?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / input / keyboard / hil_kbd.c
blobbb29a7c9a1c0cf51d81b338834e149ab8555d50d
1 /*
2 * Generic linux-input device driver for keyboard devices
3 *
4 * Copyright (c) 2001 Brian S. Julin
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. The name of the author may not be used to endorse or promote products
14 * derived from this software without specific prior written permission.
15 *
16 * Alternatively, this software may be distributed under the terms of the
17 * GNU General Public License ("GPL").
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 *
29 * References:
30 * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A
31 *
32 */
33
34 #include <linux/hil.h>
35 #include <linux/input.h>
36 #include <linux/serio.h>
37 #include <linux/kernel.h>
38 #include <linux/module.h>
39 #include <linux/completion.h>
40 #include <linux/slab.h>
41 #include <linux/pci_ids.h>
42
43 #define PREFIX "HIL: "
44
45 MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
46 MODULE_DESCRIPTION("HIL keyboard/mouse driver");
47 MODULE_LICENSE("Dual BSD/GPL");
48 MODULE_ALIAS("serio:ty03pr25id00ex*"); /* HIL keyboard */
49 MODULE_ALIAS("serio:ty03pr25id0Fex*"); /* HIL mouse */
50
51 #define HIL_PACKET_MAX_LENGTH 16
52
53 #define HIL_KBD_SET1_UPBIT 0x01
54 #define HIL_KBD_SET1_SHIFT 1
55 static unsigned int hil_kbd_set1[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly =
56 { HIL_KEYCODES_SET1 };
57
58 #define HIL_KBD_SET2_UPBIT 0x01
59 #define HIL_KBD_SET2_SHIFT 1
60 /* Set2 is user defined */
61
62 #define HIL_KBD_SET3_UPBIT 0x80
63 #define HIL_KBD_SET3_SHIFT 0
64 static unsigned int hil_kbd_set3[HIL_KEYCODES_SET3_TBLSIZE] __read_mostly =
65 { HIL_KEYCODES_SET3 };
66
67 static const char hil_language[][16] = { HIL_LOCALE_MAP };
68
69 struct hil_dev {
70 struct input_dev *dev;
71 struct serio *serio;
72
73 /* Input buffer and index for packets from HIL bus. */
74 hil_packet data[HIL_PACKET_MAX_LENGTH];
75 int idx4; /* four counts per packet */
76
77 /* Raw device info records from HIL bus, see hil.h for fields. */
78 char idd[HIL_PACKET_MAX_LENGTH]; /* DID byte and IDD record */
79 char rsc[HIL_PACKET_MAX_LENGTH]; /* RSC record */
80 char exd[HIL_PACKET_MAX_LENGTH]; /* EXD record */
81 char rnm[HIL_PACKET_MAX_LENGTH + 1]; /* RNM record + NULL term. */
82
83 struct completion cmd_done;
84
85 bool is_pointer;
86 /* Extra device details needed for pointing devices. */
87 unsigned int nbtn, naxes;
88 unsigned int btnmap[7];
89 };
90
91 static bool hil_dev_is_command_response(hil_packet p)
92 {
93 if ((p & ~HIL_CMDCT_POL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL))
94 return false;
95
96 if ((p & ~HIL_CMDCT_RPL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL))
97 return false;
98
99 return true;
100 }
101
102 static void hil_dev_handle_command_response(struct hil_dev *dev)
103 {
104 hil_packet p;
105 char *buf;
106 int i, idx;
107
108 idx = dev->idx4 / 4;
109 p = dev->data[idx - 1];
110
111 switch (p & HIL_PKT_DATA_MASK) {
112 case HIL_CMD_IDD:
113 buf = dev->idd;
114 break;
115
116 case HIL_CMD_RSC:
117 buf = dev->rsc;
118 break;
119
120 case HIL_CMD_EXD:
121 buf = dev->exd;
122 break;
123
124 case HIL_CMD_RNM:
125 dev->rnm[HIL_PACKET_MAX_LENGTH] = 0;
126 buf = dev->rnm;
127 break;
128
129 default:
130 /* These occur when device isn't present */
131 if (p != (HIL_ERR_INT | HIL_PKT_CMD)) {
132 /* Anything else we'd like to know about. */
133 printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p);
134 }
135 goto out;
136 }
137
138 for (i = 0; i < idx; i++)
139 buf[i] = dev->data[i] & HIL_PKT_DATA_MASK;
140 for (; i < HIL_PACKET_MAX_LENGTH; i++)
141 buf[i] = 0;
142 out:
143 complete(&dev->cmd_done);
144 }
145
146 static void hil_dev_handle_kbd_events(struct hil_dev *kbd)
147 {
148 struct input_dev *dev = kbd->dev;
149 int idx = kbd->idx4 / 4;
150 int i;
151
152 switch (kbd->data[0] & HIL_POL_CHARTYPE_MASK) {
153 case HIL_POL_CHARTYPE_NONE:
154 return;
155
156 case HIL_POL_CHARTYPE_ASCII:
157 for (i = 1; i < idx - 1; i++)
158 input_report_key(dev, kbd->data[i] & 0x7f, 1);
159 break;
160
161 case HIL_POL_CHARTYPE_RSVD1:
162 case HIL_POL_CHARTYPE_RSVD2:
163 case HIL_POL_CHARTYPE_BINARY:
164 for (i = 1; i < idx - 1; i++)
165 input_report_key(dev, kbd->data[i], 1);
166 break;
167
168 case HIL_POL_CHARTYPE_SET1:
169 for (i = 1; i < idx - 1; i++) {
170 unsigned int key = kbd->data[i];
171 int up = key & HIL_KBD_SET1_UPBIT;
172
173 key &= (~HIL_KBD_SET1_UPBIT & 0xff);
174 key = hil_kbd_set1[key >> HIL_KBD_SET1_SHIFT];
175 input_report_key(dev, key, !up);
176 }
177 break;
178
179 case HIL_POL_CHARTYPE_SET2:
180 for (i = 1; i < idx - 1; i++) {
181 unsigned int key = kbd->data[i];
182 int up = key & HIL_KBD_SET2_UPBIT;
183
184 key &= (~HIL_KBD_SET1_UPBIT & 0xff);
185 key = key >> HIL_KBD_SET2_SHIFT;
186 input_report_key(dev, key, !up);
187 }
188 break;
189
190 case HIL_POL_CHARTYPE_SET3:
191 for (i = 1; i < idx - 1; i++) {
192 unsigned int key = kbd->data[i];
193 int up = key & HIL_KBD_SET3_UPBIT;
194
195 key &= (~HIL_KBD_SET1_UPBIT & 0xff);
196 key = hil_kbd_set3[key >> HIL_KBD_SET3_SHIFT];
197 input_report_key(dev, key, !up);
198 }
199 break;
200 }
201
202 input_sync(dev);
203 }
204
205 static void hil_dev_handle_ptr_events(struct hil_dev *ptr)
206 {
207 struct input_dev *dev = ptr->dev;
208 int idx = ptr->idx4 / 4;
209 hil_packet p = ptr->data[idx - 1];
210 int i, cnt, laxis;
211 bool absdev, ax16;
212
213 if ((p & HIL_CMDCT_POL) != idx - 1) {
214 printk(KERN_WARNING PREFIX
215 "Malformed poll packet %x (idx = %i)\n", p, idx);
216 return;
217 }
218
219 i = (p & HIL_POL_AXIS_ALT) ? 3 : 0;
220 laxis = (p & HIL_POL_NUM_AXES_MASK) + i;
221
222 ax16 = ptr->idd[1] & HIL_IDD_HEADER_16BIT; /* 8 or 16bit resolution */
223 absdev = ptr->idd[1] & HIL_IDD_HEADER_ABS;
224
225 for (cnt = 1; i < laxis; i++) {
226 unsigned int lo, hi, val;
227
228 lo = ptr->data[cnt++] & HIL_PKT_DATA_MASK;
229 hi = ax16 ? (ptr->data[cnt++] & HIL_PKT_DATA_MASK) : 0;
230
231 if (absdev) {
232 val = lo + (hi << 8);
233 #ifdef TABLET_AUTOADJUST
234 if (val < input_abs_get_min(dev, ABS_X + i))
235 input_abs_set_min(dev, ABS_X + i, val);
236 if (val > input_abs_get_max(dev, ABS_X + i))
237 input_abs_set_max(dev, ABS_X + i, val);
238 #endif
239 if (i % 3)
240 val = input_abs_get_max(dev, ABS_X + i) - val;
241 input_report_abs(dev, ABS_X + i, val);
242 } else {
243 val = (int) (((int8_t) lo) | ((int8_t) hi << 8));
244 if (i % 3)
245 val *= -1;
246 input_report_rel(dev, REL_X + i, val);
247 }
248 }
249
250 while (cnt < idx - 1) {
251 unsigned int btn = ptr->data[cnt++];
252 int up = btn & 1;
253
254 btn &= 0xfe;
255 if (btn == 0x8e)
256 continue; /* TODO: proximity == touch? */
257 if (btn > 0x8c || btn < 0x80)
258 continue;
259 btn = (btn - 0x80) >> 1;
260 btn = ptr->btnmap[btn];
261 input_report_key(dev, btn, !up);
262 }
263
264 input_sync(dev);
265 }
266
267 static void hil_dev_process_err(struct hil_dev *dev)
268 {
269 printk(KERN_WARNING PREFIX "errored HIL packet\n");
270 dev->idx4 = 0;
271 complete(&dev->cmd_done); /* just in case somebody is waiting */
272 }
273
274 static irqreturn_t hil_dev_interrupt(struct serio *serio,
275 unsigned char data, unsigned int flags)
276 {
277 struct hil_dev *dev;
278 hil_packet packet;
279 int idx;
280
281 dev = serio_get_drvdata(serio);
282 BUG_ON(dev == NULL);
283
284 if (dev->idx4 >= HIL_PACKET_MAX_LENGTH * sizeof(hil_packet)) {
285 hil_dev_process_err(dev);
286 goto out;
287 }
288
289 idx = dev->idx4 / 4;
290 if (!(dev->idx4 % 4))
291 dev->data[idx] = 0;
292 packet = dev->data[idx];
293 packet |= ((hil_packet)data) << ((3 - (dev->idx4 % 4)) * 8);
294 dev->data[idx] = packet;
295
296 /* Records of N 4-byte hil_packets must terminate with a command. */
297 if ((++dev->idx4 % 4) == 0) {
298 if ((packet & 0xffff0000) != HIL_ERR_INT) {
299 hil_dev_process_err(dev);
300 } else if (packet & HIL_PKT_CMD) {
301 if (hil_dev_is_command_response(packet))
302 hil_dev_handle_command_response(dev);
303 else if (dev->is_pointer)
304 hil_dev_handle_ptr_events(dev);
305 else
306 hil_dev_handle_kbd_events(dev);
307 dev->idx4 = 0;
308 }
309 }
310 out:
311 return IRQ_HANDLED;
312 }
313
314 static void hil_dev_disconnect(struct serio *serio)
315 {
316 struct hil_dev *dev = serio_get_drvdata(serio);
317
318 BUG_ON(dev == NULL);
319
320 serio_close(serio);
321 input_unregister_device(dev->dev);
322 serio_set_drvdata(serio, NULL);
323 kfree(dev);
324 }
325
326 static void hil_dev_keyboard_setup(struct hil_dev *kbd)
327 {
328 struct input_dev *input_dev = kbd->dev;
329 uint8_t did = kbd->idd[0];
330 int i;
331
332 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
333 input_dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) |
334 BIT_MASK(LED_SCROLLL);
335
336 for (i = 0; i < 128; i++) {
337 __set_bit(hil_kbd_set1[i], input_dev->keybit);
338 __set_bit(hil_kbd_set3[i], input_dev->keybit);
339 }
340 __clear_bit(KEY_RESERVED, input_dev->keybit);
341
342 input_dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE;
343 input_dev->keycodesize = sizeof(hil_kbd_set1[0]);
344 input_dev->keycode = hil_kbd_set1;
345
346 input_dev->name = strlen(kbd->rnm) ? kbd->rnm : "HIL keyboard";
347 input_dev->phys = "hpkbd/input0";
348
349 printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n",
350 did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]);
351 }
352
353 static void hil_dev_pointer_setup(struct hil_dev *ptr)
354 {
355 struct input_dev *input_dev = ptr->dev;
356 uint8_t did = ptr->idd[0];
357 uint8_t *idd = ptr->idd + 1;
358 unsigned int naxsets = HIL_IDD_NUM_AXSETS(*idd);
359 unsigned int i, btntype;
360 const char *txt;
361
362 ptr->naxes = HIL_IDD_NUM_AXES_PER_SET(*idd);
363
364 switch (did & HIL_IDD_DID_TYPE_MASK) {
365 case HIL_IDD_DID_TYPE_REL:
366 input_dev->evbit[0] = BIT_MASK(EV_REL);
367
368 for (i = 0; i < ptr->naxes; i++)
369 __set_bit(REL_X + i, input_dev->relbit);
370
371 for (i = 3; naxsets > 1 && i < ptr->naxes + 3; i++)
372 __set_bit(REL_X + i, input_dev->relbit);
373
374 txt = "relative";
375 break;
376
377 case HIL_IDD_DID_TYPE_ABS:
378 input_dev->evbit[0] = BIT_MASK(EV_ABS);
379
380 for (i = 0; i < ptr->naxes; i++)
381 input_set_abs_params(input_dev, ABS_X + i,
382 0, HIL_IDD_AXIS_MAX(idd, i), 0, 0);
383
384 for (i = 3; naxsets > 1 && i < ptr->naxes + 3; i++)
385 input_set_abs_params(input_dev, ABS_X + i,
386 0, HIL_IDD_AXIS_MAX(idd, i - 3), 0, 0);
387
388 #ifdef TABLET_AUTOADJUST
389 for (i = 0; i < ABS_MAX; i++) {
390 int diff = input_abs_get_max(input_dev, ABS_X + i) / 10;
391 input_abs_set_min(input_dev, ABS_X + i,
392 input_abs_get_min(input_dev, ABS_X + i) + diff);
393 input_abs_set_max(input_dev, ABS_X + i,
394 input_abs_get_max(input_dev, ABS_X + i) - diff);
395 }
396 #endif
397
398 txt = "absolute";
399 break;
400
401 default:
402 BUG();
403 }
404
405 ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd);
406 if (ptr->nbtn)
407 input_dev->evbit[0] |= BIT_MASK(EV_KEY);
408
409 btntype = BTN_MISC;
410 if ((did & HIL_IDD_DID_ABS_TABLET_MASK) == HIL_IDD_DID_ABS_TABLET)
411 #ifdef TABLET_SIMULATES_MOUSE
412 btntype = BTN_TOUCH;
413 #else
414 btntype = BTN_DIGI;
415 #endif
416 if ((did & HIL_IDD_DID_ABS_TSCREEN_MASK) == HIL_IDD_DID_ABS_TSCREEN)
417 btntype = BTN_TOUCH;
418
419 if ((did & HIL_IDD_DID_REL_MOUSE_MASK) == HIL_IDD_DID_REL_MOUSE)
420 btntype = BTN_MOUSE;
421
422 for (i = 0; i < ptr->nbtn; i++) {
423 __set_bit(btntype | i, input_dev->keybit);
424 ptr->btnmap[i] = btntype | i;
425 }
426
427 if (btntype == BTN_MOUSE) {
428 /* Swap buttons 2 and 3 */
429 ptr->btnmap[1] = BTN_MIDDLE;
430 ptr->btnmap[2] = BTN_RIGHT;
431 }
432
433 input_dev->name = strlen(ptr->rnm) ? ptr->rnm : "HIL pointer device";
434
435 printk(KERN_INFO PREFIX
436 "HIL pointer device found (did: 0x%02x, axis: %s)\n",
437 did, txt);
438 printk(KERN_INFO PREFIX
439 "HIL pointer has %i buttons and %i sets of %i axes\n",
440 ptr->nbtn, naxsets, ptr->naxes);
441 }
442
443 static int hil_dev_connect(struct serio *serio, struct serio_driver *drv)
444 {
445 struct hil_dev *dev;
446 struct input_dev *input_dev;
447 uint8_t did, *idd;
448 int error;
449
450 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
451 input_dev = input_allocate_device();
452 if (!dev || !input_dev) {
453 error = -ENOMEM;
454 goto bail0;
455 }
456
457 dev->serio = serio;
458 dev->dev = input_dev;
459
460 error = serio_open(serio, drv);
461 if (error)
462 goto bail0;
463
464 serio_set_drvdata(serio, dev);
465
466 /* Get device info. MLC driver supplies devid/status/etc. */
467 init_completion(&dev->cmd_done);
468 serio_write(serio, 0);
469 serio_write(serio, 0);
470 serio_write(serio, HIL_PKT_CMD >> 8);
471 serio_write(serio, HIL_CMD_IDD);
472 error = wait_for_completion_killable(&dev->cmd_done);
473 if (error)
474 goto bail1;
475
476 reinit_completion(&dev->cmd_done);
477 serio_write(serio, 0);
478 serio_write(serio, 0);
479 serio_write(serio, HIL_PKT_CMD >> 8);
480 serio_write(serio, HIL_CMD_RSC);
481 error = wait_for_completion_killable(&dev->cmd_done);
482 if (error)
483 goto bail1;
484
485 reinit_completion(&dev->cmd_done);
486 serio_write(serio, 0);
487 serio_write(serio, 0);
488 serio_write(serio, HIL_PKT_CMD >> 8);
489 serio_write(serio, HIL_CMD_RNM);
490 error = wait_for_completion_killable(&dev->cmd_done);
491 if (error)
492 goto bail1;
493
494 reinit_completion(&dev->cmd_done);
495 serio_write(serio, 0);
496 serio_write(serio, 0);
497 serio_write(serio, HIL_PKT_CMD >> 8);
498 serio_write(serio, HIL_CMD_EXD);
499 error = wait_for_completion_killable(&dev->cmd_done);
500 if (error)
501 goto bail1;
502
503 did = dev->idd[0];
504 idd = dev->idd + 1;
505
506 switch (did & HIL_IDD_DID_TYPE_MASK) {
507 case HIL_IDD_DID_TYPE_KB_INTEGRAL:
508 case HIL_IDD_DID_TYPE_KB_ITF:
509 case HIL_IDD_DID_TYPE_KB_RSVD:
510 case HIL_IDD_DID_TYPE_CHAR:
511 if (HIL_IDD_NUM_BUTTONS(idd) ||
512 HIL_IDD_NUM_AXES_PER_SET(*idd)) {
513 printk(KERN_INFO PREFIX
514 "combo devices are not supported.\n");
515 goto bail1;
516 }
517
518 dev->is_pointer = false;
519 hil_dev_keyboard_setup(dev);
520 break;
521
522 case HIL_IDD_DID_TYPE_REL:
523 case HIL_IDD_DID_TYPE_ABS:
524 dev->is_pointer = true;
525 hil_dev_pointer_setup(dev);
526 break;
527
528 default:
529 goto bail1;
530 }
531
532 input_dev->id.bustype = BUS_HIL;
533 input_dev->id.vendor = PCI_VENDOR_ID_HP;
534 input_dev->id.product = 0x0001; /* TODO: get from kbd->rsc */
535 input_dev->id.version = 0x0100; /* TODO: get from kbd->rsc */
536 input_dev->dev.parent = &serio->dev;
537
538 if (!dev->is_pointer) {
539 serio_write(serio, 0);
540 serio_write(serio, 0);
541 serio_write(serio, HIL_PKT_CMD >> 8);
542 /* Enable Keyswitch Autorepeat 1 */
543 serio_write(serio, HIL_CMD_EK1);
544 /* No need to wait for completion */
545 }
546
547 error = input_register_device(input_dev);
548 if (error)
549 goto bail1;
550
551 return 0;
552
553 bail1:
554 serio_close(serio);
555 serio_set_drvdata(serio, NULL);
556 bail0:
557 input_free_device(input_dev);
558 kfree(dev);
559 return error;
560 }
561
562 static const struct serio_device_id hil_dev_ids[] = {
563 {
564 .type = SERIO_HIL_MLC,
565 .proto = SERIO_HIL,
566 .id = SERIO_ANY,
567 .extra = SERIO_ANY,
568 },
569 { 0 }
570 };
571
572 MODULE_DEVICE_TABLE(serio, hil_dev_ids);
573
574 static struct serio_driver hil_serio_drv = {
575 .driver = {
576 .name = "hil_dev",
577 },
578 .description = "HP HIL keyboard/mouse/tablet driver",
579 .id_table = hil_dev_ids,
580 .connect = hil_dev_connect,
581 .disconnect = hil_dev_disconnect,
582 .interrupt = hil_dev_interrupt
583 };
584
585 module_serio_driver(hil_serio_drv);
Linux with added FPC-III support