treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / arch / powerpc / boot / dts / mpc8378_mds.dts
blobe45b25554e8c722321813f448e0f2437b0ebb08b
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * MPC8378E MDS Device Tree Source
4  *
5  * Copyright 2007 Freescale Semiconductor Inc.
6  */
8 /dts-v1/;
10 / {
11         model = "fsl,mpc8378emds";
12         compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
13         #address-cells = <1>;
14         #size-cells = <1>;
16         aliases {
17                 ethernet0 = &enet0;
18                 ethernet1 = &enet1;
19                 serial0 = &serial0;
20                 serial1 = &serial1;
21                 pci0 = &pci0;
22                 pci1 = &pci1;
23                 pci2 = &pci2;
24         };
26         cpus {
27                 #address-cells = <1>;
28                 #size-cells = <0>;
30                 PowerPC,8378@0 {
31                         device_type = "cpu";
32                         reg = <0x0>;
33                         d-cache-line-size = <32>;
34                         i-cache-line-size = <32>;
35                         d-cache-size = <32768>;
36                         i-cache-size = <32768>;
37                         timebase-frequency = <0>;
38                         bus-frequency = <0>;
39                         clock-frequency = <0>;
40                 };
41         };
43         memory {
44                 device_type = "memory";
45                 reg = <0x00000000 0x20000000>;  // 512MB at 0
46         };
48         localbus@e0005000 {
49                 #address-cells = <2>;
50                 #size-cells = <1>;
51                 compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
52                 reg = <0xe0005000 0x1000>;
53                 interrupts = <77 0x8>;
54                 interrupt-parent = <&ipic>;
56                 // booting from NOR flash
57                 ranges = <0 0x0 0xfe000000 0x02000000
58                           1 0x0 0xf8000000 0x00008000
59                           3 0x0 0xe0600000 0x00008000>;
61                 flash@0,0 {
62                         #address-cells = <1>;
63                         #size-cells = <1>;
64                         compatible = "cfi-flash";
65                         reg = <0 0x0 0x2000000>;
66                         bank-width = <2>;
67                         device-width = <1>;
69                         u-boot@0 {
70                                 reg = <0x0 0x100000>;
71                                 read-only;
72                         };
74                         fs@100000 {
75                                 reg = <0x100000 0x800000>;
76                         };
78                         kernel@1d00000 {
79                                 reg = <0x1d00000 0x200000>;
80                         };
82                         dtb@1f00000 {
83                                 reg = <0x1f00000 0x100000>;
84                         };
85                 };
87                 bcsr@1,0 {
88                         reg = <1 0x0 0x8000>;
89                         compatible = "fsl,mpc837xmds-bcsr";
90                 };
92                 nand@3,0 {
93                         #address-cells = <1>;
94                         #size-cells = <1>;
95                         compatible = "fsl,mpc8378-fcm-nand",
96                                      "fsl,elbc-fcm-nand";
97                         reg = <3 0x0 0x8000>;
99                         u-boot@0 {
100                                 reg = <0x0 0x100000>;
101                                 read-only;
102                         };
104                         kernel@100000 {
105                                 reg = <0x100000 0x300000>;
106                         };
108                         fs@400000 {
109                                 reg = <0x400000 0x1c00000>;
110                         };
111                 };
112         };
114         soc@e0000000 {
115                 #address-cells = <1>;
116                 #size-cells = <1>;
117                 device_type = "soc";
118                 compatible = "simple-bus";
119                 ranges = <0x0 0xe0000000 0x00100000>;
120                 reg = <0xe0000000 0x00000200>;
121                 bus-frequency = <0>;
123                 wdt@200 {
124                         compatible = "mpc83xx_wdt";
125                         reg = <0x200 0x100>;
126                 };
128                 sleep-nexus {
129                         #address-cells = <1>;
130                         #size-cells = <1>;
131                         compatible = "simple-bus";
132                         sleep = <&pmc 0x0c000000>;
133                         ranges;
135                         i2c@3000 {
136                                 #address-cells = <1>;
137                                 #size-cells = <0>;
138                                 cell-index = <0>;
139                                 compatible = "fsl-i2c";
140                                 reg = <0x3000 0x100>;
141                                 interrupts = <14 0x8>;
142                                 interrupt-parent = <&ipic>;
143                                 dfsrr;
145                                 rtc@68 {
146                                         compatible = "dallas,ds1374";
147                                         reg = <0x68>;
148                                         interrupts = <19 0x8>;
149                                         interrupt-parent = <&ipic>;
150                                 };
151                         };
153                         sdhci@2e000 {
154                                 compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
155                                 reg = <0x2e000 0x1000>;
156                                 interrupts = <42 0x8>;
157                                 interrupt-parent = <&ipic>;
158                                 sdhci,wp-inverted;
159                                 /* Filled in by U-Boot */
160                                 clock-frequency = <0>;
161                         };
162                 };
164                 i2c@3100 {
165                         #address-cells = <1>;
166                         #size-cells = <0>;
167                         cell-index = <1>;
168                         compatible = "fsl-i2c";
169                         reg = <0x3100 0x100>;
170                         interrupts = <15 0x8>;
171                         interrupt-parent = <&ipic>;
172                         dfsrr;
173                 };
175                 spi@7000 {
176                         cell-index = <0>;
177                         compatible = "fsl,spi";
178                         reg = <0x7000 0x1000>;
179                         interrupts = <16 0x8>;
180                         interrupt-parent = <&ipic>;
181                         mode = "cpu";
182                 };
184                 dma@82a8 {
185                         #address-cells = <1>;
186                         #size-cells = <1>;
187                         compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
188                         reg = <0x82a8 4>;
189                         ranges = <0 0x8100 0x1a8>;
190                         interrupt-parent = <&ipic>;
191                         interrupts = <71 8>;
192                         cell-index = <0>;
193                         dma-channel@0 {
194                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
195                                 reg = <0 0x80>;
196                                 cell-index = <0>;
197                                 interrupt-parent = <&ipic>;
198                                 interrupts = <71 8>;
199                         };
200                         dma-channel@80 {
201                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
202                                 reg = <0x80 0x80>;
203                                 cell-index = <1>;
204                                 interrupt-parent = <&ipic>;
205                                 interrupts = <71 8>;
206                         };
207                         dma-channel@100 {
208                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
209                                 reg = <0x100 0x80>;
210                                 cell-index = <2>;
211                                 interrupt-parent = <&ipic>;
212                                 interrupts = <71 8>;
213                         };
214                         dma-channel@180 {
215                                 compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
216                                 reg = <0x180 0x28>;
217                                 cell-index = <3>;
218                                 interrupt-parent = <&ipic>;
219                                 interrupts = <71 8>;
220                         };
221                 };
223                 usb@23000 {
224                         compatible = "fsl-usb2-dr";
225                         reg = <0x23000 0x1000>;
226                         #address-cells = <1>;
227                         #size-cells = <0>;
228                         interrupt-parent = <&ipic>;
229                         interrupts = <38 0x8>;
230                         dr_mode = "host";
231                         phy_type = "ulpi";
232                         sleep = <&pmc 0x00c00000>;
233                 };
235                 enet0: ethernet@24000 {
236                         #address-cells = <1>;
237                         #size-cells = <1>;
238                         cell-index = <0>;
239                         device_type = "network";
240                         model = "eTSEC";
241                         compatible = "gianfar";
242                         reg = <0x24000 0x1000>;
243                         ranges = <0x0 0x24000 0x1000>;
244                         local-mac-address = [ 00 00 00 00 00 00 ];
245                         interrupts = <32 0x8 33 0x8 34 0x8>;
246                         phy-connection-type = "mii";
247                         interrupt-parent = <&ipic>;
248                         tbi-handle = <&tbi0>;
249                         phy-handle = <&phy2>;
250                         sleep = <&pmc 0xc0000000>;
251                         fsl,magic-packet;
253                         mdio@520 {
254                                 #address-cells = <1>;
255                                 #size-cells = <0>;
256                                 compatible = "fsl,gianfar-mdio";
257                                 reg = <0x520 0x20>;
259                                 phy2: ethernet-phy@2 {
260                                         interrupt-parent = <&ipic>;
261                                         interrupts = <17 0x8>;
262                                         reg = <0x2>;
263                                 };
265                                 phy3: ethernet-phy@3 {
266                                         interrupt-parent = <&ipic>;
267                                         interrupts = <18 0x8>;
268                                         reg = <0x3>;
269                                 };
271                                 tbi0: tbi-phy@11 {
272                                         reg = <0x11>;
273                                         device_type = "tbi-phy";
274                                 };
275                         };
276                 };
278                 enet1: ethernet@25000 {
279                         #address-cells = <1>;
280                         #size-cells = <1>;
281                         cell-index = <1>;
282                         device_type = "network";
283                         model = "eTSEC";
284                         compatible = "gianfar";
285                         reg = <0x25000 0x1000>;
286                         ranges = <0x0 0x25000 0x1000>;
287                         local-mac-address = [ 00 00 00 00 00 00 ];
288                         interrupts = <35 0x8 36 0x8 37 0x8>;
289                         phy-connection-type = "mii";
290                         interrupt-parent = <&ipic>;
291                         tbi-handle = <&tbi1>;
292                         phy-handle = <&phy3>;
293                         sleep = <&pmc 0x30000000>;
294                         fsl,magic-packet;
296                         mdio@520 {
297                                 #address-cells = <1>;
298                                 #size-cells = <0>;
299                                 compatible = "fsl,gianfar-tbi";
300                                 reg = <0x520 0x20>;
302                                 tbi1: tbi-phy@11 {
303                                         reg = <0x11>;
304                                         device_type = "tbi-phy";
305                                 };
306                         };
307                 };
309                 serial0: serial@4500 {
310                         cell-index = <0>;
311                         device_type = "serial";
312                         compatible = "fsl,ns16550", "ns16550";
313                         reg = <0x4500 0x100>;
314                         clock-frequency = <0>;
315                         interrupts = <9 0x8>;
316                         interrupt-parent = <&ipic>;
317                 };
319                 serial1: serial@4600 {
320                         cell-index = <1>;
321                         device_type = "serial";
322                         compatible = "fsl,ns16550", "ns16550";
323                         reg = <0x4600 0x100>;
324                         clock-frequency = <0>;
325                         interrupts = <10 0x8>;
326                         interrupt-parent = <&ipic>;
327                 };
329                 crypto@30000 {
330                         compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
331                                      "fsl,sec2.1", "fsl,sec2.0";
332                         reg = <0x30000 0x10000>;
333                         interrupts = <11 0x8>;
334                         interrupt-parent = <&ipic>;
335                         fsl,num-channels = <4>;
336                         fsl,channel-fifo-len = <24>;
337                         fsl,exec-units-mask = <0x9fe>;
338                         fsl,descriptor-types-mask = <0x3ab0ebf>;
339                         sleep = <&pmc 0x03000000>;
340                 };
342                 /* IPIC
343                  * interrupts cell = <intr #, sense>
344                  * sense values match linux IORESOURCE_IRQ_* defines:
345                  * sense == 8: Level, low assertion
346                  * sense == 2: Edge, high-to-low change
347                  */
348                 ipic: pic@700 {
349                         compatible = "fsl,ipic";
350                         interrupt-controller;
351                         #address-cells = <0>;
352                         #interrupt-cells = <2>;
353                         reg = <0x700 0x100>;
354                 };
356                 pmc: power@b00 {
357                         compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
358                         reg = <0xb00 0x100 0xa00 0x100>;
359                         interrupts = <80 0x8>;
360                         interrupt-parent = <&ipic>;
361                 };
362         };
364         pci0: pci@e0008500 {
365                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
366                 interrupt-map = <
368                                 /* IDSEL 0x11 */
369                                  0x8800 0x0 0x0 0x1 &ipic 20 0x8
370                                  0x8800 0x0 0x0 0x2 &ipic 21 0x8
371                                  0x8800 0x0 0x0 0x3 &ipic 22 0x8
372                                  0x8800 0x0 0x0 0x4 &ipic 23 0x8
374                                 /* IDSEL 0x12 */
375                                  0x9000 0x0 0x0 0x1 &ipic 22 0x8
376                                  0x9000 0x0 0x0 0x2 &ipic 23 0x8
377                                  0x9000 0x0 0x0 0x3 &ipic 20 0x8
378                                  0x9000 0x0 0x0 0x4 &ipic 21 0x8
380                                 /* IDSEL 0x13 */
381                                  0x9800 0x0 0x0 0x1 &ipic 23 0x8
382                                  0x9800 0x0 0x0 0x2 &ipic 20 0x8
383                                  0x9800 0x0 0x0 0x3 &ipic 21 0x8
384                                  0x9800 0x0 0x0 0x4 &ipic 22 0x8
386                                 /* IDSEL 0x15 */
387                                  0xa800 0x0 0x0 0x1 &ipic 20 0x8
388                                  0xa800 0x0 0x0 0x2 &ipic 21 0x8
389                                  0xa800 0x0 0x0 0x3 &ipic 22 0x8
390                                  0xa800 0x0 0x0 0x4 &ipic 23 0x8
392                                 /* IDSEL 0x16 */
393                                  0xb000 0x0 0x0 0x1 &ipic 23 0x8
394                                  0xb000 0x0 0x0 0x2 &ipic 20 0x8
395                                  0xb000 0x0 0x0 0x3 &ipic 21 0x8
396                                  0xb000 0x0 0x0 0x4 &ipic 22 0x8
398                                 /* IDSEL 0x17 */
399                                  0xb800 0x0 0x0 0x1 &ipic 22 0x8
400                                  0xb800 0x0 0x0 0x2 &ipic 23 0x8
401                                  0xb800 0x0 0x0 0x3 &ipic 20 0x8
402                                  0xb800 0x0 0x0 0x4 &ipic 21 0x8
404                                 /* IDSEL 0x18 */
405                                  0xc000 0x0 0x0 0x1 &ipic 21 0x8
406                                  0xc000 0x0 0x0 0x2 &ipic 22 0x8
407                                  0xc000 0x0 0x0 0x3 &ipic 23 0x8
408                                  0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
409                 interrupt-parent = <&ipic>;
410                 interrupts = <66 0x8>;
411                 bus-range = <0x0 0x0>;
412                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
413                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
414                           0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
415                 clock-frequency = <0>;
416                 sleep = <&pmc 0x00010000>;
417                 #interrupt-cells = <1>;
418                 #size-cells = <2>;
419                 #address-cells = <3>;
420                 reg = <0xe0008500 0x100         /* internal registers */
421                        0xe0008300 0x8>;         /* config space access registers */
422                 compatible = "fsl,mpc8349-pci";
423                 device_type = "pci";
424         };
426         pci1: pcie@e0009000 {
427                 #address-cells = <3>;
428                 #size-cells = <2>;
429                 #interrupt-cells = <1>;
430                 device_type = "pci";
431                 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
432                 reg = <0xe0009000 0x00001000>;
433                 ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
434                           0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
435                 bus-range = <0 255>;
436                 interrupt-map-mask = <0xf800 0 0 7>;
437                 interrupt-map = <0 0 0 1 &ipic 1 8
438                                  0 0 0 2 &ipic 1 8
439                                  0 0 0 3 &ipic 1 8
440                                  0 0 0 4 &ipic 1 8>;
441                 sleep = <&pmc 0x00300000>;
442                 clock-frequency = <0>;
444                 pcie@0 {
445                         #address-cells = <3>;
446                         #size-cells = <2>;
447                         device_type = "pci";
448                         reg = <0 0 0 0 0>;
449                         ranges = <0x02000000 0 0xa8000000
450                                   0x02000000 0 0xa8000000
451                                   0 0x10000000
452                                   0x01000000 0 0x00000000
453                                   0x01000000 0 0x00000000
454                                   0 0x00800000>;
455                 };
456         };
458         pci2: pcie@e000a000 {
459                 #address-cells = <3>;
460                 #size-cells = <2>;
461                 #interrupt-cells = <1>;
462                 device_type = "pci";
463                 compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
464                 reg = <0xe000a000 0x00001000>;
465                 ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
466                           0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
467                 bus-range = <0 255>;
468                 interrupt-map-mask = <0xf800 0 0 7>;
469                 interrupt-map = <0 0 0 1 &ipic 2 8
470                                  0 0 0 2 &ipic 2 8
471                                  0 0 0 3 &ipic 2 8
472                                  0 0 0 4 &ipic 2 8>;
473                 sleep = <&pmc 0x000c0000>;
474                 clock-frequency = <0>;
476                 pcie@0 {
477                         #address-cells = <3>;
478                         #size-cells = <2>;
479                         device_type = "pci";
480                         reg = <0 0 0 0 0>;
481                         ranges = <0x02000000 0 0xc8000000
482                                   0x02000000 0 0xc8000000
483                                   0 0x10000000
484                                   0x01000000 0 0x00000000
485                                   0x01000000 0 0x00000000
486                                   0 0x00800000>;
487                 };
488         };