| blob | 585ea19765501112067f962183e8ebf93d6c4091 |
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3 * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
4 * Initial PowerPC version.
5 * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
6 * Rewritten for PReP
7 * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
8 * Low-level exception handers, MMU support, and rewrite.
9 * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
10 * PowerPC 8xx modifications.
11 * Copyright (c) 1998-1999 TiVo, Inc.
12 * PowerPC 403GCX modifications.
13 * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
14 * PowerPC 403GCX/405GP modifications.
15 * Copyright 2000 MontaVista Software Inc.
16 * PPC405 modifications
17 * PowerPC 403GCX/405GP modifications.
18 * Author: MontaVista Software, Inc.
19 * frank_rowand@mvista.com or source@mvista.com
20 * debbie_chu@mvista.com
21 *
22 * Module name: head_4xx.S
23 *
24 * Description:
25 * Kernel execution entry point code.
26 */
28 #include <linux/init.h>
29 #include <asm/processor.h>
30 #include <asm/page.h>
31 #include <asm/mmu.h>
32 #include <asm/pgtable.h>
33 #include <asm/cputable.h>
34 #include <asm/thread_info.h>
35 #include <asm/ppc_asm.h>
36 #include <asm/asm-offsets.h>
37 #include <asm/ptrace.h>
38 #include <asm/export.h>
39 #include <asm/asm-405.h>
41 #include "head_32.h"
43 /* As with the other PowerPC ports, it is expected that when code
44 * execution begins here, the following registers contain valid, yet
45 * optional, information:
46 *
47 * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
48 * r4 - Starting address of the init RAM disk
49 * r5 - Ending address of the init RAM disk
50 * r6 - Start of kernel command line string (e.g. "mem=96m")
51 * r7 - End of kernel command line string
52 *
53 * This is all going to change RSN when we add bi_recs....... -- Dan
54 */
55 __HEAD
56 _ENTRY(_stext);
57 _ENTRY(_start);
59 mr r31,r3 /* save device tree ptr */
61 /* We have to turn on the MMU right away so we get cache modes
62 * set correctly.
63 */
64 bl initial_mmu
66 /* We now have the lower 16 Meg mapped into TLB entries, and the caches
67 * ready to work.
68 */
69 turn_on_mmu:
70 lis r0,MSR_KERNEL@h
71 ori r0,r0,MSR_KERNEL@l
72 mtspr SPRN_SRR1,r0
73 lis r0,start_here@h
74 ori r0,r0,start_here@l
75 mtspr SPRN_SRR0,r0
76 SYNC
77 rfi /* enables MMU */
78 b . /* prevent prefetch past rfi */
80 /*
81 * This area is used for temporarily saving registers during the
82 * critical exception prolog.
83 */
84 . = 0xc0
85 crit_save:
86 _ENTRY(crit_r10)
87 .space 4
88 _ENTRY(crit_r11)
89 .space 4
90 _ENTRY(crit_srr0)
91 .space 4
92 _ENTRY(crit_srr1)
93 .space 4
94 _ENTRY(saved_ksp_limit)
95 .space 4
97 /*
98 * Exception prolog for critical exceptions. This is a little different
99 * from the normal exception prolog above since a critical exception
100 * can potentially occur at any point during normal exception processing.
101 * Thus we cannot use the same SPRG registers as the normal prolog above.
102 * Instead we use a couple of words of memory at low physical addresses.
103 * This is OK since we don't support SMP on these processors.
104 */
105 #define CRITICAL_EXCEPTION_PROLOG \
106 stw r10,crit_r10@l(0); /* save two registers to work with */\
107 stw r11,crit_r11@l(0); \
108 mfcr r10; /* save CR in r10 for now */\
109 mfspr r11,SPRN_SRR3; /* check whether user or kernel */\
110 andi. r11,r11,MSR_PR; \
111 lis r11,critirq_ctx@ha; \
112 tophys(r11,r11); \
113 lwz r11,critirq_ctx@l(r11); \
114 beq 1f; \
115 /* COMING FROM USER MODE */ \
116 mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
117 lwz r11,TASK_STACK-THREAD(r11); /* this thread's kernel stack */\
118 1: addi r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm */\
119 tophys(r11,r11); \
120 stw r10,_CCR(r11); /* save various registers */\
121 stw r12,GPR12(r11); \
122 stw r9,GPR9(r11); \
123 mflr r10; \
124 stw r10,_LINK(r11); \
125 mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
126 stw r12,_DEAR(r11); /* since they may have had stuff */\
127 mfspr r9,SPRN_ESR; /* in them at the point where the */\
128 stw r9,_ESR(r11); /* exception was taken */\
129 mfspr r12,SPRN_SRR2; \
130 stw r1,GPR1(r11); \
131 mfspr r9,SPRN_SRR3; \
132 stw r1,0(r11); \
133 tovirt(r1,r11); \
134 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
135 stw r0,GPR0(r11); \
136 lis r10, STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */\
137 addi r10, r10, STACK_FRAME_REGS_MARKER@l; \
138 stw r10, 8(r11); \
139 SAVE_4GPRS(3, r11); \
140 SAVE_2GPRS(7, r11)
142 /*
143 * State at this point:
144 * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
145 * r10 saved in crit_r10 and in stack frame, trashed
146 * r11 saved in crit_r11 and in stack frame,
147 * now phys stack/exception frame pointer
148 * r12 saved in stack frame, now saved SRR2
149 * CR saved in stack frame, CR0.EQ = !SRR3.PR
150 * LR, DEAR, ESR in stack frame
151 * r1 saved in stack frame, now virt stack/excframe pointer
152 * r0, r3-r8 saved in stack frame
153 */
155 /*
156 * Exception vectors.
157 */
158 #define CRITICAL_EXCEPTION(n, label, hdlr) \
159 START_EXCEPTION(n, label); \
160 CRITICAL_EXCEPTION_PROLOG; \
161 addi r3,r1,STACK_FRAME_OVERHEAD; \
162 EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
163 crit_transfer_to_handler, ret_from_crit_exc)
165 /*
166 * 0x0100 - Critical Interrupt Exception
167 */
168 CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
170 /*
171 * 0x0200 - Machine Check Exception
172 */
173 CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
175 /*
176 * 0x0300 - Data Storage Exception
177 * This happens for just a few reasons. U0 set (but we don't do that),
178 * or zone protection fault (user violation, write to protected page).
179 * If this is just an update of modified status, we do that quickly
180 * and exit. Otherwise, we call heavywight functions to do the work.
181 */
182 START_EXCEPTION(0x0300, DataStorage)
183 mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
184 mtspr SPRN_SPRG_SCRATCH1, r11
185 #ifdef CONFIG_403GCX
186 stw r12, 0(r0)
187 stw r9, 4(r0)
188 mfcr r11
189 mfspr r12, SPRN_PID
190 stw r11, 8(r0)
191 stw r12, 12(r0)
192 #else
193 mtspr SPRN_SPRG_SCRATCH3, r12
194 mtspr SPRN_SPRG_SCRATCH4, r9
195 mfcr r11
196 mfspr r12, SPRN_PID
197 mtspr SPRN_SPRG_SCRATCH6, r11
198 mtspr SPRN_SPRG_SCRATCH5, r12
199 #endif
201 /* First, check if it was a zone fault (which means a user
202 * tried to access a kernel or read-protected page - always
203 * a SEGV). All other faults here must be stores, so no
204 * need to check ESR_DST as well. */
205 mfspr r10, SPRN_ESR
206 andis. r10, r10, ESR_DIZ@h
207 bne 2f
209 mfspr r10, SPRN_DEAR /* Get faulting address */
211 /* If we are faulting a kernel address, we have to use the
212 * kernel page tables.
213 */
214 lis r11, PAGE_OFFSET@h
215 cmplw r10, r11
216 blt+ 3f
217 lis r11, swapper_pg_dir@h
218 ori r11, r11, swapper_pg_dir@l
219 li r9, 0
220 mtspr SPRN_PID, r9 /* TLB will have 0 TID */
221 b 4f
223 /* Get the PGD for the current thread.
224 */
225 3:
226 mfspr r11,SPRN_SPRG_THREAD
227 lwz r11,PGDIR(r11)
228 4:
229 tophys(r11, r11)
230 rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
231 lwz r11, 0(r11) /* Get L1 entry */
232 rlwinm. r12, r11, 0, 0, 19 /* Extract L2 (pte) base address */
233 beq 2f /* Bail if no table */
235 rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
236 lwz r11, 0(r12) /* Get Linux PTE */
238 andi. r9, r11, _PAGE_RW /* Is it writeable? */
239 beq 2f /* Bail if not */
241 /* Update 'changed'.
242 */
243 ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
244 stw r11, 0(r12) /* Update Linux page table */
246 /* Most of the Linux PTE is ready to load into the TLB LO.
247 * We set ZSEL, where only the LS-bit determines user access.
248 * We set execute, because we don't have the granularity to
249 * properly set this at the page level (Linux problem).
250 * If shared is set, we cause a zero PID->TID load.
251 * Many of these bits are software only. Bits we don't set
252 * here we (properly should) assume have the appropriate value.
253 */
254 li r12, 0x0ce2
255 andc r11, r11, r12 /* Make sure 20, 21 are zero */
257 /* find the TLB index that caused the fault. It has to be here.
258 */
259 tlbsx r9, 0, r10
261 tlbwe r11, r9, TLB_DATA /* Load TLB LO */
263 /* Done...restore registers and get out of here.
264 */
265 #ifdef CONFIG_403GCX
266 lwz r12, 12(r0)
267 lwz r11, 8(r0)
268 mtspr SPRN_PID, r12
269 mtcr r11
270 lwz r9, 4(r0)
271 lwz r12, 0(r0)
272 #else
273 mfspr r12, SPRN_SPRG_SCRATCH5
274 mfspr r11, SPRN_SPRG_SCRATCH6
275 mtspr SPRN_PID, r12
276 mtcr r11
277 mfspr r9, SPRN_SPRG_SCRATCH4
278 mfspr r12, SPRN_SPRG_SCRATCH3
279 #endif
280 mfspr r11, SPRN_SPRG_SCRATCH1
281 mfspr r10, SPRN_SPRG_SCRATCH0
282 PPC405_ERR77_SYNC
283 rfi /* Should sync shadow TLBs */
284 b . /* prevent prefetch past rfi */
286 2:
287 /* The bailout. Restore registers to pre-exception conditions
288 * and call the heavyweights to help us out.
289 */
290 #ifdef CONFIG_403GCX
291 lwz r12, 12(r0)
292 lwz r11, 8(r0)
293 mtspr SPRN_PID, r12
294 mtcr r11
295 lwz r9, 4(r0)
296 lwz r12, 0(r0)
297 #else
298 mfspr r12, SPRN_SPRG_SCRATCH5
299 mfspr r11, SPRN_SPRG_SCRATCH6
300 mtspr SPRN_PID, r12
301 mtcr r11
302 mfspr r9, SPRN_SPRG_SCRATCH4
303 mfspr r12, SPRN_SPRG_SCRATCH3
304 #endif
305 mfspr r11, SPRN_SPRG_SCRATCH1
306 mfspr r10, SPRN_SPRG_SCRATCH0
307 b DataAccess
309 /*
310 * 0x0400 - Instruction Storage Exception
311 * This is caused by a fetch from non-execute or guarded pages.
312 */
313 START_EXCEPTION(0x0400, InstructionAccess)
314 EXCEPTION_PROLOG
315 mr r4,r12 /* Pass SRR0 as arg2 */
316 li r5,0 /* Pass zero as arg3 */
317 EXC_XFER_LITE(0x400, handle_page_fault)
319 /* 0x0500 - External Interrupt Exception */
320 EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
322 /* 0x0600 - Alignment Exception */
323 START_EXCEPTION(0x0600, Alignment)
324 EXCEPTION_PROLOG
325 mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */
326 stw r4,_DEAR(r11)
327 addi r3,r1,STACK_FRAME_OVERHEAD
328 EXC_XFER_STD(0x600, alignment_exception)
330 /* 0x0700 - Program Exception */
331 START_EXCEPTION(0x0700, ProgramCheck)
332 EXCEPTION_PROLOG
333 mfspr r4,SPRN_ESR /* Grab the ESR and save it */
334 stw r4,_ESR(r11)
335 addi r3,r1,STACK_FRAME_OVERHEAD
336 EXC_XFER_STD(0x700, program_check_exception)
338 EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_STD)
339 EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_STD)
340 EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_STD)
341 EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_STD)
343 /* 0x0C00 - System Call Exception */
344 START_EXCEPTION(0x0C00, SystemCall)
345 SYSCALL_ENTRY 0xc00
347 EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_STD)
348 EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_STD)
349 EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_STD)
351 /* 0x1000 - Programmable Interval Timer (PIT) Exception */
352 . = 0x1000
353 b Decrementer
355 /* 0x1010 - Fixed Interval Timer (FIT) Exception
356 */
357 . = 0x1010
358 b FITException
360 /* 0x1020 - Watchdog Timer (WDT) Exception
361 */
362 . = 0x1020
363 b WDTException
365 /* 0x1100 - Data TLB Miss Exception
366 * As the name implies, translation is not in the MMU, so search the
367 * page tables and fix it. The only purpose of this function is to
368 * load TLB entries from the page table if they exist.
369 */
370 START_EXCEPTION(0x1100, DTLBMiss)
371 mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
372 mtspr SPRN_SPRG_SCRATCH1, r11
373 #ifdef CONFIG_403GCX
374 stw r12, 0(r0)
375 stw r9, 4(r0)
376 mfcr r11
377 mfspr r12, SPRN_PID
378 stw r11, 8(r0)
379 stw r12, 12(r0)
380 #else
381 mtspr SPRN_SPRG_SCRATCH3, r12
382 mtspr SPRN_SPRG_SCRATCH4, r9
383 mfcr r11
384 mfspr r12, SPRN_PID
385 mtspr SPRN_SPRG_SCRATCH6, r11
386 mtspr SPRN_SPRG_SCRATCH5, r12
387 #endif
388 mfspr r10, SPRN_DEAR /* Get faulting address */
390 /* If we are faulting a kernel address, we have to use the
391 * kernel page tables.
392 */
393 lis r11, PAGE_OFFSET@h
394 cmplw r10, r11
395 blt+ 3f
396 lis r11, swapper_pg_dir@h
397 ori r11, r11, swapper_pg_dir@l
398 li r9, 0
399 mtspr SPRN_PID, r9 /* TLB will have 0 TID */
400 b 4f
402 /* Get the PGD for the current thread.
403 */
404 3:
405 mfspr r11,SPRN_SPRG_THREAD
406 lwz r11,PGDIR(r11)
407 4:
408 tophys(r11, r11)
409 rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
410 lwz r12, 0(r11) /* Get L1 entry */
411 andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
412 beq 2f /* Bail if no table */
414 rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
415 lwz r11, 0(r12) /* Get Linux PTE */
416 andi. r9, r11, _PAGE_PRESENT
417 beq 5f
419 ori r11, r11, _PAGE_ACCESSED
420 stw r11, 0(r12)
422 /* Create TLB tag. This is the faulting address plus a static
423 * set of bits. These are size, valid, E, U0.
424 */
425 li r12, 0x00c0
426 rlwimi r10, r12, 0, 20, 31
428 b finish_tlb_load
430 2: /* Check for possible large-page pmd entry */
431 rlwinm. r9, r12, 2, 22, 24
432 beq 5f
434 /* Create TLB tag. This is the faulting address, plus a static
435 * set of bits (valid, E, U0) plus the size from the PMD.
436 */
437 ori r9, r9, 0x40
438 rlwimi r10, r9, 0, 20, 31
439 mr r11, r12
441 b finish_tlb_load
443 5:
444 /* The bailout. Restore registers to pre-exception conditions
445 * and call the heavyweights to help us out.
446 */
447 #ifdef CONFIG_403GCX
448 lwz r12, 12(r0)
449 lwz r11, 8(r0)
450 mtspr SPRN_PID, r12
451 mtcr r11
452 lwz r9, 4(r0)
453 lwz r12, 0(r0)
454 #else
455 mfspr r12, SPRN_SPRG_SCRATCH5
456 mfspr r11, SPRN_SPRG_SCRATCH6
457 mtspr SPRN_PID, r12
458 mtcr r11
459 mfspr r9, SPRN_SPRG_SCRATCH4
460 mfspr r12, SPRN_SPRG_SCRATCH3
461 #endif
462 mfspr r11, SPRN_SPRG_SCRATCH1
463 mfspr r10, SPRN_SPRG_SCRATCH0
464 b DataAccess
466 /* 0x1200 - Instruction TLB Miss Exception
467 * Nearly the same as above, except we get our information from different
468 * registers and bailout to a different point.
469 */
470 START_EXCEPTION(0x1200, ITLBMiss)
471 mtspr SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
472 mtspr SPRN_SPRG_SCRATCH1, r11
473 #ifdef CONFIG_403GCX
474 stw r12, 0(r0)
475 stw r9, 4(r0)
476 mfcr r11
477 mfspr r12, SPRN_PID
478 stw r11, 8(r0)
479 stw r12, 12(r0)
480 #else
481 mtspr SPRN_SPRG_SCRATCH3, r12
482 mtspr SPRN_SPRG_SCRATCH4, r9
483 mfcr r11
484 mfspr r12, SPRN_PID
485 mtspr SPRN_SPRG_SCRATCH6, r11
486 mtspr SPRN_SPRG_SCRATCH5, r12
487 #endif
488 mfspr r10, SPRN_SRR0 /* Get faulting address */
490 /* If we are faulting a kernel address, we have to use the
491 * kernel page tables.
492 */
493 lis r11, PAGE_OFFSET@h
494 cmplw r10, r11
495 blt+ 3f
496 lis r11, swapper_pg_dir@h
497 ori r11, r11, swapper_pg_dir@l
498 li r9, 0
499 mtspr SPRN_PID, r9 /* TLB will have 0 TID */
500 b 4f
502 /* Get the PGD for the current thread.
503 */
504 3:
505 mfspr r11,SPRN_SPRG_THREAD
506 lwz r11,PGDIR(r11)
507 4:
508 tophys(r11, r11)
509 rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
510 lwz r12, 0(r11) /* Get L1 entry */
511 andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
512 beq 2f /* Bail if no table */
514 rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
515 lwz r11, 0(r12) /* Get Linux PTE */
516 andi. r9, r11, _PAGE_PRESENT
517 beq 5f
519 ori r11, r11, _PAGE_ACCESSED
520 stw r11, 0(r12)
522 /* Create TLB tag. This is the faulting address plus a static
523 * set of bits. These are size, valid, E, U0.
524 */
525 li r12, 0x00c0
526 rlwimi r10, r12, 0, 20, 31
528 b finish_tlb_load
530 2: /* Check for possible large-page pmd entry */
531 rlwinm. r9, r12, 2, 22, 24
532 beq 5f
534 /* Create TLB tag. This is the faulting address, plus a static
535 * set of bits (valid, E, U0) plus the size from the PMD.
536 */
537 ori r9, r9, 0x40
538 rlwimi r10, r9, 0, 20, 31
539 mr r11, r12
541 b finish_tlb_load
543 5:
544 /* The bailout. Restore registers to pre-exception conditions
545 * and call the heavyweights to help us out.
546 */
547 #ifdef CONFIG_403GCX
548 lwz r12, 12(r0)
549 lwz r11, 8(r0)
550 mtspr SPRN_PID, r12
551 mtcr r11
552 lwz r9, 4(r0)
553 lwz r12, 0(r0)
554 #else
555 mfspr r12, SPRN_SPRG_SCRATCH5
556 mfspr r11, SPRN_SPRG_SCRATCH6
557 mtspr SPRN_PID, r12
558 mtcr r11
559 mfspr r9, SPRN_SPRG_SCRATCH4
560 mfspr r12, SPRN_SPRG_SCRATCH3
561 #endif
562 mfspr r11, SPRN_SPRG_SCRATCH1
563 mfspr r10, SPRN_SPRG_SCRATCH0
564 b InstructionAccess
566 EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_STD)
567 EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_STD)
568 EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_STD)
569 EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_STD)
570 #ifdef CONFIG_IBM405_ERR51
571 /* 405GP errata 51 */
572 START_EXCEPTION(0x1700, Trap_17)
573 b DTLBMiss
574 #else
575 EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_STD)
576 #endif
577 EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_STD)
578 EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_STD)
579 EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_STD)
580 EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_STD)
581 EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_STD)
582 EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_STD)
583 EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_STD)
584 EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_STD)
586 /* Check for a single step debug exception while in an exception
587 * handler before state has been saved. This is to catch the case
588 * where an instruction that we are trying to single step causes
589 * an exception (eg ITLB/DTLB miss) and thus the first instruction of
590 * the exception handler generates a single step debug exception.
591 *
592 * If we get a debug trap on the first instruction of an exception handler,
593 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
594 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
595 * The exception handler was handling a non-critical interrupt, so it will
596 * save (and later restore) the MSR via SPRN_SRR1, which will still have
597 * the MSR_DE bit set.
598 */
599 /* 0x2000 - Debug Exception */
600 START_EXCEPTION(0x2000, DebugTrap)
601 CRITICAL_EXCEPTION_PROLOG
603 /*
604 * If this is a single step or branch-taken exception in an
605 * exception entry sequence, it was probably meant to apply to
606 * the code where the exception occurred (since exception entry
607 * doesn't turn off DE automatically). We simulate the effect
608 * of turning off DE on entry to an exception handler by turning
609 * off DE in the SRR3 value and clearing the debug status.
610 */
611 mfspr r10,SPRN_DBSR /* check single-step/branch taken */
612 andis. r10,r10,DBSR_IC@h
613 beq+ 2f
615 andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */
616 beq 1f /* branch and fix it up */
618 mfspr r10,SPRN_SRR2 /* Faulting instruction address */
619 cmplwi r10,0x2100
620 bgt+ 2f /* address above exception vectors */
622 /* here it looks like we got an inappropriate debug exception. */
623 1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */
624 lis r10,DBSR_IC@h /* clear the IC event */
625 mtspr SPRN_DBSR,r10
626 /* restore state and get out */
627 lwz r10,_CCR(r11)
628 lwz r0,GPR0(r11)
629 lwz r1,GPR1(r11)
630 mtcrf 0x80,r10
631 mtspr SPRN_SRR2,r12
632 mtspr SPRN_SRR3,r9
633 lwz r9,GPR9(r11)
634 lwz r12,GPR12(r11)
635 lwz r10,crit_r10@l(0)
636 lwz r11,crit_r11@l(0)
637 PPC405_ERR77_SYNC
638 rfci
639 b .
641 /* continue normal handling for a critical exception... */
642 2: mfspr r4,SPRN_DBSR
643 addi r3,r1,STACK_FRAME_OVERHEAD
644 EXC_XFER_TEMPLATE(DebugException, 0x2002, \
645 (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
646 crit_transfer_to_handler, ret_from_crit_exc)
648 /* Programmable Interval Timer (PIT) Exception. (from 0x1000) */
649 Decrementer:
650 EXCEPTION_PROLOG
651 lis r0,TSR_PIS@h
652 mtspr SPRN_TSR,r0 /* Clear the PIT exception */
653 addi r3,r1,STACK_FRAME_OVERHEAD
654 EXC_XFER_LITE(0x1000, timer_interrupt)
656 /* Fixed Interval Timer (FIT) Exception. (from 0x1010) */
657 FITException:
658 EXCEPTION_PROLOG
659 addi r3,r1,STACK_FRAME_OVERHEAD;
660 EXC_XFER_STD(0x1010, unknown_exception)
662 /* Watchdog Timer (WDT) Exception. (from 0x1020) */
663 WDTException:
664 CRITICAL_EXCEPTION_PROLOG;
665 addi r3,r1,STACK_FRAME_OVERHEAD;
666 EXC_XFER_TEMPLATE(WatchdogException, 0x1020+2,
667 (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)),
668 crit_transfer_to_handler, ret_from_crit_exc)
670 /*
671 * The other Data TLB exceptions bail out to this point
672 * if they can't resolve the lightweight TLB fault.
673 */
674 DataAccess:
675 EXCEPTION_PROLOG
676 mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
677 stw r5,_ESR(r11)
678 mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
679 EXC_XFER_LITE(0x300, handle_page_fault)
681 /* Other PowerPC processors, namely those derived from the 6xx-series
682 * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
683 * However, for the 4xx-series processors these are neither defined nor
684 * reserved.
685 */
687 /* Damn, I came up one instruction too many to fit into the
688 * exception space :-). Both the instruction and data TLB
689 * miss get to this point to load the TLB.
690 * r10 - TLB_TAG value
691 * r11 - Linux PTE
692 * r12, r9 - available to use
693 * PID - loaded with proper value when we get here
694 * Upon exit, we reload everything and RFI.
695 * Actually, it will fit now, but oh well.....a common place
696 * to load the TLB.
697 */
698 tlb_4xx_index:
699 .long 0
700 finish_tlb_load:
701 /* load the next available TLB index.
702 */
703 lwz r9, tlb_4xx_index@l(0)
704 addi r9, r9, 1
705 andi. r9, r9, (PPC40X_TLB_SIZE-1)
706 stw r9, tlb_4xx_index@l(0)
708 6:
709 /*
710 * Clear out the software-only bits in the PTE to generate the
711 * TLB_DATA value. These are the bottom 2 bits of the RPM, the
712 * top 3 bits of the zone field, and M.
713 */
714 li r12, 0x0ce2
715 andc r11, r11, r12
717 tlbwe r11, r9, TLB_DATA /* Load TLB LO */
718 tlbwe r10, r9, TLB_TAG /* Load TLB HI */
720 /* Done...restore registers and get out of here.
721 */
722 #ifdef CONFIG_403GCX
723 lwz r12, 12(r0)
724 lwz r11, 8(r0)
725 mtspr SPRN_PID, r12
726 mtcr r11
727 lwz r9, 4(r0)
728 lwz r12, 0(r0)
729 #else
730 mfspr r12, SPRN_SPRG_SCRATCH5
731 mfspr r11, SPRN_SPRG_SCRATCH6
732 mtspr SPRN_PID, r12
733 mtcr r11
734 mfspr r9, SPRN_SPRG_SCRATCH4
735 mfspr r12, SPRN_SPRG_SCRATCH3
736 #endif
737 mfspr r11, SPRN_SPRG_SCRATCH1
738 mfspr r10, SPRN_SPRG_SCRATCH0
739 PPC405_ERR77_SYNC
740 rfi /* Should sync shadow TLBs */
741 b . /* prevent prefetch past rfi */
743 /* This is where the main kernel code starts.
744 */
745 start_here:
747 /* ptr to current */
748 lis r2,init_task@h
749 ori r2,r2,init_task@l
751 /* ptr to phys current thread */
752 tophys(r4,r2)
753 addi r4,r4,THREAD /* init task's THREAD */
754 mtspr SPRN_SPRG_THREAD,r4
756 /* stack */
757 lis r1,init_thread_union@ha
758 addi r1,r1,init_thread_union@l
759 li r0,0
760 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
762 bl early_init /* We have to do this with MMU on */
764 /*
765 * Decide what sort of machine this is and initialize the MMU.
766 */
767 #ifdef CONFIG_KASAN
768 bl kasan_early_init
769 #endif
770 li r3,0
771 mr r4,r31
772 bl machine_init
773 bl MMU_init
775 /* Go back to running unmapped so we can load up new values
776 * and change to using our exception vectors.
777 * On the 4xx, all we have to do is invalidate the TLB to clear
778 * the old 16M byte TLB mappings.
779 */
780 lis r4,2f@h
781 ori r4,r4,2f@l
782 tophys(r4,r4)
783 lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
784 ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
785 mtspr SPRN_SRR0,r4
786 mtspr SPRN_SRR1,r3
787 rfi
788 b . /* prevent prefetch past rfi */
790 /* Load up the kernel context */
791 2:
792 sync /* Flush to memory before changing TLB */
793 tlbia
794 isync /* Flush shadow TLBs */
796 /* set up the PTE pointers for the Abatron bdiGDB.
797 */
798 lis r6, swapper_pg_dir@h
799 ori r6, r6, swapper_pg_dir@l
800 lis r5, abatron_pteptrs@h
801 ori r5, r5, abatron_pteptrs@l
802 stw r5, 0xf0(r0) /* Must match your Abatron config file */
803 tophys(r5,r5)
804 stw r6, 0(r5)
806 /* Now turn on the MMU for real! */
807 lis r4,MSR_KERNEL@h
808 ori r4,r4,MSR_KERNEL@l
809 lis r3,start_kernel@h
810 ori r3,r3,start_kernel@l
811 mtspr SPRN_SRR0,r3
812 mtspr SPRN_SRR1,r4
813 rfi /* enable MMU and jump to start_kernel */
814 b . /* prevent prefetch past rfi */
816 /* Set up the initial MMU state so we can do the first level of
817 * kernel initialization. This maps the first 16 MBytes of memory 1:1
818 * virtual to physical and more importantly sets the cache mode.
819 */
820 initial_mmu:
821 tlbia /* Invalidate all TLB entries */
822 isync
824 /* We should still be executing code at physical address 0x0000xxxx
825 * at this point. However, start_here is at virtual address
826 * 0xC000xxxx. So, set up a TLB mapping to cover this once
827 * translation is enabled.
828 */
830 lis r3,KERNELBASE@h /* Load the kernel virtual address */
831 ori r3,r3,KERNELBASE@l
832 tophys(r4,r3) /* Load the kernel physical address */
834 iccci r0,r3 /* Invalidate the i-cache before use */
836 /* Load the kernel PID.
837 */
838 li r0,0
839 mtspr SPRN_PID,r0
840 sync
842 /* Configure and load one entry into TLB slots 63 */
843 clrrwi r4,r4,10 /* Mask off the real page number */
844 ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
846 clrrwi r3,r3,10 /* Mask off the effective page number */
847 ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
849 li r0,63 /* TLB slot 63 */
851 tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
852 tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
854 isync
856 /* Establish the exception vector base
857 */
858 lis r4,KERNELBASE@h /* EVPR only uses the high 16-bits */
859 tophys(r0,r4) /* Use the physical address */
860 mtspr SPRN_EVPR,r0
862 blr
864 _GLOBAL(abort)
865 mfspr r13,SPRN_DBCR0
866 oris r13,r13,DBCR0_RST_SYSTEM@h
867 mtspr SPRN_DBCR0,r13
869 _GLOBAL(set_context)
871 #ifdef CONFIG_BDI_SWITCH
872 /* Context switch the PTE pointer for the Abatron BDI2000.
873 * The PGDIR is the second parameter.
874 */
875 lis r5, abatron_pteptrs@ha
876 stw r4, abatron_pteptrs@l + 0x4(r5)
877 #endif
878 sync
879 mtspr SPRN_PID,r3
880 isync /* Need an isync to flush shadow */
881 /* TLBs after changing PID */
882 blr
884 /* We put a few things here that have to be page-aligned. This stuff
885 * goes at the beginning of the data segment, which is page-aligned.
886 */
887 .data
888 .align 12
889 .globl sdata
890 sdata:
891 .globl empty_zero_page
892 empty_zero_page:
893 .space 4096
894 EXPORT_SYMBOL(empty_zero_page)
895 .globl swapper_pg_dir
896 swapper_pg_dir:
897 .space PGD_TABLE_SIZE
899 /* Room for two PTE pointers, usually the kernel and current user pointers
900 * to their respective root page table.
901 */
902 abatron_pteptrs:
903 .space 8