treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / media / dvb-frontends / mt352_priv.h
blob3ec4552efa8f71a5212df5de0e798548ede8bed5
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3 * Driver for Zarlink DVB-T MT352 demodulator
5 * Written by Holger Waechtler <holger@qanu.de>
6 * and Daniel Mack <daniel@qanu.de>
8 * AVerMedia AVerTV DVB-T 771 support by
9 * Wolfram Joost <dbox2@frokaschwei.de>
11 * Support for Samsung TDTC9251DH01C(M) tuner
12 * Copyright (C) 2004 Antonio Mancuso <antonio.mancuso@digitaltelevision.it>
13 * Amauri Celani <acelani@essegi.net>
15 * DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by
16 * Christopher Pascoe <c.pascoe@itee.uq.edu.au>
19 #ifndef _MT352_PRIV_
20 #define _MT352_PRIV_
22 #define ID_MT352 0x13
24 #define msb(x) (((x) >> 8) & 0xff)
25 #define lsb(x) ((x) & 0xff)
27 enum mt352_reg_addr {
28 STATUS_0 = 0x00,
29 STATUS_1 = 0x01,
30 STATUS_2 = 0x02,
31 STATUS_3 = 0x03,
32 STATUS_4 = 0x04,
33 INTERRUPT_0 = 0x05,
34 INTERRUPT_1 = 0x06,
35 INTERRUPT_2 = 0x07,
36 INTERRUPT_3 = 0x08,
37 SNR = 0x09,
38 VIT_ERR_CNT_2 = 0x0A,
39 VIT_ERR_CNT_1 = 0x0B,
40 VIT_ERR_CNT_0 = 0x0C,
41 RS_ERR_CNT_2 = 0x0D,
42 RS_ERR_CNT_1 = 0x0E,
43 RS_ERR_CNT_0 = 0x0F,
44 RS_UBC_1 = 0x10,
45 RS_UBC_0 = 0x11,
46 AGC_GAIN_3 = 0x12,
47 AGC_GAIN_2 = 0x13,
48 AGC_GAIN_1 = 0x14,
49 AGC_GAIN_0 = 0x15,
50 FREQ_OFFSET_2 = 0x17,
51 FREQ_OFFSET_1 = 0x18,
52 FREQ_OFFSET_0 = 0x19,
53 TIMING_OFFSET_1 = 0x1A,
54 TIMING_OFFSET_0 = 0x1B,
55 CHAN_FREQ_1 = 0x1C,
56 CHAN_FREQ_0 = 0x1D,
57 TPS_RECEIVED_1 = 0x1E,
58 TPS_RECEIVED_0 = 0x1F,
59 TPS_CURRENT_1 = 0x20,
60 TPS_CURRENT_0 = 0x21,
61 TPS_CELL_ID_1 = 0x22,
62 TPS_CELL_ID_0 = 0x23,
63 TPS_MISC_DATA_2 = 0x24,
64 TPS_MISC_DATA_1 = 0x25,
65 TPS_MISC_DATA_0 = 0x26,
66 RESET = 0x50,
67 TPS_GIVEN_1 = 0x51,
68 TPS_GIVEN_0 = 0x52,
69 ACQ_CTL = 0x53,
70 TRL_NOMINAL_RATE_1 = 0x54,
71 TRL_NOMINAL_RATE_0 = 0x55,
72 INPUT_FREQ_1 = 0x56,
73 INPUT_FREQ_0 = 0x57,
74 TUNER_ADDR = 0x58,
75 CHAN_START_1 = 0x59,
76 CHAN_START_0 = 0x5A,
77 CONT_1 = 0x5B,
78 CONT_0 = 0x5C,
79 TUNER_GO = 0x5D,
80 STATUS_EN_0 = 0x5F,
81 STATUS_EN_1 = 0x60,
82 INTERRUPT_EN_0 = 0x61,
83 INTERRUPT_EN_1 = 0x62,
84 INTERRUPT_EN_2 = 0x63,
85 INTERRUPT_EN_3 = 0x64,
86 AGC_TARGET = 0x67,
87 AGC_CTL = 0x68,
88 CAPT_RANGE = 0x75,
89 SNR_SELECT_1 = 0x79,
90 SNR_SELECT_0 = 0x7A,
91 RS_ERR_PER_1 = 0x7C,
92 RS_ERR_PER_0 = 0x7D,
93 CHIP_ID = 0x7F,
94 CHAN_STOP_1 = 0x80,
95 CHAN_STOP_0 = 0x81,
96 CHAN_STEP_1 = 0x82,
97 CHAN_STEP_0 = 0x83,
98 FEC_LOCK_TIME = 0x85,
99 OFDM_LOCK_TIME = 0x86,
100 ACQ_DELAY = 0x87,
101 SCAN_CTL = 0x88,
102 CLOCK_CTL = 0x89,
103 CONFIG = 0x8A,
104 MCLK_RATIO = 0x8B,
105 GPP_CTL = 0x8C,
106 ADC_CTL_1 = 0x8E,
107 ADC_CTL_0 = 0x8F
110 /* here we assume 1/6MHz == 166.66kHz stepsize */
111 #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
113 #endif /* _MT352_PRIV_ */