treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / media / dvb-frontends / tda10071.c
blob1953b00b3e48796e5c3d51408fcda585d5c34f34
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * NXP TDA10071 + Conexant CX24118A DVB-S/S2 demodulator + tuner driver
5 * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
6 */
8 #include "tda10071_priv.h"
10 static const struct dvb_frontend_ops tda10071_ops;
13 * XXX: regmap_update_bits() does not fit our needs as it does not support
14 * partially volatile registers. Also it performs register read even mask is as
15 * wide as register value.
17 /* write single register with mask */
18 static int tda10071_wr_reg_mask(struct tda10071_dev *dev,
19 u8 reg, u8 val, u8 mask)
21 int ret;
22 u8 tmp;
24 /* no need for read if whole reg is written */
25 if (mask != 0xff) {
26 ret = regmap_bulk_read(dev->regmap, reg, &tmp, 1);
27 if (ret)
28 return ret;
30 val &= mask;
31 tmp &= ~mask;
32 val |= tmp;
35 return regmap_bulk_write(dev->regmap, reg, &val, 1);
38 /* execute firmware command */
39 static int tda10071_cmd_execute(struct tda10071_dev *dev,
40 struct tda10071_cmd *cmd)
42 struct i2c_client *client = dev->client;
43 int ret, i;
44 unsigned int uitmp;
46 if (!dev->warm) {
47 ret = -EFAULT;
48 goto error;
51 mutex_lock(&dev->cmd_execute_mutex);
53 /* write cmd and args for firmware */
54 ret = regmap_bulk_write(dev->regmap, 0x00, cmd->args, cmd->len);
55 if (ret)
56 goto error_mutex_unlock;
58 /* start cmd execution */
59 ret = regmap_write(dev->regmap, 0x1f, 1);
60 if (ret)
61 goto error_mutex_unlock;
63 /* wait cmd execution terminate */
64 for (i = 1000, uitmp = 1; i && uitmp; i--) {
65 ret = regmap_read(dev->regmap, 0x1f, &uitmp);
66 if (ret)
67 goto error_mutex_unlock;
69 usleep_range(200, 5000);
72 mutex_unlock(&dev->cmd_execute_mutex);
73 dev_dbg(&client->dev, "loop=%d\n", i);
75 if (i == 0) {
76 ret = -ETIMEDOUT;
77 goto error;
80 return ret;
81 error_mutex_unlock:
82 mutex_unlock(&dev->cmd_execute_mutex);
83 error:
84 dev_dbg(&client->dev, "failed=%d\n", ret);
85 return ret;
88 static int tda10071_set_tone(struct dvb_frontend *fe,
89 enum fe_sec_tone_mode fe_sec_tone_mode)
91 struct tda10071_dev *dev = fe->demodulator_priv;
92 struct i2c_client *client = dev->client;
93 struct tda10071_cmd cmd;
94 int ret;
95 u8 tone;
97 if (!dev->warm) {
98 ret = -EFAULT;
99 goto error;
102 dev_dbg(&client->dev, "tone_mode=%d\n", fe_sec_tone_mode);
104 switch (fe_sec_tone_mode) {
105 case SEC_TONE_ON:
106 tone = 1;
107 break;
108 case SEC_TONE_OFF:
109 tone = 0;
110 break;
111 default:
112 dev_dbg(&client->dev, "invalid fe_sec_tone_mode\n");
113 ret = -EINVAL;
114 goto error;
117 cmd.args[0] = CMD_LNB_PCB_CONFIG;
118 cmd.args[1] = 0;
119 cmd.args[2] = 0x00;
120 cmd.args[3] = 0x00;
121 cmd.args[4] = tone;
122 cmd.len = 5;
123 ret = tda10071_cmd_execute(dev, &cmd);
124 if (ret)
125 goto error;
127 return ret;
128 error:
129 dev_dbg(&client->dev, "failed=%d\n", ret);
130 return ret;
133 static int tda10071_set_voltage(struct dvb_frontend *fe,
134 enum fe_sec_voltage fe_sec_voltage)
136 struct tda10071_dev *dev = fe->demodulator_priv;
137 struct i2c_client *client = dev->client;
138 struct tda10071_cmd cmd;
139 int ret;
140 u8 voltage;
142 if (!dev->warm) {
143 ret = -EFAULT;
144 goto error;
147 dev_dbg(&client->dev, "voltage=%d\n", fe_sec_voltage);
149 switch (fe_sec_voltage) {
150 case SEC_VOLTAGE_13:
151 voltage = 0;
152 break;
153 case SEC_VOLTAGE_18:
154 voltage = 1;
155 break;
156 case SEC_VOLTAGE_OFF:
157 voltage = 0;
158 break;
159 default:
160 dev_dbg(&client->dev, "invalid fe_sec_voltage\n");
161 ret = -EINVAL;
162 goto error;
165 cmd.args[0] = CMD_LNB_SET_DC_LEVEL;
166 cmd.args[1] = 0;
167 cmd.args[2] = voltage;
168 cmd.len = 3;
169 ret = tda10071_cmd_execute(dev, &cmd);
170 if (ret)
171 goto error;
173 return ret;
174 error:
175 dev_dbg(&client->dev, "failed=%d\n", ret);
176 return ret;
179 static int tda10071_diseqc_send_master_cmd(struct dvb_frontend *fe,
180 struct dvb_diseqc_master_cmd *diseqc_cmd)
182 struct tda10071_dev *dev = fe->demodulator_priv;
183 struct i2c_client *client = dev->client;
184 struct tda10071_cmd cmd;
185 int ret, i;
186 unsigned int uitmp;
188 if (!dev->warm) {
189 ret = -EFAULT;
190 goto error;
193 dev_dbg(&client->dev, "msg_len=%d\n", diseqc_cmd->msg_len);
195 if (diseqc_cmd->msg_len < 3 || diseqc_cmd->msg_len > 6) {
196 ret = -EINVAL;
197 goto error;
200 /* wait LNB TX */
201 for (i = 500, uitmp = 0; i && !uitmp; i--) {
202 ret = regmap_read(dev->regmap, 0x47, &uitmp);
203 if (ret)
204 goto error;
205 uitmp = (uitmp >> 0) & 1;
206 usleep_range(10000, 20000);
209 dev_dbg(&client->dev, "loop=%d\n", i);
211 if (i == 0) {
212 ret = -ETIMEDOUT;
213 goto error;
216 ret = regmap_update_bits(dev->regmap, 0x47, 0x01, 0x00);
217 if (ret)
218 goto error;
220 cmd.args[0] = CMD_LNB_SEND_DISEQC;
221 cmd.args[1] = 0;
222 cmd.args[2] = 0;
223 cmd.args[3] = 0;
224 cmd.args[4] = 2;
225 cmd.args[5] = 0;
226 cmd.args[6] = diseqc_cmd->msg_len;
227 memcpy(&cmd.args[7], diseqc_cmd->msg, diseqc_cmd->msg_len);
228 cmd.len = 7 + diseqc_cmd->msg_len;
229 ret = tda10071_cmd_execute(dev, &cmd);
230 if (ret)
231 goto error;
233 return ret;
234 error:
235 dev_dbg(&client->dev, "failed=%d\n", ret);
236 return ret;
239 static int tda10071_diseqc_recv_slave_reply(struct dvb_frontend *fe,
240 struct dvb_diseqc_slave_reply *reply)
242 struct tda10071_dev *dev = fe->demodulator_priv;
243 struct i2c_client *client = dev->client;
244 struct tda10071_cmd cmd;
245 int ret, i;
246 unsigned int uitmp;
248 if (!dev->warm) {
249 ret = -EFAULT;
250 goto error;
253 dev_dbg(&client->dev, "\n");
255 /* wait LNB RX */
256 for (i = 500, uitmp = 0; i && !uitmp; i--) {
257 ret = regmap_read(dev->regmap, 0x47, &uitmp);
258 if (ret)
259 goto error;
260 uitmp = (uitmp >> 1) & 1;
261 usleep_range(10000, 20000);
264 dev_dbg(&client->dev, "loop=%d\n", i);
266 if (i == 0) {
267 ret = -ETIMEDOUT;
268 goto error;
271 /* reply len */
272 ret = regmap_read(dev->regmap, 0x46, &uitmp);
273 if (ret)
274 goto error;
276 reply->msg_len = uitmp & 0x1f; /* [4:0] */
277 if (reply->msg_len > sizeof(reply->msg))
278 reply->msg_len = sizeof(reply->msg); /* truncate API max */
280 /* read reply */
281 cmd.args[0] = CMD_LNB_UPDATE_REPLY;
282 cmd.args[1] = 0;
283 cmd.len = 2;
284 ret = tda10071_cmd_execute(dev, &cmd);
285 if (ret)
286 goto error;
288 ret = regmap_bulk_read(dev->regmap, cmd.len, reply->msg,
289 reply->msg_len);
290 if (ret)
291 goto error;
293 return ret;
294 error:
295 dev_dbg(&client->dev, "failed=%d\n", ret);
296 return ret;
299 static int tda10071_diseqc_send_burst(struct dvb_frontend *fe,
300 enum fe_sec_mini_cmd fe_sec_mini_cmd)
302 struct tda10071_dev *dev = fe->demodulator_priv;
303 struct i2c_client *client = dev->client;
304 struct tda10071_cmd cmd;
305 int ret, i;
306 unsigned int uitmp;
307 u8 burst;
309 if (!dev->warm) {
310 ret = -EFAULT;
311 goto error;
314 dev_dbg(&client->dev, "fe_sec_mini_cmd=%d\n", fe_sec_mini_cmd);
316 switch (fe_sec_mini_cmd) {
317 case SEC_MINI_A:
318 burst = 0;
319 break;
320 case SEC_MINI_B:
321 burst = 1;
322 break;
323 default:
324 dev_dbg(&client->dev, "invalid fe_sec_mini_cmd\n");
325 ret = -EINVAL;
326 goto error;
329 /* wait LNB TX */
330 for (i = 500, uitmp = 0; i && !uitmp; i--) {
331 ret = regmap_read(dev->regmap, 0x47, &uitmp);
332 if (ret)
333 goto error;
334 uitmp = (uitmp >> 0) & 1;
335 usleep_range(10000, 20000);
338 dev_dbg(&client->dev, "loop=%d\n", i);
340 if (i == 0) {
341 ret = -ETIMEDOUT;
342 goto error;
345 ret = regmap_update_bits(dev->regmap, 0x47, 0x01, 0x00);
346 if (ret)
347 goto error;
349 cmd.args[0] = CMD_LNB_SEND_TONEBURST;
350 cmd.args[1] = 0;
351 cmd.args[2] = burst;
352 cmd.len = 3;
353 ret = tda10071_cmd_execute(dev, &cmd);
354 if (ret)
355 goto error;
357 return ret;
358 error:
359 dev_dbg(&client->dev, "failed=%d\n", ret);
360 return ret;
363 static int tda10071_read_status(struct dvb_frontend *fe, enum fe_status *status)
365 struct tda10071_dev *dev = fe->demodulator_priv;
366 struct i2c_client *client = dev->client;
367 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
368 struct tda10071_cmd cmd;
369 int ret;
370 unsigned int uitmp;
371 u8 buf[8];
373 *status = 0;
375 if (!dev->warm) {
376 ret = 0;
377 goto error;
380 ret = regmap_read(dev->regmap, 0x39, &uitmp);
381 if (ret)
382 goto error;
384 /* 0x39[0] tuner PLL */
385 if (uitmp & 0x02) /* demod PLL */
386 *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
387 if (uitmp & 0x04) /* viterbi or LDPC*/
388 *status |= FE_HAS_VITERBI;
389 if (uitmp & 0x08) /* RS or BCH */
390 *status |= FE_HAS_SYNC | FE_HAS_LOCK;
392 dev->fe_status = *status;
394 /* signal strength */
395 if (dev->fe_status & FE_HAS_SIGNAL) {
396 cmd.args[0] = CMD_GET_AGCACC;
397 cmd.args[1] = 0;
398 cmd.len = 2;
399 ret = tda10071_cmd_execute(dev, &cmd);
400 if (ret)
401 goto error;
403 /* input power estimate dBm */
404 ret = regmap_read(dev->regmap, 0x50, &uitmp);
405 if (ret)
406 goto error;
408 c->strength.stat[0].scale = FE_SCALE_DECIBEL;
409 c->strength.stat[0].svalue = (int) (uitmp - 256) * 1000;
410 } else {
411 c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
414 /* CNR */
415 if (dev->fe_status & FE_HAS_VITERBI) {
416 /* Es/No */
417 ret = regmap_bulk_read(dev->regmap, 0x3a, buf, 2);
418 if (ret)
419 goto error;
421 c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
422 c->cnr.stat[0].svalue = (buf[0] << 8 | buf[1] << 0) * 100;
423 } else {
424 c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
427 /* UCB/PER/BER */
428 if (dev->fe_status & FE_HAS_LOCK) {
429 /* TODO: report total bits/packets */
430 u8 delivery_system, reg, len;
432 switch (dev->delivery_system) {
433 case SYS_DVBS:
434 reg = 0x4c;
435 len = 8;
436 delivery_system = 1;
437 break;
438 case SYS_DVBS2:
439 reg = 0x4d;
440 len = 4;
441 delivery_system = 0;
442 break;
443 default:
444 ret = -EINVAL;
445 goto error;
448 ret = regmap_read(dev->regmap, reg, &uitmp);
449 if (ret)
450 goto error;
452 if (dev->meas_count == uitmp) {
453 dev_dbg(&client->dev, "meas not ready=%02x\n", uitmp);
454 ret = 0;
455 goto error;
456 } else {
457 dev->meas_count = uitmp;
460 cmd.args[0] = CMD_BER_UPDATE_COUNTERS;
461 cmd.args[1] = 0;
462 cmd.args[2] = delivery_system;
463 cmd.len = 3;
464 ret = tda10071_cmd_execute(dev, &cmd);
465 if (ret)
466 goto error;
468 ret = regmap_bulk_read(dev->regmap, cmd.len, buf, len);
469 if (ret)
470 goto error;
472 if (dev->delivery_system == SYS_DVBS) {
473 dev->dvbv3_ber = buf[0] << 24 | buf[1] << 16 |
474 buf[2] << 8 | buf[3] << 0;
475 dev->post_bit_error += buf[0] << 24 | buf[1] << 16 |
476 buf[2] << 8 | buf[3] << 0;
477 c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
478 c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
479 dev->block_error += buf[4] << 8 | buf[5] << 0;
480 c->block_error.stat[0].scale = FE_SCALE_COUNTER;
481 c->block_error.stat[0].uvalue = dev->block_error;
482 } else {
483 dev->dvbv3_ber = buf[0] << 8 | buf[1] << 0;
484 dev->post_bit_error += buf[0] << 8 | buf[1] << 0;
485 c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
486 c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
487 c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
489 } else {
490 c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
491 c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
494 return ret;
495 error:
496 dev_dbg(&client->dev, "failed=%d\n", ret);
497 return ret;
500 static int tda10071_read_snr(struct dvb_frontend *fe, u16 *snr)
502 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
504 if (c->cnr.stat[0].scale == FE_SCALE_DECIBEL)
505 *snr = div_s64(c->cnr.stat[0].svalue, 100);
506 else
507 *snr = 0;
508 return 0;
511 static int tda10071_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
513 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
514 unsigned int uitmp;
516 if (c->strength.stat[0].scale == FE_SCALE_DECIBEL) {
517 uitmp = div_s64(c->strength.stat[0].svalue, 1000) + 256;
518 uitmp = clamp(uitmp, 181U, 236U); /* -75dBm - -20dBm */
519 /* scale value to 0x0000-0xffff */
520 *strength = (uitmp-181) * 0xffff / (236-181);
521 } else {
522 *strength = 0;
524 return 0;
527 static int tda10071_read_ber(struct dvb_frontend *fe, u32 *ber)
529 struct tda10071_dev *dev = fe->demodulator_priv;
531 *ber = dev->dvbv3_ber;
532 return 0;
535 static int tda10071_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
537 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
539 if (c->block_error.stat[0].scale == FE_SCALE_COUNTER)
540 *ucblocks = c->block_error.stat[0].uvalue;
541 else
542 *ucblocks = 0;
543 return 0;
546 static int tda10071_set_frontend(struct dvb_frontend *fe)
548 struct tda10071_dev *dev = fe->demodulator_priv;
549 struct i2c_client *client = dev->client;
550 struct tda10071_cmd cmd;
551 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
552 int ret, i;
553 u8 mode, rolloff, pilot, inversion, div;
554 enum fe_modulation modulation;
556 dev_dbg(&client->dev,
557 "delivery_system=%d modulation=%d frequency=%u symbol_rate=%d inversion=%d pilot=%d rolloff=%d\n",
558 c->delivery_system, c->modulation, c->frequency, c->symbol_rate,
559 c->inversion, c->pilot, c->rolloff);
561 dev->delivery_system = SYS_UNDEFINED;
563 if (!dev->warm) {
564 ret = -EFAULT;
565 goto error;
568 switch (c->inversion) {
569 case INVERSION_OFF:
570 inversion = 1;
571 break;
572 case INVERSION_ON:
573 inversion = 0;
574 break;
575 case INVERSION_AUTO:
576 /* 2 = auto; try first on then off
577 * 3 = auto; try first off then on */
578 inversion = 3;
579 break;
580 default:
581 dev_dbg(&client->dev, "invalid inversion\n");
582 ret = -EINVAL;
583 goto error;
586 switch (c->delivery_system) {
587 case SYS_DVBS:
588 modulation = QPSK;
589 rolloff = 0;
590 pilot = 2;
591 break;
592 case SYS_DVBS2:
593 modulation = c->modulation;
595 switch (c->rolloff) {
596 case ROLLOFF_20:
597 rolloff = 2;
598 break;
599 case ROLLOFF_25:
600 rolloff = 1;
601 break;
602 case ROLLOFF_35:
603 rolloff = 0;
604 break;
605 case ROLLOFF_AUTO:
606 default:
607 dev_dbg(&client->dev, "invalid rolloff\n");
608 ret = -EINVAL;
609 goto error;
612 switch (c->pilot) {
613 case PILOT_OFF:
614 pilot = 0;
615 break;
616 case PILOT_ON:
617 pilot = 1;
618 break;
619 case PILOT_AUTO:
620 pilot = 2;
621 break;
622 default:
623 dev_dbg(&client->dev, "invalid pilot\n");
624 ret = -EINVAL;
625 goto error;
627 break;
628 default:
629 dev_dbg(&client->dev, "invalid delivery_system\n");
630 ret = -EINVAL;
631 goto error;
634 for (i = 0, mode = 0xff; i < ARRAY_SIZE(TDA10071_MODCOD); i++) {
635 if (c->delivery_system == TDA10071_MODCOD[i].delivery_system &&
636 modulation == TDA10071_MODCOD[i].modulation &&
637 c->fec_inner == TDA10071_MODCOD[i].fec) {
638 mode = TDA10071_MODCOD[i].val;
639 dev_dbg(&client->dev, "mode found=%02x\n", mode);
640 break;
644 if (mode == 0xff) {
645 dev_dbg(&client->dev, "invalid parameter combination\n");
646 ret = -EINVAL;
647 goto error;
650 if (c->symbol_rate <= 5000000)
651 div = 14;
652 else
653 div = 4;
655 ret = regmap_write(dev->regmap, 0x81, div);
656 if (ret)
657 goto error;
659 ret = regmap_write(dev->regmap, 0xe3, div);
660 if (ret)
661 goto error;
663 cmd.args[0] = CMD_CHANGE_CHANNEL;
664 cmd.args[1] = 0;
665 cmd.args[2] = mode;
666 cmd.args[3] = (c->frequency >> 16) & 0xff;
667 cmd.args[4] = (c->frequency >> 8) & 0xff;
668 cmd.args[5] = (c->frequency >> 0) & 0xff;
669 cmd.args[6] = ((c->symbol_rate / 1000) >> 8) & 0xff;
670 cmd.args[7] = ((c->symbol_rate / 1000) >> 0) & 0xff;
671 cmd.args[8] = ((tda10071_ops.info.frequency_tolerance_hz / 1000) >> 8) & 0xff;
672 cmd.args[9] = ((tda10071_ops.info.frequency_tolerance_hz / 1000) >> 0) & 0xff;
673 cmd.args[10] = rolloff;
674 cmd.args[11] = inversion;
675 cmd.args[12] = pilot;
676 cmd.args[13] = 0x00;
677 cmd.args[14] = 0x00;
678 cmd.len = 15;
679 ret = tda10071_cmd_execute(dev, &cmd);
680 if (ret)
681 goto error;
683 dev->delivery_system = c->delivery_system;
685 return ret;
686 error:
687 dev_dbg(&client->dev, "failed=%d\n", ret);
688 return ret;
691 static int tda10071_get_frontend(struct dvb_frontend *fe,
692 struct dtv_frontend_properties *c)
694 struct tda10071_dev *dev = fe->demodulator_priv;
695 struct i2c_client *client = dev->client;
696 int ret, i;
697 u8 buf[5], tmp;
699 if (!dev->warm || !(dev->fe_status & FE_HAS_LOCK)) {
700 ret = 0;
701 goto error;
704 ret = regmap_bulk_read(dev->regmap, 0x30, buf, 5);
705 if (ret)
706 goto error;
708 tmp = buf[0] & 0x3f;
709 for (i = 0; i < ARRAY_SIZE(TDA10071_MODCOD); i++) {
710 if (tmp == TDA10071_MODCOD[i].val) {
711 c->modulation = TDA10071_MODCOD[i].modulation;
712 c->fec_inner = TDA10071_MODCOD[i].fec;
713 c->delivery_system = TDA10071_MODCOD[i].delivery_system;
717 switch ((buf[1] >> 0) & 0x01) {
718 case 0:
719 c->inversion = INVERSION_ON;
720 break;
721 case 1:
722 c->inversion = INVERSION_OFF;
723 break;
726 switch ((buf[1] >> 7) & 0x01) {
727 case 0:
728 c->pilot = PILOT_OFF;
729 break;
730 case 1:
731 c->pilot = PILOT_ON;
732 break;
735 c->frequency = (buf[2] << 16) | (buf[3] << 8) | (buf[4] << 0);
737 ret = regmap_bulk_read(dev->regmap, 0x52, buf, 3);
738 if (ret)
739 goto error;
741 c->symbol_rate = ((buf[0] << 16) | (buf[1] << 8) | (buf[2] << 0)) * 1000;
743 return ret;
744 error:
745 dev_dbg(&client->dev, "failed=%d\n", ret);
746 return ret;
749 static int tda10071_init(struct dvb_frontend *fe)
751 struct tda10071_dev *dev = fe->demodulator_priv;
752 struct i2c_client *client = dev->client;
753 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
754 struct tda10071_cmd cmd;
755 int ret, i, len, remaining, fw_size;
756 unsigned int uitmp;
757 const struct firmware *fw;
758 u8 *fw_file = TDA10071_FIRMWARE;
759 u8 tmp, buf[4];
760 struct tda10071_reg_val_mask tab[] = {
761 { 0xcd, 0x00, 0x07 },
762 { 0x80, 0x00, 0x02 },
763 { 0xcd, 0x00, 0xc0 },
764 { 0xce, 0x00, 0x1b },
765 { 0x9d, 0x00, 0x01 },
766 { 0x9d, 0x00, 0x02 },
767 { 0x9e, 0x00, 0x01 },
768 { 0x87, 0x00, 0x80 },
769 { 0xce, 0x00, 0x08 },
770 { 0xce, 0x00, 0x10 },
772 struct tda10071_reg_val_mask tab2[] = {
773 { 0xf1, 0x70, 0xff },
774 { 0x88, dev->pll_multiplier, 0x3f },
775 { 0x89, 0x00, 0x10 },
776 { 0x89, 0x10, 0x10 },
777 { 0xc0, 0x01, 0x01 },
778 { 0xc0, 0x00, 0x01 },
779 { 0xe0, 0xff, 0xff },
780 { 0xe0, 0x00, 0xff },
781 { 0x96, 0x1e, 0x7e },
782 { 0x8b, 0x08, 0x08 },
783 { 0x8b, 0x00, 0x08 },
784 { 0x8f, 0x1a, 0x7e },
785 { 0x8c, 0x68, 0xff },
786 { 0x8d, 0x08, 0xff },
787 { 0x8e, 0x4c, 0xff },
788 { 0x8f, 0x01, 0x01 },
789 { 0x8b, 0x04, 0x04 },
790 { 0x8b, 0x00, 0x04 },
791 { 0x87, 0x05, 0x07 },
792 { 0x80, 0x00, 0x20 },
793 { 0xc8, 0x01, 0xff },
794 { 0xb4, 0x47, 0xff },
795 { 0xb5, 0x9c, 0xff },
796 { 0xb6, 0x7d, 0xff },
797 { 0xba, 0x00, 0x03 },
798 { 0xb7, 0x47, 0xff },
799 { 0xb8, 0x9c, 0xff },
800 { 0xb9, 0x7d, 0xff },
801 { 0xba, 0x00, 0x0c },
802 { 0xc8, 0x00, 0xff },
803 { 0xcd, 0x00, 0x04 },
804 { 0xcd, 0x00, 0x20 },
805 { 0xe8, 0x02, 0xff },
806 { 0xcf, 0x20, 0xff },
807 { 0x9b, 0xd7, 0xff },
808 { 0x9a, 0x01, 0x03 },
809 { 0xa8, 0x05, 0x0f },
810 { 0xa8, 0x65, 0xf0 },
811 { 0xa6, 0xa0, 0xf0 },
812 { 0x9d, 0x50, 0xfc },
813 { 0x9e, 0x20, 0xe0 },
814 { 0xa3, 0x1c, 0x7c },
815 { 0xd5, 0x03, 0x03 },
818 if (dev->warm) {
819 /* warm state - wake up device from sleep */
821 for (i = 0; i < ARRAY_SIZE(tab); i++) {
822 ret = tda10071_wr_reg_mask(dev, tab[i].reg,
823 tab[i].val, tab[i].mask);
824 if (ret)
825 goto error;
828 cmd.args[0] = CMD_SET_SLEEP_MODE;
829 cmd.args[1] = 0;
830 cmd.args[2] = 0;
831 cmd.len = 3;
832 ret = tda10071_cmd_execute(dev, &cmd);
833 if (ret)
834 goto error;
835 } else {
836 /* cold state - try to download firmware */
838 /* request the firmware, this will block and timeout */
839 ret = request_firmware(&fw, fw_file, &client->dev);
840 if (ret) {
841 dev_err(&client->dev,
842 "did not find the firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware\n",
843 fw_file, ret);
844 goto error;
847 /* init */
848 for (i = 0; i < ARRAY_SIZE(tab2); i++) {
849 ret = tda10071_wr_reg_mask(dev, tab2[i].reg,
850 tab2[i].val, tab2[i].mask);
851 if (ret)
852 goto error_release_firmware;
855 /* download firmware */
856 ret = regmap_write(dev->regmap, 0xe0, 0x7f);
857 if (ret)
858 goto error_release_firmware;
860 ret = regmap_write(dev->regmap, 0xf7, 0x81);
861 if (ret)
862 goto error_release_firmware;
864 ret = regmap_write(dev->regmap, 0xf8, 0x00);
865 if (ret)
866 goto error_release_firmware;
868 ret = regmap_write(dev->regmap, 0xf9, 0x00);
869 if (ret)
870 goto error_release_firmware;
872 dev_info(&client->dev,
873 "found a '%s' in cold state, will try to load a firmware\n",
874 tda10071_ops.info.name);
875 dev_info(&client->dev, "downloading firmware from file '%s'\n",
876 fw_file);
878 /* do not download last byte */
879 fw_size = fw->size - 1;
881 for (remaining = fw_size; remaining > 0;
882 remaining -= (dev->i2c_wr_max - 1)) {
883 len = remaining;
884 if (len > (dev->i2c_wr_max - 1))
885 len = (dev->i2c_wr_max - 1);
887 ret = regmap_bulk_write(dev->regmap, 0xfa,
888 (u8 *) &fw->data[fw_size - remaining], len);
889 if (ret) {
890 dev_err(&client->dev,
891 "firmware download failed=%d\n", ret);
892 goto error_release_firmware;
895 release_firmware(fw);
897 ret = regmap_write(dev->regmap, 0xf7, 0x0c);
898 if (ret)
899 goto error;
901 ret = regmap_write(dev->regmap, 0xe0, 0x00);
902 if (ret)
903 goto error;
905 /* wait firmware start */
906 msleep(250);
908 /* firmware status */
909 ret = regmap_read(dev->regmap, 0x51, &uitmp);
910 if (ret)
911 goto error;
913 if (uitmp) {
914 dev_info(&client->dev, "firmware did not run\n");
915 ret = -EFAULT;
916 goto error;
917 } else {
918 dev->warm = true;
921 cmd.args[0] = CMD_GET_FW_VERSION;
922 cmd.len = 1;
923 ret = tda10071_cmd_execute(dev, &cmd);
924 if (ret)
925 goto error;
927 ret = regmap_bulk_read(dev->regmap, cmd.len, buf, 4);
928 if (ret)
929 goto error;
931 dev_info(&client->dev, "firmware version %d.%d.%d.%d\n",
932 buf[0], buf[1], buf[2], buf[3]);
933 dev_info(&client->dev, "found a '%s' in warm state\n",
934 tda10071_ops.info.name);
936 ret = regmap_bulk_read(dev->regmap, 0x81, buf, 2);
937 if (ret)
938 goto error;
940 cmd.args[0] = CMD_DEMOD_INIT;
941 cmd.args[1] = ((dev->clk / 1000) >> 8) & 0xff;
942 cmd.args[2] = ((dev->clk / 1000) >> 0) & 0xff;
943 cmd.args[3] = buf[0];
944 cmd.args[4] = buf[1];
945 cmd.args[5] = dev->pll_multiplier;
946 cmd.args[6] = dev->spec_inv;
947 cmd.args[7] = 0x00;
948 cmd.len = 8;
949 ret = tda10071_cmd_execute(dev, &cmd);
950 if (ret)
951 goto error;
953 if (dev->tuner_i2c_addr)
954 tmp = dev->tuner_i2c_addr;
955 else
956 tmp = 0x14;
958 cmd.args[0] = CMD_TUNER_INIT;
959 cmd.args[1] = 0x00;
960 cmd.args[2] = 0x00;
961 cmd.args[3] = 0x00;
962 cmd.args[4] = 0x00;
963 cmd.args[5] = tmp;
964 cmd.args[6] = 0x00;
965 cmd.args[7] = 0x03;
966 cmd.args[8] = 0x02;
967 cmd.args[9] = 0x02;
968 cmd.args[10] = 0x00;
969 cmd.args[11] = 0x00;
970 cmd.args[12] = 0x00;
971 cmd.args[13] = 0x00;
972 cmd.args[14] = 0x00;
973 cmd.len = 15;
974 ret = tda10071_cmd_execute(dev, &cmd);
975 if (ret)
976 goto error;
978 cmd.args[0] = CMD_MPEG_CONFIG;
979 cmd.args[1] = 0;
980 cmd.args[2] = dev->ts_mode;
981 cmd.args[3] = 0x00;
982 cmd.args[4] = 0x04;
983 cmd.args[5] = 0x00;
984 cmd.len = 6;
985 ret = tda10071_cmd_execute(dev, &cmd);
986 if (ret)
987 goto error;
989 ret = regmap_update_bits(dev->regmap, 0xf0, 0x01, 0x01);
990 if (ret)
991 goto error;
993 cmd.args[0] = CMD_LNB_CONFIG;
994 cmd.args[1] = 0;
995 cmd.args[2] = 150;
996 cmd.args[3] = 3;
997 cmd.args[4] = 22;
998 cmd.args[5] = 1;
999 cmd.args[6] = 1;
1000 cmd.args[7] = 30;
1001 cmd.args[8] = 30;
1002 cmd.args[9] = 30;
1003 cmd.args[10] = 30;
1004 cmd.len = 11;
1005 ret = tda10071_cmd_execute(dev, &cmd);
1006 if (ret)
1007 goto error;
1009 cmd.args[0] = CMD_BER_CONTROL;
1010 cmd.args[1] = 0;
1011 cmd.args[2] = 14;
1012 cmd.args[3] = 14;
1013 cmd.len = 4;
1014 ret = tda10071_cmd_execute(dev, &cmd);
1015 if (ret)
1016 goto error;
1019 /* init stats here in order signal app which stats are supported */
1020 c->strength.len = 1;
1021 c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
1022 c->cnr.len = 1;
1023 c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
1024 c->post_bit_error.len = 1;
1025 c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
1026 c->block_error.len = 1;
1027 c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
1029 return ret;
1030 error_release_firmware:
1031 release_firmware(fw);
1032 error:
1033 dev_dbg(&client->dev, "failed=%d\n", ret);
1034 return ret;
1037 static int tda10071_sleep(struct dvb_frontend *fe)
1039 struct tda10071_dev *dev = fe->demodulator_priv;
1040 struct i2c_client *client = dev->client;
1041 struct tda10071_cmd cmd;
1042 int ret, i;
1043 struct tda10071_reg_val_mask tab[] = {
1044 { 0xcd, 0x07, 0x07 },
1045 { 0x80, 0x02, 0x02 },
1046 { 0xcd, 0xc0, 0xc0 },
1047 { 0xce, 0x1b, 0x1b },
1048 { 0x9d, 0x01, 0x01 },
1049 { 0x9d, 0x02, 0x02 },
1050 { 0x9e, 0x01, 0x01 },
1051 { 0x87, 0x80, 0x80 },
1052 { 0xce, 0x08, 0x08 },
1053 { 0xce, 0x10, 0x10 },
1056 if (!dev->warm) {
1057 ret = -EFAULT;
1058 goto error;
1061 cmd.args[0] = CMD_SET_SLEEP_MODE;
1062 cmd.args[1] = 0;
1063 cmd.args[2] = 1;
1064 cmd.len = 3;
1065 ret = tda10071_cmd_execute(dev, &cmd);
1066 if (ret)
1067 goto error;
1069 for (i = 0; i < ARRAY_SIZE(tab); i++) {
1070 ret = tda10071_wr_reg_mask(dev, tab[i].reg, tab[i].val,
1071 tab[i].mask);
1072 if (ret)
1073 goto error;
1076 return ret;
1077 error:
1078 dev_dbg(&client->dev, "failed=%d\n", ret);
1079 return ret;
1082 static int tda10071_get_tune_settings(struct dvb_frontend *fe,
1083 struct dvb_frontend_tune_settings *s)
1085 s->min_delay_ms = 8000;
1086 s->step_size = 0;
1087 s->max_drift = 0;
1089 return 0;
1092 static const struct dvb_frontend_ops tda10071_ops = {
1093 .delsys = { SYS_DVBS, SYS_DVBS2 },
1094 .info = {
1095 .name = "NXP TDA10071",
1096 .frequency_min_hz = 950 * MHz,
1097 .frequency_max_hz = 2150 * MHz,
1098 .frequency_tolerance_hz = 5 * MHz,
1099 .symbol_rate_min = 1000000,
1100 .symbol_rate_max = 45000000,
1101 .caps = FE_CAN_INVERSION_AUTO |
1102 FE_CAN_FEC_1_2 |
1103 FE_CAN_FEC_2_3 |
1104 FE_CAN_FEC_3_4 |
1105 FE_CAN_FEC_4_5 |
1106 FE_CAN_FEC_5_6 |
1107 FE_CAN_FEC_6_7 |
1108 FE_CAN_FEC_7_8 |
1109 FE_CAN_FEC_8_9 |
1110 FE_CAN_FEC_AUTO |
1111 FE_CAN_QPSK |
1112 FE_CAN_RECOVER |
1113 FE_CAN_2G_MODULATION
1116 .get_tune_settings = tda10071_get_tune_settings,
1118 .init = tda10071_init,
1119 .sleep = tda10071_sleep,
1121 .set_frontend = tda10071_set_frontend,
1122 .get_frontend = tda10071_get_frontend,
1124 .read_status = tda10071_read_status,
1125 .read_snr = tda10071_read_snr,
1126 .read_signal_strength = tda10071_read_signal_strength,
1127 .read_ber = tda10071_read_ber,
1128 .read_ucblocks = tda10071_read_ucblocks,
1130 .diseqc_send_master_cmd = tda10071_diseqc_send_master_cmd,
1131 .diseqc_recv_slave_reply = tda10071_diseqc_recv_slave_reply,
1132 .diseqc_send_burst = tda10071_diseqc_send_burst,
1134 .set_tone = tda10071_set_tone,
1135 .set_voltage = tda10071_set_voltage,
1138 static struct dvb_frontend *tda10071_get_dvb_frontend(struct i2c_client *client)
1140 struct tda10071_dev *dev = i2c_get_clientdata(client);
1142 dev_dbg(&client->dev, "\n");
1144 return &dev->fe;
1147 static int tda10071_probe(struct i2c_client *client,
1148 const struct i2c_device_id *id)
1150 struct tda10071_dev *dev;
1151 struct tda10071_platform_data *pdata = client->dev.platform_data;
1152 int ret;
1153 unsigned int uitmp;
1154 static const struct regmap_config regmap_config = {
1155 .reg_bits = 8,
1156 .val_bits = 8,
1159 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1160 if (!dev) {
1161 ret = -ENOMEM;
1162 goto err;
1165 dev->client = client;
1166 mutex_init(&dev->cmd_execute_mutex);
1167 dev->clk = pdata->clk;
1168 dev->i2c_wr_max = pdata->i2c_wr_max;
1169 dev->ts_mode = pdata->ts_mode;
1170 dev->spec_inv = pdata->spec_inv;
1171 dev->pll_multiplier = pdata->pll_multiplier;
1172 dev->tuner_i2c_addr = pdata->tuner_i2c_addr;
1173 dev->regmap = devm_regmap_init_i2c(client, &regmap_config);
1174 if (IS_ERR(dev->regmap)) {
1175 ret = PTR_ERR(dev->regmap);
1176 goto err_kfree;
1179 /* chip ID */
1180 ret = regmap_read(dev->regmap, 0xff, &uitmp);
1181 if (ret)
1182 goto err_kfree;
1183 if (uitmp != 0x0f) {
1184 ret = -ENODEV;
1185 goto err_kfree;
1188 /* chip type */
1189 ret = regmap_read(dev->regmap, 0xdd, &uitmp);
1190 if (ret)
1191 goto err_kfree;
1192 if (uitmp != 0x00) {
1193 ret = -ENODEV;
1194 goto err_kfree;
1197 /* chip version */
1198 ret = regmap_read(dev->regmap, 0xfe, &uitmp);
1199 if (ret)
1200 goto err_kfree;
1201 if (uitmp != 0x01) {
1202 ret = -ENODEV;
1203 goto err_kfree;
1206 /* create dvb_frontend */
1207 memcpy(&dev->fe.ops, &tda10071_ops, sizeof(struct dvb_frontend_ops));
1208 dev->fe.demodulator_priv = dev;
1209 i2c_set_clientdata(client, dev);
1211 /* setup callbacks */
1212 pdata->get_dvb_frontend = tda10071_get_dvb_frontend;
1214 dev_info(&client->dev, "NXP TDA10071 successfully identified\n");
1215 return 0;
1216 err_kfree:
1217 kfree(dev);
1218 err:
1219 dev_dbg(&client->dev, "failed=%d\n", ret);
1220 return ret;
1223 static int tda10071_remove(struct i2c_client *client)
1225 struct tda10071_dev *dev = i2c_get_clientdata(client);
1227 dev_dbg(&client->dev, "\n");
1229 kfree(dev);
1230 return 0;
1233 static const struct i2c_device_id tda10071_id_table[] = {
1234 {"tda10071_cx24118", 0},
1237 MODULE_DEVICE_TABLE(i2c, tda10071_id_table);
1239 static struct i2c_driver tda10071_driver = {
1240 .driver = {
1241 .name = "tda10071",
1242 .suppress_bind_attrs = true,
1244 .probe = tda10071_probe,
1245 .remove = tda10071_remove,
1246 .id_table = tda10071_id_table,
1249 module_i2c_driver(tda10071_driver);
1251 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
1252 MODULE_DESCRIPTION("NXP TDA10071 DVB-S/S2 demodulator driver");
1253 MODULE_LICENSE("GPL");
1254 MODULE_FIRMWARE(TDA10071_FIRMWARE);