1 // SPDX-License-Identifier: GPL-2.0
3 * Sharp LS037V7DW01 LCD Panel Driver
5 * Copyright (C) 2019 Texas Instruments Incorporated
7 * Based on the omapdrm-specific panel-sharp-ls037v7dw01 driver
9 * Copyright (C) 2013 Texas Instruments Incorporated
10 * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
13 #include <linux/delay.h>
14 #include <linux/gpio/consumer.h>
15 #include <linux/module.h>
17 #include <linux/platform_device.h>
18 #include <linux/regulator/consumer.h>
20 #include <drm/drm_connector.h>
21 #include <drm/drm_modes.h>
22 #include <drm/drm_panel.h>
24 struct ls037v7dw01_panel
{
25 struct drm_panel panel
;
26 struct platform_device
*pdev
;
28 struct regulator
*vdd
;
29 struct gpio_desc
*resb_gpio
; /* low = reset active min 20 us */
30 struct gpio_desc
*ini_gpio
; /* high = power on */
31 struct gpio_desc
*mo_gpio
; /* low = 480x640, high = 240x320 */
32 struct gpio_desc
*lr_gpio
; /* high = conventional horizontal scanning */
33 struct gpio_desc
*ud_gpio
; /* high = conventional vertical scanning */
36 #define to_ls037v7dw01_device(p) \
37 container_of(p, struct ls037v7dw01_panel, panel)
39 static int ls037v7dw01_disable(struct drm_panel
*panel
)
41 struct ls037v7dw01_panel
*lcd
= to_ls037v7dw01_device(panel
);
43 gpiod_set_value_cansleep(lcd
->ini_gpio
, 0);
44 gpiod_set_value_cansleep(lcd
->resb_gpio
, 0);
46 /* Wait at least 5 vsyncs after disabling the LCD. */
52 static int ls037v7dw01_unprepare(struct drm_panel
*panel
)
54 struct ls037v7dw01_panel
*lcd
= to_ls037v7dw01_device(panel
);
56 regulator_disable(lcd
->vdd
);
60 static int ls037v7dw01_prepare(struct drm_panel
*panel
)
62 struct ls037v7dw01_panel
*lcd
= to_ls037v7dw01_device(panel
);
65 ret
= regulator_enable(lcd
->vdd
);
67 dev_err(&lcd
->pdev
->dev
, "%s: failed to enable regulator\n",
73 static int ls037v7dw01_enable(struct drm_panel
*panel
)
75 struct ls037v7dw01_panel
*lcd
= to_ls037v7dw01_device(panel
);
77 /* Wait couple of vsyncs before enabling the LCD. */
80 gpiod_set_value_cansleep(lcd
->resb_gpio
, 1);
81 gpiod_set_value_cansleep(lcd
->ini_gpio
, 1);
86 static const struct drm_display_mode ls037v7dw01_mode
= {
89 .hsync_start
= 480 + 1,
90 .hsync_end
= 480 + 1 + 2,
91 .htotal
= 480 + 1 + 2 + 28,
93 .vsync_start
= 640 + 1,
94 .vsync_end
= 640 + 1 + 1,
95 .vtotal
= 640 + 1 + 1 + 1,
97 .type
= DRM_MODE_TYPE_DRIVER
| DRM_MODE_TYPE_PREFERRED
,
98 .flags
= DRM_MODE_FLAG_NHSYNC
| DRM_MODE_FLAG_NVSYNC
,
103 static int ls037v7dw01_get_modes(struct drm_panel
*panel
,
104 struct drm_connector
*connector
)
106 struct drm_display_mode
*mode
;
108 mode
= drm_mode_duplicate(connector
->dev
, &ls037v7dw01_mode
);
112 drm_mode_set_name(mode
);
113 drm_mode_probed_add(connector
, mode
);
115 connector
->display_info
.width_mm
= ls037v7dw01_mode
.width_mm
;
116 connector
->display_info
.height_mm
= ls037v7dw01_mode
.height_mm
;
118 * FIXME: According to the datasheet pixel data is sampled on the
119 * rising edge of the clock, but the code running on the SDP3430
120 * indicates sampling on the negative edge. This should be tested on a
123 connector
->display_info
.bus_flags
= DRM_BUS_FLAG_DE_HIGH
124 | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE
125 | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE
;
130 static const struct drm_panel_funcs ls037v7dw01_funcs
= {
131 .disable
= ls037v7dw01_disable
,
132 .unprepare
= ls037v7dw01_unprepare
,
133 .prepare
= ls037v7dw01_prepare
,
134 .enable
= ls037v7dw01_enable
,
135 .get_modes
= ls037v7dw01_get_modes
,
138 static int ls037v7dw01_probe(struct platform_device
*pdev
)
140 struct ls037v7dw01_panel
*lcd
;
142 lcd
= devm_kzalloc(&pdev
->dev
, sizeof(*lcd
), GFP_KERNEL
);
146 platform_set_drvdata(pdev
, lcd
);
149 lcd
->vdd
= devm_regulator_get(&pdev
->dev
, "envdd");
150 if (IS_ERR(lcd
->vdd
)) {
151 dev_err(&pdev
->dev
, "failed to get regulator\n");
152 return PTR_ERR(lcd
->vdd
);
155 lcd
->ini_gpio
= devm_gpiod_get(&pdev
->dev
, "enable", GPIOD_OUT_LOW
);
156 if (IS_ERR(lcd
->ini_gpio
)) {
157 dev_err(&pdev
->dev
, "failed to get enable gpio\n");
158 return PTR_ERR(lcd
->ini_gpio
);
161 lcd
->resb_gpio
= devm_gpiod_get(&pdev
->dev
, "reset", GPIOD_OUT_LOW
);
162 if (IS_ERR(lcd
->resb_gpio
)) {
163 dev_err(&pdev
->dev
, "failed to get reset gpio\n");
164 return PTR_ERR(lcd
->resb_gpio
);
167 lcd
->mo_gpio
= devm_gpiod_get_index(&pdev
->dev
, "mode", 0,
169 if (IS_ERR(lcd
->mo_gpio
)) {
170 dev_err(&pdev
->dev
, "failed to get mode[0] gpio\n");
171 return PTR_ERR(lcd
->mo_gpio
);
174 lcd
->lr_gpio
= devm_gpiod_get_index(&pdev
->dev
, "mode", 1,
176 if (IS_ERR(lcd
->lr_gpio
)) {
177 dev_err(&pdev
->dev
, "failed to get mode[1] gpio\n");
178 return PTR_ERR(lcd
->lr_gpio
);
181 lcd
->ud_gpio
= devm_gpiod_get_index(&pdev
->dev
, "mode", 2,
183 if (IS_ERR(lcd
->ud_gpio
)) {
184 dev_err(&pdev
->dev
, "failed to get mode[2] gpio\n");
185 return PTR_ERR(lcd
->ud_gpio
);
188 drm_panel_init(&lcd
->panel
, &pdev
->dev
, &ls037v7dw01_funcs
,
189 DRM_MODE_CONNECTOR_DPI
);
191 return drm_panel_add(&lcd
->panel
);
194 static int ls037v7dw01_remove(struct platform_device
*pdev
)
196 struct ls037v7dw01_panel
*lcd
= platform_get_drvdata(pdev
);
198 drm_panel_remove(&lcd
->panel
);
199 drm_panel_disable(&lcd
->panel
);
200 drm_panel_unprepare(&lcd
->panel
);
205 static const struct of_device_id ls037v7dw01_of_match
[] = {
206 { .compatible
= "sharp,ls037v7dw01", },
210 MODULE_DEVICE_TABLE(of
, ls037v7dw01_of_match
);
212 static struct platform_driver ls037v7dw01_driver
= {
213 .probe
= ls037v7dw01_probe
,
214 .remove
= ls037v7dw01_remove
,
216 .name
= "panel-sharp-ls037v7dw01",
217 .of_match_table
= ls037v7dw01_of_match
,
221 module_platform_driver(ls037v7dw01_driver
);
223 MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
224 MODULE_DESCRIPTION("Sharp LS037V7DW01 Panel Driver");
225 MODULE_LICENSE("GPL");