treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / arch / powerpc / boot / dts / pdm360ng.dts
blob67c3b9db75d76a3b0f87c97241804c3a72d317af
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Device Tree Source for IFM PDM360NG.
4  *
5  * Copyright 2009 - 2010 DENX Software Engineering.
6  * Anatolij Gustschin <agust@denx.de>
7  *
8  * Based on MPC5121E ADS dts.
9  * Copyright 2008 Freescale Semiconductor Inc.
10  */
12 #include "mpc5121.dtsi"
14 / {
15         model = "pdm360ng";
16         compatible = "ifm,pdm360ng", "fsl,mpc5121";
17         #address-cells = <1>;
18         #size-cells = <1>;
19         interrupt-parent = <&ipic>;
21         memory {
22                 device_type = "memory";
23                 reg = <0x00000000 0x20000000>;  // 512MB at 0
24         };
26         nfc@40000000 {
27                 bank-width = <0x1>;
28                 chips = <0x1>;
30                 partition@0 {
31                         label = "nand0";
32                         reg = <0x0 0x40000000>;
33                 };
34         };
36         localbus@80000020 {
37                 ranges = <0x0 0x0 0xf0000000 0x10000000   /* Flash */
38                           0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */
40                 flash@0,0 {
41                         compatible = "amd,s29gl01gp", "cfi-flash";
42                         reg = <0 0x00000000 0x08000000
43                                0 0x08000000 0x08000000>;
44                         #address-cells = <1>;
45                         #size-cells = <1>;
46                         bank-width = <4>;
47                         device-width = <2>;
49                         partition@0 {
50                                 label = "u-boot";
51                                 reg = <0x00000000 0x00080000>;
52                                 read-only;
53                         };
54                         partition@80000 {
55                                 label = "environment";
56                                 reg = <0x00080000 0x00080000>;
57                                 read-only;
58                         };
59                         partition@100000 {
60                                 label = "splash-image";
61                                 reg = <0x00100000 0x00080000>;
62                                 read-only;
63                         };
64                         partition@180000 {
65                                 label = "device-tree";
66                                 reg = <0x00180000 0x00040000>;
67                         };
68                         partition@1c0000 {
69                                 label = "kernel";
70                                 reg = <0x001c0000 0x00500000>;
71                         };
72                         partition@6c0000 {
73                                 label = "filesystem";
74                                 reg = <0x006c0000 0x07940000>;
75                         };
76                 };
78                 mram0@2,0 {
79                         compatible = "mtd-ram";
80                         reg = <2 0x00000 0x10000>;
81                         bank-width = <2>;
82                 };
84                 mram1@2,10000 {
85                         compatible = "mtd-ram";
86                         reg = <2 0x010000 0x10000>;
87                         bank-width = <2>;
88                 };
89         };
91         soc@80000000 {
93                 i2c@1700 {
94                         fsl,preserve-clocking;
96                         eeprom@50 {
97                                 compatible = "atmel,24c01";
98                                 reg = <0x50>;
99                         };
101                         rtc@68 {
102                                 compatible = "st,m41t00";
103                                 reg = <0x68>;
104                         };
105                 };
107                 i2c@1720 {
108                         status = "disabled";
109                 };
111                 i2c@1740 {
112                         fsl,preserve-clocking;
113                 };
115                 ethernet@2800 {
116                         phy-handle = <&phy0>;
117                 };
119                 mdio@2800 {
120                         phy0: ethernet-phy@1f {
121                                 compatible = "smsc,lan8700";
122                                 reg = <0x1f>;
123                         };
124                 };
126                 /* USB1 using external ULPI PHY */
127                 usb@3000 {
128                         dr_mode = "host";
129                 };
131                 /* USB0 using internal UTMI PHY */
132                 usb@4000 {
133                         fsl,invert-pwr-fault;
134                 };
136                 psc@11000 {
137                         compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
138                 };
140                 psc@11100 {
141                         compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
142                 };
144                 psc@11200 {
145                         compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
146                 };
148                 psc@11300 {
149                         compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
150                 };
152                 psc@11400 {
153                         compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
154                 };
156                 psc@11500 {
157                         status = "disabled";
158                 };
160                 psc@11600 {
161                         compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
162                 };
164                 psc@11700 {
165                         status = "disabled";
166                 };
168                 psc@11800 {
169                         compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
170                 };
172                 psc@11900 {
173                         compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
174                         #address-cells = <1>;
175                         #size-cells = <0>;
177                         /* ADS7845 touch screen controller */
178                         ts@0 {
179                                 compatible = "ti,ads7846";
180                                 reg = <0x0>;
181                                 spi-max-frequency = <3000000>;
182                                 /* pen irq is GPIO25 */
183                                 interrupts = <78 0x8>;
184                         };
185                 };
187                 psc@11a00 {
188                         status = "disabled";
189                 };
191                 psc@11b00 {
192                         compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
193                 };
194         };