arch/powerpc/boot/dts/pcm032.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source
   4  *
   5  * Copyright (C) 2006-2009 Pengutronix
   6  * Sascha Hauer <s.hauer@pengutronix.de>
   7  * Juergen Beisert <j.beisert@pengutronix.de>
   8  * Wolfram Sang <w.sang@pengutronix.de>
   9  */
  10
  11 /include/ "mpc5200b.dtsi"
  12
  13 &gpt0 { fsl,has-wdt; };
  14 &gpt2 { gpio-controller; };
  15 &gpt3 { gpio-controller; };
  16 &gpt4 { gpio-controller; };
  17 &gpt5 { gpio-controller; };
  18 &gpt6 { gpio-controller; };
  19 &gpt7 { gpio-controller; };
  20
  21 / {
  22         model = "phytec,pcm032";
  23         compatible = "phytec,pcm032";
  24
  25         memory {
  26                 reg = <0x00000000 0x08000000>;  // 128MB
  27         };
  28
  29         soc5200@f0000000 {
  30                 psc@2000 {      /* PSC1 is ac97 */
  31                         compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
  32                         cell-index = <0>;
  33                 };
  34
  35                 /* PSC2 port is used by CAN1/2 */
  36                 psc@2200 {
  37                         status = "disabled";
  38                 };
  39
  40                 psc@2400 { /* PSC3 in UART mode */
  41                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  42                 };
  43
  44                 /* PSC4 is ??? */
  45                 psc@2600 {
  46                         status = "disabled";
  47                 };
  48
  49                 /* PSC5 is ??? */
  50                 psc@2800 {
  51                         status = "disabled";
  52                 };
  53
  54                 psc@2c00 { /* PSC6 in UART mode */
  55                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  56                 };
  57
  58                 ethernet@3000 {
  59                         phy-handle = <&phy0>;
  60                 };
  61
  62                 mdio@3000 {
  63                         phy0: ethernet-phy@0 {
  64                                 reg = <0>;
  65                         };
  66                 };
  67
  68                 i2c@3d40 {
  69                         rtc@51 {
  70                                 compatible = "nxp,pcf8563";
  71                                 reg = <0x51>;
  72                         };
  73                         eeprom@52 {
  74                                 compatible = "catalyst,24c32", "atmel,24c32";
  75                                 reg = <0x52>;
  76                                 pagesize = <32>;
  77                         };
  78                 };
  79         };
  80
  81         pci@f0000d00 {
  82                 interrupt-map-mask = <0xf800 0 0 7>;
  83                 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
  84                                  0xc000 0 0 2 &mpc5200_pic 1 1 3
  85                                  0xc000 0 0 3 &mpc5200_pic 1 2 3
  86                                  0xc000 0 0 4 &mpc5200_pic 1 3 3
  87
  88                                  0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
  89                                  0xc800 0 0 2 &mpc5200_pic 1 2 3
  90                                  0xc800 0 0 3 &mpc5200_pic 1 3 3
  91                                  0xc800 0 0 4 &mpc5200_pic 0 0 3>;
  92                 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
  93                           0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
  94                           0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
  95         };
  96
  97         localbus {
  98                 ranges = <0 0 0xfe000000 0x02000000
  99                           1 0 0xfc000000 0x02000000
 100                           2 0 0xfbe00000 0x00200000
 101                           3 0 0xf9e00000 0x02000000
 102                           4 0 0xf7e00000 0x02000000
 103                           5 0 0xe6000000 0x02000000
 104                           6 0 0xe8000000 0x02000000
 105                           7 0 0xea000000 0x02000000>;
 106
 107                 flash@0,0 {
 108                         compatible = "cfi-flash";
 109                         reg = <0 0 0x02000000>;
 110                         bank-width = <4>;
 111                         #size-cells = <1>;
 112                         #address-cells = <1>;
 113
 114                         partition@0 {
 115                                 label = "ubootl";
 116                                 reg = <0x00000000 0x00040000>;
 117                         };
 118                         partition@40000 {
 119                                 label = "kernel";
 120                                 reg = <0x00040000 0x001c0000>;
 121                         };
 122                         partition@200000 {
 123                                 label = "jffs2";
 124                                 reg = <0x00200000 0x01d00000>;
 125                         };
 126                         partition@1f00000 {
 127                                 label = "uboot";
 128                                 reg = <0x01f00000 0x00040000>;
 129                         };
 130                         partition@1f40000 {
 131                                 label = "env";
 132                                 reg = <0x01f40000 0x00040000>;
 133                         };
 134                         partition@1f80000 {
 135                                 label = "oftree";
 136                                 reg = <0x01f80000 0x00040000>;
 137                         };
 138                         partition@1fc0000 {
 139                                 label = "space";
 140                                 reg = <0x01fc0000 0x00040000>;
 141                         };
 142                 };
 143
 144                 sram@2,0 {
 145                         compatible = "mtd-ram";
 146                         reg = <2 0 0x00200000>;
 147                         bank-width = <2>;
 148                 };
 149
 150                 /*
 151                  * example snippets for FPGA
 152                  *
 153                  * fpga@3,0 {
 154                  *       compatible = "fpga_driver";
 155                  *       reg = <3 0 0x02000000>;
 156                  *       bank-width = <4>;
 157                  * };
 158                  *
 159                  * fpga@4,0 {
 160                  *       compatible = "fpga_driver";
 161                  *       reg = <4 0 0x02000000>;
 162                  *       bank-width = <4>;
 163                  * };
 164                  */
 165
 166                 /*
 167                  * example snippets for free chipselects
 168                  *
 169                  * device@5,0 {
 170                  *       compatible = "custom_driver";
 171                  *       reg = <5 0 0x02000000>;
 172                  * };
 173                  *
 174                  * device@6,0 {
 175                  *       compatible = "custom_driver";
 176                  *       reg = <6 0 0x02000000>;
 177                  * };
 178                  *
 179                  * device@7,0 {
 180                  *       compatible = "custom_driver";
 181                  *       reg = <7 0 0x02000000>;
 182                  * };
 183                  */
 184         };
 185 };