1 // SPDX-License-Identifier: GPL-2.0-only
3 * SGI O2 MACE PS2 controller driver for linux
5 * Copyright (C) 2002 Vivien Chappelier
7 #include <linux/module.h>
8 #include <linux/init.h>
9 #include <linux/serio.h>
10 #include <linux/errno.h>
11 #include <linux/interrupt.h>
12 #include <linux/ioport.h>
13 #include <linux/delay.h>
14 #include <linux/platform_device.h>
15 #include <linux/slab.h>
16 #include <linux/spinlock.h>
17 #include <linux/err.h>
21 #include <asm/ip32/mace.h>
22 #include <asm/ip32/ip32_ints.h>
24 MODULE_AUTHOR("Vivien Chappelier <vivien.chappelier@linux-mips.org");
25 MODULE_DESCRIPTION("SGI O2 MACE PS2 controller driver");
26 MODULE_LICENSE("GPL");
28 #define MACE_PS2_TIMEOUT 10000 /* in 50us unit */
30 #define PS2_STATUS_CLOCK_SIGNAL BIT(0) /* external clock signal */
31 #define PS2_STATUS_CLOCK_INHIBIT BIT(1) /* clken output signal */
32 #define PS2_STATUS_TX_INPROGRESS BIT(2) /* transmission in progress */
33 #define PS2_STATUS_TX_EMPTY BIT(3) /* empty transmit buffer */
34 #define PS2_STATUS_RX_FULL BIT(4) /* full receive buffer */
35 #define PS2_STATUS_RX_INPROGRESS BIT(5) /* reception in progress */
36 #define PS2_STATUS_ERROR_PARITY BIT(6) /* parity error */
37 #define PS2_STATUS_ERROR_FRAMING BIT(7) /* framing error */
39 #define PS2_CONTROL_TX_CLOCK_DISABLE BIT(0) /* inhibit clock signal after TX */
40 #define PS2_CONTROL_TX_ENABLE BIT(1) /* transmit enable */
41 #define PS2_CONTROL_TX_INT_ENABLE BIT(2) /* enable transmit interrupt */
42 #define PS2_CONTROL_RX_INT_ENABLE BIT(3) /* enable receive interrupt */
43 #define PS2_CONTROL_RX_CLOCK_ENABLE BIT(4) /* pause reception if set to 0 */
44 #define PS2_CONTROL_RESET BIT(5) /* reset */
47 struct mace_ps2port
*port
;
51 static struct maceps2_data port_data
[2];
52 static struct serio
*maceps2_port
[2];
53 static struct platform_device
*maceps2_device
;
55 static int maceps2_write(struct serio
*dev
, unsigned char val
)
57 struct mace_ps2port
*port
= ((struct maceps2_data
*)dev
->port_data
)->port
;
58 unsigned int timeout
= MACE_PS2_TIMEOUT
;
61 if (port
->status
& PS2_STATUS_TX_EMPTY
) {
71 static irqreturn_t
maceps2_interrupt(int irq
, void *dev_id
)
73 struct serio
*dev
= dev_id
;
74 struct mace_ps2port
*port
= ((struct maceps2_data
*)dev
->port_data
)->port
;
77 if (port
->status
& PS2_STATUS_RX_FULL
) {
79 serio_interrupt(dev
, byte
& 0xff, 0);
85 static int maceps2_open(struct serio
*dev
)
87 struct maceps2_data
*data
= (struct maceps2_data
*)dev
->port_data
;
89 if (request_irq(data
->irq
, maceps2_interrupt
, 0, "PS2 port", dev
)) {
90 printk(KERN_ERR
"Could not allocate PS/2 IRQ\n");
95 data
->port
->control
= PS2_CONTROL_TX_CLOCK_DISABLE
| PS2_CONTROL_RESET
;
98 /* Enable interrupts */
99 data
->port
->control
= PS2_CONTROL_RX_CLOCK_ENABLE
|
100 PS2_CONTROL_TX_ENABLE
|
101 PS2_CONTROL_RX_INT_ENABLE
;
106 static void maceps2_close(struct serio
*dev
)
108 struct maceps2_data
*data
= (struct maceps2_data
*)dev
->port_data
;
110 data
->port
->control
= PS2_CONTROL_TX_CLOCK_DISABLE
| PS2_CONTROL_RESET
;
112 free_irq(data
->irq
, dev
);
116 static struct serio
*maceps2_allocate_port(int idx
)
120 serio
= kzalloc(sizeof(struct serio
), GFP_KERNEL
);
122 serio
->id
.type
= SERIO_8042
;
123 serio
->write
= maceps2_write
;
124 serio
->open
= maceps2_open
;
125 serio
->close
= maceps2_close
;
126 snprintf(serio
->name
, sizeof(serio
->name
), "MACE PS/2 port%d", idx
);
127 snprintf(serio
->phys
, sizeof(serio
->phys
), "mace/serio%d", idx
);
128 serio
->port_data
= &port_data
[idx
];
129 serio
->dev
.parent
= &maceps2_device
->dev
;
135 static int maceps2_probe(struct platform_device
*dev
)
137 maceps2_port
[0] = maceps2_allocate_port(0);
138 maceps2_port
[1] = maceps2_allocate_port(1);
139 if (!maceps2_port
[0] || !maceps2_port
[1]) {
140 kfree(maceps2_port
[0]);
141 kfree(maceps2_port
[1]);
145 serio_register_port(maceps2_port
[0]);
146 serio_register_port(maceps2_port
[1]);
151 static int maceps2_remove(struct platform_device
*dev
)
153 serio_unregister_port(maceps2_port
[0]);
154 serio_unregister_port(maceps2_port
[1]);
159 static struct platform_driver maceps2_driver
= {
163 .probe
= maceps2_probe
,
164 .remove
= maceps2_remove
,
167 static int __init
maceps2_init(void)
171 error
= platform_driver_register(&maceps2_driver
);
175 maceps2_device
= platform_device_alloc("maceps2", -1);
176 if (!maceps2_device
) {
178 goto err_unregister_driver
;
181 port_data
[0].port
= &mace
->perif
.ps2
.keyb
;
182 port_data
[0].irq
= MACEISA_KEYB_IRQ
;
183 port_data
[1].port
= &mace
->perif
.ps2
.mouse
;
184 port_data
[1].irq
= MACEISA_MOUSE_IRQ
;
186 error
= platform_device_add(maceps2_device
);
188 goto err_free_device
;
193 platform_device_put(maceps2_device
);
194 err_unregister_driver
:
195 platform_driver_unregister(&maceps2_driver
);
199 static void __exit
maceps2_exit(void)
201 platform_device_unregister(maceps2_device
);
202 platform_driver_unregister(&maceps2_driver
);
205 module_init(maceps2_init
);
206 module_exit(maceps2_exit
);