2 * Copyright (C) 2003 Sistina Software Limited.
3 * Copyright (C) 2005-2008 Red Hat, Inc. All rights reserved.
5 * This file is released under the GPL.
8 #include "dm-bio-record.h"
10 #include <linux/init.h>
11 #include <linux/mempool.h>
12 #include <linux/module.h>
13 #include <linux/pagemap.h>
14 #include <linux/slab.h>
15 #include <linux/workqueue.h>
16 #include <linux/device-mapper.h>
17 #include <linux/dm-io.h>
18 #include <linux/dm-dirty-log.h>
19 #include <linux/dm-kcopyd.h>
20 #include <linux/dm-region-hash.h>
22 #define DM_MSG_PREFIX "raid1"
24 #define MAX_RECOVERY 1 /* Maximum number of regions recovered in parallel. */
26 #define MAX_NR_MIRRORS (DM_KCOPYD_MAX_REGIONS + 1)
28 #define DM_RAID1_HANDLE_ERRORS 0x01
29 #define DM_RAID1_KEEP_LOG 0x02
30 #define errors_handled(p) ((p)->features & DM_RAID1_HANDLE_ERRORS)
31 #define keep_log(p) ((p)->features & DM_RAID1_KEEP_LOG)
33 static DECLARE_WAIT_QUEUE_HEAD(_kmirrord_recovery_stopped
);
35 /*-----------------------------------------------------------------
36 * Mirror set structures.
37 *---------------------------------------------------------------*/
46 struct mirror_set
*ms
;
48 unsigned long error_type
;
55 struct list_head list
;
59 spinlock_t lock
; /* protects the lists */
60 struct bio_list reads
;
61 struct bio_list writes
;
62 struct bio_list failures
;
63 struct bio_list holds
; /* bios are waiting until suspend */
65 struct dm_region_hash
*rh
;
66 struct dm_kcopyd_client
*kcopyd_client
;
67 struct dm_io_client
*io_client
;
76 atomic_t default_mirror
; /* Default mirror */
78 struct workqueue_struct
*kmirrord_wq
;
79 struct work_struct kmirrord_work
;
80 struct timer_list timer
;
81 unsigned long timer_pending
;
83 struct work_struct trigger_event
;
86 struct mirror mirror
[0];
89 DECLARE_DM_KCOPYD_THROTTLE_WITH_MODULE_PARM(raid1_resync_throttle
,
90 "A percentage of time allocated for raid resynchronization");
92 static void wakeup_mirrord(void *context
)
94 struct mirror_set
*ms
= context
;
96 queue_work(ms
->kmirrord_wq
, &ms
->kmirrord_work
);
99 static void delayed_wake_fn(struct timer_list
*t
)
101 struct mirror_set
*ms
= from_timer(ms
, t
, timer
);
103 clear_bit(0, &ms
->timer_pending
);
107 static void delayed_wake(struct mirror_set
*ms
)
109 if (test_and_set_bit(0, &ms
->timer_pending
))
112 ms
->timer
.expires
= jiffies
+ HZ
/ 5;
113 add_timer(&ms
->timer
);
116 static void wakeup_all_recovery_waiters(void *context
)
118 wake_up_all(&_kmirrord_recovery_stopped
);
121 static void queue_bio(struct mirror_set
*ms
, struct bio
*bio
, int rw
)
127 bl
= (rw
== WRITE
) ? &ms
->writes
: &ms
->reads
;
128 spin_lock_irqsave(&ms
->lock
, flags
);
129 should_wake
= !(bl
->head
);
130 bio_list_add(bl
, bio
);
131 spin_unlock_irqrestore(&ms
->lock
, flags
);
137 static void dispatch_bios(void *context
, struct bio_list
*bio_list
)
139 struct mirror_set
*ms
= context
;
142 while ((bio
= bio_list_pop(bio_list
)))
143 queue_bio(ms
, bio
, WRITE
);
146 struct dm_raid1_bio_record
{
148 /* if details->bi_disk == NULL, details were not saved */
149 struct dm_bio_details details
;
150 region_t write_region
;
154 * Every mirror should look like this one.
156 #define DEFAULT_MIRROR 0
159 * This is yucky. We squirrel the mirror struct away inside
160 * bi_next for read/write buffers. This is safe since the bh
161 * doesn't get submitted to the lower levels of block layer.
163 static struct mirror
*bio_get_m(struct bio
*bio
)
165 return (struct mirror
*) bio
->bi_next
;
168 static void bio_set_m(struct bio
*bio
, struct mirror
*m
)
170 bio
->bi_next
= (struct bio
*) m
;
173 static struct mirror
*get_default_mirror(struct mirror_set
*ms
)
175 return &ms
->mirror
[atomic_read(&ms
->default_mirror
)];
178 static void set_default_mirror(struct mirror
*m
)
180 struct mirror_set
*ms
= m
->ms
;
181 struct mirror
*m0
= &(ms
->mirror
[0]);
183 atomic_set(&ms
->default_mirror
, m
- m0
);
186 static struct mirror
*get_valid_mirror(struct mirror_set
*ms
)
190 for (m
= ms
->mirror
; m
< ms
->mirror
+ ms
->nr_mirrors
; m
++)
191 if (!atomic_read(&m
->error_count
))
198 * @m: mirror device to fail
199 * @error_type: one of the enum's, DM_RAID1_*_ERROR
201 * If errors are being handled, record the type of
202 * error encountered for this device. If this type
203 * of error has already been recorded, we can return;
204 * otherwise, we must signal userspace by triggering
205 * an event. Additionally, if the device is the
206 * primary device, we must choose a new primary, but
207 * only if the mirror is in-sync.
209 * This function must not block.
211 static void fail_mirror(struct mirror
*m
, enum dm_raid1_error error_type
)
213 struct mirror_set
*ms
= m
->ms
;
219 * error_count is used for nothing more than a
220 * simple way to tell if a device has encountered
223 atomic_inc(&m
->error_count
);
225 if (test_and_set_bit(error_type
, &m
->error_type
))
228 if (!errors_handled(ms
))
231 if (m
!= get_default_mirror(ms
))
234 if (!ms
->in_sync
&& !keep_log(ms
)) {
236 * Better to issue requests to same failing device
237 * than to risk returning corrupt data.
239 DMERR("Primary mirror (%s) failed while out-of-sync: "
240 "Reads may fail.", m
->dev
->name
);
244 new = get_valid_mirror(ms
);
246 set_default_mirror(new);
248 DMWARN("All sides of mirror have failed.");
251 schedule_work(&ms
->trigger_event
);
254 static int mirror_flush(struct dm_target
*ti
)
256 struct mirror_set
*ms
= ti
->private;
257 unsigned long error_bits
;
260 struct dm_io_region io
[MAX_NR_MIRRORS
];
262 struct dm_io_request io_req
= {
263 .bi_op
= REQ_OP_WRITE
,
264 .bi_op_flags
= REQ_PREFLUSH
| REQ_SYNC
,
265 .mem
.type
= DM_IO_KMEM
,
266 .mem
.ptr
.addr
= NULL
,
267 .client
= ms
->io_client
,
270 for (i
= 0, m
= ms
->mirror
; i
< ms
->nr_mirrors
; i
++, m
++) {
271 io
[i
].bdev
= m
->dev
->bdev
;
277 dm_io(&io_req
, ms
->nr_mirrors
, io
, &error_bits
);
278 if (unlikely(error_bits
!= 0)) {
279 for (i
= 0; i
< ms
->nr_mirrors
; i
++)
280 if (test_bit(i
, &error_bits
))
281 fail_mirror(ms
->mirror
+ i
,
282 DM_RAID1_FLUSH_ERROR
);
289 /*-----------------------------------------------------------------
292 * When a mirror is first activated we may find that some regions
293 * are in the no-sync state. We have to recover these by
294 * recopying from the default mirror to all the others.
295 *---------------------------------------------------------------*/
296 static void recovery_complete(int read_err
, unsigned long write_err
,
299 struct dm_region
*reg
= context
;
300 struct mirror_set
*ms
= dm_rh_region_context(reg
);
304 /* Read error means the failure of default mirror. */
305 DMERR_LIMIT("Unable to read primary mirror during recovery");
306 fail_mirror(get_default_mirror(ms
), DM_RAID1_SYNC_ERROR
);
310 DMERR_LIMIT("Write error during recovery (error = 0x%lx)",
313 * Bits correspond to devices (excluding default mirror).
314 * The default mirror cannot change during recovery.
316 for (m
= 0; m
< ms
->nr_mirrors
; m
++) {
317 if (&ms
->mirror
[m
] == get_default_mirror(ms
))
319 if (test_bit(bit
, &write_err
))
320 fail_mirror(ms
->mirror
+ m
,
321 DM_RAID1_SYNC_ERROR
);
326 dm_rh_recovery_end(reg
, !(read_err
|| write_err
));
329 static void recover(struct mirror_set
*ms
, struct dm_region
*reg
)
332 struct dm_io_region from
, to
[DM_KCOPYD_MAX_REGIONS
], *dest
;
334 unsigned long flags
= 0;
335 region_t key
= dm_rh_get_region_key(reg
);
336 sector_t region_size
= dm_rh_get_region_size(ms
->rh
);
338 /* fill in the source */
339 m
= get_default_mirror(ms
);
340 from
.bdev
= m
->dev
->bdev
;
341 from
.sector
= m
->offset
+ dm_rh_region_to_sector(ms
->rh
, key
);
342 if (key
== (ms
->nr_regions
- 1)) {
344 * The final region may be smaller than
347 from
.count
= ms
->ti
->len
& (region_size
- 1);
349 from
.count
= region_size
;
351 from
.count
= region_size
;
353 /* fill in the destinations */
354 for (i
= 0, dest
= to
; i
< ms
->nr_mirrors
; i
++) {
355 if (&ms
->mirror
[i
] == get_default_mirror(ms
))
359 dest
->bdev
= m
->dev
->bdev
;
360 dest
->sector
= m
->offset
+ dm_rh_region_to_sector(ms
->rh
, key
);
361 dest
->count
= from
.count
;
366 if (!errors_handled(ms
))
367 set_bit(DM_KCOPYD_IGNORE_ERROR
, &flags
);
369 dm_kcopyd_copy(ms
->kcopyd_client
, &from
, ms
->nr_mirrors
- 1, to
,
370 flags
, recovery_complete
, reg
);
373 static void reset_ms_flags(struct mirror_set
*ms
)
378 for (m
= 0; m
< ms
->nr_mirrors
; m
++) {
379 atomic_set(&(ms
->mirror
[m
].error_count
), 0);
380 ms
->mirror
[m
].error_type
= 0;
384 static void do_recovery(struct mirror_set
*ms
)
386 struct dm_region
*reg
;
387 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
390 * Start quiescing some regions.
392 dm_rh_recovery_prepare(ms
->rh
);
395 * Copy any already quiesced regions.
397 while ((reg
= dm_rh_recovery_start(ms
->rh
)))
401 * Update the in sync flag.
404 (log
->type
->get_sync_count(log
) == ms
->nr_regions
)) {
405 /* the sync is complete */
406 dm_table_event(ms
->ti
->table
);
412 /*-----------------------------------------------------------------
414 *---------------------------------------------------------------*/
415 static struct mirror
*choose_mirror(struct mirror_set
*ms
, sector_t sector
)
417 struct mirror
*m
= get_default_mirror(ms
);
420 if (likely(!atomic_read(&m
->error_count
)))
423 if (m
-- == ms
->mirror
)
425 } while (m
!= get_default_mirror(ms
));
430 static int default_ok(struct mirror
*m
)
432 struct mirror
*default_mirror
= get_default_mirror(m
->ms
);
434 return !atomic_read(&default_mirror
->error_count
);
437 static int mirror_available(struct mirror_set
*ms
, struct bio
*bio
)
439 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
440 region_t region
= dm_rh_bio_to_region(ms
->rh
, bio
);
442 if (log
->type
->in_sync(log
, region
, 0))
443 return choose_mirror(ms
, bio
->bi_iter
.bi_sector
) ? 1 : 0;
449 * remap a buffer to a particular mirror.
451 static sector_t
map_sector(struct mirror
*m
, struct bio
*bio
)
453 if (unlikely(!bio
->bi_iter
.bi_size
))
455 return m
->offset
+ dm_target_offset(m
->ms
->ti
, bio
->bi_iter
.bi_sector
);
458 static void map_bio(struct mirror
*m
, struct bio
*bio
)
460 bio_set_dev(bio
, m
->dev
->bdev
);
461 bio
->bi_iter
.bi_sector
= map_sector(m
, bio
);
464 static void map_region(struct dm_io_region
*io
, struct mirror
*m
,
467 io
->bdev
= m
->dev
->bdev
;
468 io
->sector
= map_sector(m
, bio
);
469 io
->count
= bio_sectors(bio
);
472 static void hold_bio(struct mirror_set
*ms
, struct bio
*bio
)
475 * Lock is required to avoid race condition during suspend
478 spin_lock_irq(&ms
->lock
);
480 if (atomic_read(&ms
->suspend
)) {
481 spin_unlock_irq(&ms
->lock
);
484 * If device is suspended, complete the bio.
486 if (dm_noflush_suspending(ms
->ti
))
487 bio
->bi_status
= BLK_STS_DM_REQUEUE
;
489 bio
->bi_status
= BLK_STS_IOERR
;
496 * Hold bio until the suspend is complete.
498 bio_list_add(&ms
->holds
, bio
);
499 spin_unlock_irq(&ms
->lock
);
502 /*-----------------------------------------------------------------
504 *---------------------------------------------------------------*/
505 static void read_callback(unsigned long error
, void *context
)
507 struct bio
*bio
= context
;
511 bio_set_m(bio
, NULL
);
513 if (likely(!error
)) {
518 fail_mirror(m
, DM_RAID1_READ_ERROR
);
520 if (likely(default_ok(m
)) || mirror_available(m
->ms
, bio
)) {
521 DMWARN_LIMIT("Read failure on mirror device %s. "
522 "Trying alternative device.",
524 queue_bio(m
->ms
, bio
, bio_data_dir(bio
));
528 DMERR_LIMIT("Read failure on mirror device %s. Failing I/O.",
533 /* Asynchronous read. */
534 static void read_async_bio(struct mirror
*m
, struct bio
*bio
)
536 struct dm_io_region io
;
537 struct dm_io_request io_req
= {
538 .bi_op
= REQ_OP_READ
,
540 .mem
.type
= DM_IO_BIO
,
542 .notify
.fn
= read_callback
,
543 .notify
.context
= bio
,
544 .client
= m
->ms
->io_client
,
547 map_region(&io
, m
, bio
);
549 BUG_ON(dm_io(&io_req
, 1, &io
, NULL
));
552 static inline int region_in_sync(struct mirror_set
*ms
, region_t region
,
555 int state
= dm_rh_get_state(ms
->rh
, region
, may_block
);
556 return state
== DM_RH_CLEAN
|| state
== DM_RH_DIRTY
;
559 static void do_reads(struct mirror_set
*ms
, struct bio_list
*reads
)
565 while ((bio
= bio_list_pop(reads
))) {
566 region
= dm_rh_bio_to_region(ms
->rh
, bio
);
567 m
= get_default_mirror(ms
);
570 * We can only read balance if the region is in sync.
572 if (likely(region_in_sync(ms
, region
, 1)))
573 m
= choose_mirror(ms
, bio
->bi_iter
.bi_sector
);
574 else if (m
&& atomic_read(&m
->error_count
))
578 read_async_bio(m
, bio
);
584 /*-----------------------------------------------------------------
587 * We do different things with the write io depending on the
588 * state of the region that it's in:
590 * SYNC: increment pending, use kcopyd to write to *all* mirrors
591 * RECOVERING: delay the io until recovery completes
592 * NOSYNC: increment pending, just write to the default mirror
593 *---------------------------------------------------------------*/
596 static void write_callback(unsigned long error
, void *context
)
599 struct bio
*bio
= (struct bio
*) context
;
600 struct mirror_set
*ms
;
604 ms
= bio_get_m(bio
)->ms
;
605 bio_set_m(bio
, NULL
);
608 * NOTE: We don't decrement the pending count here,
609 * instead it is done by the targets endio function.
610 * This way we handle both writes to SYNC and NOSYNC
611 * regions with the same code.
613 if (likely(!error
)) {
619 * If the bio is discard, return an error, but do not
622 if (bio_op(bio
) == REQ_OP_DISCARD
) {
623 bio
->bi_status
= BLK_STS_NOTSUPP
;
628 for (i
= 0; i
< ms
->nr_mirrors
; i
++)
629 if (test_bit(i
, &error
))
630 fail_mirror(ms
->mirror
+ i
, DM_RAID1_WRITE_ERROR
);
633 * Need to raise event. Since raising
634 * events can block, we need to do it in
637 spin_lock_irqsave(&ms
->lock
, flags
);
638 if (!ms
->failures
.head
)
640 bio_list_add(&ms
->failures
, bio
);
641 spin_unlock_irqrestore(&ms
->lock
, flags
);
646 static void do_write(struct mirror_set
*ms
, struct bio
*bio
)
649 struct dm_io_region io
[MAX_NR_MIRRORS
], *dest
= io
;
651 struct dm_io_request io_req
= {
652 .bi_op
= REQ_OP_WRITE
,
653 .bi_op_flags
= bio
->bi_opf
& (REQ_FUA
| REQ_PREFLUSH
),
654 .mem
.type
= DM_IO_BIO
,
656 .notify
.fn
= write_callback
,
657 .notify
.context
= bio
,
658 .client
= ms
->io_client
,
661 if (bio_op(bio
) == REQ_OP_DISCARD
) {
662 io_req
.bi_op
= REQ_OP_DISCARD
;
663 io_req
.mem
.type
= DM_IO_KMEM
;
664 io_req
.mem
.ptr
.addr
= NULL
;
667 for (i
= 0, m
= ms
->mirror
; i
< ms
->nr_mirrors
; i
++, m
++)
668 map_region(dest
++, m
, bio
);
671 * Use default mirror because we only need it to retrieve the reference
672 * to the mirror set in write_callback().
674 bio_set_m(bio
, get_default_mirror(ms
));
676 BUG_ON(dm_io(&io_req
, ms
->nr_mirrors
, io
, NULL
));
679 static void do_writes(struct mirror_set
*ms
, struct bio_list
*writes
)
683 struct bio_list sync
, nosync
, recover
, *this_list
= NULL
;
684 struct bio_list requeue
;
685 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
692 * Classify each write.
694 bio_list_init(&sync
);
695 bio_list_init(&nosync
);
696 bio_list_init(&recover
);
697 bio_list_init(&requeue
);
699 while ((bio
= bio_list_pop(writes
))) {
700 if ((bio
->bi_opf
& REQ_PREFLUSH
) ||
701 (bio_op(bio
) == REQ_OP_DISCARD
)) {
702 bio_list_add(&sync
, bio
);
706 region
= dm_rh_bio_to_region(ms
->rh
, bio
);
708 if (log
->type
->is_remote_recovering
&&
709 log
->type
->is_remote_recovering(log
, region
)) {
710 bio_list_add(&requeue
, bio
);
714 state
= dm_rh_get_state(ms
->rh
, region
, 1);
725 case DM_RH_RECOVERING
:
726 this_list
= &recover
;
730 bio_list_add(this_list
, bio
);
734 * Add bios that are delayed due to remote recovery
735 * back on to the write queue
737 if (unlikely(requeue
.head
)) {
738 spin_lock_irq(&ms
->lock
);
739 bio_list_merge(&ms
->writes
, &requeue
);
740 spin_unlock_irq(&ms
->lock
);
745 * Increment the pending counts for any regions that will
746 * be written to (writes to recover regions are going to
749 dm_rh_inc_pending(ms
->rh
, &sync
);
750 dm_rh_inc_pending(ms
->rh
, &nosync
);
753 * If the flush fails on a previous call and succeeds here,
754 * we must not reset the log_failure variable. We need
755 * userspace interaction to do that.
757 ms
->log_failure
= dm_rh_flush(ms
->rh
) ? 1 : ms
->log_failure
;
762 if (unlikely(ms
->log_failure
) && errors_handled(ms
)) {
763 spin_lock_irq(&ms
->lock
);
764 bio_list_merge(&ms
->failures
, &sync
);
765 spin_unlock_irq(&ms
->lock
);
768 while ((bio
= bio_list_pop(&sync
)))
771 while ((bio
= bio_list_pop(&recover
)))
772 dm_rh_delay(ms
->rh
, bio
);
774 while ((bio
= bio_list_pop(&nosync
))) {
775 if (unlikely(ms
->leg_failure
) && errors_handled(ms
) && !keep_log(ms
)) {
776 spin_lock_irq(&ms
->lock
);
777 bio_list_add(&ms
->failures
, bio
);
778 spin_unlock_irq(&ms
->lock
);
781 map_bio(get_default_mirror(ms
), bio
);
782 generic_make_request(bio
);
787 static void do_failures(struct mirror_set
*ms
, struct bio_list
*failures
)
791 if (likely(!failures
->head
))
795 * If the log has failed, unattempted writes are being
796 * put on the holds list. We can't issue those writes
797 * until a log has been marked, so we must store them.
799 * If a 'noflush' suspend is in progress, we can requeue
800 * the I/O's to the core. This give userspace a chance
801 * to reconfigure the mirror, at which point the core
802 * will reissue the writes. If the 'noflush' flag is
803 * not set, we have no choice but to return errors.
805 * Some writes on the failures list may have been
806 * submitted before the log failure and represent a
807 * failure to write to one of the devices. It is ok
808 * for us to treat them the same and requeue them
811 while ((bio
= bio_list_pop(failures
))) {
812 if (!ms
->log_failure
) {
814 dm_rh_mark_nosync(ms
->rh
, bio
);
818 * If all the legs are dead, fail the I/O.
819 * If the device has failed and keep_log is enabled,
822 * If we have been told to handle errors, and keep_log
823 * isn't enabled, hold the bio and wait for userspace to
824 * deal with the problem.
826 * Otherwise pretend that the I/O succeeded. (This would
827 * be wrong if the failed leg returned after reboot and
828 * got replicated back to the good legs.)
830 if (unlikely(!get_valid_mirror(ms
) || (keep_log(ms
) && ms
->log_failure
)))
832 else if (errors_handled(ms
) && !keep_log(ms
))
839 static void trigger_event(struct work_struct
*work
)
841 struct mirror_set
*ms
=
842 container_of(work
, struct mirror_set
, trigger_event
);
844 dm_table_event(ms
->ti
->table
);
847 /*-----------------------------------------------------------------
849 *---------------------------------------------------------------*/
850 static void do_mirror(struct work_struct
*work
)
852 struct mirror_set
*ms
= container_of(work
, struct mirror_set
,
854 struct bio_list reads
, writes
, failures
;
857 spin_lock_irqsave(&ms
->lock
, flags
);
860 failures
= ms
->failures
;
861 bio_list_init(&ms
->reads
);
862 bio_list_init(&ms
->writes
);
863 bio_list_init(&ms
->failures
);
864 spin_unlock_irqrestore(&ms
->lock
, flags
);
866 dm_rh_update_states(ms
->rh
, errors_handled(ms
));
868 do_reads(ms
, &reads
);
869 do_writes(ms
, &writes
);
870 do_failures(ms
, &failures
);
873 /*-----------------------------------------------------------------
875 *---------------------------------------------------------------*/
876 static struct mirror_set
*alloc_context(unsigned int nr_mirrors
,
877 uint32_t region_size
,
878 struct dm_target
*ti
,
879 struct dm_dirty_log
*dl
)
881 struct mirror_set
*ms
=
882 kzalloc(struct_size(ms
, mirror
, nr_mirrors
), GFP_KERNEL
);
885 ti
->error
= "Cannot allocate mirror context";
889 spin_lock_init(&ms
->lock
);
890 bio_list_init(&ms
->reads
);
891 bio_list_init(&ms
->writes
);
892 bio_list_init(&ms
->failures
);
893 bio_list_init(&ms
->holds
);
896 ms
->nr_mirrors
= nr_mirrors
;
897 ms
->nr_regions
= dm_sector_div_up(ti
->len
, region_size
);
901 atomic_set(&ms
->suspend
, 0);
902 atomic_set(&ms
->default_mirror
, DEFAULT_MIRROR
);
904 ms
->io_client
= dm_io_client_create();
905 if (IS_ERR(ms
->io_client
)) {
906 ti
->error
= "Error creating dm_io client";
911 ms
->rh
= dm_region_hash_create(ms
, dispatch_bios
, wakeup_mirrord
,
912 wakeup_all_recovery_waiters
,
913 ms
->ti
->begin
, MAX_RECOVERY
,
914 dl
, region_size
, ms
->nr_regions
);
915 if (IS_ERR(ms
->rh
)) {
916 ti
->error
= "Error creating dirty region hash";
917 dm_io_client_destroy(ms
->io_client
);
925 static void free_context(struct mirror_set
*ms
, struct dm_target
*ti
,
929 dm_put_device(ti
, ms
->mirror
[m
].dev
);
931 dm_io_client_destroy(ms
->io_client
);
932 dm_region_hash_destroy(ms
->rh
);
936 static int get_mirror(struct mirror_set
*ms
, struct dm_target
*ti
,
937 unsigned int mirror
, char **argv
)
939 unsigned long long offset
;
943 if (sscanf(argv
[1], "%llu%c", &offset
, &dummy
) != 1 ||
944 offset
!= (sector_t
)offset
) {
945 ti
->error
= "Invalid offset";
949 ret
= dm_get_device(ti
, argv
[0], dm_table_get_mode(ti
->table
),
950 &ms
->mirror
[mirror
].dev
);
952 ti
->error
= "Device lookup failure";
956 ms
->mirror
[mirror
].ms
= ms
;
957 atomic_set(&(ms
->mirror
[mirror
].error_count
), 0);
958 ms
->mirror
[mirror
].error_type
= 0;
959 ms
->mirror
[mirror
].offset
= offset
;
965 * Create dirty log: log_type #log_params <log_params>
967 static struct dm_dirty_log
*create_dirty_log(struct dm_target
*ti
,
968 unsigned argc
, char **argv
,
971 unsigned param_count
;
972 struct dm_dirty_log
*dl
;
976 ti
->error
= "Insufficient mirror log arguments";
980 if (sscanf(argv
[1], "%u%c", ¶m_count
, &dummy
) != 1) {
981 ti
->error
= "Invalid mirror log argument count";
985 *args_used
= 2 + param_count
;
987 if (argc
< *args_used
) {
988 ti
->error
= "Insufficient mirror log arguments";
992 dl
= dm_dirty_log_create(argv
[0], ti
, mirror_flush
, param_count
,
995 ti
->error
= "Error creating mirror dirty log";
1002 static int parse_features(struct mirror_set
*ms
, unsigned argc
, char **argv
,
1003 unsigned *args_used
)
1005 unsigned num_features
;
1006 struct dm_target
*ti
= ms
->ti
;
1015 if (sscanf(argv
[0], "%u%c", &num_features
, &dummy
) != 1) {
1016 ti
->error
= "Invalid number of features";
1024 if (num_features
> argc
) {
1025 ti
->error
= "Not enough arguments to support feature count";
1029 for (i
= 0; i
< num_features
; i
++) {
1030 if (!strcmp("handle_errors", argv
[0]))
1031 ms
->features
|= DM_RAID1_HANDLE_ERRORS
;
1032 else if (!strcmp("keep_log", argv
[0]))
1033 ms
->features
|= DM_RAID1_KEEP_LOG
;
1035 ti
->error
= "Unrecognised feature requested";
1043 if (!errors_handled(ms
) && keep_log(ms
)) {
1044 ti
->error
= "keep_log feature requires the handle_errors feature";
1052 * Construct a mirror mapping:
1054 * log_type #log_params <log_params>
1055 * #mirrors [mirror_path offset]{2,}
1056 * [#features <features>]
1058 * log_type is "core" or "disk"
1059 * #log_params is between 1 and 3
1061 * If present, supported features are "handle_errors" and "keep_log".
1063 static int mirror_ctr(struct dm_target
*ti
, unsigned int argc
, char **argv
)
1066 unsigned int nr_mirrors
, m
, args_used
;
1067 struct mirror_set
*ms
;
1068 struct dm_dirty_log
*dl
;
1071 dl
= create_dirty_log(ti
, argc
, argv
, &args_used
);
1078 if (!argc
|| sscanf(argv
[0], "%u%c", &nr_mirrors
, &dummy
) != 1 ||
1079 nr_mirrors
< 2 || nr_mirrors
> MAX_NR_MIRRORS
) {
1080 ti
->error
= "Invalid number of mirrors";
1081 dm_dirty_log_destroy(dl
);
1087 if (argc
< nr_mirrors
* 2) {
1088 ti
->error
= "Too few mirror arguments";
1089 dm_dirty_log_destroy(dl
);
1093 ms
= alloc_context(nr_mirrors
, dl
->type
->get_region_size(dl
), ti
, dl
);
1095 dm_dirty_log_destroy(dl
);
1099 /* Get the mirror parameter sets */
1100 for (m
= 0; m
< nr_mirrors
; m
++) {
1101 r
= get_mirror(ms
, ti
, m
, argv
);
1103 free_context(ms
, ti
, m
);
1112 r
= dm_set_target_max_io_len(ti
, dm_rh_get_region_size(ms
->rh
));
1114 goto err_free_context
;
1116 ti
->num_flush_bios
= 1;
1117 ti
->num_discard_bios
= 1;
1118 ti
->per_io_data_size
= sizeof(struct dm_raid1_bio_record
);
1120 ms
->kmirrord_wq
= alloc_workqueue("kmirrord", WQ_MEM_RECLAIM
, 0);
1121 if (!ms
->kmirrord_wq
) {
1122 DMERR("couldn't start kmirrord");
1124 goto err_free_context
;
1126 INIT_WORK(&ms
->kmirrord_work
, do_mirror
);
1127 timer_setup(&ms
->timer
, delayed_wake_fn
, 0);
1128 ms
->timer_pending
= 0;
1129 INIT_WORK(&ms
->trigger_event
, trigger_event
);
1131 r
= parse_features(ms
, argc
, argv
, &args_used
);
1133 goto err_destroy_wq
;
1139 * Any read-balancing addition depends on the
1140 * DM_RAID1_HANDLE_ERRORS flag being present.
1141 * This is because the decision to balance depends
1142 * on the sync state of a region. If the above
1143 * flag is not present, we ignore errors; and
1144 * the sync state may be inaccurate.
1148 ti
->error
= "Too many mirror arguments";
1150 goto err_destroy_wq
;
1153 ms
->kcopyd_client
= dm_kcopyd_client_create(&dm_kcopyd_throttle
);
1154 if (IS_ERR(ms
->kcopyd_client
)) {
1155 r
= PTR_ERR(ms
->kcopyd_client
);
1156 goto err_destroy_wq
;
1163 destroy_workqueue(ms
->kmirrord_wq
);
1165 free_context(ms
, ti
, ms
->nr_mirrors
);
1169 static void mirror_dtr(struct dm_target
*ti
)
1171 struct mirror_set
*ms
= (struct mirror_set
*) ti
->private;
1173 del_timer_sync(&ms
->timer
);
1174 flush_workqueue(ms
->kmirrord_wq
);
1175 flush_work(&ms
->trigger_event
);
1176 dm_kcopyd_client_destroy(ms
->kcopyd_client
);
1177 destroy_workqueue(ms
->kmirrord_wq
);
1178 free_context(ms
, ti
, ms
->nr_mirrors
);
1182 * Mirror mapping function
1184 static int mirror_map(struct dm_target
*ti
, struct bio
*bio
)
1186 int r
, rw
= bio_data_dir(bio
);
1188 struct mirror_set
*ms
= ti
->private;
1189 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
1190 struct dm_raid1_bio_record
*bio_record
=
1191 dm_per_bio_data(bio
, sizeof(struct dm_raid1_bio_record
));
1193 bio_record
->details
.bi_disk
= NULL
;
1196 /* Save region for mirror_end_io() handler */
1197 bio_record
->write_region
= dm_rh_bio_to_region(ms
->rh
, bio
);
1198 queue_bio(ms
, bio
, rw
);
1199 return DM_MAPIO_SUBMITTED
;
1202 r
= log
->type
->in_sync(log
, dm_rh_bio_to_region(ms
->rh
, bio
), 0);
1203 if (r
< 0 && r
!= -EWOULDBLOCK
)
1204 return DM_MAPIO_KILL
;
1207 * If region is not in-sync queue the bio.
1209 if (!r
|| (r
== -EWOULDBLOCK
)) {
1210 if (bio
->bi_opf
& REQ_RAHEAD
)
1211 return DM_MAPIO_KILL
;
1213 queue_bio(ms
, bio
, rw
);
1214 return DM_MAPIO_SUBMITTED
;
1218 * The region is in-sync and we can perform reads directly.
1219 * Store enough information so we can retry if it fails.
1221 m
= choose_mirror(ms
, bio
->bi_iter
.bi_sector
);
1223 return DM_MAPIO_KILL
;
1225 dm_bio_record(&bio_record
->details
, bio
);
1230 return DM_MAPIO_REMAPPED
;
1233 static int mirror_end_io(struct dm_target
*ti
, struct bio
*bio
,
1234 blk_status_t
*error
)
1236 int rw
= bio_data_dir(bio
);
1237 struct mirror_set
*ms
= (struct mirror_set
*) ti
->private;
1238 struct mirror
*m
= NULL
;
1239 struct dm_bio_details
*bd
= NULL
;
1240 struct dm_raid1_bio_record
*bio_record
=
1241 dm_per_bio_data(bio
, sizeof(struct dm_raid1_bio_record
));
1244 * We need to dec pending if this was a write.
1247 if (!(bio
->bi_opf
& REQ_PREFLUSH
) &&
1248 bio_op(bio
) != REQ_OP_DISCARD
)
1249 dm_rh_dec(ms
->rh
, bio_record
->write_region
);
1250 return DM_ENDIO_DONE
;
1253 if (*error
== BLK_STS_NOTSUPP
)
1256 if (bio
->bi_opf
& REQ_RAHEAD
)
1259 if (unlikely(*error
)) {
1260 if (!bio_record
->details
.bi_disk
) {
1262 * There wasn't enough memory to record necessary
1263 * information for a retry or there was no other
1266 DMERR_LIMIT("Mirror read failed.");
1267 return DM_ENDIO_DONE
;
1272 DMERR("Mirror read failed from %s. Trying alternative device.",
1275 fail_mirror(m
, DM_RAID1_READ_ERROR
);
1278 * A failed read is requeued for another attempt using an intact
1281 if (default_ok(m
) || mirror_available(ms
, bio
)) {
1282 bd
= &bio_record
->details
;
1284 dm_bio_restore(bd
, bio
);
1285 bio_record
->details
.bi_disk
= NULL
;
1288 queue_bio(ms
, bio
, rw
);
1289 return DM_ENDIO_INCOMPLETE
;
1291 DMERR("All replicated volumes dead, failing I/O");
1295 bio_record
->details
.bi_disk
= NULL
;
1297 return DM_ENDIO_DONE
;
1300 static void mirror_presuspend(struct dm_target
*ti
)
1302 struct mirror_set
*ms
= (struct mirror_set
*) ti
->private;
1303 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
1305 struct bio_list holds
;
1308 atomic_set(&ms
->suspend
, 1);
1311 * Process bios in the hold list to start recovery waiting
1312 * for bios in the hold list. After the process, no bio has
1313 * a chance to be added in the hold list because ms->suspend
1316 spin_lock_irq(&ms
->lock
);
1318 bio_list_init(&ms
->holds
);
1319 spin_unlock_irq(&ms
->lock
);
1321 while ((bio
= bio_list_pop(&holds
)))
1325 * We must finish up all the work that we've
1326 * generated (i.e. recovery work).
1328 dm_rh_stop_recovery(ms
->rh
);
1330 wait_event(_kmirrord_recovery_stopped
,
1331 !dm_rh_recovery_in_flight(ms
->rh
));
1333 if (log
->type
->presuspend
&& log
->type
->presuspend(log
))
1334 /* FIXME: need better error handling */
1335 DMWARN("log presuspend failed");
1338 * Now that recovery is complete/stopped and the
1339 * delayed bios are queued, we need to wait for
1340 * the worker thread to complete. This way,
1341 * we know that all of our I/O has been pushed.
1343 flush_workqueue(ms
->kmirrord_wq
);
1346 static void mirror_postsuspend(struct dm_target
*ti
)
1348 struct mirror_set
*ms
= ti
->private;
1349 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
1351 if (log
->type
->postsuspend
&& log
->type
->postsuspend(log
))
1352 /* FIXME: need better error handling */
1353 DMWARN("log postsuspend failed");
1356 static void mirror_resume(struct dm_target
*ti
)
1358 struct mirror_set
*ms
= ti
->private;
1359 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
1361 atomic_set(&ms
->suspend
, 0);
1362 if (log
->type
->resume
&& log
->type
->resume(log
))
1363 /* FIXME: need better error handling */
1364 DMWARN("log resume failed");
1365 dm_rh_start_recovery(ms
->rh
);
1369 * device_status_char
1370 * @m: mirror device/leg we want the status of
1372 * We return one character representing the most severe error
1373 * we have encountered.
1374 * A => Alive - No failures
1375 * D => Dead - A write failure occurred leaving mirror out-of-sync
1376 * S => Sync - A sychronization failure occurred, mirror out-of-sync
1377 * R => Read - A read failure occurred, mirror data unaffected
1381 static char device_status_char(struct mirror
*m
)
1383 if (!atomic_read(&(m
->error_count
)))
1386 return (test_bit(DM_RAID1_FLUSH_ERROR
, &(m
->error_type
))) ? 'F' :
1387 (test_bit(DM_RAID1_WRITE_ERROR
, &(m
->error_type
))) ? 'D' :
1388 (test_bit(DM_RAID1_SYNC_ERROR
, &(m
->error_type
))) ? 'S' :
1389 (test_bit(DM_RAID1_READ_ERROR
, &(m
->error_type
))) ? 'R' : 'U';
1393 static void mirror_status(struct dm_target
*ti
, status_type_t type
,
1394 unsigned status_flags
, char *result
, unsigned maxlen
)
1396 unsigned int m
, sz
= 0;
1397 int num_feature_args
= 0;
1398 struct mirror_set
*ms
= (struct mirror_set
*) ti
->private;
1399 struct dm_dirty_log
*log
= dm_rh_dirty_log(ms
->rh
);
1400 char buffer
[MAX_NR_MIRRORS
+ 1];
1403 case STATUSTYPE_INFO
:
1404 DMEMIT("%d ", ms
->nr_mirrors
);
1405 for (m
= 0; m
< ms
->nr_mirrors
; m
++) {
1406 DMEMIT("%s ", ms
->mirror
[m
].dev
->name
);
1407 buffer
[m
] = device_status_char(&(ms
->mirror
[m
]));
1411 DMEMIT("%llu/%llu 1 %s ",
1412 (unsigned long long)log
->type
->get_sync_count(log
),
1413 (unsigned long long)ms
->nr_regions
, buffer
);
1415 sz
+= log
->type
->status(log
, type
, result
+sz
, maxlen
-sz
);
1419 case STATUSTYPE_TABLE
:
1420 sz
= log
->type
->status(log
, type
, result
, maxlen
);
1422 DMEMIT("%d", ms
->nr_mirrors
);
1423 for (m
= 0; m
< ms
->nr_mirrors
; m
++)
1424 DMEMIT(" %s %llu", ms
->mirror
[m
].dev
->name
,
1425 (unsigned long long)ms
->mirror
[m
].offset
);
1427 num_feature_args
+= !!errors_handled(ms
);
1428 num_feature_args
+= !!keep_log(ms
);
1429 if (num_feature_args
) {
1430 DMEMIT(" %d", num_feature_args
);
1431 if (errors_handled(ms
))
1432 DMEMIT(" handle_errors");
1434 DMEMIT(" keep_log");
1441 static int mirror_iterate_devices(struct dm_target
*ti
,
1442 iterate_devices_callout_fn fn
, void *data
)
1444 struct mirror_set
*ms
= ti
->private;
1448 for (i
= 0; !ret
&& i
< ms
->nr_mirrors
; i
++)
1449 ret
= fn(ti
, ms
->mirror
[i
].dev
,
1450 ms
->mirror
[i
].offset
, ti
->len
, data
);
1455 static struct target_type mirror_target
= {
1457 .version
= {1, 14, 0},
1458 .module
= THIS_MODULE
,
1462 .end_io
= mirror_end_io
,
1463 .presuspend
= mirror_presuspend
,
1464 .postsuspend
= mirror_postsuspend
,
1465 .resume
= mirror_resume
,
1466 .status
= mirror_status
,
1467 .iterate_devices
= mirror_iterate_devices
,
1470 static int __init
dm_mirror_init(void)
1474 r
= dm_register_target(&mirror_target
);
1476 DMERR("Failed to register mirror target");
1486 static void __exit
dm_mirror_exit(void)
1488 dm_unregister_target(&mirror_target
);
1492 module_init(dm_mirror_init
);
1493 module_exit(dm_mirror_exit
);
1495 MODULE_DESCRIPTION(DM_NAME
" mirror target");
1496 MODULE_AUTHOR("Joe Thornber");
1497 MODULE_LICENSE("GPL");