2 * Copyright © 2014 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the
6 * "Software"), to deal in the Software without restriction, including
7 * without limitation the rights to use, copy, modify, merge, publish,
8 * distribute, sub license, and/or sell copies of the Software, and to
9 * permit persons to whom the Software is furnished to do so, subject to
10 * the following conditions:
12 * The above copyright notice and this permission notice (including the
13 * next paragraph) shall be included in all copies or substantial portions
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
21 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
25 #include <drm/drm_print.h>
27 #include "i915_params.h"
30 #define i915_param_named(name, T, perm, desc) \
31 module_param_named(name, i915_modparams.name, T, perm); \
32 MODULE_PARM_DESC(name, desc)
33 #define i915_param_named_unsafe(name, T, perm, desc) \
34 module_param_named_unsafe(name, i915_modparams.name, T, perm); \
35 MODULE_PARM_DESC(name, desc)
37 struct i915_params i915_modparams __read_mostly
= {
38 #define MEMBER(T, member, value) .member = (value),
39 I915_PARAMS_FOR_EACH(MEMBER
)
43 i915_param_named(modeset
, int, 0400,
44 "Use kernel modesetting [KMS] (0=disable, "
45 "1=on, -1=force vga console preference [default])");
47 i915_param_named_unsafe(enable_dc
, int, 0400,
48 "Enable power-saving display C-states. "
49 "(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6; "
50 "3=up to DC5 with DC3CO; 4=up to DC6 with DC3CO)");
52 i915_param_named_unsafe(enable_fbc
, int, 0600,
53 "Enable frame buffer compression for power savings "
54 "(default: -1 (use per-chip default))");
56 i915_param_named_unsafe(lvds_channel_mode
, int, 0400,
57 "Specify LVDS channel mode "
58 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
60 i915_param_named_unsafe(panel_use_ssc
, int, 0600,
61 "Use Spread Spectrum Clock with panels [LVDS/eDP] "
62 "(default: auto from VBT)");
64 i915_param_named_unsafe(vbt_sdvo_panel_type
, int, 0400,
65 "Override/Ignore selection of SDVO panel mode in the VBT "
66 "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
68 i915_param_named_unsafe(reset
, int, 0600,
69 "Attempt GPU resets (0=disabled, 1=full gpu reset, 2=engine reset [default])");
71 i915_param_named_unsafe(vbt_firmware
, charp
, 0400,
72 "Load VBT from specified file under /lib/firmware");
74 #if IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR)
75 i915_param_named(error_capture
, bool, 0600,
76 "Record the GPU state following a hang. "
77 "This information in /sys/class/drm/card<N>/error is vital for "
78 "triaging and debugging hangs.");
81 i915_param_named_unsafe(enable_hangcheck
, bool, 0600,
82 "Periodically check GPU activity for detecting hangs. "
83 "WARNING: Disabling this can cause system wide hangs. "
86 i915_param_named_unsafe(enable_psr
, int, 0600,
88 "(0=disabled, 1=enabled) "
89 "Default: -1 (use per-chip default)");
91 i915_param_named_unsafe(force_probe
, charp
, 0400,
92 "Force probe the driver for specified devices. "
93 "See CONFIG_DRM_I915_FORCE_PROBE for details.");
95 i915_param_named_unsafe(alpha_support
, bool, 0400,
96 "Deprecated. See i915.force_probe.");
98 i915_param_named_unsafe(disable_power_well
, int, 0400,
99 "Disable display power wells when possible "
100 "(-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)");
102 i915_param_named_unsafe(enable_ips
, int, 0600, "Enable IPS (default: true)");
104 i915_param_named(fastboot
, int, 0600,
105 "Try to skip unnecessary mode sets at boot time "
106 "(0=disabled, 1=enabled) "
107 "Default: -1 (use per-chip default)");
109 i915_param_named_unsafe(prefault_disable
, bool, 0600,
110 "Disable page prefaulting for pread/pwrite/reloc (default:false). "
111 "For developers only.");
113 i915_param_named_unsafe(load_detect_test
, bool, 0600,
114 "Force-enable the VGA load detect code for testing (default:false). "
115 "For developers only.");
117 i915_param_named_unsafe(force_reset_modeset_test
, bool, 0600,
118 "Force a modeset during gpu reset for testing (default:false). "
119 "For developers only.");
121 i915_param_named_unsafe(invert_brightness
, int, 0600,
122 "Invert backlight brightness "
123 "(-1 force normal, 0 machine defaults, 1 force inversion), please "
124 "report PCI device ID, subsystem vendor and subsystem device ID "
125 "to dri-devel@lists.freedesktop.org, if your machine needs it. "
126 "It will then be included in an upcoming module version.");
128 i915_param_named(disable_display
, bool, 0400,
129 "Disable display (default: false)");
131 i915_param_named(mmio_debug
, int, 0600,
132 "Enable the MMIO debug code for the first N failures (default: off). "
133 "This may negatively affect performance.");
135 i915_param_named(verbose_state_checks
, bool, 0600,
136 "Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");
138 i915_param_named_unsafe(nuclear_pageflip
, bool, 0400,
139 "Force enable atomic functionality on platforms that don't have full support yet.");
141 /* WA to get away with the default setting in VBT for early platforms.Will be removed */
142 i915_param_named_unsafe(edp_vswing
, int, 0400,
143 "Ignore/Override vswing pre-emph table selection from VBT "
144 "(0=use value from vbt [default], 1=low power swing(200mV),"
145 "2=default swing(400mV))");
147 i915_param_named_unsafe(enable_guc
, int, 0400,
148 "Enable GuC load for GuC submission and/or HuC load. "
149 "Required functionality can be selected using bitmask values. "
150 "(-1=auto, 0=disable [default], 1=GuC submission, 2=HuC load)");
152 i915_param_named(guc_log_level
, int, 0400,
153 "GuC firmware logging level. Requires GuC to be loaded. "
154 "(-1=auto [default], 0=disable, 1..4=enable with verbosity min..max)");
156 i915_param_named_unsafe(guc_firmware_path
, charp
, 0400,
157 "GuC firmware path to use instead of the default one");
159 i915_param_named_unsafe(huc_firmware_path
, charp
, 0400,
160 "HuC firmware path to use instead of the default one");
162 i915_param_named_unsafe(dmc_firmware_path
, charp
, 0400,
163 "DMC firmware path to use instead of the default one");
165 i915_param_named_unsafe(enable_dp_mst
, bool, 0600,
166 "Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true)");
168 #if IS_ENABLED(CONFIG_DRM_I915_DEBUG)
169 i915_param_named_unsafe(inject_probe_failure
, uint
, 0400,
170 "Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)");
173 i915_param_named(enable_dpcd_backlight
, int, 0600,
174 "Enable support for DPCD backlight control"
175 "(-1=use per-VBT LFP backlight type setting, 0=disabled [default], 1=enabled)");
177 #if IS_ENABLED(CONFIG_DRM_I915_GVT)
178 i915_param_named(enable_gvt
, bool, 0400,
179 "Enable support for Intel GVT-g graphics virtualization host support(default:false)");
182 #if IS_ENABLED(CONFIG_DRM_I915_UNSTABLE_FAKE_LMEM)
183 i915_param_named_unsafe(fake_lmem_start
, ulong
, 0600,
184 "Fake LMEM start offset (default: 0)");
187 static __always_inline
void _print_param(struct drm_printer
*p
,
192 if (!__builtin_strcmp(type
, "bool"))
193 drm_printf(p
, "i915.%s=%s\n", name
, yesno(*(const bool *)x
));
194 else if (!__builtin_strcmp(type
, "int"))
195 drm_printf(p
, "i915.%s=%d\n", name
, *(const int *)x
);
196 else if (!__builtin_strcmp(type
, "unsigned int"))
197 drm_printf(p
, "i915.%s=%u\n", name
, *(const unsigned int *)x
);
198 else if (!__builtin_strcmp(type
, "unsigned long"))
199 drm_printf(p
, "i915.%s=%lu\n", name
, *(const unsigned long *)x
);
200 else if (!__builtin_strcmp(type
, "char *"))
201 drm_printf(p
, "i915.%s=%s\n", name
, *(const char **)x
);
203 WARN_ONCE(1, "no printer defined for param type %s (i915.%s)\n",
208 * i915_params_dump - dump i915 modparams
209 * @params: i915 modparams
210 * @p: the &drm_printer
212 * Pretty printer for i915 modparams.
214 void i915_params_dump(const struct i915_params
*params
, struct drm_printer
*p
)
216 #define PRINT(T, x, ...) _print_param(p, #x, #T, ¶ms->x);
217 I915_PARAMS_FOR_EACH(PRINT
);
221 static __always_inline
void dup_param(const char *type
, void *x
)
223 if (!__builtin_strcmp(type
, "char *"))
224 *(void **)x
= kstrdup(*(void **)x
, GFP_ATOMIC
);
227 void i915_params_copy(struct i915_params
*dest
, const struct i915_params
*src
)
230 #define DUP(T, x, ...) dup_param(#T, &dest->x);
231 I915_PARAMS_FOR_EACH(DUP
);
235 static __always_inline
void free_param(const char *type
, void *x
)
237 if (!__builtin_strcmp(type
, "char *")) {
243 /* free the allocated members, *not* the passed in params itself */
244 void i915_params_free(struct i915_params
*params
)
246 #define FREE(T, x, ...) free_param(#T, ¶ms->x);
247 I915_PARAMS_FOR_EACH(FREE
);