1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2013 Red Hat
4 * Author: Rob Clark <robdclark@gmail.com>
7 #include <linux/delay.h>
11 static void hdmi_phy_8x60_powerup(struct hdmi_phy
*phy
,
12 unsigned long int pixclock
)
14 /* De-serializer delay D/C for non-lbk mode: */
15 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG0
,
16 HDMI_8x60_PHY_REG0_DESER_DEL_CTRL(3));
18 if (pixclock
== 27000000) {
19 /* video_format == HDMI_VFRMT_720x480p60_16_9 */
20 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG1
,
21 HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
22 HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(3));
24 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG1
,
25 HDMI_8x60_PHY_REG1_DTEST_MUX_SEL(5) |
26 HDMI_8x60_PHY_REG1_OUTVOL_SWING_CTRL(4));
29 /* No matter what, start from the power down mode: */
30 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG2
,
31 HDMI_8x60_PHY_REG2_PD_PWRGEN
|
32 HDMI_8x60_PHY_REG2_PD_PLL
|
33 HDMI_8x60_PHY_REG2_PD_DRIVE_4
|
34 HDMI_8x60_PHY_REG2_PD_DRIVE_3
|
35 HDMI_8x60_PHY_REG2_PD_DRIVE_2
|
36 HDMI_8x60_PHY_REG2_PD_DRIVE_1
|
37 HDMI_8x60_PHY_REG2_PD_DESER
);
39 /* Turn PowerGen on: */
40 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG2
,
41 HDMI_8x60_PHY_REG2_PD_PLL
|
42 HDMI_8x60_PHY_REG2_PD_DRIVE_4
|
43 HDMI_8x60_PHY_REG2_PD_DRIVE_3
|
44 HDMI_8x60_PHY_REG2_PD_DRIVE_2
|
45 HDMI_8x60_PHY_REG2_PD_DRIVE_1
|
46 HDMI_8x60_PHY_REG2_PD_DESER
);
48 /* Turn PLL power on: */
49 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG2
,
50 HDMI_8x60_PHY_REG2_PD_DRIVE_4
|
51 HDMI_8x60_PHY_REG2_PD_DRIVE_3
|
52 HDMI_8x60_PHY_REG2_PD_DRIVE_2
|
53 HDMI_8x60_PHY_REG2_PD_DRIVE_1
|
54 HDMI_8x60_PHY_REG2_PD_DESER
);
56 /* Write to HIGH after PLL power down de-assert: */
57 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG3
,
58 HDMI_8x60_PHY_REG3_PLL_ENABLE
);
60 /* ASIC power on; PHY REG9 = 0 */
61 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG9
, 0);
63 /* Enable PLL lock detect, PLL lock det will go high after lock
64 * Enable the re-time logic
66 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG12
,
67 HDMI_8x60_PHY_REG12_RETIMING_EN
|
68 HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN
);
71 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG2
,
72 HDMI_8x60_PHY_REG2_PD_DESER
);
74 /* If the RX detector is needed: */
75 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG2
,
76 HDMI_8x60_PHY_REG2_RCV_SENSE_EN
|
77 HDMI_8x60_PHY_REG2_PD_DESER
);
79 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG4
, 0);
80 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG5
, 0);
81 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG6
, 0);
82 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG7
, 0);
83 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG8
, 0);
84 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG9
, 0);
85 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG10
, 0);
86 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG11
, 0);
88 /* If we want to use lock enable based on counting: */
89 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG12
,
90 HDMI_8x60_PHY_REG12_RETIMING_EN
|
91 HDMI_8x60_PHY_REG12_PLL_LOCK_DETECT_EN
|
92 HDMI_8x60_PHY_REG12_FORCE_LOCK
);
95 static void hdmi_phy_8x60_powerdown(struct hdmi_phy
*phy
)
97 /* Assert RESET PHY from controller */
98 hdmi_phy_write(phy
, REG_HDMI_PHY_CTRL
,
99 HDMI_PHY_CTRL_SW_RESET
);
101 /* De-assert RESET PHY from controller */
102 hdmi_phy_write(phy
, REG_HDMI_PHY_CTRL
, 0);
103 /* Turn off Driver */
104 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG2
,
105 HDMI_8x60_PHY_REG2_PD_DRIVE_4
|
106 HDMI_8x60_PHY_REG2_PD_DRIVE_3
|
107 HDMI_8x60_PHY_REG2_PD_DRIVE_2
|
108 HDMI_8x60_PHY_REG2_PD_DRIVE_1
|
109 HDMI_8x60_PHY_REG2_PD_DESER
);
112 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG3
, 0);
113 /* Power down PHY, but keep RX-sense: */
114 hdmi_phy_write(phy
, REG_HDMI_8x60_PHY_REG2
,
115 HDMI_8x60_PHY_REG2_RCV_SENSE_EN
|
116 HDMI_8x60_PHY_REG2_PD_PWRGEN
|
117 HDMI_8x60_PHY_REG2_PD_PLL
|
118 HDMI_8x60_PHY_REG2_PD_DRIVE_4
|
119 HDMI_8x60_PHY_REG2_PD_DRIVE_3
|
120 HDMI_8x60_PHY_REG2_PD_DRIVE_2
|
121 HDMI_8x60_PHY_REG2_PD_DRIVE_1
|
122 HDMI_8x60_PHY_REG2_PD_DESER
);
125 const struct hdmi_phy_cfg msm_hdmi_phy_8x60_cfg
= {
126 .type
= MSM_HDMI_PHY_8x60
,
127 .powerup
= hdmi_phy_8x60_powerup
,
128 .powerdown
= hdmi_phy_8x60_powerdown
,