treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / input / touchscreen / tps6507x-ts.c
blob357a3108f2e57050351133e37d592f97f3d46373
1 /*
2 * Touchscreen driver for the tps6507x chip.
4 * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
6 * Credits:
8 * Using code from tsc2007, MtekVision Co., Ltd.
10 * For licencing details see kernel-base/COPYING
12 * TPS65070, TPS65073, TPS650731, and TPS650732 support
13 * 10 bit touch screen interface.
16 #include <linux/module.h>
17 #include <linux/workqueue.h>
18 #include <linux/slab.h>
19 #include <linux/input.h>
20 #include <linux/platform_device.h>
21 #include <linux/mfd/tps6507x.h>
22 #include <linux/input/tps6507x-ts.h>
23 #include <linux/delay.h>
25 #define TSC_DEFAULT_POLL_PERIOD 30 /* ms */
26 #define TPS_DEFAULT_MIN_PRESSURE 0x30
27 #define MAX_10BIT ((1 << 10) - 1)
29 #define TPS6507X_ADCONFIG_CONVERT_TS (TPS6507X_ADCONFIG_AD_ENABLE | \
30 TPS6507X_ADCONFIG_START_CONVERSION | \
31 TPS6507X_ADCONFIG_INPUT_REAL_TSC)
32 #define TPS6507X_ADCONFIG_POWER_DOWN_TS (TPS6507X_ADCONFIG_INPUT_REAL_TSC)
34 struct ts_event {
35 u16 x;
36 u16 y;
37 u16 pressure;
40 struct tps6507x_ts {
41 struct device *dev;
42 struct input_dev *input;
43 struct tps6507x_dev *mfd;
44 char phys[32];
45 struct ts_event tc;
46 u16 min_pressure;
47 bool pendown;
50 static int tps6507x_read_u8(struct tps6507x_ts *tsc, u8 reg, u8 *data)
52 return tsc->mfd->read_dev(tsc->mfd, reg, 1, data);
55 static int tps6507x_write_u8(struct tps6507x_ts *tsc, u8 reg, u8 data)
57 return tsc->mfd->write_dev(tsc->mfd, reg, 1, &data);
60 static s32 tps6507x_adc_conversion(struct tps6507x_ts *tsc,
61 u8 tsc_mode, u16 *value)
63 s32 ret;
64 u8 adc_status;
65 u8 result;
67 /* Route input signal to A/D converter */
69 ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE, tsc_mode);
70 if (ret) {
71 dev_err(tsc->dev, "TSC mode read failed\n");
72 goto err;
75 /* Start A/D conversion */
77 ret = tps6507x_write_u8(tsc, TPS6507X_REG_ADCONFIG,
78 TPS6507X_ADCONFIG_CONVERT_TS);
79 if (ret) {
80 dev_err(tsc->dev, "ADC config write failed\n");
81 return ret;
84 do {
85 ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADCONFIG,
86 &adc_status);
87 if (ret) {
88 dev_err(tsc->dev, "ADC config read failed\n");
89 goto err;
91 } while (adc_status & TPS6507X_ADCONFIG_START_CONVERSION);
93 ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_2, &result);
94 if (ret) {
95 dev_err(tsc->dev, "ADC result 2 read failed\n");
96 goto err;
99 *value = (result & TPS6507X_REG_ADRESULT_2_MASK) << 8;
101 ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_1, &result);
102 if (ret) {
103 dev_err(tsc->dev, "ADC result 1 read failed\n");
104 goto err;
107 *value |= result;
109 dev_dbg(tsc->dev, "TSC channel %d = 0x%X\n", tsc_mode, *value);
111 err:
112 return ret;
115 /* Need to call tps6507x_adc_standby() after using A/D converter for the
116 * touch screen interrupt to work properly.
119 static s32 tps6507x_adc_standby(struct tps6507x_ts *tsc)
121 s32 ret;
122 s32 loops = 0;
123 u8 val;
125 ret = tps6507x_write_u8(tsc, TPS6507X_REG_ADCONFIG,
126 TPS6507X_ADCONFIG_INPUT_TSC);
127 if (ret)
128 return ret;
130 ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE,
131 TPS6507X_TSCMODE_STANDBY);
132 if (ret)
133 return ret;
135 ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val);
136 if (ret)
137 return ret;
139 while (val & TPS6507X_REG_TSC_INT) {
140 mdelay(10);
141 ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val);
142 if (ret)
143 return ret;
144 loops++;
147 return ret;
150 static void tps6507x_ts_poll(struct input_dev *input_dev)
152 struct tps6507x_ts *tsc = input_get_drvdata(input_dev);
153 bool pendown;
154 s32 ret;
156 ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_PRESSURE,
157 &tsc->tc.pressure);
158 if (ret)
159 goto done;
161 pendown = tsc->tc.pressure > tsc->min_pressure;
163 if (unlikely(!pendown && tsc->pendown)) {
164 dev_dbg(tsc->dev, "UP\n");
165 input_report_key(input_dev, BTN_TOUCH, 0);
166 input_report_abs(input_dev, ABS_PRESSURE, 0);
167 input_sync(input_dev);
168 tsc->pendown = false;
171 if (pendown) {
173 if (!tsc->pendown) {
174 dev_dbg(tsc->dev, "DOWN\n");
175 input_report_key(input_dev, BTN_TOUCH, 1);
176 } else
177 dev_dbg(tsc->dev, "still down\n");
179 ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_X_POSITION,
180 &tsc->tc.x);
181 if (ret)
182 goto done;
184 ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_Y_POSITION,
185 &tsc->tc.y);
186 if (ret)
187 goto done;
189 input_report_abs(input_dev, ABS_X, tsc->tc.x);
190 input_report_abs(input_dev, ABS_Y, tsc->tc.y);
191 input_report_abs(input_dev, ABS_PRESSURE, tsc->tc.pressure);
192 input_sync(input_dev);
193 tsc->pendown = true;
196 done:
197 tps6507x_adc_standby(tsc);
200 static int tps6507x_ts_probe(struct platform_device *pdev)
202 struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
203 const struct tps6507x_board *tps_board;
204 const struct touchscreen_init_data *init_data;
205 struct tps6507x_ts *tsc;
206 struct input_dev *input_dev;
207 int error;
210 * tps_board points to pmic related constants
211 * coming from the board-evm file.
213 tps_board = dev_get_platdata(tps6507x_dev->dev);
214 if (!tps_board) {
215 dev_err(tps6507x_dev->dev,
216 "Could not find tps6507x platform data\n");
217 return -ENODEV;
221 * init_data points to array of regulator_init structures
222 * coming from the board-evm file.
224 init_data = tps_board->tps6507x_ts_init_data;
226 tsc = devm_kzalloc(&pdev->dev, sizeof(struct tps6507x_ts), GFP_KERNEL);
227 if (!tsc) {
228 dev_err(tps6507x_dev->dev, "failed to allocate driver data\n");
229 return -ENOMEM;
232 tsc->mfd = tps6507x_dev;
233 tsc->dev = tps6507x_dev->dev;
234 tsc->min_pressure = init_data ?
235 init_data->min_pressure : TPS_DEFAULT_MIN_PRESSURE;
237 snprintf(tsc->phys, sizeof(tsc->phys),
238 "%s/input0", dev_name(tsc->dev));
240 input_dev = devm_input_allocate_device(&pdev->dev);
241 if (!input_dev) {
242 dev_err(tsc->dev, "Failed to allocate polled input device.\n");
243 return -ENOMEM;
246 tsc->input = input_dev;
247 input_set_drvdata(input_dev, tsc);
249 input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
250 input_set_abs_params(input_dev, ABS_X, 0, MAX_10BIT, 0, 0);
251 input_set_abs_params(input_dev, ABS_Y, 0, MAX_10BIT, 0, 0);
252 input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_10BIT, 0, 0);
254 input_dev->name = "TPS6507x Touchscreen";
255 input_dev->phys = tsc->phys;
256 input_dev->dev.parent = tsc->dev;
257 input_dev->id.bustype = BUS_I2C;
258 if (init_data) {
259 input_dev->id.vendor = init_data->vendor;
260 input_dev->id.product = init_data->product;
261 input_dev->id.version = init_data->version;
264 error = tps6507x_adc_standby(tsc);
265 if (error)
266 return error;
268 error = input_setup_polling(input_dev, tps6507x_ts_poll);
269 if (error)
270 return error;
272 input_set_poll_interval(input_dev,
273 init_data ? init_data->poll_period :
274 TSC_DEFAULT_POLL_PERIOD);
276 error = input_register_device(input_dev);
277 if (error)
278 return error;
280 return 0;
283 static struct platform_driver tps6507x_ts_driver = {
284 .driver = {
285 .name = "tps6507x-ts",
287 .probe = tps6507x_ts_probe,
289 module_platform_driver(tps6507x_ts_driver);
291 MODULE_AUTHOR("Todd Fischer <todd.fischer@ridgerun.com>");
292 MODULE_DESCRIPTION("TPS6507x - TouchScreen driver");
293 MODULE_LICENSE("GPL v2");
294 MODULE_ALIAS("platform:tps6507x-ts");