2 * T2080/T2081 QDS Device Tree Source
4 * Copyright 2013 - 2014 Freescale Semiconductor Inc.
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 model = "fsl,T2080QDS";
37 compatible = "fsl,T2080QDS";
40 interrupt-parent = <&mpic>;
47 bman_fbpr: bman-fbpr {
49 alignment = <0 0x1000000>;
53 alignment = <0 0x400000>;
55 qman_pfdr: qman-pfdr {
57 alignment = <0 0x2000000>;
61 ifc: localbus@ffe124000 {
62 reg = <0xf 0xfe124000 0 0x2000>;
63 ranges = <0 0 0xf 0xe8000000 0x08000000
64 2 0 0xf 0xff800000 0x00010000
65 3 0 0xf 0xffdf0000 0x00008000>;
70 compatible = "cfi-flash";
71 reg = <0x0 0x0 0x8000000>;
79 compatible = "fsl,ifc-nand";
80 reg = <0x2 0x0 0x10000>;
83 boardctrl: board-control@3,0 {
86 compatible = "fsl,fpga-qixis";
88 ranges = <0 3 0 0x300>;
93 device_type = "memory";
96 dcsr: dcsr@f00000000 {
97 ranges = <0x00000000 0xf 0x00000000 0x01072000>;
100 bportals: bman-portals@ff4000000 {
101 ranges = <0x0 0xf 0xf4000000 0x2000000>;
104 qportals: qman-portals@ff6000000 {
105 ranges = <0x0 0xf 0xf6000000 0x2000000>;
109 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
110 reg = <0xf 0xfe000000 0 0x00001000>;
113 #address-cells = <1>;
115 compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */
117 spi-max-frequency = <40000000>; /* input clock */
121 #address-cells = <1>;
123 compatible = "sst,sst25wf040", "jedec,spi-nor";
125 spi-max-frequency = <35000000>;
129 #address-cells = <1>;
131 compatible = "eon,en25s64", "jedec,spi-nor";
133 spi-max-frequency = <35000000>;
139 compatible = "nxp,pca9547";
141 #address-cells = <1>;
145 #address-cells = <1>;
150 compatible = "atmel,24c512";
155 compatible = "atmel,24c02";
160 compatible = "atmel,24c02";
165 compatible = "dallas,ds3232";
167 interrupts = <0xb 0x1 0 0>;
172 #address-cells = <1>;
177 compatible = "atmel,24c02";
183 #address-cells = <1>;
188 compatible = "ti,ina220";
190 shunt-resistor = <1000>;
194 compatible = "ti,ina220";
196 shunt-resistor = <1000>;
201 #address-cells = <1>;
206 compatible = "adi,adt7461";
214 voltage-ranges = <1800 1800 3300 3300>;
218 pci0: pcie@ffe240000 {
219 reg = <0xf 0xfe240000 0 0x10000>;
220 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
221 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
223 ranges = <0x02000000 0 0xe0000000
224 0x02000000 0 0xe0000000
227 0x01000000 0 0x00000000
228 0x01000000 0 0x00000000
233 pci1: pcie@ffe250000 {
234 reg = <0xf 0xfe250000 0 0x10000>;
235 ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
236 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
238 ranges = <0x02000000 0 0xe0000000
239 0x02000000 0 0xe0000000
242 0x01000000 0 0x00000000
243 0x01000000 0 0x00000000
248 pci2: pcie@ffe260000 {
249 reg = <0xf 0xfe260000 0 0x1000>;
250 ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
251 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
253 ranges = <0x02000000 0 0xe0000000
254 0x02000000 0 0xe0000000
257 0x01000000 0 0x00000000
258 0x01000000 0 0x00000000
263 pci3: pcie@ffe270000 {
264 reg = <0xf 0xfe270000 0 0x10000>;
265 ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
266 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
268 ranges = <0x02000000 0 0xe0000000
269 0x02000000 0 0xe0000000
272 0x01000000 0 0x00000000
273 0x01000000 0 0x00000000