treewide: remove redundant IS_ERR() before error code check

[linux/fpc-iii.git] / drivers / firmware / arm_scmi / driver.c

// SPDX-License-Identifier: GPL-2.0
/*
 * System Control and Management Interface (SCMI) Message Protocol driver
 *
 * SCMI Message Protocol is used between the System Control Processor(SCP)
 * and the Application Processors(AP). The Message Handling Unit(MHU)
 * provides a mechanism for inter-processor communication between SCP's
 * Cortex M3 and AP.
 *
 * SCP offers control and management of the core/cluster power states,
 * various power domain DVFS including the core/cluster, certain system
 * clocks configuration, thermal sensors and many others.
 *
 * Copyright (C) 2018 ARM Ltd.
 */

#include <linux/bitmap.h>
#include <linux/export.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/ktime.h>
#include <linux/mailbox_client.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/processor.h>
#include <linux/semaphore.h>
#include <linux/slab.h>

#include "common.h"

#define MSG_ID_MASK             GENMASK(7, 0)
#define MSG_XTRACT_ID(hdr)      FIELD_GET(MSG_ID_MASK, (hdr))
#define MSG_TYPE_MASK           GENMASK(9, 8)
#define MSG_XTRACT_TYPE(hdr)    FIELD_GET(MSG_TYPE_MASK, (hdr))
#define MSG_TYPE_COMMAND        0
#define MSG_TYPE_DELAYED_RESP   2
#define MSG_TYPE_NOTIFICATION   3
#define MSG_PROTOCOL_ID_MASK    GENMASK(17, 10)
#define MSG_XTRACT_PROT_ID(hdr) FIELD_GET(MSG_PROTOCOL_ID_MASK, (hdr))
#define MSG_TOKEN_ID_MASK       GENMASK(27, 18)
#define MSG_XTRACT_TOKEN(hdr)   FIELD_GET(MSG_TOKEN_ID_MASK, (hdr))
#define MSG_TOKEN_MAX           (MSG_XTRACT_TOKEN(MSG_TOKEN_ID_MASK) + 1)

enum scmi_error_codes {
        SCMI_SUCCESS = 0,       /* Success */
        SCMI_ERR_SUPPORT = -1,  /* Not supported */
        SCMI_ERR_PARAMS = -2,   /* Invalid Parameters */
        SCMI_ERR_ACCESS = -3,   /* Invalid access/permission denied */
        SCMI_ERR_ENTRY = -4,    /* Not found */
        SCMI_ERR_RANGE = -5,    /* Value out of range */
        SCMI_ERR_BUSY = -6,     /* Device busy */
        SCMI_ERR_COMMS = -7,    /* Communication Error */
        SCMI_ERR_GENERIC = -8,  /* Generic Error */
        SCMI_ERR_HARDWARE = -9, /* Hardware Error */
        SCMI_ERR_PROTOCOL = -10,/* Protocol Error */
        SCMI_ERR_MAX
};

/* List of all SCMI devices active in system */
static LIST_HEAD(scmi_list);
/* Protection for the entire list */
static DEFINE_MUTEX(scmi_list_mutex);

/**
 * struct scmi_xfers_info - Structure to manage transfer information
 *
 * @xfer_block: Preallocated Message array
 * @xfer_alloc_table: Bitmap table for allocated messages.
 *      Index of this bitmap table is also used for message
 *      sequence identifier.
 * @xfer_lock: Protection for message allocation
 */
struct scmi_xfers_info {
        struct scmi_xfer *xfer_block;
        unsigned long *xfer_alloc_table;
        spinlock_t xfer_lock;
};

/**
 * struct scmi_desc - Description of SoC integration
 *
 * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds)
 * @max_msg: Maximum number of messages that can be pending
 *      simultaneously in the system
 * @max_msg_size: Maximum size of data per message that can be handled.
 */
struct scmi_desc {
        int max_rx_timeout_ms;
        int max_msg;
        int max_msg_size;
};

/**
 * struct scmi_chan_info - Structure representing a SCMI channel information
 *
 * @cl: Mailbox Client
 * @chan: Transmit/Receive mailbox channel
 * @payload: Transmit/Receive mailbox channel payload area
 * @dev: Reference to device in the SCMI hierarchy corresponding to this
 *       channel
 * @handle: Pointer to SCMI entity handle
 */
struct scmi_chan_info {
        struct mbox_client cl;
        struct mbox_chan *chan;
        void __iomem *payload;
        struct device *dev;
        struct scmi_handle *handle;
};

/**
 * struct scmi_info - Structure representing a SCMI instance
 *
 * @dev: Device pointer
 * @desc: SoC description for this instance
 * @handle: Instance of SCMI handle to send to clients
 * @version: SCMI revision information containing protocol version,
 *      implementation version and (sub-)vendor identification.
 * @tx_minfo: Universal Transmit Message management info
 * @tx_idr: IDR object to map protocol id to Tx channel info pointer
 * @rx_idr: IDR object to map protocol id to Rx channel info pointer
 * @protocols_imp: List of protocols implemented, currently maximum of
 *      MAX_PROTOCOLS_IMP elements allocated by the base protocol
 * @node: List head
 * @users: Number of users of this instance
 */
struct scmi_info {
        struct device *dev;
        const struct scmi_desc *desc;
        struct scmi_revision_info version;
        struct scmi_handle handle;
        struct scmi_xfers_info tx_minfo;
        struct idr tx_idr;
        struct idr rx_idr;
        u8 *protocols_imp;
        struct list_head node;
        int users;
};

#define client_to_scmi_chan_info(c) container_of(c, struct scmi_chan_info, cl)
#define handle_to_scmi_info(h)  container_of(h, struct scmi_info, handle)

/*
 * SCMI specification requires all parameters, message headers, return
 * arguments or any protocol data to be expressed in little endian
 * format only.
 */
struct scmi_shared_mem {
        __le32 reserved;
        __le32 channel_status;
#define SCMI_SHMEM_CHAN_STAT_CHANNEL_ERROR      BIT(1)
#define SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE       BIT(0)
        __le32 reserved1[2];
        __le32 flags;
#define SCMI_SHMEM_FLAG_INTR_ENABLED    BIT(0)
        __le32 length;
        __le32 msg_header;
        u8 msg_payload[0];
};

static const int scmi_linux_errmap[] = {
        /* better than switch case as long as return value is continuous */
        0,                      /* SCMI_SUCCESS */
        -EOPNOTSUPP,            /* SCMI_ERR_SUPPORT */
        -EINVAL,                /* SCMI_ERR_PARAM */
        -EACCES,                /* SCMI_ERR_ACCESS */
        -ENOENT,                /* SCMI_ERR_ENTRY */
        -ERANGE,                /* SCMI_ERR_RANGE */
        -EBUSY,                 /* SCMI_ERR_BUSY */
        -ECOMM,                 /* SCMI_ERR_COMMS */
        -EIO,                   /* SCMI_ERR_GENERIC */
        -EREMOTEIO,             /* SCMI_ERR_HARDWARE */
        -EPROTO,                /* SCMI_ERR_PROTOCOL */
};

static inline int scmi_to_linux_errno(int errno)
{
        if (errno < SCMI_SUCCESS && errno > SCMI_ERR_MAX)
                return scmi_linux_errmap[-errno];
        return -EIO;
}

/**
 * scmi_dump_header_dbg() - Helper to dump a message header.
 *
 * @dev: Device pointer corresponding to the SCMI entity
 * @hdr: pointer to header.
 */
static inline void scmi_dump_header_dbg(struct device *dev,
                                        struct scmi_msg_hdr *hdr)
{
        dev_dbg(dev, "Message ID: %x Sequence ID: %x Protocol: %x\n",
                hdr->id, hdr->seq, hdr->protocol_id);
}

static void scmi_fetch_response(struct scmi_xfer *xfer,
                                struct scmi_shared_mem __iomem *mem)
{
        xfer->hdr.status = ioread32(mem->msg_payload);
        /* Skip the length of header and status in payload area i.e 8 bytes */
        xfer->rx.len = min_t(size_t, xfer->rx.len, ioread32(&mem->length) - 8);

        /* Take a copy to the rx buffer.. */
        memcpy_fromio(xfer->rx.buf, mem->msg_payload + 4, xfer->rx.len);
}

/**
 * pack_scmi_header() - packs and returns 32-bit header
 *
 * @hdr: pointer to header containing all the information on message id,
 *      protocol id and sequence id.
 *
 * Return: 32-bit packed message header to be sent to the platform.
 */
static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
{
        return FIELD_PREP(MSG_ID_MASK, hdr->id) |
                FIELD_PREP(MSG_TOKEN_ID_MASK, hdr->seq) |
                FIELD_PREP(MSG_PROTOCOL_ID_MASK, hdr->protocol_id);
}

/**
 * unpack_scmi_header() - unpacks and records message and protocol id
 *
 * @msg_hdr: 32-bit packed message header sent from the platform
 * @hdr: pointer to header to fetch message and protocol id.
 */
static inline void unpack_scmi_header(u32 msg_hdr, struct scmi_msg_hdr *hdr)
{
        hdr->id = MSG_XTRACT_ID(msg_hdr);
        hdr->protocol_id = MSG_XTRACT_PROT_ID(msg_hdr);
}

/**
 * scmi_tx_prepare() - mailbox client callback to prepare for the transfer
 *
 * @cl: client pointer
 * @m: mailbox message
 *
 * This function prepares the shared memory which contains the header and the
 * payload.
 */
static void scmi_tx_prepare(struct mbox_client *cl, void *m)
{
        struct scmi_xfer *t = m;
        struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
        struct scmi_shared_mem __iomem *mem = cinfo->payload;

        /*
         * Ideally channel must be free by now unless OS timeout last
         * request and platform continued to process the same, wait
         * until it releases the shared memory, otherwise we may endup
         * overwriting its response with new message payload or vice-versa
         */
        spin_until_cond(ioread32(&mem->channel_status) &
                        SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
        /* Mark channel busy + clear error */
        iowrite32(0x0, &mem->channel_status);
        iowrite32(t->hdr.poll_completion ? 0 : SCMI_SHMEM_FLAG_INTR_ENABLED,
                  &mem->flags);
        iowrite32(sizeof(mem->msg_header) + t->tx.len, &mem->length);
        iowrite32(pack_scmi_header(&t->hdr), &mem->msg_header);
        if (t->tx.buf)
                memcpy_toio(mem->msg_payload, t->tx.buf, t->tx.len);
}

/**
 * scmi_xfer_get() - Allocate one message
 *
 * @handle: Pointer to SCMI entity handle
 * @minfo: Pointer to Tx/Rx Message management info based on channel type
 *
 * Helper function which is used by various message functions that are
 * exposed to clients of this driver for allocating a message traffic event.
 *
 * This function can sleep depending on pending requests already in the system
 * for the SCMI entity. Further, this also holds a spinlock to maintain
 * integrity of internal data structures.
 *
 * Return: 0 if all went fine, else corresponding error.
 */
static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle,
                                       struct scmi_xfers_info *minfo)
{
        u16 xfer_id;
        struct scmi_xfer *xfer;
        unsigned long flags, bit_pos;
        struct scmi_info *info = handle_to_scmi_info(handle);

        /* Keep the locked section as small as possible */
        spin_lock_irqsave(&minfo->xfer_lock, flags);
        bit_pos = find_first_zero_bit(minfo->xfer_alloc_table,
                                      info->desc->max_msg);
        if (bit_pos == info->desc->max_msg) {
                spin_unlock_irqrestore(&minfo->xfer_lock, flags);
                return ERR_PTR(-ENOMEM);
        }
        set_bit(bit_pos, minfo->xfer_alloc_table);
        spin_unlock_irqrestore(&minfo->xfer_lock, flags);

        xfer_id = bit_pos;

        xfer = &minfo->xfer_block[xfer_id];
        xfer->hdr.seq = xfer_id;
        reinit_completion(&xfer->done);

        return xfer;
}

/**
 * __scmi_xfer_put() - Release a message
 *
 * @minfo: Pointer to Tx/Rx Message management info based on channel type
 * @xfer: message that was reserved by scmi_xfer_get
 *
 * This holds a spinlock to maintain integrity of internal data structures.
 */
static void
__scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer)
{
        unsigned long flags;

        /*
         * Keep the locked section as small as possible
         * NOTE: we might escape with smp_mb and no lock here..
         * but just be conservative and symmetric.
         */
        spin_lock_irqsave(&minfo->xfer_lock, flags);
        clear_bit(xfer->hdr.seq, minfo->xfer_alloc_table);
        spin_unlock_irqrestore(&minfo->xfer_lock, flags);
}

/**
 * scmi_rx_callback() - mailbox client callback for receive messages
 *
 * @cl: client pointer
 * @m: mailbox message
 *
 * Processes one received message to appropriate transfer information and
 * signals completion of the transfer.
 *
 * NOTE: This function will be invoked in IRQ context, hence should be
 * as optimal as possible.
 */
static void scmi_rx_callback(struct mbox_client *cl, void *m)
{
        u8 msg_type;
        u32 msg_hdr;
        u16 xfer_id;
        struct scmi_xfer *xfer;
        struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
        struct device *dev = cinfo->dev;
        struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
        struct scmi_xfers_info *minfo = &info->tx_minfo;
        struct scmi_shared_mem __iomem *mem = cinfo->payload;

        msg_hdr = ioread32(&mem->msg_header);
        msg_type = MSG_XTRACT_TYPE(msg_hdr);
        xfer_id = MSG_XTRACT_TOKEN(msg_hdr);

        if (msg_type == MSG_TYPE_NOTIFICATION)
                return; /* Notifications not yet supported */

        /* Are we even expecting this? */
        if (!test_bit(xfer_id, minfo->xfer_alloc_table)) {
                dev_err(dev, "message for %d is not expected!\n", xfer_id);
                return;
        }

        xfer = &minfo->xfer_block[xfer_id];

        scmi_dump_header_dbg(dev, &xfer->hdr);

        scmi_fetch_response(xfer, mem);

        if (msg_type == MSG_TYPE_DELAYED_RESP)
                complete(xfer->async_done);
        else
                complete(&xfer->done);
}

/**
 * scmi_xfer_put() - Release a transmit message
 *
 * @handle: Pointer to SCMI entity handle
 * @xfer: message that was reserved by scmi_xfer_get
 */
void scmi_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
{
        struct scmi_info *info = handle_to_scmi_info(handle);

        __scmi_xfer_put(&info->tx_minfo, xfer);
}

static bool
scmi_xfer_poll_done(const struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
{
        struct scmi_shared_mem __iomem *mem = cinfo->payload;
        u16 xfer_id = MSG_XTRACT_TOKEN(ioread32(&mem->msg_header));

        if (xfer->hdr.seq != xfer_id)
                return false;

        return ioread32(&mem->channel_status) &
                (SCMI_SHMEM_CHAN_STAT_CHANNEL_ERROR |
                SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
}

#define SCMI_MAX_POLL_TO_NS     (100 * NSEC_PER_USEC)

static bool scmi_xfer_done_no_timeout(const struct scmi_chan_info *cinfo,
                                      struct scmi_xfer *xfer, ktime_t stop)
{
        ktime_t __cur = ktime_get();

        return scmi_xfer_poll_done(cinfo, xfer) || ktime_after(__cur, stop);
}

/**
 * scmi_do_xfer() - Do one transfer
 *
 * @handle: Pointer to SCMI entity handle
 * @xfer: Transfer to initiate and wait for response
 *
 * Return: -ETIMEDOUT in case of no response, if transmit error,
 *      return corresponding error, else if all goes well,
 *      return 0.
 */
int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
{
        int ret;
        int timeout;
        struct scmi_info *info = handle_to_scmi_info(handle);
        struct device *dev = info->dev;
        struct scmi_chan_info *cinfo;

        cinfo = idr_find(&info->tx_idr, xfer->hdr.protocol_id);
        if (unlikely(!cinfo))
                return -EINVAL;

        ret = mbox_send_message(cinfo->chan, xfer);
        if (ret < 0) {
                dev_dbg(dev, "mbox send fail %d\n", ret);
                return ret;
        }

        /* mbox_send_message returns non-negative value on success, so reset */
        ret = 0;

        if (xfer->hdr.poll_completion) {
                ktime_t stop = ktime_add_ns(ktime_get(), SCMI_MAX_POLL_TO_NS);

                spin_until_cond(scmi_xfer_done_no_timeout(cinfo, xfer, stop));

                if (ktime_before(ktime_get(), stop))
                        scmi_fetch_response(xfer, cinfo->payload);
                else
                        ret = -ETIMEDOUT;
        } else {
                /* And we wait for the response. */
                timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms);
                if (!wait_for_completion_timeout(&xfer->done, timeout)) {
                        dev_err(dev, "mbox timed out in resp(caller: %pS)\n",
                                (void *)_RET_IP_);
                        ret = -ETIMEDOUT;
                }
        }

        if (!ret && xfer->hdr.status)
                ret = scmi_to_linux_errno(xfer->hdr.status);

        /*
         * NOTE: we might prefer not to need the mailbox ticker to manage the
         * transfer queueing since the protocol layer queues things by itself.
         * Unfortunately, we have to kick the mailbox framework after we have
         * received our message.
         */
        mbox_client_txdone(cinfo->chan, ret);

        return ret;
}

#define SCMI_MAX_RESPONSE_TIMEOUT       (2 * MSEC_PER_SEC)

/**
 * scmi_do_xfer_with_response() - Do one transfer and wait until the delayed
 *      response is received
 *
 * @handle: Pointer to SCMI entity handle
 * @xfer: Transfer to initiate and wait for response
 *
 * Return: -ETIMEDOUT in case of no delayed response, if transmit error,
 *      return corresponding error, else if all goes well, return 0.
 */
int scmi_do_xfer_with_response(const struct scmi_handle *handle,
                               struct scmi_xfer *xfer)
{
        int ret, timeout = msecs_to_jiffies(SCMI_MAX_RESPONSE_TIMEOUT);
        DECLARE_COMPLETION_ONSTACK(async_response);

        xfer->async_done = &async_response;

        ret = scmi_do_xfer(handle, xfer);
        if (!ret && !wait_for_completion_timeout(xfer->async_done, timeout))
                ret = -ETIMEDOUT;

        xfer->async_done = NULL;
        return ret;
}

/**
 * scmi_xfer_get_init() - Allocate and initialise one message for transmit
 *
 * @handle: Pointer to SCMI entity handle
 * @msg_id: Message identifier
 * @prot_id: Protocol identifier for the message
 * @tx_size: transmit message size
 * @rx_size: receive message size
 * @p: pointer to the allocated and initialised message
 *
 * This function allocates the message using @scmi_xfer_get and
 * initialise the header.
 *
 * Return: 0 if all went fine with @p pointing to message, else
 *      corresponding error.
 */
int scmi_xfer_get_init(const struct scmi_handle *handle, u8 msg_id, u8 prot_id,
                       size_t tx_size, size_t rx_size, struct scmi_xfer **p)
{
        int ret;
        struct scmi_xfer *xfer;
        struct scmi_info *info = handle_to_scmi_info(handle);
        struct scmi_xfers_info *minfo = &info->tx_minfo;
        struct device *dev = info->dev;

        /* Ensure we have sane transfer sizes */
        if (rx_size > info->desc->max_msg_size ||
            tx_size > info->desc->max_msg_size)
                return -ERANGE;

        xfer = scmi_xfer_get(handle, minfo);
        if (IS_ERR(xfer)) {
                ret = PTR_ERR(xfer);
                dev_err(dev, "failed to get free message slot(%d)\n", ret);
                return ret;
        }

        xfer->tx.len = tx_size;
        xfer->rx.len = rx_size ? : info->desc->max_msg_size;
        xfer->hdr.id = msg_id;
        xfer->hdr.protocol_id = prot_id;
        xfer->hdr.poll_completion = false;

        *p = xfer;

        return 0;
}

/**
 * scmi_version_get() - command to get the revision of the SCMI entity
 *
 * @handle: Pointer to SCMI entity handle
 * @protocol: Protocol identifier for the message
 * @version: Holds returned version of protocol.
 *
 * Updates the SCMI information in the internal data structure.
 *
 * Return: 0 if all went fine, else return appropriate error.
 */
int scmi_version_get(const struct scmi_handle *handle, u8 protocol,
                     u32 *version)
{
        int ret;
        __le32 *rev_info;
        struct scmi_xfer *t;

        ret = scmi_xfer_get_init(handle, PROTOCOL_VERSION, protocol, 0,
                                 sizeof(*version), &t);
        if (ret)
                return ret;

        ret = scmi_do_xfer(handle, t);
        if (!ret) {
                rev_info = t->rx.buf;
                *version = le32_to_cpu(*rev_info);
        }

        scmi_xfer_put(handle, t);
        return ret;
}

void scmi_setup_protocol_implemented(const struct scmi_handle *handle,
                                     u8 *prot_imp)
{
        struct scmi_info *info = handle_to_scmi_info(handle);

        info->protocols_imp = prot_imp;
}

static bool
scmi_is_protocol_implemented(const struct scmi_handle *handle, u8 prot_id)
{
        int i;
        struct scmi_info *info = handle_to_scmi_info(handle);

        if (!info->protocols_imp)
                return false;

        for (i = 0; i < MAX_PROTOCOLS_IMP; i++)
                if (info->protocols_imp[i] == prot_id)
                        return true;
        return false;
}

/**
 * scmi_handle_get() - Get the SCMI handle for a device
 *
 * @dev: pointer to device for which we want SCMI handle
 *
 * NOTE: The function does not track individual clients of the framework
 * and is expected to be maintained by caller of SCMI protocol library.
 * scmi_handle_put must be balanced with successful scmi_handle_get
 *
 * Return: pointer to handle if successful, NULL on error
 */
struct scmi_handle *scmi_handle_get(struct device *dev)
{
        struct list_head *p;
        struct scmi_info *info;
        struct scmi_handle *handle = NULL;

        mutex_lock(&scmi_list_mutex);
        list_for_each(p, &scmi_list) {
                info = list_entry(p, struct scmi_info, node);
                if (dev->parent == info->dev) {
                        handle = &info->handle;
                        info->users++;
                        break;
                }
        }
        mutex_unlock(&scmi_list_mutex);

        return handle;
}

/**
 * scmi_handle_put() - Release the handle acquired by scmi_handle_get
 *
 * @handle: handle acquired by scmi_handle_get
 *
 * NOTE: The function does not track individual clients of the framework
 * and is expected to be maintained by caller of SCMI protocol library.
 * scmi_handle_put must be balanced with successful scmi_handle_get
 *
 * Return: 0 is successfully released
 *      if null was passed, it returns -EINVAL;
 */
int scmi_handle_put(const struct scmi_handle *handle)
{
        struct scmi_info *info;

        if (!handle)
                return -EINVAL;

        info = handle_to_scmi_info(handle);
        mutex_lock(&scmi_list_mutex);
        if (!WARN_ON(!info->users))
                info->users--;
        mutex_unlock(&scmi_list_mutex);

        return 0;
}

static int scmi_xfer_info_init(struct scmi_info *sinfo)
{
        int i;
        struct scmi_xfer *xfer;
        struct device *dev = sinfo->dev;
        const struct scmi_desc *desc = sinfo->desc;
        struct scmi_xfers_info *info = &sinfo->tx_minfo;

        /* Pre-allocated messages, no more than what hdr.seq can support */
        if (WARN_ON(desc->max_msg >= MSG_TOKEN_MAX)) {
                dev_err(dev, "Maximum message of %d exceeds supported %ld\n",
                        desc->max_msg, MSG_TOKEN_MAX);
                return -EINVAL;
        }

        info->xfer_block = devm_kcalloc(dev, desc->max_msg,
                                        sizeof(*info->xfer_block), GFP_KERNEL);
        if (!info->xfer_block)
                return -ENOMEM;

        info->xfer_alloc_table = devm_kcalloc(dev, BITS_TO_LONGS(desc->max_msg),
                                              sizeof(long), GFP_KERNEL);
        if (!info->xfer_alloc_table)
                return -ENOMEM;

        /* Pre-initialize the buffer pointer to pre-allocated buffers */
        for (i = 0, xfer = info->xfer_block; i < desc->max_msg; i++, xfer++) {
                xfer->rx.buf = devm_kcalloc(dev, sizeof(u8), desc->max_msg_size,
                                            GFP_KERNEL);
                if (!xfer->rx.buf)
                        return -ENOMEM;

                xfer->tx.buf = xfer->rx.buf;
                init_completion(&xfer->done);
        }

        spin_lock_init(&info->xfer_lock);

        return 0;
}

static int scmi_mailbox_check(struct device_node *np, int idx)
{
        return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells",
                                          idx, NULL);
}

static int scmi_mbox_chan_setup(struct scmi_info *info, struct device *dev,
                                int prot_id, bool tx)
{
        int ret, idx;
        struct resource res;
        resource_size_t size;
        struct device_node *shmem, *np = dev->of_node;
        struct scmi_chan_info *cinfo;
        struct mbox_client *cl;
        struct idr *idr;
        const char *desc = tx ? "Tx" : "Rx";

        /* Transmit channel is first entry i.e. index 0 */
        idx = tx ? 0 : 1;
        idr = tx ? &info->tx_idr : &info->rx_idr;

        if (scmi_mailbox_check(np, idx)) {
                cinfo = idr_find(idr, SCMI_PROTOCOL_BASE);
                if (unlikely(!cinfo)) /* Possible only if platform has no Rx */
                        return -EINVAL;
                goto idr_alloc;
        }

        cinfo = devm_kzalloc(info->dev, sizeof(*cinfo), GFP_KERNEL);
        if (!cinfo)
                return -ENOMEM;

        cinfo->dev = dev;

        cl = &cinfo->cl;
        cl->dev = dev;
        cl->rx_callback = scmi_rx_callback;
        cl->tx_prepare = tx ? scmi_tx_prepare : NULL;
        cl->tx_block = false;
        cl->knows_txdone = tx;

        shmem = of_parse_phandle(np, "shmem", idx);
        ret = of_address_to_resource(shmem, 0, &res);
        of_node_put(shmem);
        if (ret) {
                dev_err(dev, "failed to get SCMI %s payload memory\n", desc);
                return ret;
        }

        size = resource_size(&res);
        cinfo->payload = devm_ioremap(info->dev, res.start, size);
        if (!cinfo->payload) {
                dev_err(dev, "failed to ioremap SCMI %s payload\n", desc);
                return -EADDRNOTAVAIL;
        }

        cinfo->chan = mbox_request_channel(cl, idx);
        if (IS_ERR(cinfo->chan)) {
                ret = PTR_ERR(cinfo->chan);
                if (ret != -EPROBE_DEFER)
                        dev_err(dev, "failed to request SCMI %s mailbox\n",
                                desc);
                return ret;
        }

idr_alloc:
        ret = idr_alloc(idr, cinfo, prot_id, prot_id + 1, GFP_KERNEL);
        if (ret != prot_id) {
                dev_err(dev, "unable to allocate SCMI idr slot err %d\n", ret);
                return ret;
        }

        cinfo->handle = &info->handle;
        return 0;
}

static inline int
scmi_mbox_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id)
{
        int ret = scmi_mbox_chan_setup(info, dev, prot_id, true);

        if (!ret) /* Rx is optional, hence no error check */
                scmi_mbox_chan_setup(info, dev, prot_id, false);

        return ret;
}

static inline void
scmi_create_protocol_device(struct device_node *np, struct scmi_info *info,
                            int prot_id)
{
        struct scmi_device *sdev;

        sdev = scmi_device_create(np, info->dev, prot_id);
        if (!sdev) {
                dev_err(info->dev, "failed to create %d protocol device\n",
                        prot_id);
                return;
        }

        if (scmi_mbox_txrx_setup(info, &sdev->dev, prot_id)) {
                dev_err(&sdev->dev, "failed to setup transport\n");
                scmi_device_destroy(sdev);
                return;
        }

        /* setup handle now as the transport is ready */
        scmi_set_handle(sdev);
}

static int scmi_probe(struct platform_device *pdev)
{
        int ret;
        struct scmi_handle *handle;
        const struct scmi_desc *desc;
        struct scmi_info *info;
        struct device *dev = &pdev->dev;
        struct device_node *child, *np = dev->of_node;

        /* Only mailbox method supported, check for the presence of one */
        if (scmi_mailbox_check(np, 0)) {
                dev_err(dev, "no mailbox found in %pOF\n", np);
                return -EINVAL;
        }

        desc = of_device_get_match_data(dev);
        if (!desc)
                return -EINVAL;

        info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
        if (!info)
                return -ENOMEM;

        info->dev = dev;
        info->desc = desc;
        INIT_LIST_HEAD(&info->node);

        ret = scmi_xfer_info_init(info);
        if (ret)
                return ret;

        platform_set_drvdata(pdev, info);
        idr_init(&info->tx_idr);
        idr_init(&info->rx_idr);

        handle = &info->handle;
        handle->dev = info->dev;
        handle->version = &info->version;

        ret = scmi_mbox_txrx_setup(info, dev, SCMI_PROTOCOL_BASE);
        if (ret)
                return ret;

        ret = scmi_base_protocol_init(handle);
        if (ret) {
                dev_err(dev, "unable to communicate with SCMI(%d)\n", ret);
                return ret;
        }

        mutex_lock(&scmi_list_mutex);
        list_add_tail(&info->node, &scmi_list);
        mutex_unlock(&scmi_list_mutex);

        for_each_available_child_of_node(np, child) {
                u32 prot_id;

                if (of_property_read_u32(child, "reg", &prot_id))
                        continue;

                if (!FIELD_FIT(MSG_PROTOCOL_ID_MASK, prot_id))
                        dev_err(dev, "Out of range protocol %d\n", prot_id);

                if (!scmi_is_protocol_implemented(handle, prot_id)) {
                        dev_err(dev, "SCMI protocol %d not implemented\n",
                                prot_id);
                        continue;
                }

                scmi_create_protocol_device(child, info, prot_id);
        }

        return 0;
}

static int scmi_mbox_free_channel(int id, void *p, void *data)
{
        struct scmi_chan_info *cinfo = p;
        struct idr *idr = data;

        if (!IS_ERR_OR_NULL(cinfo->chan)) {
                mbox_free_channel(cinfo->chan);
                cinfo->chan = NULL;
        }

        idr_remove(idr, id);

        return 0;
}

static int scmi_remove(struct platform_device *pdev)
{
        int ret = 0;
        struct scmi_info *info = platform_get_drvdata(pdev);
        struct idr *idr = &info->tx_idr;

        mutex_lock(&scmi_list_mutex);
        if (info->users)
                ret = -EBUSY;
        else
                list_del(&info->node);
        mutex_unlock(&scmi_list_mutex);

        if (ret)
                return ret;

        /* Safe to free channels since no more users */
        ret = idr_for_each(idr, scmi_mbox_free_channel, idr);
        idr_destroy(&info->tx_idr);

        idr = &info->rx_idr;
        ret = idr_for_each(idr, scmi_mbox_free_channel, idr);
        idr_destroy(&info->rx_idr);

        return ret;
}

static const struct scmi_desc scmi_generic_desc = {
        .max_rx_timeout_ms = 30,        /* We may increase this if required */
        .max_msg = 20,          /* Limited by MBOX_TX_QUEUE_LEN */
        .max_msg_size = 128,
};

/* Each compatible listed below must have descriptor associated with it */
static const struct of_device_id scmi_of_match[] = {
        { .compatible = "arm,scmi", .data = &scmi_generic_desc },
        { /* Sentinel */ },
};

MODULE_DEVICE_TABLE(of, scmi_of_match);

static struct platform_driver scmi_driver = {
        .driver = {
                   .name = "arm-scmi",
                   .of_match_table = scmi_of_match,
                   },
        .probe = scmi_probe,
        .remove = scmi_remove,
};

module_platform_driver(scmi_driver);

MODULE_ALIAS("platform: arm-scmi");
MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
MODULE_DESCRIPTION("ARM SCMI protocol driver");
MODULE_LICENSE("GPL v2");