?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / media / i2c / s5k4ecgx.c
blobb2d53417badf6c283c3153d9d22702b2799e9598
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Driver for Samsung S5K4ECGX 1/4" 5Mp CMOS Image Sensor SoC
4 * with an Embedded Image Signal Processor.
5 *
6 * Copyright (C) 2012, Linaro, Sangwook Lee <sangwook.lee@linaro.org>
7 * Copyright (C) 2012, Insignal Co,. Ltd, Homin Lee <suapapa@insignal.co.kr>
8 *
9 * Based on s5k6aa and noon010pc30 driver
10 * Copyright (C) 2011, Samsung Electronics Co., Ltd.
11 */
12
13 #include <linux/clk.h>
14 #include <linux/crc32.h>
15 #include <linux/ctype.h>
16 #include <linux/delay.h>
17 #include <linux/firmware.h>
18 #include <linux/gpio.h>
19 #include <linux/i2c.h>
20 #include <linux/module.h>
21 #include <linux/regulator/consumer.h>
22 #include <linux/slab.h>
23 #include <asm/unaligned.h>
24
25 #include <media/media-entity.h>
26 #include <media/i2c/s5k4ecgx.h>
27 #include <media/v4l2-ctrls.h>
28 #include <media/v4l2-device.h>
29 #include <media/v4l2-mediabus.h>
30 #include <media/v4l2-subdev.h>
31
32 static int debug;
33 module_param(debug, int, 0644);
34
35 #define S5K4ECGX_DRIVER_NAME "s5k4ecgx"
36 #define S5K4ECGX_FIRMWARE "s5k4ecgx.bin"
37
38 /* Firmware revision information */
39 #define REG_FW_REVISION 0x700001a6
40 #define REG_FW_VERSION 0x700001a4
41 #define S5K4ECGX_REVISION_1_1 0x11
42 #define S5K4ECGX_FW_VERSION 0x4ec0
43
44 /* General purpose parameters */
45 #define REG_USER_BRIGHTNESS 0x7000022c
46 #define REG_USER_CONTRAST 0x7000022e
47 #define REG_USER_SATURATION 0x70000230
48
49 #define REG_G_ENABLE_PREV 0x7000023e
50 #define REG_G_ENABLE_PREV_CHG 0x70000240
51 #define REG_G_NEW_CFG_SYNC 0x7000024a
52 #define REG_G_PREV_IN_WIDTH 0x70000250
53 #define REG_G_PREV_IN_HEIGHT 0x70000252
54 #define REG_G_PREV_IN_XOFFS 0x70000254
55 #define REG_G_PREV_IN_YOFFS 0x70000256
56 #define REG_G_CAP_IN_WIDTH 0x70000258
57 #define REG_G_CAP_IN_HEIGHT 0x7000025a
58 #define REG_G_CAP_IN_XOFFS 0x7000025c
59 #define REG_G_CAP_IN_YOFFS 0x7000025e
60 #define REG_G_INPUTS_CHANGE_REQ 0x70000262
61 #define REG_G_ACTIVE_PREV_CFG 0x70000266
62 #define REG_G_PREV_CFG_CHG 0x70000268
63 #define REG_G_PREV_OPEN_AFTER_CH 0x7000026a
64
65 /* Preview context register sets. n = 0...4. */
66 #define PREG(n, x) ((n) * 0x30 + (x))
67 #define REG_P_OUT_WIDTH(n) PREG(n, 0x700002a6)
68 #define REG_P_OUT_HEIGHT(n) PREG(n, 0x700002a8)
69 #define REG_P_FMT(n) PREG(n, 0x700002aa)
70 #define REG_P_PVI_MASK(n) PREG(n, 0x700002b4)
71 #define REG_P_FR_TIME_TYPE(n) PREG(n, 0x700002be)
72 #define FR_TIME_DYNAMIC 0
73 #define FR_TIME_FIXED 1
74 #define FR_TIME_FIXED_ACCURATE 2
75 #define REG_P_FR_TIME_Q_TYPE(n) PREG(n, 0x700002c0)
76 #define FR_TIME_Q_DYNAMIC 0
77 #define FR_TIME_Q_BEST_FRRATE 1
78 #define FR_TIME_Q_BEST_QUALITY 2
79
80 /* Frame period in 0.1 ms units */
81 #define REG_P_MAX_FR_TIME(n) PREG(n, 0x700002c2)
82 #define REG_P_MIN_FR_TIME(n) PREG(n, 0x700002c4)
83 #define US_TO_FR_TIME(__t) ((__t) / 100)
84 #define REG_P_PREV_MIRROR(n) PREG(n, 0x700002d0)
85 #define REG_P_CAP_MIRROR(n) PREG(n, 0x700002d2)
86
87 #define REG_G_PREVZOOM_IN_WIDTH 0x70000494
88 #define REG_G_PREVZOOM_IN_HEIGHT 0x70000496
89 #define REG_G_PREVZOOM_IN_XOFFS 0x70000498
90 #define REG_G_PREVZOOM_IN_YOFFS 0x7000049a
91 #define REG_G_CAPZOOM_IN_WIDTH 0x7000049c
92 #define REG_G_CAPZOOM_IN_HEIGHT 0x7000049e
93 #define REG_G_CAPZOOM_IN_XOFFS 0x700004a0
94 #define REG_G_CAPZOOM_IN_YOFFS 0x700004a2
95
96 /* n = 0...4 */
97 #define REG_USER_SHARPNESS(n) (0x70000a28 + (n) * 0xb6)
98
99 /* Reduce sharpness range for user space API */
100 #define SHARPNESS_DIV 8208
101 #define TOK_TERM 0xffffffff
102
103 /*
104 * FIXME: This is copied from s5k6aa, because of no information
105 * in the S5K4ECGX datasheet.
106 * H/W register Interface (0xd0000000 - 0xd0000fff)
107 */
108 #define AHB_MSB_ADDR_PTR 0xfcfc
109 #define GEN_REG_OFFSH 0xd000
110 #define REG_CMDWR_ADDRH 0x0028
111 #define REG_CMDWR_ADDRL 0x002a
112 #define REG_CMDRD_ADDRH 0x002c
113 #define REG_CMDRD_ADDRL 0x002e
114 #define REG_CMDBUF0_ADDR 0x0f12
115
116 struct s5k4ecgx_frmsize {
117 struct v4l2_frmsize_discrete size;
118 /* Fixed sensor matrix crop rectangle */
119 struct v4l2_rect input_window;
120 };
121
122 struct regval_list {
123 u32 addr;
124 u16 val;
125 };
126
127 /*
128 * TODO: currently only preview is supported and snapshot (capture)
129 * is not implemented yet
130 */
131 static const struct s5k4ecgx_frmsize s5k4ecgx_prev_sizes[] = {
132 {
133 .size = { 176, 144 },
134 .input_window = { 0x00, 0x00, 0x928, 0x780 },
135 }, {
136 .size = { 352, 288 },
137 .input_window = { 0x00, 0x00, 0x928, 0x780 },
138 }, {
139 .size = { 640, 480 },
140 .input_window = { 0x00, 0x00, 0xa00, 0x780 },
141 }, {
142 .size = { 720, 480 },
143 .input_window = { 0x00, 0x00, 0xa00, 0x6a8 },
144 }
145 };
146
147 #define S5K4ECGX_NUM_PREV ARRAY_SIZE(s5k4ecgx_prev_sizes)
148
149 struct s5k4ecgx_pixfmt {
150 u32 code;
151 u32 colorspace;
152 /* REG_TC_PCFG_Format register value */
153 u16 reg_p_format;
154 };
155
156 /* By default value, output from sensor will be YUV422 0-255 */
157 static const struct s5k4ecgx_pixfmt s5k4ecgx_formats[] = {
158 { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 5 },
159 };
160
161 static const char * const s5k4ecgx_supply_names[] = {
162 /*
163 * Usually 2.8V is used for analog power (vdda)
164 * and digital IO (vddio, vdddcore)
165 */
166 "vdda",
167 "vddio",
168 "vddcore",
169 "vddreg", /* The internal s5k4ecgx regulator's supply (1.8V) */
170 };
171
172 #define S5K4ECGX_NUM_SUPPLIES ARRAY_SIZE(s5k4ecgx_supply_names)
173
174 enum s5k4ecgx_gpio_id {
175 STBY,
176 RST,
177 GPIO_NUM,
178 };
179
180 struct s5k4ecgx {
181 struct v4l2_subdev sd;
182 struct media_pad pad;
183 struct v4l2_ctrl_handler handler;
184
185 struct s5k4ecgx_platform_data *pdata;
186 const struct s5k4ecgx_pixfmt *curr_pixfmt;
187 const struct s5k4ecgx_frmsize *curr_frmsize;
188 struct mutex lock;
189 u8 streaming;
190 u8 set_params;
191
192 struct regulator_bulk_data supplies[S5K4ECGX_NUM_SUPPLIES];
193 struct s5k4ecgx_gpio gpio[GPIO_NUM];
194 };
195
196 static inline struct s5k4ecgx *to_s5k4ecgx(struct v4l2_subdev *sd)
197 {
198 return container_of(sd, struct s5k4ecgx, sd);
199 }
200
201 static int s5k4ecgx_i2c_read(struct i2c_client *client, u16 addr, u16 *val)
202 {
203 u8 wbuf[2] = { addr >> 8, addr & 0xff };
204 struct i2c_msg msg[2];
205 u8 rbuf[2];
206 int ret;
207
208 msg[0].addr = client->addr;
209 msg[0].flags = 0;
210 msg[0].len = 2;
211 msg[0].buf = wbuf;
212
213 msg[1].addr = client->addr;
214 msg[1].flags = I2C_M_RD;
215 msg[1].len = 2;
216 msg[1].buf = rbuf;
217
218 ret = i2c_transfer(client->adapter, msg, 2);
219 *val = be16_to_cpu(*((__be16 *)rbuf));
220
221 v4l2_dbg(4, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val);
222
223 return ret == 2 ? 0 : ret;
224 }
225
226 static int s5k4ecgx_i2c_write(struct i2c_client *client, u16 addr, u16 val)
227 {
228 u8 buf[4] = { addr >> 8, addr & 0xff, val >> 8, val & 0xff };
229
230 int ret = i2c_master_send(client, buf, 4);
231 v4l2_dbg(4, debug, client, "i2c_write: 0x%04x : 0x%04x\n", addr, val);
232
233 return ret == 4 ? 0 : ret;
234 }
235
236 static int s5k4ecgx_write(struct i2c_client *client, u32 addr, u16 val)
237 {
238 u16 high = addr >> 16, low = addr & 0xffff;
239 int ret;
240
241 v4l2_dbg(3, debug, client, "write: 0x%08x : 0x%04x\n", addr, val);
242
243 ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRH, high);
244 if (!ret)
245 ret = s5k4ecgx_i2c_write(client, REG_CMDWR_ADDRL, low);
246 if (!ret)
247 ret = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val);
248
249 return ret;
250 }
251
252 static int s5k4ecgx_read(struct i2c_client *client, u32 addr, u16 *val)
253 {
254 u16 high = addr >> 16, low = addr & 0xffff;
255 int ret;
256
257 ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRH, high);
258 if (!ret)
259 ret = s5k4ecgx_i2c_write(client, REG_CMDRD_ADDRL, low);
260 if (!ret)
261 ret = s5k4ecgx_i2c_read(client, REG_CMDBUF0_ADDR, val);
262
263 return ret;
264 }
265
266 static int s5k4ecgx_read_fw_ver(struct v4l2_subdev *sd)
267 {
268 struct i2c_client *client = v4l2_get_subdevdata(sd);
269 u16 hw_rev, fw_ver = 0;
270 int ret;
271
272 ret = s5k4ecgx_read(client, REG_FW_VERSION, &fw_ver);
273 if (ret < 0 || fw_ver != S5K4ECGX_FW_VERSION) {
274 v4l2_err(sd, "FW version check failed!\n");
275 return -ENODEV;
276 }
277
278 ret = s5k4ecgx_read(client, REG_FW_REVISION, &hw_rev);
279 if (ret < 0)
280 return ret;
281
282 v4l2_info(sd, "chip found FW ver: 0x%x, HW rev: 0x%x\n",
283 fw_ver, hw_rev);
284 return 0;
285 }
286
287 static int s5k4ecgx_set_ahb_address(struct v4l2_subdev *sd)
288 {
289 struct i2c_client *client = v4l2_get_subdevdata(sd);
290 int ret;
291
292 /* Set APB peripherals start address */
293 ret = s5k4ecgx_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH);
294 if (ret < 0)
295 return ret;
296 /*
297 * FIXME: This is copied from s5k6aa, because of no information
298 * in s5k4ecgx's datasheet.
299 * sw_reset is activated to put device into idle status
300 */
301 ret = s5k4ecgx_i2c_write(client, 0x0010, 0x0001);
302 if (ret < 0)
303 return ret;
304
305 ret = s5k4ecgx_i2c_write(client, 0x1030, 0x0000);
306 if (ret < 0)
307 return ret;
308 /* Halt ARM CPU */
309 return s5k4ecgx_i2c_write(client, 0x0014, 0x0001);
310 }
311
312 #define FW_CRC_SIZE 4
313 /* Register address, value are 4, 2 bytes */
314 #define FW_RECORD_SIZE 6
315 /*
316 * The firmware has following format:
317 * < total number of records (4 bytes + 2 bytes padding) N >,
318 * < record 0 >, ..., < record N - 1 >, < CRC32-CCITT (4-bytes) >,
319 * where "record" is a 4-byte register address followed by 2-byte
320 * register value (little endian).
321 * The firmware generator can be found in following git repository:
322 * git://git.linaro.org/people/sangwook/fimc-v4l2-app.git
323 */
324 static int s5k4ecgx_load_firmware(struct v4l2_subdev *sd)
325 {
326 struct i2c_client *client = v4l2_get_subdevdata(sd);
327 const struct firmware *fw;
328 const u8 *ptr;
329 int err, i, regs_num;
330 u32 addr, crc, crc_file, addr_inc = 0;
331 u16 val;
332
333 err = request_firmware(&fw, S5K4ECGX_FIRMWARE, sd->v4l2_dev->dev);
334 if (err) {
335 v4l2_err(sd, "Failed to read firmware %s\n", S5K4ECGX_FIRMWARE);
336 return err;
337 }
338 regs_num = get_unaligned_le32(fw->data);
339
340 v4l2_dbg(3, debug, sd, "FW: %s size %zu register sets %d\n",
341 S5K4ECGX_FIRMWARE, fw->size, regs_num);
342
343 regs_num++; /* Add header */
344 if (fw->size != regs_num * FW_RECORD_SIZE + FW_CRC_SIZE) {
345 err = -EINVAL;
346 goto fw_out;
347 }
348 crc_file = get_unaligned_le32(fw->data + regs_num * FW_RECORD_SIZE);
349 crc = crc32_le(~0, fw->data, regs_num * FW_RECORD_SIZE);
350 if (crc != crc_file) {
351 v4l2_err(sd, "FW: invalid crc (%#x:%#x)\n", crc, crc_file);
352 err = -EINVAL;
353 goto fw_out;
354 }
355 ptr = fw->data + FW_RECORD_SIZE;
356 for (i = 1; i < regs_num; i++) {
357 addr = get_unaligned_le32(ptr);
358 ptr += sizeof(u32);
359 val = get_unaligned_le16(ptr);
360 ptr += sizeof(u16);
361 if (addr - addr_inc != 2)
362 err = s5k4ecgx_write(client, addr, val);
363 else
364 err = s5k4ecgx_i2c_write(client, REG_CMDBUF0_ADDR, val);
365 if (err)
366 break;
367 addr_inc = addr;
368 }
369 fw_out:
370 release_firmware(fw);
371 return err;
372 }
373
374 /* Set preview and capture input window */
375 static int s5k4ecgx_set_input_window(struct i2c_client *c,
376 const struct v4l2_rect *r)
377 {
378 int ret;
379
380 ret = s5k4ecgx_write(c, REG_G_PREV_IN_WIDTH, r->width);
381 if (!ret)
382 ret = s5k4ecgx_write(c, REG_G_PREV_IN_HEIGHT, r->height);
383 if (!ret)
384 ret = s5k4ecgx_write(c, REG_G_PREV_IN_XOFFS, r->left);
385 if (!ret)
386 ret = s5k4ecgx_write(c, REG_G_PREV_IN_YOFFS, r->top);
387 if (!ret)
388 ret = s5k4ecgx_write(c, REG_G_CAP_IN_WIDTH, r->width);
389 if (!ret)
390 ret = s5k4ecgx_write(c, REG_G_CAP_IN_HEIGHT, r->height);
391 if (!ret)
392 ret = s5k4ecgx_write(c, REG_G_CAP_IN_XOFFS, r->left);
393 if (!ret)
394 ret = s5k4ecgx_write(c, REG_G_CAP_IN_YOFFS, r->top);
395
396 return ret;
397 }
398
399 /* Set preview and capture zoom input window */
400 static int s5k4ecgx_set_zoom_window(struct i2c_client *c,
401 const struct v4l2_rect *r)
402 {
403 int ret;
404
405 ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width);
406 if (!ret)
407 ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height);
408 if (!ret)
409 ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left);
410 if (!ret)
411 ret = s5k4ecgx_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top);
412 if (!ret)
413 ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_WIDTH, r->width);
414 if (!ret)
415 ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_HEIGHT, r->height);
416 if (!ret)
417 ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_XOFFS, r->left);
418 if (!ret)
419 ret = s5k4ecgx_write(c, REG_G_CAPZOOM_IN_YOFFS, r->top);
420
421 return ret;
422 }
423
424 static int s5k4ecgx_set_output_framefmt(struct s5k4ecgx *priv)
425 {
426 struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
427 int ret;
428
429 ret = s5k4ecgx_write(client, REG_P_OUT_WIDTH(0),
430 priv->curr_frmsize->size.width);
431 if (!ret)
432 ret = s5k4ecgx_write(client, REG_P_OUT_HEIGHT(0),
433 priv->curr_frmsize->size.height);
434 if (!ret)
435 ret = s5k4ecgx_write(client, REG_P_FMT(0),
436 priv->curr_pixfmt->reg_p_format);
437 return ret;
438 }
439
440 static int s5k4ecgx_init_sensor(struct v4l2_subdev *sd)
441 {
442 int ret;
443
444 ret = s5k4ecgx_set_ahb_address(sd);
445
446 /* The delay is from manufacturer's settings */
447 msleep(100);
448
449 if (!ret)
450 ret = s5k4ecgx_load_firmware(sd);
451 if (ret)
452 v4l2_err(sd, "Failed to write initial settings\n");
453
454 return ret;
455 }
456
457 static int s5k4ecgx_gpio_set_value(struct s5k4ecgx *priv, int id, u32 val)
458 {
459 if (!gpio_is_valid(priv->gpio[id].gpio))
460 return 0;
461 gpio_set_value(priv->gpio[id].gpio, val);
462
463 return 1;
464 }
465
466 static int __s5k4ecgx_power_on(struct s5k4ecgx *priv)
467 {
468 int ret;
469
470 ret = regulator_bulk_enable(S5K4ECGX_NUM_SUPPLIES, priv->supplies);
471 if (ret)
472 return ret;
473 usleep_range(30, 50);
474
475 /* The polarity of STBY is controlled by TSP */
476 if (s5k4ecgx_gpio_set_value(priv, STBY, priv->gpio[STBY].level))
477 usleep_range(30, 50);
478
479 if (s5k4ecgx_gpio_set_value(priv, RST, priv->gpio[RST].level))
480 usleep_range(30, 50);
481
482 return 0;
483 }
484
485 static int __s5k4ecgx_power_off(struct s5k4ecgx *priv)
486 {
487 if (s5k4ecgx_gpio_set_value(priv, RST, !priv->gpio[RST].level))
488 usleep_range(30, 50);
489
490 if (s5k4ecgx_gpio_set_value(priv, STBY, !priv->gpio[STBY].level))
491 usleep_range(30, 50);
492
493 priv->streaming = 0;
494
495 return regulator_bulk_disable(S5K4ECGX_NUM_SUPPLIES, priv->supplies);
496 }
497
498 /* Find nearest matching image pixel size. */
499 static int s5k4ecgx_try_frame_size(struct v4l2_mbus_framefmt *mf,
500 const struct s5k4ecgx_frmsize **size)
501 {
502 unsigned int min_err = ~0;
503 int i = ARRAY_SIZE(s5k4ecgx_prev_sizes);
504 const struct s5k4ecgx_frmsize *fsize = &s5k4ecgx_prev_sizes[0],
505 *match = NULL;
506
507 while (i--) {
508 int err = abs(fsize->size.width - mf->width)
509 + abs(fsize->size.height - mf->height);
510 if (err < min_err) {
511 min_err = err;
512 match = fsize;
513 }
514 fsize++;
515 }
516 if (match) {
517 mf->width = match->size.width;
518 mf->height = match->size.height;
519 if (size)
520 *size = match;
521 return 0;
522 }
523
524 return -EINVAL;
525 }
526
527 static int s5k4ecgx_enum_mbus_code(struct v4l2_subdev *sd,
528 struct v4l2_subdev_pad_config *cfg,
529 struct v4l2_subdev_mbus_code_enum *code)
530 {
531 if (code->index >= ARRAY_SIZE(s5k4ecgx_formats))
532 return -EINVAL;
533 code->code = s5k4ecgx_formats[code->index].code;
534
535 return 0;
536 }
537
538 static int s5k4ecgx_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
539 struct v4l2_subdev_format *fmt)
540 {
541 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
542 struct v4l2_mbus_framefmt *mf;
543
544 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
545 if (cfg) {
546 mf = v4l2_subdev_get_try_format(sd, cfg, 0);
547 fmt->format = *mf;
548 }
549 return 0;
550 }
551
552 mf = &fmt->format;
553
554 mutex_lock(&priv->lock);
555 mf->width = priv->curr_frmsize->size.width;
556 mf->height = priv->curr_frmsize->size.height;
557 mf->code = priv->curr_pixfmt->code;
558 mf->colorspace = priv->curr_pixfmt->colorspace;
559 mf->field = V4L2_FIELD_NONE;
560 mutex_unlock(&priv->lock);
561
562 return 0;
563 }
564
565 static const struct s5k4ecgx_pixfmt *s5k4ecgx_try_fmt(struct v4l2_subdev *sd,
566 struct v4l2_mbus_framefmt *mf)
567 {
568 int i = ARRAY_SIZE(s5k4ecgx_formats);
569
570 while (--i)
571 if (mf->code == s5k4ecgx_formats[i].code)
572 break;
573 mf->code = s5k4ecgx_formats[i].code;
574
575 return &s5k4ecgx_formats[i];
576 }
577
578 static int s5k4ecgx_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
579 struct v4l2_subdev_format *fmt)
580 {
581 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
582 const struct s5k4ecgx_frmsize *fsize = NULL;
583 const struct s5k4ecgx_pixfmt *pf;
584 struct v4l2_mbus_framefmt *mf;
585 int ret = 0;
586
587 pf = s5k4ecgx_try_fmt(sd, &fmt->format);
588 s5k4ecgx_try_frame_size(&fmt->format, &fsize);
589 fmt->format.colorspace = V4L2_COLORSPACE_JPEG;
590 fmt->format.field = V4L2_FIELD_NONE;
591
592 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
593 if (cfg) {
594 mf = v4l2_subdev_get_try_format(sd, cfg, 0);
595 *mf = fmt->format;
596 }
597 return 0;
598 }
599
600 mutex_lock(&priv->lock);
601 if (!priv->streaming) {
602 priv->curr_frmsize = fsize;
603 priv->curr_pixfmt = pf;
604 priv->set_params = 1;
605 } else {
606 ret = -EBUSY;
607 }
608 mutex_unlock(&priv->lock);
609
610 return ret;
611 }
612
613 static const struct v4l2_subdev_pad_ops s5k4ecgx_pad_ops = {
614 .enum_mbus_code = s5k4ecgx_enum_mbus_code,
615 .get_fmt = s5k4ecgx_get_fmt,
616 .set_fmt = s5k4ecgx_set_fmt,
617 };
618
619 /*
620 * V4L2 subdev controls
621 */
622 static int s5k4ecgx_s_ctrl(struct v4l2_ctrl *ctrl)
623 {
624 struct v4l2_subdev *sd = &container_of(ctrl->handler, struct s5k4ecgx,
625 handler)->sd;
626 struct i2c_client *client = v4l2_get_subdevdata(sd);
627 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
628 unsigned int i;
629 int err = 0;
630
631 v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val);
632
633 mutex_lock(&priv->lock);
634 switch (ctrl->id) {
635 case V4L2_CID_CONTRAST:
636 err = s5k4ecgx_write(client, REG_USER_CONTRAST, ctrl->val);
637 break;
638
639 case V4L2_CID_SATURATION:
640 err = s5k4ecgx_write(client, REG_USER_SATURATION, ctrl->val);
641 break;
642
643 case V4L2_CID_SHARPNESS:
644 /* TODO: Revisit, is this setting for all presets ? */
645 for (i = 0; i < 4 && !err; i++)
646 err = s5k4ecgx_write(client, REG_USER_SHARPNESS(i),
647 ctrl->val * SHARPNESS_DIV);
648 break;
649
650 case V4L2_CID_BRIGHTNESS:
651 err = s5k4ecgx_write(client, REG_USER_BRIGHTNESS, ctrl->val);
652 break;
653 }
654 mutex_unlock(&priv->lock);
655 if (err < 0)
656 v4l2_err(sd, "Failed to write s_ctrl err %d\n", err);
657
658 return err;
659 }
660
661 static const struct v4l2_ctrl_ops s5k4ecgx_ctrl_ops = {
662 .s_ctrl = s5k4ecgx_s_ctrl,
663 };
664
665 /*
666 * Reading s5k4ecgx version information
667 */
668 static int s5k4ecgx_registered(struct v4l2_subdev *sd)
669 {
670 int ret;
671 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
672
673 mutex_lock(&priv->lock);
674 ret = __s5k4ecgx_power_on(priv);
675 if (!ret) {
676 ret = s5k4ecgx_read_fw_ver(sd);
677 __s5k4ecgx_power_off(priv);
678 }
679 mutex_unlock(&priv->lock);
680
681 return ret;
682 }
683
684 /*
685 * V4L2 subdev internal operations
686 */
687 static int s5k4ecgx_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
688 {
689 struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(sd, fh->pad, 0);
690
691 mf->width = s5k4ecgx_prev_sizes[0].size.width;
692 mf->height = s5k4ecgx_prev_sizes[0].size.height;
693 mf->code = s5k4ecgx_formats[0].code;
694 mf->colorspace = V4L2_COLORSPACE_JPEG;
695 mf->field = V4L2_FIELD_NONE;
696
697 return 0;
698 }
699
700 static const struct v4l2_subdev_internal_ops s5k4ecgx_subdev_internal_ops = {
701 .registered = s5k4ecgx_registered,
702 .open = s5k4ecgx_open,
703 };
704
705 static int s5k4ecgx_s_power(struct v4l2_subdev *sd, int on)
706 {
707 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
708 int ret;
709
710 v4l2_dbg(1, debug, sd, "Switching %s\n", on ? "on" : "off");
711
712 if (on) {
713 ret = __s5k4ecgx_power_on(priv);
714 if (ret < 0)
715 return ret;
716 /* Time to stabilize sensor */
717 msleep(100);
718 ret = s5k4ecgx_init_sensor(sd);
719 if (ret < 0)
720 __s5k4ecgx_power_off(priv);
721 else
722 priv->set_params = 1;
723 } else {
724 ret = __s5k4ecgx_power_off(priv);
725 }
726
727 return ret;
728 }
729
730 static int s5k4ecgx_log_status(struct v4l2_subdev *sd)
731 {
732 v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name);
733
734 return 0;
735 }
736
737 static const struct v4l2_subdev_core_ops s5k4ecgx_core_ops = {
738 .s_power = s5k4ecgx_s_power,
739 .log_status = s5k4ecgx_log_status,
740 };
741
742 static int __s5k4ecgx_s_params(struct s5k4ecgx *priv)
743 {
744 struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
745 const struct v4l2_rect *crop_rect = &priv->curr_frmsize->input_window;
746 int ret;
747
748 ret = s5k4ecgx_set_input_window(client, crop_rect);
749 if (!ret)
750 ret = s5k4ecgx_set_zoom_window(client, crop_rect);
751 if (!ret)
752 ret = s5k4ecgx_write(client, REG_G_INPUTS_CHANGE_REQ, 1);
753 if (!ret)
754 ret = s5k4ecgx_write(client, 0x70000a1e, 0x28);
755 if (!ret)
756 ret = s5k4ecgx_write(client, 0x70000ad4, 0x3c);
757 if (!ret)
758 ret = s5k4ecgx_set_output_framefmt(priv);
759 if (!ret)
760 ret = s5k4ecgx_write(client, REG_P_PVI_MASK(0), 0x52);
761 if (!ret)
762 ret = s5k4ecgx_write(client, REG_P_FR_TIME_TYPE(0),
763 FR_TIME_DYNAMIC);
764 if (!ret)
765 ret = s5k4ecgx_write(client, REG_P_FR_TIME_Q_TYPE(0),
766 FR_TIME_Q_BEST_FRRATE);
767 if (!ret)
768 ret = s5k4ecgx_write(client, REG_P_MIN_FR_TIME(0),
769 US_TO_FR_TIME(33300));
770 if (!ret)
771 ret = s5k4ecgx_write(client, REG_P_MAX_FR_TIME(0),
772 US_TO_FR_TIME(66600));
773 if (!ret)
774 ret = s5k4ecgx_write(client, REG_P_PREV_MIRROR(0), 0);
775 if (!ret)
776 ret = s5k4ecgx_write(client, REG_P_CAP_MIRROR(0), 0);
777 if (!ret)
778 ret = s5k4ecgx_write(client, REG_G_ACTIVE_PREV_CFG, 0);
779 if (!ret)
780 ret = s5k4ecgx_write(client, REG_G_PREV_OPEN_AFTER_CH, 1);
781 if (!ret)
782 ret = s5k4ecgx_write(client, REG_G_NEW_CFG_SYNC, 1);
783 if (!ret)
784 ret = s5k4ecgx_write(client, REG_G_PREV_CFG_CHG, 1);
785
786 return ret;
787 }
788
789 static int __s5k4ecgx_s_stream(struct s5k4ecgx *priv, int on)
790 {
791 struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
792 int ret;
793
794 if (on && priv->set_params) {
795 ret = __s5k4ecgx_s_params(priv);
796 if (ret < 0)
797 return ret;
798 priv->set_params = 0;
799 }
800 /*
801 * This enables/disables preview stream only. Capture requests
802 * are not supported yet.
803 */
804 ret = s5k4ecgx_write(client, REG_G_ENABLE_PREV, on);
805 if (ret < 0)
806 return ret;
807 return s5k4ecgx_write(client, REG_G_ENABLE_PREV_CHG, 1);
808 }
809
810 static int s5k4ecgx_s_stream(struct v4l2_subdev *sd, int on)
811 {
812 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
813 int ret = 0;
814
815 v4l2_dbg(1, debug, sd, "Turn streaming %s\n", on ? "on" : "off");
816
817 mutex_lock(&priv->lock);
818
819 if (priv->streaming == !on) {
820 ret = __s5k4ecgx_s_stream(priv, on);
821 if (!ret)
822 priv->streaming = on & 1;
823 }
824
825 mutex_unlock(&priv->lock);
826 return ret;
827 }
828
829 static const struct v4l2_subdev_video_ops s5k4ecgx_video_ops = {
830 .s_stream = s5k4ecgx_s_stream,
831 };
832
833 static const struct v4l2_subdev_ops s5k4ecgx_ops = {
834 .core = &s5k4ecgx_core_ops,
835 .pad = &s5k4ecgx_pad_ops,
836 .video = &s5k4ecgx_video_ops,
837 };
838
839 /*
840 * GPIO setup
841 */
842 static int s5k4ecgx_config_gpio(int nr, int val, const char *name)
843 {
844 unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
845 int ret;
846
847 if (!gpio_is_valid(nr))
848 return 0;
849 ret = gpio_request_one(nr, flags, name);
850 if (!ret)
851 gpio_export(nr, 0);
852
853 return ret;
854 }
855
856 static void s5k4ecgx_free_gpios(struct s5k4ecgx *priv)
857 {
858 int i;
859
860 for (i = 0; i < ARRAY_SIZE(priv->gpio); i++) {
861 if (!gpio_is_valid(priv->gpio[i].gpio))
862 continue;
863 gpio_free(priv->gpio[i].gpio);
864 priv->gpio[i].gpio = -EINVAL;
865 }
866 }
867
868 static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv,
869 const struct s5k4ecgx_platform_data *pdata)
870 {
871 const struct s5k4ecgx_gpio *gpio = &pdata->gpio_stby;
872 int ret;
873
874 priv->gpio[STBY].gpio = -EINVAL;
875 priv->gpio[RST].gpio = -EINVAL;
876
877 ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_STBY");
878
879 if (ret) {
880 s5k4ecgx_free_gpios(priv);
881 return ret;
882 }
883 priv->gpio[STBY] = *gpio;
884 if (gpio_is_valid(gpio->gpio))
885 gpio_set_value(gpio->gpio, 0);
886
887 gpio = &pdata->gpio_reset;
888
889 ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_RST");
890 if (ret) {
891 s5k4ecgx_free_gpios(priv);
892 return ret;
893 }
894 priv->gpio[RST] = *gpio;
895 if (gpio_is_valid(gpio->gpio))
896 gpio_set_value(gpio->gpio, 0);
897
898 return 0;
899 }
900
901 static int s5k4ecgx_init_v4l2_ctrls(struct s5k4ecgx *priv)
902 {
903 const struct v4l2_ctrl_ops *ops = &s5k4ecgx_ctrl_ops;
904 struct v4l2_ctrl_handler *hdl = &priv->handler;
905 int ret;
906
907 ret = v4l2_ctrl_handler_init(hdl, 4);
908 if (ret)
909 return ret;
910
911 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -208, 127, 1, 0);
912 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0);
913 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0);
914
915 /* Sharpness default is 24612, and then (24612/SHARPNESS_DIV) = 2 */
916 v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -32704/SHARPNESS_DIV,
917 24612/SHARPNESS_DIV, 1, 2);
918 if (hdl->error) {
919 ret = hdl->error;
920 v4l2_ctrl_handler_free(hdl);
921 return ret;
922 }
923 priv->sd.ctrl_handler = hdl;
924
925 return 0;
926 };
927
928 static int s5k4ecgx_probe(struct i2c_client *client,
929 const struct i2c_device_id *id)
930 {
931 struct s5k4ecgx_platform_data *pdata = client->dev.platform_data;
932 struct v4l2_subdev *sd;
933 struct s5k4ecgx *priv;
934 int ret, i;
935
936 if (pdata == NULL) {
937 dev_err(&client->dev, "platform data is missing!\n");
938 return -EINVAL;
939 }
940
941 priv = devm_kzalloc(&client->dev, sizeof(struct s5k4ecgx), GFP_KERNEL);
942 if (!priv)
943 return -ENOMEM;
944
945 mutex_init(&priv->lock);
946 priv->streaming = 0;
947
948 sd = &priv->sd;
949 /* Registering subdev */
950 v4l2_i2c_subdev_init(sd, client, &s5k4ecgx_ops);
951 /* Static name; NEVER use in new drivers! */
952 strscpy(sd->name, S5K4ECGX_DRIVER_NAME, sizeof(sd->name));
953
954 sd->internal_ops = &s5k4ecgx_subdev_internal_ops;
955 /* Support v4l2 sub-device user space API */
956 sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
957
958 priv->pad.flags = MEDIA_PAD_FL_SOURCE;
959 sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
960 ret = media_entity_pads_init(&sd->entity, 1, &priv->pad);
961 if (ret)
962 return ret;
963
964 ret = s5k4ecgx_config_gpios(priv, pdata);
965 if (ret) {
966 dev_err(&client->dev, "Failed to set gpios\n");
967 goto out_err1;
968 }
969 for (i = 0; i < S5K4ECGX_NUM_SUPPLIES; i++)
970 priv->supplies[i].supply = s5k4ecgx_supply_names[i];
971
972 ret = devm_regulator_bulk_get(&client->dev, S5K4ECGX_NUM_SUPPLIES,
973 priv->supplies);
974 if (ret) {
975 dev_err(&client->dev, "Failed to get regulators\n");
976 goto out_err2;
977 }
978 ret = s5k4ecgx_init_v4l2_ctrls(priv);
979 if (ret)
980 goto out_err2;
981
982 priv->curr_pixfmt = &s5k4ecgx_formats[0];
983 priv->curr_frmsize = &s5k4ecgx_prev_sizes[0];
984
985 return 0;
986
987 out_err2:
988 s5k4ecgx_free_gpios(priv);
989 out_err1:
990 media_entity_cleanup(&priv->sd.entity);
991
992 return ret;
993 }
994
995 static int s5k4ecgx_remove(struct i2c_client *client)
996 {
997 struct v4l2_subdev *sd = i2c_get_clientdata(client);
998 struct s5k4ecgx *priv = to_s5k4ecgx(sd);
999
1000 mutex_destroy(&priv->lock);
1001 s5k4ecgx_free_gpios(priv);
1002 v4l2_device_unregister_subdev(sd);
1003 v4l2_ctrl_handler_free(&priv->handler);
1004 media_entity_cleanup(&sd->entity);
1005
1006 return 0;
1007 }
1008
1009 static const struct i2c_device_id s5k4ecgx_id[] = {
1010 { S5K4ECGX_DRIVER_NAME, 0 },
1011 {}
1012 };
1013 MODULE_DEVICE_TABLE(i2c, s5k4ecgx_id);
1014
1015 static struct i2c_driver v4l2_i2c_driver = {
1016 .driver = {
1017 .name = S5K4ECGX_DRIVER_NAME,
1018 },
1019 .probe = s5k4ecgx_probe,
1020 .remove = s5k4ecgx_remove,
1021 .id_table = s5k4ecgx_id,
1022 };
1023
1024 module_i2c_driver(v4l2_i2c_driver);
1025
1026 MODULE_DESCRIPTION("Samsung S5K4ECGX 5MP SOC camera");
1027 MODULE_AUTHOR("Sangwook Lee <sangwook.lee@linaro.org>");
1028 MODULE_AUTHOR("Seok-Young Jang <quartz.jang@samsung.com>");
1029 MODULE_LICENSE("GPL");
1030 MODULE_FIRMWARE(S5K4ECGX_FIRMWARE);
Linux with added FPC-III support