drivers/media/common/cypress_firmware.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*  cypress_firmware.c is part of the DVB USB library.
   3  *
   4  * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
   5  * see dvb-usb-init.c for copyright information.
   6  *
   7  * This file contains functions for downloading the firmware to Cypress FX 1
   8  * and 2 based devices.
   9  *
  10  */
  11
  12 #include <linux/module.h>
  13 #include <linux/slab.h>
  14 #include <linux/usb.h>
  15 #include <linux/firmware.h>
  16 #include "cypress_firmware.h"
  17
  18 struct usb_cypress_controller {
  19         u8 id;
  20         const char *name;       /* name of the usb controller */
  21         u16 cs_reg;             /* needs to be restarted,
  22                                  * when the firmware has been downloaded */
  23 };
  24
  25 static const struct usb_cypress_controller cypress[] = {
  26         { .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cs_reg = 0x7f92 },
  27         { .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cs_reg = 0x7f92 },
  28         { .id = CYPRESS_FX2,    .name = "Cypress FX2",    .cs_reg = 0xe600 },
  29 };
  30
  31 /*
  32  * load a firmware packet to the device
  33  */
  34 static int usb_cypress_writemem(struct usb_device *udev, u16 addr, u8 *data,
  35                 u8 len)
  36 {
  37         return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
  38                         0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000);
  39 }
  40
  41 static int cypress_get_hexline(const struct firmware *fw,
  42                                 struct hexline *hx, int *pos)
  43 {
  44         u8 *b = (u8 *) &fw->data[*pos];
  45         int data_offs = 4;
  46
  47         if (*pos >= fw->size)
  48                 return 0;
  49
  50         memset(hx, 0, sizeof(struct hexline));
  51         hx->len = b[0];
  52
  53         if ((*pos + hx->len + 4) >= fw->size)
  54                 return -EINVAL;
  55
  56         hx->addr = b[1] | (b[2] << 8);
  57         hx->type = b[3];
  58
  59         if (hx->type == 0x04) {
  60                 /* b[4] and b[5] are the Extended linear address record data
  61                  * field */
  62                 hx->addr |= (b[4] << 24) | (b[5] << 16);
  63         }
  64
  65         memcpy(hx->data, &b[data_offs], hx->len);
  66         hx->chk = b[hx->len + data_offs];
  67         *pos += hx->len + 5;
  68
  69         return *pos;
  70 }
  71
  72 int cypress_load_firmware(struct usb_device *udev,
  73                 const struct firmware *fw, int type)
  74 {
  75         struct hexline *hx;
  76         int ret, pos = 0;
  77
  78         hx = kmalloc(sizeof(*hx), GFP_KERNEL);
  79         if (!hx)
  80                 return -ENOMEM;
  81
  82         /* stop the CPU */
  83         hx->data[0] = 1;
  84         ret = usb_cypress_writemem(udev, cypress[type].cs_reg, hx->data, 1);
  85         if (ret != 1) {
  86                 dev_err(&udev->dev, "%s: CPU stop failed=%d\n",
  87                                 KBUILD_MODNAME, ret);
  88                 ret = -EIO;
  89                 goto err_kfree;
  90         }
  91
  92         /* write firmware to memory */
  93         for (;;) {
  94                 ret = cypress_get_hexline(fw, hx, &pos);
  95                 if (ret < 0)
  96                         goto err_kfree;
  97                 else if (ret == 0)
  98                         break;
  99
 100                 ret = usb_cypress_writemem(udev, hx->addr, hx->data, hx->len);
 101                 if (ret < 0) {
 102                         goto err_kfree;
 103                 } else if (ret != hx->len) {
 104                         dev_err(&udev->dev,
 105                                         "%s: error while transferring firmware (transferred size=%d, block size=%d)\n",
 106                                         KBUILD_MODNAME, ret, hx->len);
 107                         ret = -EIO;
 108                         goto err_kfree;
 109                 }
 110         }
 111
 112         /* start the CPU */
 113         hx->data[0] = 0;
 114         ret = usb_cypress_writemem(udev, cypress[type].cs_reg, hx->data, 1);
 115         if (ret != 1) {
 116                 dev_err(&udev->dev, "%s: CPU start failed=%d\n",
 117                                 KBUILD_MODNAME, ret);
 118                 ret = -EIO;
 119                 goto err_kfree;
 120         }
 121
 122         ret = 0;
 123 err_kfree:
 124         kfree(hx);
 125         return ret;
 126 }
 127 EXPORT_SYMBOL(cypress_load_firmware);
 128
 129 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
 130 MODULE_DESCRIPTION("Cypress firmware download");
 131 MODULE_LICENSE("GPL");