1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Auvitek AU8522 QAM/8VSB demodulator driver and video decoder
5 * Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org>
6 * Copyright (C) 2005-2008 Auvitek International, Ltd.
11 * Enough is implemented here for CVBS and S-Video inputs, but the actual
12 * analog demodulator code isn't implemented (not needed for xc5000 since it
13 * has its own demodulator and outputs CVBS)
17 #include <linux/kernel.h>
18 #include <linux/slab.h>
19 #include <linux/videodev2.h>
20 #include <linux/i2c.h>
21 #include <linux/delay.h>
22 #include <media/v4l2-common.h>
23 #include <media/v4l2-device.h>
25 #include "au8522_priv.h"
27 MODULE_AUTHOR("Devin Heitmueller");
28 MODULE_LICENSE("GPL");
30 static int au8522_analog_debug
;
33 module_param_named(analog_debug
, au8522_analog_debug
, int, 0644);
35 MODULE_PARM_DESC(analog_debug
,
36 "Analog debugging messages [0=Off (default) 1=On]");
38 struct au8522_register_config
{
44 /* Video Decoder Filter Coefficients
45 The values are as follows from left to right
46 0="ATV RF" 1="ATV RF13" 2="CVBS" 3="S-Video" 4="PAL" 5=CVBS13" 6="SVideo13"
48 static const struct au8522_register_config filter_coef
[] = {
49 {AU8522_FILTER_COEF_R410
, {0x25, 0x00, 0x25, 0x25, 0x00, 0x00, 0x00} },
50 {AU8522_FILTER_COEF_R411
, {0x20, 0x00, 0x20, 0x20, 0x00, 0x00, 0x00} },
51 {AU8522_FILTER_COEF_R412
, {0x03, 0x00, 0x03, 0x03, 0x00, 0x00, 0x00} },
52 {AU8522_FILTER_COEF_R413
, {0xe6, 0x00, 0xe6, 0xe6, 0x00, 0x00, 0x00} },
53 {AU8522_FILTER_COEF_R414
, {0x40, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00} },
54 {AU8522_FILTER_COEF_R415
, {0x1b, 0x00, 0x1b, 0x1b, 0x00, 0x00, 0x00} },
55 {AU8522_FILTER_COEF_R416
, {0xc0, 0x00, 0xc0, 0x04, 0x00, 0x00, 0x00} },
56 {AU8522_FILTER_COEF_R417
, {0x04, 0x00, 0x04, 0x04, 0x00, 0x00, 0x00} },
57 {AU8522_FILTER_COEF_R418
, {0x8c, 0x00, 0x8c, 0x8c, 0x00, 0x00, 0x00} },
58 {AU8522_FILTER_COEF_R419
, {0xa0, 0x40, 0xa0, 0xa0, 0x40, 0x40, 0x40} },
59 {AU8522_FILTER_COEF_R41A
, {0x21, 0x09, 0x21, 0x21, 0x09, 0x09, 0x09} },
60 {AU8522_FILTER_COEF_R41B
, {0x6c, 0x38, 0x6c, 0x6c, 0x38, 0x38, 0x38} },
61 {AU8522_FILTER_COEF_R41C
, {0x03, 0xff, 0x03, 0x03, 0xff, 0xff, 0xff} },
62 {AU8522_FILTER_COEF_R41D
, {0xbf, 0xc7, 0xbf, 0xbf, 0xc7, 0xc7, 0xc7} },
63 {AU8522_FILTER_COEF_R41E
, {0xa0, 0xdf, 0xa0, 0xa0, 0xdf, 0xdf, 0xdf} },
64 {AU8522_FILTER_COEF_R41F
, {0x10, 0x06, 0x10, 0x10, 0x06, 0x06, 0x06} },
65 {AU8522_FILTER_COEF_R420
, {0xae, 0x30, 0xae, 0xae, 0x30, 0x30, 0x30} },
66 {AU8522_FILTER_COEF_R421
, {0xc4, 0x01, 0xc4, 0xc4, 0x01, 0x01, 0x01} },
67 {AU8522_FILTER_COEF_R422
, {0x54, 0xdd, 0x54, 0x54, 0xdd, 0xdd, 0xdd} },
68 {AU8522_FILTER_COEF_R423
, {0xd0, 0xaf, 0xd0, 0xd0, 0xaf, 0xaf, 0xaf} },
69 {AU8522_FILTER_COEF_R424
, {0x1c, 0xf7, 0x1c, 0x1c, 0xf7, 0xf7, 0xf7} },
70 {AU8522_FILTER_COEF_R425
, {0x76, 0xdb, 0x76, 0x76, 0xdb, 0xdb, 0xdb} },
71 {AU8522_FILTER_COEF_R426
, {0x61, 0xc0, 0x61, 0x61, 0xc0, 0xc0, 0xc0} },
72 {AU8522_FILTER_COEF_R427
, {0xd1, 0x2f, 0xd1, 0xd1, 0x2f, 0x2f, 0x2f} },
73 {AU8522_FILTER_COEF_R428
, {0x84, 0xd8, 0x84, 0x84, 0xd8, 0xd8, 0xd8} },
74 {AU8522_FILTER_COEF_R429
, {0x06, 0xfb, 0x06, 0x06, 0xfb, 0xfb, 0xfb} },
75 {AU8522_FILTER_COEF_R42A
, {0x21, 0xd5, 0x21, 0x21, 0xd5, 0xd5, 0xd5} },
76 {AU8522_FILTER_COEF_R42B
, {0x0a, 0x3e, 0x0a, 0x0a, 0x3e, 0x3e, 0x3e} },
77 {AU8522_FILTER_COEF_R42C
, {0xe6, 0x15, 0xe6, 0xe6, 0x15, 0x15, 0x15} },
78 {AU8522_FILTER_COEF_R42D
, {0x01, 0x34, 0x01, 0x01, 0x34, 0x34, 0x34} },
81 #define NUM_FILTER_COEF (sizeof(filter_coef)\
82 / sizeof(struct au8522_register_config))
85 /* Registers 0x060b through 0x0652 are the LP Filter coefficients
86 The values are as follows from left to right
87 0="SIF" 1="ATVRF/ATVRF13"
88 Note: the "ATVRF/ATVRF13" mode has never been tested
90 static const struct au8522_register_config lpfilter_coef
[] = {
91 {0x060b, {0x21, 0x0b} },
92 {0x060c, {0xad, 0xad} },
93 {0x060d, {0x70, 0xf0} },
94 {0x060e, {0xea, 0xe9} },
95 {0x060f, {0xdd, 0xdd} },
96 {0x0610, {0x08, 0x64} },
97 {0x0611, {0x60, 0x60} },
98 {0x0612, {0xf8, 0xb2} },
99 {0x0613, {0x01, 0x02} },
100 {0x0614, {0xe4, 0xb4} },
101 {0x0615, {0x19, 0x02} },
102 {0x0616, {0xae, 0x2e} },
103 {0x0617, {0xee, 0xc5} },
104 {0x0618, {0x56, 0x56} },
105 {0x0619, {0x30, 0x58} },
106 {0x061a, {0xf9, 0xf8} },
107 {0x061b, {0x24, 0x64} },
108 {0x061c, {0x07, 0x07} },
109 {0x061d, {0x30, 0x30} },
110 {0x061e, {0xa9, 0xed} },
111 {0x061f, {0x09, 0x0b} },
112 {0x0620, {0x42, 0xc2} },
113 {0x0621, {0x1d, 0x2a} },
114 {0x0622, {0xd6, 0x56} },
115 {0x0623, {0x95, 0x8b} },
116 {0x0624, {0x2b, 0x2b} },
117 {0x0625, {0x30, 0x24} },
118 {0x0626, {0x3e, 0x3e} },
119 {0x0627, {0x62, 0xe2} },
120 {0x0628, {0xe9, 0xf5} },
121 {0x0629, {0x99, 0x19} },
122 {0x062a, {0xd4, 0x11} },
123 {0x062b, {0x03, 0x04} },
124 {0x062c, {0xb5, 0x85} },
125 {0x062d, {0x1e, 0x20} },
126 {0x062e, {0x2a, 0xea} },
127 {0x062f, {0xd7, 0xd2} },
128 {0x0630, {0x15, 0x15} },
129 {0x0631, {0xa3, 0xa9} },
130 {0x0632, {0x1f, 0x1f} },
131 {0x0633, {0xf9, 0xd1} },
132 {0x0634, {0xc0, 0xc3} },
133 {0x0635, {0x4d, 0x8d} },
134 {0x0636, {0x21, 0x31} },
135 {0x0637, {0x83, 0x83} },
136 {0x0638, {0x08, 0x8c} },
137 {0x0639, {0x19, 0x19} },
138 {0x063a, {0x45, 0xa5} },
139 {0x063b, {0xef, 0xec} },
140 {0x063c, {0x8a, 0x8a} },
141 {0x063d, {0xf4, 0xf6} },
142 {0x063e, {0x8f, 0x8f} },
143 {0x063f, {0x44, 0x0c} },
144 {0x0640, {0xef, 0xf0} },
145 {0x0641, {0x66, 0x66} },
146 {0x0642, {0xcc, 0xd2} },
147 {0x0643, {0x41, 0x41} },
148 {0x0644, {0x63, 0x93} },
149 {0x0645, {0x8e, 0x8e} },
150 {0x0646, {0xa2, 0x42} },
151 {0x0647, {0x7b, 0x7b} },
152 {0x0648, {0x04, 0x04} },
153 {0x0649, {0x00, 0x00} },
154 {0x064a, {0x40, 0x40} },
155 {0x064b, {0x8c, 0x98} },
156 {0x064c, {0x00, 0x00} },
157 {0x064d, {0x63, 0xc3} },
158 {0x064e, {0x04, 0x04} },
159 {0x064f, {0x20, 0x20} },
160 {0x0650, {0x00, 0x00} },
161 {0x0651, {0x40, 0x40} },
162 {0x0652, {0x01, 0x01} },
164 #define NUM_LPFILTER_COEF (sizeof(lpfilter_coef)\
165 / sizeof(struct au8522_register_config))
167 static inline struct au8522_state
*to_state(struct v4l2_subdev
*sd
)
169 return container_of(sd
, struct au8522_state
, sd
);
172 static void setup_decoder_defaults(struct au8522_state
*state
, bool is_svideo
)
175 int filter_coef_type
;
177 /* Provide reasonable defaults for picture tuning values */
178 au8522_writereg(state
, AU8522_TVDEC_SHARPNESSREG009H
, 0x07);
179 au8522_writereg(state
, AU8522_TVDEC_BRIGHTNESS_REG00AH
, 0xed);
180 au8522_writereg(state
, AU8522_TVDEC_CONTRAST_REG00BH
, 0x79);
181 au8522_writereg(state
, AU8522_TVDEC_SATURATION_CB_REG00CH
, 0x80);
182 au8522_writereg(state
, AU8522_TVDEC_SATURATION_CR_REG00DH
, 0x80);
183 au8522_writereg(state
, AU8522_TVDEC_HUE_H_REG00EH
, 0x00);
184 au8522_writereg(state
, AU8522_TVDEC_HUE_L_REG00FH
, 0x00);
186 /* Other decoder registers */
187 au8522_writereg(state
, AU8522_TVDEC_INT_MASK_REG010H
, 0x00);
190 au8522_writereg(state
, AU8522_VIDEO_MODE_REG011H
, 0x04);
192 au8522_writereg(state
, AU8522_VIDEO_MODE_REG011H
, 0x00);
194 au8522_writereg(state
, AU8522_TVDEC_PGA_REG012H
,
195 AU8522_TVDEC_PGA_REG012H_CVBS
);
196 au8522_writereg(state
, AU8522_TVDEC_COMB_MODE_REG015H
,
197 AU8522_TVDEC_COMB_MODE_REG015H_CVBS
);
198 au8522_writereg(state
, AU8522_TVDED_DBG_MODE_REG060H
,
199 AU8522_TVDED_DBG_MODE_REG060H_CVBS
);
201 if (state
->std
== V4L2_STD_PAL_M
) {
202 au8522_writereg(state
, AU8522_TVDEC_FORMAT_CTRL1_REG061H
,
203 AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525
|
204 AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492
|
205 AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_AUTO
);
206 au8522_writereg(state
, AU8522_TVDEC_FORMAT_CTRL2_REG062H
,
207 AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_PAL_M
);
210 au8522_writereg(state
, AU8522_TVDEC_FORMAT_CTRL1_REG061H
,
211 AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525
|
212 AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492
|
213 AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_MN
);
214 au8522_writereg(state
, AU8522_TVDEC_FORMAT_CTRL2_REG062H
,
215 AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_NTSC
);
217 au8522_writereg(state
, AU8522_TVDEC_VCR_DET_LLIM_REG063H
,
218 AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS
);
219 au8522_writereg(state
, AU8522_TVDEC_VCR_DET_HLIM_REG064H
,
220 AU8522_TVDEC_VCR_DET_HLIM_REG064H_CVBS
);
221 au8522_writereg(state
, AU8522_TVDEC_COMB_VDIF_THR1_REG065H
,
222 AU8522_TVDEC_COMB_VDIF_THR1_REG065H_CVBS
);
223 au8522_writereg(state
, AU8522_TVDEC_COMB_VDIF_THR2_REG066H
,
224 AU8522_TVDEC_COMB_VDIF_THR2_REG066H_CVBS
);
225 au8522_writereg(state
, AU8522_TVDEC_COMB_VDIF_THR3_REG067H
,
226 AU8522_TVDEC_COMB_VDIF_THR3_REG067H_CVBS
);
227 au8522_writereg(state
, AU8522_TVDEC_COMB_NOTCH_THR_REG068H
,
228 AU8522_TVDEC_COMB_NOTCH_THR_REG068H_CVBS
);
229 au8522_writereg(state
, AU8522_TVDEC_COMB_HDIF_THR1_REG069H
,
230 AU8522_TVDEC_COMB_HDIF_THR1_REG069H_CVBS
);
231 au8522_writereg(state
, AU8522_TVDEC_COMB_HDIF_THR2_REG06AH
,
232 AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS
);
233 au8522_writereg(state
, AU8522_TVDEC_COMB_HDIF_THR3_REG06BH
,
234 AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS
);
236 au8522_writereg(state
, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH
,
237 AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO
);
238 au8522_writereg(state
, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH
,
239 AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO
);
241 au8522_writereg(state
, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH
,
242 AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS
);
243 au8522_writereg(state
, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH
,
244 AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS
);
246 au8522_writereg(state
, AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH
,
247 AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS
);
248 au8522_writereg(state
, AU8522_TVDEC_UV_SEP_THR_REG06FH
,
249 AU8522_TVDEC_UV_SEP_THR_REG06FH_CVBS
);
250 au8522_writereg(state
, AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H
,
251 AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H_CVBS
);
252 au8522_writereg(state
, AU8522_REG071H
, AU8522_REG071H_CVBS
);
253 au8522_writereg(state
, AU8522_REG072H
, AU8522_REG072H_CVBS
);
254 au8522_writereg(state
, AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H
,
255 AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H_CVBS
);
256 au8522_writereg(state
, AU8522_REG074H
, AU8522_REG074H_CVBS
);
257 au8522_writereg(state
, AU8522_REG075H
, AU8522_REG075H_CVBS
);
258 au8522_writereg(state
, AU8522_TVDEC_DCAGC_CTRL_REG077H
,
259 AU8522_TVDEC_DCAGC_CTRL_REG077H_CVBS
);
260 au8522_writereg(state
, AU8522_TVDEC_PIC_START_ADJ_REG078H
,
261 AU8522_TVDEC_PIC_START_ADJ_REG078H_CVBS
);
262 au8522_writereg(state
, AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H
,
263 AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H_CVBS
);
264 au8522_writereg(state
, AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH
,
265 AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH_CVBS
);
266 au8522_writereg(state
, AU8522_TVDEC_INTRP_CTRL_REG07BH
,
267 AU8522_TVDEC_INTRP_CTRL_REG07BH_CVBS
);
268 au8522_writereg(state
, AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H
,
269 AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H_CVBS
);
270 au8522_writereg(state
, AU8522_TOREGAAGC_REG0E5H
,
271 AU8522_TOREGAAGC_REG0E5H_CVBS
);
272 au8522_writereg(state
, AU8522_REG016H
, AU8522_REG016H_CVBS
);
275 * Despite what the table says, for the HVR-950q we still need
276 * to be in CVBS mode for the S-Video input (reason unknown).
278 /* filter_coef_type = 3; */
279 filter_coef_type
= 5;
281 /* Load the Video Decoder Filter Coefficients */
282 for (i
= 0; i
< NUM_FILTER_COEF
; i
++) {
283 au8522_writereg(state
, filter_coef
[i
].reg_name
,
284 filter_coef
[i
].reg_val
[filter_coef_type
]);
287 /* It's not clear what these registers are for, but they are always
288 set to the same value regardless of what mode we're in */
289 au8522_writereg(state
, AU8522_REG42EH
, 0x87);
290 au8522_writereg(state
, AU8522_REG42FH
, 0xa2);
291 au8522_writereg(state
, AU8522_REG430H
, 0xbf);
292 au8522_writereg(state
, AU8522_REG431H
, 0xcb);
293 au8522_writereg(state
, AU8522_REG432H
, 0xa1);
294 au8522_writereg(state
, AU8522_REG433H
, 0x41);
295 au8522_writereg(state
, AU8522_REG434H
, 0x88);
296 au8522_writereg(state
, AU8522_REG435H
, 0xc2);
297 au8522_writereg(state
, AU8522_REG436H
, 0x3c);
300 static void au8522_setup_cvbs_mode(struct au8522_state
*state
, u8 input_mode
)
302 /* here we're going to try the pre-programmed route */
303 au8522_writereg(state
, AU8522_MODULE_CLOCK_CONTROL_REG0A3H
,
304 AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS
);
306 /* PGA in automatic mode */
307 au8522_writereg(state
, AU8522_PGA_CONTROL_REG082H
, 0x00);
309 /* Enable clamping control */
310 au8522_writereg(state
, AU8522_CLAMPING_CONTROL_REG083H
, 0x00);
312 au8522_writereg(state
, AU8522_INPUT_CONTROL_REG081H
, input_mode
);
314 setup_decoder_defaults(state
, false);
316 au8522_writereg(state
, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H
,
317 AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS
);
320 static void au8522_setup_cvbs_tuner_mode(struct au8522_state
*state
,
323 /* here we're going to try the pre-programmed route */
324 au8522_writereg(state
, AU8522_MODULE_CLOCK_CONTROL_REG0A3H
,
325 AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS
);
327 /* It's not clear why we have to have the PGA in automatic mode while
328 enabling clamp control, but it's what Windows does */
329 au8522_writereg(state
, AU8522_PGA_CONTROL_REG082H
, 0x00);
331 /* Enable clamping control */
332 au8522_writereg(state
, AU8522_CLAMPING_CONTROL_REG083H
, 0x0e);
334 /* Disable automatic PGA (since the CVBS is coming from the tuner) */
335 au8522_writereg(state
, AU8522_PGA_CONTROL_REG082H
, 0x10);
337 /* Set input mode to CVBS on channel 4 with SIF audio input enabled */
338 au8522_writereg(state
, AU8522_INPUT_CONTROL_REG081H
, input_mode
);
340 setup_decoder_defaults(state
, false);
342 au8522_writereg(state
, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H
,
343 AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS
);
346 static void au8522_setup_svideo_mode(struct au8522_state
*state
,
349 au8522_writereg(state
, AU8522_MODULE_CLOCK_CONTROL_REG0A3H
,
350 AU8522_MODULE_CLOCK_CONTROL_REG0A3H_SVIDEO
);
352 /* Set input to Y on Channe1, C on Channel 3 */
353 au8522_writereg(state
, AU8522_INPUT_CONTROL_REG081H
, input_mode
);
355 /* PGA in automatic mode */
356 au8522_writereg(state
, AU8522_PGA_CONTROL_REG082H
, 0x00);
358 /* Enable clamping control */
359 au8522_writereg(state
, AU8522_CLAMPING_CONTROL_REG083H
, 0x00);
361 setup_decoder_defaults(state
, true);
363 au8522_writereg(state
, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H
,
364 AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS
);
367 /* ----------------------------------------------------------------------- */
369 static void disable_audio_input(struct au8522_state
*state
)
371 au8522_writereg(state
, AU8522_AUDIO_VOLUME_L_REG0F2H
, 0x00);
372 au8522_writereg(state
, AU8522_AUDIO_VOLUME_R_REG0F3H
, 0x00);
373 au8522_writereg(state
, AU8522_AUDIO_VOLUME_REG0F4H
, 0x00);
375 au8522_writereg(state
, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H
, 0x04);
376 au8522_writereg(state
, AU8522_I2S_CTRL_2_REG112H
, 0x02);
378 au8522_writereg(state
, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H
,
379 AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_SVIDEO
);
382 /* 0=disable, 1=SIF */
383 static void set_audio_input(struct au8522_state
*state
)
385 int aud_input
= state
->aud_input
;
388 /* Note that this function needs to be used in conjunction with setting
389 the input routing via register 0x81 */
391 if (aud_input
== AU8522_AUDIO_NONE
) {
392 disable_audio_input(state
);
396 if (aud_input
!= AU8522_AUDIO_SIF
) {
397 /* The caller asked for a mode we don't currently support */
398 printk(KERN_ERR
"Unsupported audio mode requested! mode=%d\n",
403 /* Load the Audio Decoder Filter Coefficients */
404 for (i
= 0; i
< NUM_LPFILTER_COEF
; i
++) {
405 au8522_writereg(state
, lpfilter_coef
[i
].reg_name
,
406 lpfilter_coef
[i
].reg_val
[0]);
410 au8522_writereg(state
, AU8522_AUDIO_VOLUME_L_REG0F2H
, 0x7F);
411 au8522_writereg(state
, AU8522_AUDIO_VOLUME_R_REG0F3H
, 0x7F);
412 au8522_writereg(state
, AU8522_AUDIO_VOLUME_REG0F4H
, 0xff);
414 /* Not sure what this does */
415 au8522_writereg(state
, AU8522_REG0F9H
, AU8522_REG0F9H_AUDIO
);
417 /* Setup the audio mode to stereo DBX */
418 au8522_writereg(state
, AU8522_AUDIO_MODE_REG0F1H
, 0x82);
421 /* Start the audio processing module */
422 au8522_writereg(state
, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H
, 0x9d);
424 /* Set the audio frequency to 48 KHz */
425 au8522_writereg(state
, AU8522_AUDIOFREQ_REG606H
, 0x03);
427 /* Set the I2S parameters (WS, LSB, mode, sample rate */
428 au8522_writereg(state
, AU8522_I2S_CTRL_2_REG112H
, 0xc2);
430 /* Enable the I2S output */
431 au8522_writereg(state
, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H
, 0x09);
434 /* ----------------------------------------------------------------------- */
436 static int au8522_s_ctrl(struct v4l2_ctrl
*ctrl
)
438 struct au8522_state
*state
=
439 container_of(ctrl
->handler
, struct au8522_state
, hdl
);
442 case V4L2_CID_BRIGHTNESS
:
443 au8522_writereg(state
, AU8522_TVDEC_BRIGHTNESS_REG00AH
,
446 case V4L2_CID_CONTRAST
:
447 au8522_writereg(state
, AU8522_TVDEC_CONTRAST_REG00BH
,
450 case V4L2_CID_SATURATION
:
451 au8522_writereg(state
, AU8522_TVDEC_SATURATION_CB_REG00CH
,
453 au8522_writereg(state
, AU8522_TVDEC_SATURATION_CR_REG00DH
,
457 au8522_writereg(state
, AU8522_TVDEC_HUE_H_REG00EH
,
459 au8522_writereg(state
, AU8522_TVDEC_HUE_L_REG00FH
,
469 /* ----------------------------------------------------------------------- */
471 #ifdef CONFIG_VIDEO_ADV_DEBUG
472 static int au8522_g_register(struct v4l2_subdev
*sd
,
473 struct v4l2_dbg_register
*reg
)
475 struct au8522_state
*state
= to_state(sd
);
477 reg
->val
= au8522_readreg(state
, reg
->reg
& 0xffff);
481 static int au8522_s_register(struct v4l2_subdev
*sd
,
482 const struct v4l2_dbg_register
*reg
)
484 struct au8522_state
*state
= to_state(sd
);
486 au8522_writereg(state
, reg
->reg
, reg
->val
& 0xff);
491 static void au8522_video_set(struct au8522_state
*state
)
495 au8522_writereg(state
, 0xa4, 1 << 5);
497 switch (state
->vid_input
) {
498 case AU8522_COMPOSITE_CH1
:
499 input_mode
= AU8522_INPUT_CONTROL_REG081H_CVBS_CH1
;
500 au8522_setup_cvbs_mode(state
, input_mode
);
502 case AU8522_COMPOSITE_CH2
:
503 input_mode
= AU8522_INPUT_CONTROL_REG081H_CVBS_CH2
;
504 au8522_setup_cvbs_mode(state
, input_mode
);
506 case AU8522_COMPOSITE_CH3
:
507 input_mode
= AU8522_INPUT_CONTROL_REG081H_CVBS_CH3
;
508 au8522_setup_cvbs_mode(state
, input_mode
);
510 case AU8522_COMPOSITE_CH4
:
511 input_mode
= AU8522_INPUT_CONTROL_REG081H_CVBS_CH4
;
512 au8522_setup_cvbs_mode(state
, input_mode
);
514 case AU8522_SVIDEO_CH13
:
515 input_mode
= AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13
;
516 au8522_setup_svideo_mode(state
, input_mode
);
518 case AU8522_SVIDEO_CH24
:
519 input_mode
= AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24
;
520 au8522_setup_svideo_mode(state
, input_mode
);
523 case AU8522_COMPOSITE_CH4_SIF
:
524 input_mode
= AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF
;
525 au8522_setup_cvbs_tuner_mode(state
, input_mode
);
530 static int au8522_s_stream(struct v4l2_subdev
*sd
, int enable
)
532 struct au8522_state
*state
= to_state(sd
);
536 * Clear out any state associated with the digital side of the
537 * chip, so that when it gets powered back up it won't think
538 * that it is already tuned
540 state
->current_frequency
= 0;
542 au8522_writereg(state
, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H
,
546 au8522_video_set(state
);
547 set_audio_input(state
);
549 state
->operational_mode
= AU8522_ANALOG_MODE
;
551 /* This does not completely power down the device
552 (it only reduces it from around 140ma to 80ma) */
553 au8522_writereg(state
, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H
,
555 state
->operational_mode
= AU8522_SUSPEND_MODE
;
560 static int au8522_s_video_routing(struct v4l2_subdev
*sd
,
561 u32 input
, u32 output
, u32 config
)
563 struct au8522_state
*state
= to_state(sd
);
566 case AU8522_COMPOSITE_CH1
:
567 case AU8522_SVIDEO_CH13
:
568 case AU8522_COMPOSITE_CH4_SIF
:
569 state
->vid_input
= input
;
572 printk(KERN_ERR
"au8522 mode not currently supported\n");
576 if (state
->operational_mode
== AU8522_ANALOG_MODE
)
577 au8522_video_set(state
);
582 static int au8522_s_std(struct v4l2_subdev
*sd
, v4l2_std_id std
)
584 struct au8522_state
*state
= to_state(sd
);
586 if ((std
& (V4L2_STD_PAL_M
| V4L2_STD_NTSC_M
)) == 0)
591 if (state
->operational_mode
== AU8522_ANALOG_MODE
)
592 au8522_video_set(state
);
597 static int au8522_s_audio_routing(struct v4l2_subdev
*sd
,
598 u32 input
, u32 output
, u32 config
)
600 struct au8522_state
*state
= to_state(sd
);
602 state
->aud_input
= input
;
604 if (state
->operational_mode
== AU8522_ANALOG_MODE
)
605 set_audio_input(state
);
610 static int au8522_g_tuner(struct v4l2_subdev
*sd
, struct v4l2_tuner
*vt
)
613 struct au8522_state
*state
= to_state(sd
);
617 /* Interrogate the decoder to see if we are getting a real signal */
618 lock_status
= au8522_readreg(state
, 0x00);
619 pll_status
= au8522_readreg(state
, 0x7e);
620 if ((lock_status
== 0xa2) && (pll_status
& 0x10))
626 V4L2_TUNER_CAP_STEREO
| V4L2_TUNER_CAP_LANG1
|
627 V4L2_TUNER_CAP_LANG2
| V4L2_TUNER_CAP_SAP
;
629 val
= V4L2_TUNER_SUB_MONO
;
630 vt
->rxsubchans
= val
;
631 vt
->audmode
= V4L2_TUNER_MODE_STEREO
;
635 /* ----------------------------------------------------------------------- */
637 static const struct v4l2_subdev_core_ops au8522_core_ops
= {
638 .log_status
= v4l2_ctrl_subdev_log_status
,
639 #ifdef CONFIG_VIDEO_ADV_DEBUG
640 .g_register
= au8522_g_register
,
641 .s_register
= au8522_s_register
,
645 static const struct v4l2_subdev_tuner_ops au8522_tuner_ops
= {
646 .g_tuner
= au8522_g_tuner
,
649 static const struct v4l2_subdev_audio_ops au8522_audio_ops
= {
650 .s_routing
= au8522_s_audio_routing
,
653 static const struct v4l2_subdev_video_ops au8522_video_ops
= {
654 .s_routing
= au8522_s_video_routing
,
655 .s_stream
= au8522_s_stream
,
656 .s_std
= au8522_s_std
,
659 static const struct v4l2_subdev_ops au8522_ops
= {
660 .core
= &au8522_core_ops
,
661 .tuner
= &au8522_tuner_ops
,
662 .audio
= &au8522_audio_ops
,
663 .video
= &au8522_video_ops
,
666 static const struct v4l2_ctrl_ops au8522_ctrl_ops
= {
667 .s_ctrl
= au8522_s_ctrl
,
670 /* ----------------------------------------------------------------------- */
672 static int au8522_probe(struct i2c_client
*client
,
673 const struct i2c_device_id
*did
)
675 struct au8522_state
*state
;
676 struct v4l2_ctrl_handler
*hdl
;
677 struct v4l2_subdev
*sd
;
679 #ifdef CONFIG_MEDIA_CONTROLLER
683 /* Check if the adapter supports the needed features */
684 if (!i2c_check_functionality(client
->adapter
,
685 I2C_FUNC_SMBUS_BYTE_DATA
)) {
689 /* allocate memory for the internal state */
690 instance
= au8522_get_state(&state
, client
->adapter
, client
->addr
);
693 printk(KERN_ERR
"au8522_decoder allocation failed\n");
696 /* new demod instance */
697 printk(KERN_INFO
"au8522_decoder creating new instance...\n");
700 /* existing demod instance */
701 printk(KERN_INFO
"au8522_decoder attach existing instance.\n");
705 state
->config
.demod_address
= 0x8e >> 1;
706 state
->i2c
= client
->adapter
;
709 v4l2_i2c_subdev_init(sd
, client
, &au8522_ops
);
710 #if defined(CONFIG_MEDIA_CONTROLLER)
712 state
->pads
[AU8522_PAD_IF_INPUT
].flags
= MEDIA_PAD_FL_SINK
;
713 state
->pads
[AU8522_PAD_IF_INPUT
].sig_type
= PAD_SIGNAL_ANALOG
;
714 state
->pads
[AU8522_PAD_VID_OUT
].flags
= MEDIA_PAD_FL_SOURCE
;
715 state
->pads
[AU8522_PAD_VID_OUT
].sig_type
= PAD_SIGNAL_DV
;
716 state
->pads
[AU8522_PAD_AUDIO_OUT
].flags
= MEDIA_PAD_FL_SOURCE
;
717 state
->pads
[AU8522_PAD_AUDIO_OUT
].sig_type
= PAD_SIGNAL_AUDIO
;
718 sd
->entity
.function
= MEDIA_ENT_F_ATV_DECODER
;
720 ret
= media_entity_pads_init(&sd
->entity
, ARRAY_SIZE(state
->pads
),
723 v4l_info(client
, "failed to initialize media entity!\n");
729 v4l2_ctrl_handler_init(hdl
, 4);
730 v4l2_ctrl_new_std(hdl
, &au8522_ctrl_ops
,
731 V4L2_CID_BRIGHTNESS
, 0, 255, 1, 109);
732 v4l2_ctrl_new_std(hdl
, &au8522_ctrl_ops
,
733 V4L2_CID_CONTRAST
, 0, 255, 1,
734 AU8522_TVDEC_CONTRAST_REG00BH_CVBS
);
735 v4l2_ctrl_new_std(hdl
, &au8522_ctrl_ops
,
736 V4L2_CID_SATURATION
, 0, 255, 1, 128);
737 v4l2_ctrl_new_std(hdl
, &au8522_ctrl_ops
,
738 V4L2_CID_HUE
, -32768, 32767, 1, 0);
739 sd
->ctrl_handler
= hdl
;
741 int err
= hdl
->error
;
743 v4l2_ctrl_handler_free(hdl
);
744 au8522_release_state(state
);
749 state
->std
= V4L2_STD_NTSC_M
;
750 state
->vid_input
= AU8522_COMPOSITE_CH1
;
751 state
->aud_input
= AU8522_AUDIO_NONE
;
755 /* Jam open the i2c gate to the tuner */
756 au8522_writereg(state
, 0x106, 1);
761 static int au8522_remove(struct i2c_client
*client
)
763 struct v4l2_subdev
*sd
= i2c_get_clientdata(client
);
764 v4l2_device_unregister_subdev(sd
);
765 v4l2_ctrl_handler_free(sd
->ctrl_handler
);
766 au8522_release_state(to_state(sd
));
770 static const struct i2c_device_id au8522_id
[] = {
775 MODULE_DEVICE_TABLE(i2c
, au8522_id
);
777 static struct i2c_driver au8522_driver
= {
781 .probe
= au8522_probe
,
782 .remove
= au8522_remove
,
783 .id_table
= au8522_id
,
786 module_i2c_driver(au8522_driver
);