pci1: pcie@ffe250000 {
 239                 reg = <0xf 0xfe250000 0 0x10000>;
 240                 ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
 241                           0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
 242                 pcie@0 {
 243                         ranges = <0x02000000 0 0xe0000000
 244                                   0x02000000 0 0xe0000000
 245                                   0 0x10000000
 246
 247                                   0x01000000 0 0x00000000
 248                                   0x01000000 0 0x00000000
 249                                   0 0x00010000>;
 250                 };
 251         };
 252
 253         pci2: pcie@ffe260000 {
 254                 reg = <0xf 0xfe260000 0 0x10000>;
 255                 ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
 256                           0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 257                 pcie@0 {
 258                         ranges = <0x02000000 0 0xe0000000
 259                                   0x02000000 0 0xe0000000
 260                                   0 0x10000000
 261
 262                                   0x01000000 0 0x00000000
 263                                   0x01000000 0 0x00000000
 264                                   0 0x00010000>;
 265                 };
 266         };
 267 };
 268
 269 #include "t1024si-post.dtsi"