treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / media / i2c / ov7640.c
blob010803d58ce8b3924c50f651ac63eddec16a66e1
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2005-2006 Micronas USA Inc.
4 */
6 #include <linux/init.h>
7 #include <linux/module.h>
8 #include <linux/i2c.h>
9 #include <linux/videodev2.h>
10 #include <media/v4l2-device.h>
11 #include <linux/slab.h>
13 MODULE_DESCRIPTION("OmniVision ov7640 sensor driver");
14 MODULE_LICENSE("GPL v2");
16 static const u8 initial_registers[] = {
17 0x12, 0x80,
18 0x12, 0x54,
19 0x14, 0x24,
20 0x15, 0x01,
21 0x28, 0x20,
22 0x75, 0x82,
23 0xFF, 0xFF, /* Terminator (reg 0xFF is unused) */
26 static int write_regs(struct i2c_client *client, const u8 *regs)
28 int i;
30 for (i = 0; regs[i] != 0xFF; i += 2)
31 if (i2c_smbus_write_byte_data(client, regs[i], regs[i + 1]) < 0)
32 return -1;
33 return 0;
36 /* ----------------------------------------------------------------------- */
38 static const struct v4l2_subdev_ops ov7640_ops;
40 static int ov7640_probe(struct i2c_client *client,
41 const struct i2c_device_id *id)
43 struct i2c_adapter *adapter = client->adapter;
44 struct v4l2_subdev *sd;
46 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
47 return -ENODEV;
49 sd = devm_kzalloc(&client->dev, sizeof(*sd), GFP_KERNEL);
50 if (sd == NULL)
51 return -ENOMEM;
52 v4l2_i2c_subdev_init(sd, client, &ov7640_ops);
54 client->flags = I2C_CLIENT_SCCB;
56 v4l_info(client, "chip found @ 0x%02x (%s)\n",
57 client->addr << 1, client->adapter->name);
59 if (write_regs(client, initial_registers) < 0) {
60 v4l_err(client, "error initializing OV7640\n");
61 return -ENODEV;
64 return 0;
68 static int ov7640_remove(struct i2c_client *client)
70 struct v4l2_subdev *sd = i2c_get_clientdata(client);
72 v4l2_device_unregister_subdev(sd);
74 return 0;
77 static const struct i2c_device_id ov7640_id[] = {
78 { "ov7640", 0 },
79 { }
81 MODULE_DEVICE_TABLE(i2c, ov7640_id);
83 static struct i2c_driver ov7640_driver = {
84 .driver = {
85 .name = "ov7640",
87 .probe = ov7640_probe,
88 .remove = ov7640_remove,
89 .id_table = ov7640_id,
91 module_i2c_driver(ov7640_driver);