treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / cpufreq / kirkwood-cpufreq.c
blob70ad8fe1d78b9462aba6d522b0e313bf8a406da2
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * kirkwood_freq.c: cpufreq driver for the Marvell kirkwood
5 * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch>
6 */
8 #include <linux/kernel.h>
9 #include <linux/module.h>
10 #include <linux/clk.h>
11 #include <linux/cpufreq.h>
12 #include <linux/of_device.h>
13 #include <linux/platform_device.h>
14 #include <linux/io.h>
15 #include <asm/proc-fns.h>
17 #define CPU_SW_INT_BLK BIT(28)
19 static struct priv
21 struct clk *cpu_clk;
22 struct clk *ddr_clk;
23 struct clk *powersave_clk;
24 struct device *dev;
25 void __iomem *base;
26 } priv;
28 #define STATE_CPU_FREQ 0x01
29 #define STATE_DDR_FREQ 0x02
32 * Kirkwood can swap the clock to the CPU between two clocks:
34 * - cpu clk
35 * - ddr clk
37 * The frequencies are set at runtime before registering this table.
39 static struct cpufreq_frequency_table kirkwood_freq_table[] = {
40 {0, STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */
41 {0, STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */
42 {0, 0, CPUFREQ_TABLE_END},
45 static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
47 return clk_get_rate(priv.powersave_clk) / 1000;
50 static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
51 unsigned int index)
53 unsigned int state = kirkwood_freq_table[index].driver_data;
54 unsigned long reg;
56 local_irq_disable();
58 /* Disable interrupts to the CPU */
59 reg = readl_relaxed(priv.base);
60 reg |= CPU_SW_INT_BLK;
61 writel_relaxed(reg, priv.base);
63 switch (state) {
64 case STATE_CPU_FREQ:
65 clk_set_parent(priv.powersave_clk, priv.cpu_clk);
66 break;
67 case STATE_DDR_FREQ:
68 clk_set_parent(priv.powersave_clk, priv.ddr_clk);
69 break;
72 /* Wait-for-Interrupt, while the hardware changes frequency */
73 cpu_do_idle();
75 /* Enable interrupts to the CPU */
76 reg = readl_relaxed(priv.base);
77 reg &= ~CPU_SW_INT_BLK;
78 writel_relaxed(reg, priv.base);
80 local_irq_enable();
82 return 0;
85 /* Module init and exit code */
86 static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy)
88 cpufreq_generic_init(policy, kirkwood_freq_table, 5000);
89 return 0;
92 static struct cpufreq_driver kirkwood_cpufreq_driver = {
93 .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
94 .get = kirkwood_cpufreq_get_cpu_frequency,
95 .verify = cpufreq_generic_frequency_table_verify,
96 .target_index = kirkwood_cpufreq_target,
97 .init = kirkwood_cpufreq_cpu_init,
98 .name = "kirkwood-cpufreq",
99 .attr = cpufreq_generic_attr,
102 static int kirkwood_cpufreq_probe(struct platform_device *pdev)
104 struct device_node *np;
105 int err;
107 priv.dev = &pdev->dev;
109 priv.base = devm_platform_ioremap_resource(pdev, 0);
110 if (IS_ERR(priv.base))
111 return PTR_ERR(priv.base);
113 np = of_cpu_device_node_get(0);
114 if (!np) {
115 dev_err(&pdev->dev, "failed to get cpu device node\n");
116 return -ENODEV;
119 priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk");
120 if (IS_ERR(priv.cpu_clk)) {
121 dev_err(priv.dev, "Unable to get cpuclk\n");
122 err = PTR_ERR(priv.cpu_clk);
123 goto out_node;
126 err = clk_prepare_enable(priv.cpu_clk);
127 if (err) {
128 dev_err(priv.dev, "Unable to prepare cpuclk\n");
129 goto out_node;
132 kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000;
134 priv.ddr_clk = of_clk_get_by_name(np, "ddrclk");
135 if (IS_ERR(priv.ddr_clk)) {
136 dev_err(priv.dev, "Unable to get ddrclk\n");
137 err = PTR_ERR(priv.ddr_clk);
138 goto out_cpu;
141 err = clk_prepare_enable(priv.ddr_clk);
142 if (err) {
143 dev_err(priv.dev, "Unable to prepare ddrclk\n");
144 goto out_cpu;
146 kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000;
148 priv.powersave_clk = of_clk_get_by_name(np, "powersave");
149 if (IS_ERR(priv.powersave_clk)) {
150 dev_err(priv.dev, "Unable to get powersave\n");
151 err = PTR_ERR(priv.powersave_clk);
152 goto out_ddr;
154 err = clk_prepare_enable(priv.powersave_clk);
155 if (err) {
156 dev_err(priv.dev, "Unable to prepare powersave clk\n");
157 goto out_ddr;
160 err = cpufreq_register_driver(&kirkwood_cpufreq_driver);
161 if (err) {
162 dev_err(priv.dev, "Failed to register cpufreq driver\n");
163 goto out_powersave;
166 of_node_put(np);
167 return 0;
169 out_powersave:
170 clk_disable_unprepare(priv.powersave_clk);
171 out_ddr:
172 clk_disable_unprepare(priv.ddr_clk);
173 out_cpu:
174 clk_disable_unprepare(priv.cpu_clk);
175 out_node:
176 of_node_put(np);
178 return err;
181 static int kirkwood_cpufreq_remove(struct platform_device *pdev)
183 cpufreq_unregister_driver(&kirkwood_cpufreq_driver);
185 clk_disable_unprepare(priv.powersave_clk);
186 clk_disable_unprepare(priv.ddr_clk);
187 clk_disable_unprepare(priv.cpu_clk);
189 return 0;
192 static struct platform_driver kirkwood_cpufreq_platform_driver = {
193 .probe = kirkwood_cpufreq_probe,
194 .remove = kirkwood_cpufreq_remove,
195 .driver = {
196 .name = "kirkwood-cpufreq",
200 module_platform_driver(kirkwood_cpufreq_platform_driver);
202 MODULE_LICENSE("GPL v2");
203 MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
204 MODULE_DESCRIPTION("cpufreq driver for Marvell's kirkwood CPU");
205 MODULE_ALIAS("platform:kirkwood-cpufreq");