1 // SPDX-License-Identifier: MIT
3 * Copyright © 2014-2019 Intel Corporation
6 * Vinit Azad <vinit.azad@intel.com>
7 * Ben Widawsky <ben@bwidawsk.net>
8 * Dave Gordon <david.s.gordon@intel.com>
9 * Alex Dai <yu.dai@intel.com>
12 #include "gt/intel_gt.h"
13 #include "intel_guc_fw.h"
17 * intel_guc_fw_init_early() - initializes GuC firmware struct
18 * @guc: intel_guc struct
20 * On platforms with GuC selects firmware for uploading
22 void intel_guc_fw_init_early(struct intel_guc
*guc
)
24 struct drm_i915_private
*i915
= guc_to_gt(guc
)->i915
;
26 intel_uc_fw_init_early(&guc
->fw
, INTEL_UC_FW_TYPE_GUC
, HAS_GT_UC(i915
),
27 INTEL_INFO(i915
)->platform
, INTEL_REVID(i915
));
30 static void guc_prepare_xfer(struct intel_uncore
*uncore
)
32 u32 shim_flags
= GUC_DISABLE_SRAM_INIT_TO_ZEROES
|
33 GUC_ENABLE_READ_CACHE_LOGIC
|
34 GUC_ENABLE_MIA_CACHING
|
35 GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA
|
36 GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA
|
37 GUC_ENABLE_MIA_CLOCK_GATING
;
39 /* Must program this register before loading the ucode with DMA */
40 intel_uncore_write(uncore
, GUC_SHIM_CONTROL
, shim_flags
);
42 if (IS_GEN9_LP(uncore
->i915
))
43 intel_uncore_write(uncore
, GEN9LP_GT_PM_CONFIG
, GT_DOORBELL_ENABLE
);
45 intel_uncore_write(uncore
, GEN9_GT_PM_CONFIG
, GT_DOORBELL_ENABLE
);
47 if (IS_GEN(uncore
->i915
, 9)) {
48 /* DOP Clock Gating Enable for GuC clocks */
49 intel_uncore_rmw(uncore
, GEN7_MISCCPCTL
,
50 0, GEN8_DOP_CLOCK_GATE_GUC_ENABLE
);
52 /* allows for 5us (in 10ns units) before GT can go to RC6 */
53 intel_uncore_write(uncore
, GUC_ARAT_C6DIS
, 0x1FF);
57 /* Copy RSA signature from the fw image to HW for verification */
58 static void guc_xfer_rsa(struct intel_uc_fw
*guc_fw
,
59 struct intel_uncore
*uncore
)
61 u32 rsa
[UOS_RSA_SCRATCH_COUNT
];
65 copied
= intel_uc_fw_copy_rsa(guc_fw
, rsa
, sizeof(rsa
));
66 GEM_BUG_ON(copied
< sizeof(rsa
));
68 for (i
= 0; i
< UOS_RSA_SCRATCH_COUNT
; i
++)
69 intel_uncore_write(uncore
, UOS_RSA_SCRATCH(i
), rsa
[i
]);
73 * Read the GuC status register (GUC_STATUS) and store it in the
74 * specified location; then return a boolean indicating whether
75 * the value matches either of two values representing completion
76 * of the GuC boot process.
78 * This is used for polling the GuC status in a wait_for()
81 static inline bool guc_ready(struct intel_uncore
*uncore
, u32
*status
)
83 u32 val
= intel_uncore_read(uncore
, GUC_STATUS
);
84 u32 uk_val
= val
& GS_UKERNEL_MASK
;
87 return (uk_val
== GS_UKERNEL_READY
) ||
88 ((val
& GS_MIA_CORE_STATE
) && (uk_val
== GS_UKERNEL_LAPIC_DONE
));
91 static int guc_wait_ucode(struct intel_uncore
*uncore
)
97 * Wait for the GuC to start up.
98 * NB: Docs recommend not using the interrupt for completion.
99 * Measurements indicate this should take no more than 20ms, so a
100 * timeout here indicates that the GuC has failed and is unusable.
101 * (Higher levels of the driver may decide to reset the GuC and
102 * attempt the ucode load again if this happens.)
104 ret
= wait_for(guc_ready(uncore
, &status
), 100);
105 DRM_DEBUG_DRIVER("GuC status %#x\n", status
);
107 if ((status
& GS_BOOTROM_MASK
) == GS_BOOTROM_RSA_FAILED
) {
108 DRM_ERROR("GuC firmware signature verification failed\n");
112 if ((status
& GS_UKERNEL_MASK
) == GS_UKERNEL_EXCEPTION
) {
113 DRM_ERROR("GuC firmware exception. EIP: %#x\n",
114 intel_uncore_read(uncore
, SOFT_SCRATCH(13)));
122 * intel_guc_fw_upload() - load GuC uCode to device
123 * @guc: intel_guc structure
125 * Called from intel_uc_init_hw() during driver load, resume from sleep and
128 * The firmware image should have already been fetched into memory, so only
129 * check that fetch succeeded, and then transfer the image to the h/w.
131 * Return: non-zero code on error
133 int intel_guc_fw_upload(struct intel_guc
*guc
)
135 struct intel_gt
*gt
= guc_to_gt(guc
);
136 struct intel_uncore
*uncore
= gt
->uncore
;
139 guc_prepare_xfer(uncore
);
142 * Note that GuC needs the CSS header plus uKernel code to be copied
143 * by the DMA engine in one operation, whereas the RSA signature is
146 guc_xfer_rsa(&guc
->fw
, uncore
);
149 * Current uCode expects the code to be loaded at 8k; locations below
150 * this are used for the stack.
152 ret
= intel_uc_fw_upload(&guc
->fw
, 0x2000, UOS_MOVE
);
156 ret
= guc_wait_ucode(uncore
);
160 intel_uc_fw_change_status(&guc
->fw
, INTEL_UC_FIRMWARE_RUNNING
);
164 intel_uc_fw_change_status(&guc
->fw
, INTEL_UC_FIRMWARE_FAIL
);