2 ivtv driver initialization and card probing
3 Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
4 Copyright (C) 2004 Chris Kennedy <c@groovy.org>
5 Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 /* Main Driver file for the ivtv project:
23 * Driver for the Conexant CX23415/CX23416 chip.
24 * Author: Kevin Thayer (nufan_wfk at yahoo.com)
28 * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
29 * and Takeru KOMORIYA<komoriya@paken.org>
31 * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
32 * using information provided by Jiun-Kuei Jung @ AVerMedia.
34 * Kurouto Sikou CX23416GYC-STVLP tested by K.Ohta <alpha292@bremen.or.jp>
35 * using information from T.Adachi,Takeru KOMORIYA and others :-)
37 * Nagase TRANSGEAR 5000TV, Aopen VA2000MAX-STN6 and I/O data GV-MVP/RX
38 * version by T.Adachi. Special thanks Mr.Suzuki
41 #include "ivtv-driver.h"
42 #include "ivtv-version.h"
43 #include "ivtv-fileops.h"
45 #include "ivtv-firmware.h"
46 #include "ivtv-queue.h"
47 #include "ivtv-udma.h"
49 #include "ivtv-mailbox.h"
50 #include "ivtv-streams.h"
51 #include "ivtv-ioctl.h"
52 #include "ivtv-cards.h"
54 #include "ivtv-routing.h"
55 #include "ivtv-controls.h"
56 #include "ivtv-gpio.h"
57 #include <linux/dma-mapping.h>
58 #include <media/tveeprom.h>
59 #include <media/i2c/saa7115.h>
60 #include "tuner-xc2028.h"
61 #include <uapi/linux/sched/types.h>
63 /* If you have already X v4l cards, then set this to X. This way
64 the device numbers stay matched. Example: you have a WinTV card
65 without radio and a PVR-350 with. Normally this would give a
66 video1 device together with a radio0 device for the PVR. By
67 setting this to 1 you ensure that radio0 is now also radio1. */
70 /* Callback for registering extensions */
71 int (*ivtv_ext_init
)(struct ivtv
*);
72 EXPORT_SYMBOL(ivtv_ext_init
);
74 /* add your revision and whatnot here */
75 static const struct pci_device_id ivtv_pci_tbl
[] = {
76 {PCI_VENDOR_ID_ICOMP
, PCI_DEVICE_ID_IVTV15
,
77 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
78 {PCI_VENDOR_ID_ICOMP
, PCI_DEVICE_ID_IVTV16
,
79 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
83 MODULE_DEVICE_TABLE(pci
,ivtv_pci_tbl
);
85 /* ivtv instance counter */
86 static atomic_t ivtv_instance
= ATOMIC_INIT(0);
88 /* Parameter declarations */
89 static int cardtype
[IVTV_MAX_CARDS
];
90 static int tuner
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
91 -1, -1, -1, -1, -1, -1, -1, -1,
92 -1, -1, -1, -1, -1, -1, -1, -1,
93 -1, -1, -1, -1, -1, -1, -1, -1 };
94 static int radio
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
95 -1, -1, -1, -1, -1, -1, -1, -1,
96 -1, -1, -1, -1, -1, -1, -1, -1,
97 -1, -1, -1, -1, -1, -1, -1, -1 };
98 static int i2c_clock_period
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
99 -1, -1, -1, -1, -1, -1, -1, -1,
100 -1, -1, -1, -1, -1, -1, -1, -1,
101 -1, -1, -1, -1, -1, -1, -1, -1 };
103 static unsigned int cardtype_c
= 1;
104 static unsigned int tuner_c
= 1;
105 static int radio_c
= 1;
106 static unsigned int i2c_clock_period_c
= 1;
107 static char pal
[] = "---";
108 static char secam
[] = "--";
109 static char ntsc
[] = "-";
113 /* DMA Buffers, Default size in MB allocated */
114 #define IVTV_DEFAULT_ENC_MPG_BUFFERS 4
115 #define IVTV_DEFAULT_ENC_YUV_BUFFERS 2
116 #define IVTV_DEFAULT_ENC_VBI_BUFFERS 1
117 /* Exception: size in kB for this stream (MB is overkill) */
118 #define IVTV_DEFAULT_ENC_PCM_BUFFERS 320
119 #define IVTV_DEFAULT_DEC_MPG_BUFFERS 1
120 #define IVTV_DEFAULT_DEC_YUV_BUFFERS 1
121 /* Exception: size in kB for this stream (MB is way overkill) */
122 #define IVTV_DEFAULT_DEC_VBI_BUFFERS 64
124 static int enc_mpg_buffers
= IVTV_DEFAULT_ENC_MPG_BUFFERS
;
125 static int enc_yuv_buffers
= IVTV_DEFAULT_ENC_YUV_BUFFERS
;
126 static int enc_vbi_buffers
= IVTV_DEFAULT_ENC_VBI_BUFFERS
;
127 static int enc_pcm_buffers
= IVTV_DEFAULT_ENC_PCM_BUFFERS
;
128 static int dec_mpg_buffers
= IVTV_DEFAULT_DEC_MPG_BUFFERS
;
129 static int dec_yuv_buffers
= IVTV_DEFAULT_DEC_YUV_BUFFERS
;
130 static int dec_vbi_buffers
= IVTV_DEFAULT_DEC_VBI_BUFFERS
;
132 static int ivtv_yuv_mode
;
133 static int ivtv_yuv_threshold
= -1;
134 static int ivtv_pci_latency
= 1;
137 #ifdef CONFIG_VIDEO_ADV_DEBUG
141 static int tunertype
= -1;
142 static int newi2c
= -1;
144 module_param_array(tuner
, int, &tuner_c
, 0644);
145 module_param_array(radio
, int, &radio_c
, 0644);
146 module_param_array(cardtype
, int, &cardtype_c
, 0644);
147 module_param_string(pal
, pal
, sizeof(pal
), 0644);
148 module_param_string(secam
, secam
, sizeof(secam
), 0644);
149 module_param_string(ntsc
, ntsc
, sizeof(ntsc
), 0644);
150 module_param_named(debug
,ivtv_debug
, int, 0644);
151 #ifdef CONFIG_VIDEO_ADV_DEBUG
152 module_param_named(fw_debug
, ivtv_fw_debug
, int, 0644);
154 module_param(ivtv_pci_latency
, int, 0644);
155 module_param(ivtv_yuv_mode
, int, 0644);
156 module_param(ivtv_yuv_threshold
, int, 0644);
157 module_param(ivtv_first_minor
, int, 0644);
159 module_param(enc_mpg_buffers
, int, 0644);
160 module_param(enc_yuv_buffers
, int, 0644);
161 module_param(enc_vbi_buffers
, int, 0644);
162 module_param(enc_pcm_buffers
, int, 0644);
163 module_param(dec_mpg_buffers
, int, 0644);
164 module_param(dec_yuv_buffers
, int, 0644);
165 module_param(dec_vbi_buffers
, int, 0644);
167 module_param(tunertype
, int, 0644);
168 module_param(newi2c
, int, 0644);
169 module_param_array(i2c_clock_period
, int, &i2c_clock_period_c
, 0644);
171 MODULE_PARM_DESC(tuner
, "Tuner type selection,\n"
172 "\t\t\tsee tuner.h for values");
173 MODULE_PARM_DESC(radio
,
174 "Enable or disable the radio. Use only if autodetection\n"
175 "\t\t\tfails. 0 = disable, 1 = enable");
176 MODULE_PARM_DESC(cardtype
,
177 "Only use this option if your card is not detected properly.\n"
178 "\t\tSpecify card type:\n"
179 "\t\t\t 1 = WinTV PVR 250\n"
180 "\t\t\t 2 = WinTV PVR 350\n"
181 "\t\t\t 3 = WinTV PVR-150 or PVR-500\n"
182 "\t\t\t 4 = AVerMedia M179\n"
183 "\t\t\t 5 = YUAN MPG600/Kuroutoshikou iTVC16-STVLP\n"
184 "\t\t\t 6 = YUAN MPG160/Kuroutoshikou iTVC15-STVLP\n"
185 "\t\t\t 7 = YUAN PG600/DIAMONDMM PVR-550 (CX Falcon 2)\n"
186 "\t\t\t 8 = Adaptec AVC-2410\n"
187 "\t\t\t 9 = Adaptec AVC-2010\n"
188 "\t\t\t10 = NAGASE TRANSGEAR 5000TV\n"
189 "\t\t\t11 = AOpen VA2000MAX-STN6\n"
190 "\t\t\t12 = YUAN MPG600GR/Kuroutoshikou CX23416GYC-STVLP\n"
191 "\t\t\t13 = I/O Data GV-MVP/RX\n"
192 "\t\t\t14 = I/O Data GV-MVP/RX2E\n"
193 "\t\t\t15 = GOTVIEW PCI DVD\n"
194 "\t\t\t16 = GOTVIEW PCI DVD2 Deluxe\n"
195 "\t\t\t17 = Yuan MPC622\n"
196 "\t\t\t18 = Digital Cowboy DCT-MTVP1\n"
197 "\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite\n"
198 "\t\t\t20 = Club3D ZAP-TV1x01\n"
199 "\t\t\t21 = AverTV MCE 116 Plus\n"
200 "\t\t\t22 = ASUS Falcon2\n"
201 "\t\t\t23 = AverMedia PVR-150 Plus\n"
202 "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n"
203 "\t\t\t25 = AverMedia M104 (not yet working)\n"
204 "\t\t\t26 = Buffalo PC-MV5L/PCI\n"
205 "\t\t\t27 = AVerMedia UltraTV 1500 MCE\n"
206 "\t\t\t28 = Sony VAIO Giga Pocket (ENX Kikyou)\n"
207 "\t\t\t 0 = Autodetect (default)\n"
208 "\t\t\t-1 = Ignore this card\n\t\t");
209 MODULE_PARM_DESC(pal
, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");
210 MODULE_PARM_DESC(secam
, "Set SECAM standard: BGH, DK, L, LC");
211 MODULE_PARM_DESC(ntsc
, "Set NTSC standard: M, J (Japan), K (South Korea)");
212 MODULE_PARM_DESC(tunertype
,
213 "Specify tuner type:\n"
214 "\t\t\t 0 = tuner for PAL-B/G/H/D/K/I, SECAM-B/G/H/D/K/L/Lc\n"
215 "\t\t\t 1 = tuner for NTSC-M/J/K, PAL-M/N/Nc\n"
216 "\t\t\t-1 = Autodetect (default)\n");
217 MODULE_PARM_DESC(debug
,
218 "Debug level (bitmask). Default: 0\n"
219 "\t\t\t 1/0x0001: warning\n"
220 "\t\t\t 2/0x0002: info\n"
221 "\t\t\t 4/0x0004: mailbox\n"
222 "\t\t\t 8/0x0008: ioctl\n"
223 "\t\t\t 16/0x0010: file\n"
224 "\t\t\t 32/0x0020: dma\n"
225 "\t\t\t 64/0x0040: irq\n"
226 "\t\t\t 128/0x0080: decoder\n"
227 "\t\t\t 256/0x0100: yuv\n"
228 "\t\t\t 512/0x0200: i2c\n"
229 "\t\t\t1024/0x0400: high volume\n");
230 #ifdef CONFIG_VIDEO_ADV_DEBUG
231 MODULE_PARM_DESC(fw_debug
,
232 "Enable code for debugging firmware problems. Default: 0\n");
234 MODULE_PARM_DESC(ivtv_pci_latency
,
235 "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
236 "\t\t\tDefault: Yes");
237 MODULE_PARM_DESC(ivtv_yuv_mode
,
238 "Specify the yuv playback mode:\n"
239 "\t\t\t0 = interlaced\n\t\t\t1 = progressive\n\t\t\t2 = auto\n"
240 "\t\t\tDefault: 0 (interlaced)");
241 MODULE_PARM_DESC(ivtv_yuv_threshold
,
242 "If ivtv_yuv_mode is 2 (auto) then playback content as\n\t\tprogressive if src height <= ivtv_yuvthreshold\n"
243 "\t\t\tDefault: 480");
244 MODULE_PARM_DESC(enc_mpg_buffers
,
245 "Encoder MPG Buffers (in MB)\n"
246 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_MPG_BUFFERS
));
247 MODULE_PARM_DESC(enc_yuv_buffers
,
248 "Encoder YUV Buffers (in MB)\n"
249 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_YUV_BUFFERS
));
250 MODULE_PARM_DESC(enc_vbi_buffers
,
251 "Encoder VBI Buffers (in MB)\n"
252 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_VBI_BUFFERS
));
253 MODULE_PARM_DESC(enc_pcm_buffers
,
254 "Encoder PCM buffers (in kB)\n"
255 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_PCM_BUFFERS
));
256 MODULE_PARM_DESC(dec_mpg_buffers
,
257 "Decoder MPG buffers (in MB)\n"
258 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_MPG_BUFFERS
));
259 MODULE_PARM_DESC(dec_yuv_buffers
,
260 "Decoder YUV buffers (in MB)\n"
261 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_YUV_BUFFERS
));
262 MODULE_PARM_DESC(dec_vbi_buffers
,
263 "Decoder VBI buffers (in kB)\n"
264 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_VBI_BUFFERS
));
265 MODULE_PARM_DESC(newi2c
,
266 "Use new I2C implementation\n"
267 "\t\t\t-1 is autodetect, 0 is off, 1 is on\n"
268 "\t\t\tDefault is autodetect");
269 MODULE_PARM_DESC(i2c_clock_period
,
270 "Period of SCL for the I2C bus controlled by the CX23415/6\n"
271 "\t\t\tMin: 10 usec (100 kHz), Max: 4500 usec (222 Hz)\n"
272 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_I2C_CLOCK_PERIOD
));
274 MODULE_PARM_DESC(ivtv_first_minor
, "Set device node number assigned to first card");
276 MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
277 MODULE_DESCRIPTION("CX23415/CX23416 driver");
278 MODULE_SUPPORTED_DEVICE
279 ("CX23415/CX23416 MPEG2 encoder (WinTV PVR-150/250/350/500,\n"
280 "\t\t\tYuan MPG series and similar)");
281 MODULE_LICENSE("GPL");
283 MODULE_VERSION(IVTV_VERSION
);
285 #if defined(CONFIG_MODULES) && defined(MODULE)
286 static void request_module_async(struct work_struct
*work
)
288 struct ivtv
*dev
= container_of(work
, struct ivtv
, request_module_wk
);
290 /* Make sure ivtv-alsa module is loaded */
291 request_module("ivtv-alsa");
293 /* Initialize ivtv-alsa for this instance of the cx18 device */
294 if (ivtv_ext_init
!= NULL
)
298 static void request_modules(struct ivtv
*dev
)
300 INIT_WORK(&dev
->request_module_wk
, request_module_async
);
301 schedule_work(&dev
->request_module_wk
);
304 static void flush_request_modules(struct ivtv
*dev
)
306 flush_work(&dev
->request_module_wk
);
309 #define request_modules(dev)
310 #define flush_request_modules(dev)
311 #endif /* CONFIG_MODULES */
313 void ivtv_clear_irq_mask(struct ivtv
*itv
, u32 mask
)
315 itv
->irqmask
&= ~mask
;
316 write_reg_sync(itv
->irqmask
, IVTV_REG_IRQMASK
);
319 void ivtv_set_irq_mask(struct ivtv
*itv
, u32 mask
)
321 itv
->irqmask
|= mask
;
322 write_reg_sync(itv
->irqmask
, IVTV_REG_IRQMASK
);
325 int ivtv_set_output_mode(struct ivtv
*itv
, int mode
)
329 spin_lock(&itv
->lock
);
330 old_mode
= itv
->output_mode
;
332 itv
->output_mode
= old_mode
= mode
;
333 spin_unlock(&itv
->lock
);
337 struct ivtv_stream
*ivtv_get_output_stream(struct ivtv
*itv
)
339 switch (itv
->output_mode
) {
341 return &itv
->streams
[IVTV_DEC_STREAM_TYPE_MPG
];
343 return &itv
->streams
[IVTV_DEC_STREAM_TYPE_YUV
];
349 int ivtv_waitq(wait_queue_head_t
*waitq
)
353 prepare_to_wait(waitq
, &wait
, TASK_INTERRUPTIBLE
);
355 finish_wait(waitq
, &wait
);
356 return signal_pending(current
) ? -EINTR
: 0;
359 /* Generic utility functions */
360 int ivtv_msleep_timeout(unsigned int msecs
, int intr
)
362 int timeout
= msecs_to_jiffies(msecs
);
365 set_current_state(intr
? TASK_INTERRUPTIBLE
: TASK_UNINTERRUPTIBLE
);
366 timeout
= schedule_timeout(timeout
);
368 int ret
= signal_pending(current
);
377 /* Release ioremapped memory */
378 static void ivtv_iounmap(struct ivtv
*itv
)
383 /* Release registers memory */
384 if (itv
->reg_mem
!= NULL
) {
385 IVTV_DEBUG_INFO("releasing reg_mem\n");
386 iounmap(itv
->reg_mem
);
389 /* Release io memory */
390 if (itv
->has_cx23415
&& itv
->dec_mem
!= NULL
) {
391 IVTV_DEBUG_INFO("releasing dec_mem\n");
392 iounmap(itv
->dec_mem
);
396 /* Release io memory */
397 if (itv
->enc_mem
!= NULL
) {
398 IVTV_DEBUG_INFO("releasing enc_mem\n");
399 iounmap(itv
->enc_mem
);
404 /* Hauppauge card? get values from tveeprom */
405 void ivtv_read_eeprom(struct ivtv
*itv
, struct tveeprom
*tv
)
409 itv
->i2c_client
.addr
= 0xA0 >> 1;
410 tveeprom_read(&itv
->i2c_client
, eedata
, sizeof(eedata
));
411 tveeprom_hauppauge_analog(tv
, eedata
);
414 static void ivtv_process_eeprom(struct ivtv
*itv
)
417 int pci_slot
= PCI_SLOT(itv
->pdev
->devfn
);
419 ivtv_read_eeprom(itv
, &tv
);
421 /* Many thanks to Steven Toth from Hauppauge for providing the
424 /* In a few cases the PCI subsystem IDs do not correctly
425 identify the card. A better method is to check the
426 model number from the eeprom instead. */
427 case 30012 ... 30039: /* Low profile PVR250 */
428 case 32000 ... 32999:
429 case 48000 ... 48099: /* 48??? range are PVR250s with a cx23415 */
430 case 48400 ... 48599:
431 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_250
);
433 case 48100 ... 48399:
434 case 48600 ... 48999:
435 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_350
);
437 case 23000 ... 23999: /* PVR500 */
438 case 25000 ... 25999: /* Low profile PVR150 */
439 case 26000 ... 26999: /* Regular PVR150 */
440 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
443 IVTV_ERR("Invalid EEPROM\n");
446 IVTV_ERR("Unknown model %d, defaulting to PVR-150\n", tv
.model
);
447 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
452 /* Old style PVR350 (with an saa7114) uses this input for
455 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_350_V1
);
461 itv
->v4l2_cap
= itv
->card
->v4l2_capabilities
;
462 itv
->card_name
= itv
->card
->name
;
463 itv
->card_i2c
= itv
->card
->i2c
;
465 /* If this is a PVR500 then it should be possible to detect whether it is the
466 first or second unit by looking at the subsystem device ID: is bit 4 is
467 set, then it is the second unit (according to info from Hauppauge).
469 However, while this works for most cards, I have seen a few PVR500 cards
470 where both units have the same subsystem ID.
472 So instead I look at the reported 'PCI slot' (which is the slot on the PVR500
473 PCI bridge) and if it is 8, then it is assumed to be the first unit, otherwise
474 it is the second unit. It is possible that it is a different slot when ivtv is
475 used in Xen, in that case I ignore this card here. The worst that can happen
476 is that the card presents itself with a non-working radio device.
478 This detection is needed since the eeprom reports incorrectly that a radio is
479 present on the second unit. */
480 if (tv
.model
/ 1000 == 23) {
481 static const struct ivtv_card_tuner_i2c ivtv_i2c_radio
= {
482 .radio
= { 0x60, I2C_CLIENT_END
},
483 .demod
= { 0x43, I2C_CLIENT_END
},
484 .tv
= { 0x61, I2C_CLIENT_END
},
487 itv
->card_name
= "WinTV PVR 500";
488 itv
->card_i2c
= &ivtv_i2c_radio
;
489 if (pci_slot
== 8 || pci_slot
== 9) {
490 int is_first
= (pci_slot
& 1) == 0;
492 itv
->card_name
= is_first
? "WinTV PVR 500 (unit #1)" :
493 "WinTV PVR 500 (unit #2)";
495 IVTV_INFO("Correcting tveeprom data: no radio present on second unit\n");
500 IVTV_INFO("Autodetected %s\n", itv
->card_name
);
502 switch (tv
.tuner_hauppauge_model
) {
506 itv
->pvr150_workaround
= 1;
511 if (tv
.tuner_type
== TUNER_ABSENT
)
512 IVTV_ERR("tveeprom cannot autodetect tuner!\n");
514 if (itv
->options
.tuner
== -1)
515 itv
->options
.tuner
= tv
.tuner_type
;
516 if (itv
->options
.radio
== -1)
517 itv
->options
.radio
= (tv
.has_radio
!= 0);
518 /* only enable newi2c if an IR blaster is present */
519 if (itv
->options
.newi2c
== -1 && tv
.has_ir
) {
520 itv
->options
.newi2c
= (tv
.has_ir
& 4) ? 1 : 0;
521 if (itv
->options
.newi2c
) {
522 IVTV_INFO("Reopen i2c bus for IR-blaster support\n");
529 /* user specified tuner standard */
532 /* autodetect tuner standard */
533 if (tv
.tuner_formats
& V4L2_STD_PAL
) {
534 IVTV_DEBUG_INFO("PAL tuner detected\n");
535 itv
->std
|= V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
536 } else if (tv
.tuner_formats
& V4L2_STD_NTSC
) {
537 IVTV_DEBUG_INFO("NTSC tuner detected\n");
538 itv
->std
|= V4L2_STD_NTSC_M
;
539 } else if (tv
.tuner_formats
& V4L2_STD_SECAM
) {
540 IVTV_DEBUG_INFO("SECAM tuner detected\n");
541 itv
->std
|= V4L2_STD_SECAM_L
;
543 IVTV_INFO("No tuner detected, default to NTSC-M\n");
544 itv
->std
|= V4L2_STD_NTSC_M
;
548 static v4l2_std_id
ivtv_parse_std(struct ivtv
*itv
)
553 return V4L2_STD_PAL_60
;
561 return V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
565 if (pal
[1] == 'c' || pal
[1] == 'C')
566 return V4L2_STD_PAL_Nc
;
567 return V4L2_STD_PAL_N
;
571 return V4L2_STD_PAL_I
;
577 return V4L2_STD_PAL_DK
;
581 return V4L2_STD_PAL_M
;
585 IVTV_WARN("pal= argument not recognised\n");
597 return V4L2_STD_SECAM_B
| V4L2_STD_SECAM_G
| V4L2_STD_SECAM_H
;
603 return V4L2_STD_SECAM_DK
;
607 if (secam
[1] == 'C' || secam
[1] == 'c')
608 return V4L2_STD_SECAM_LC
;
609 return V4L2_STD_SECAM_L
;
613 IVTV_WARN("secam= argument not recognised\n");
621 return V4L2_STD_NTSC_M
;
625 return V4L2_STD_NTSC_M_JP
;
629 return V4L2_STD_NTSC_M_KR
;
633 IVTV_WARN("ntsc= argument not recognised\n");
641 static void ivtv_process_options(struct ivtv
*itv
)
643 const char *chipname
;
646 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_MPG
] = enc_mpg_buffers
* 1024;
647 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_YUV
] = enc_yuv_buffers
* 1024;
648 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_VBI
] = enc_vbi_buffers
* 1024;
649 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_PCM
] = enc_pcm_buffers
;
650 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_MPG
] = dec_mpg_buffers
* 1024;
651 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_YUV
] = dec_yuv_buffers
* 1024;
652 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_VBI
] = dec_vbi_buffers
;
653 itv
->options
.cardtype
= cardtype
[itv
->instance
];
654 itv
->options
.tuner
= tuner
[itv
->instance
];
655 itv
->options
.radio
= radio
[itv
->instance
];
657 itv
->options
.i2c_clock_period
= i2c_clock_period
[itv
->instance
];
658 if (itv
->options
.i2c_clock_period
== -1)
659 itv
->options
.i2c_clock_period
= IVTV_DEFAULT_I2C_CLOCK_PERIOD
;
660 else if (itv
->options
.i2c_clock_period
< 10)
661 itv
->options
.i2c_clock_period
= 10;
662 else if (itv
->options
.i2c_clock_period
> 4500)
663 itv
->options
.i2c_clock_period
= 4500;
665 itv
->options
.newi2c
= newi2c
;
666 if (tunertype
< -1 || tunertype
> 1) {
667 IVTV_WARN("Invalid tunertype argument, will autodetect instead\n");
670 itv
->std
= ivtv_parse_std(itv
);
671 if (itv
->std
== 0 && tunertype
>= 0)
672 itv
->std
= tunertype
? V4L2_STD_MN
: (V4L2_STD_ALL
& ~V4L2_STD_MN
);
673 itv
->has_cx23415
= (itv
->pdev
->device
== PCI_DEVICE_ID_IVTV15
);
674 chipname
= itv
->has_cx23415
? "cx23415" : "cx23416";
675 if (itv
->options
.cardtype
== -1) {
676 IVTV_INFO("Ignore card (detected %s based chip)\n", chipname
);
679 if ((itv
->card
= ivtv_get_card(itv
->options
.cardtype
- 1))) {
680 IVTV_INFO("User specified %s card (detected %s based chip)\n",
681 itv
->card
->name
, chipname
);
682 } else if (itv
->options
.cardtype
!= 0) {
683 IVTV_ERR("Unknown user specified type, trying to autodetect card\n");
685 if (itv
->card
== NULL
) {
686 if (itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE
||
687 itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE_ALT1
||
688 itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE_ALT2
) {
689 itv
->card
= ivtv_get_card(itv
->has_cx23415
? IVTV_CARD_PVR_350
: IVTV_CARD_PVR_150
);
690 IVTV_INFO("Autodetected Hauppauge card (%s based)\n",
694 if (itv
->card
== NULL
) {
695 for (i
= 0; (itv
->card
= ivtv_get_card(i
)); i
++) {
696 if (itv
->card
->pci_list
== NULL
)
698 for (j
= 0; itv
->card
->pci_list
[j
].device
; j
++) {
699 if (itv
->pdev
->device
!=
700 itv
->card
->pci_list
[j
].device
)
702 if (itv
->pdev
->subsystem_vendor
!=
703 itv
->card
->pci_list
[j
].subsystem_vendor
)
705 if (itv
->pdev
->subsystem_device
!=
706 itv
->card
->pci_list
[j
].subsystem_device
)
708 IVTV_INFO("Autodetected %s card (%s based)\n",
709 itv
->card
->name
, chipname
);
716 if (itv
->card
== NULL
) {
717 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
718 IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n",
719 itv
->pdev
->vendor
, itv
->pdev
->device
);
720 IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n",
721 itv
->pdev
->subsystem_vendor
, itv
->pdev
->subsystem_device
);
722 IVTV_ERR(" %s based\n", chipname
);
723 IVTV_ERR("Defaulting to %s card\n", itv
->card
->name
);
724 IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
725 IVTV_ERR("card you have to the linux-media mailinglist (www.linuxtv.org)\n");
726 IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
728 itv
->v4l2_cap
= itv
->card
->v4l2_capabilities
;
729 itv
->card_name
= itv
->card
->name
;
730 itv
->card_i2c
= itv
->card
->i2c
;
733 /* Precondition: the ivtv structure has been memset to 0. Only
734 the dev and num fields have been filled in.
735 No assumptions on the card type may be made here (see ivtv_init_struct2
738 static int ivtv_init_struct1(struct ivtv
*itv
)
740 struct sched_param param
= { .sched_priority
= 99 };
742 itv
->base_addr
= pci_resource_start(itv
->pdev
, 0);
743 itv
->enc_mbox
.max_mbox
= 2; /* the encoder has 3 mailboxes (0-2) */
744 itv
->dec_mbox
.max_mbox
= 1; /* the decoder has 2 mailboxes (0-1) */
746 mutex_init(&itv
->serialize_lock
);
747 mutex_init(&itv
->i2c_bus_lock
);
748 mutex_init(&itv
->udma
.lock
);
750 spin_lock_init(&itv
->lock
);
751 spin_lock_init(&itv
->dma_reg_lock
);
753 kthread_init_worker(&itv
->irq_worker
);
754 itv
->irq_worker_task
= kthread_run(kthread_worker_fn
, &itv
->irq_worker
,
755 "%s", itv
->v4l2_dev
.name
);
756 if (IS_ERR(itv
->irq_worker_task
)) {
757 IVTV_ERR("Could not create ivtv task\n");
760 /* must use the FIFO scheduler as it is realtime sensitive */
761 sched_setscheduler(itv
->irq_worker_task
, SCHED_FIFO
, ¶m
);
763 kthread_init_work(&itv
->irq_work
, ivtv_irq_work_handler
);
765 /* Initial settings */
766 itv
->cxhdl
.port
= CX2341X_PORT_MEMORY
;
767 itv
->cxhdl
.capabilities
= CX2341X_CAP_HAS_SLICED_VBI
;
768 init_waitqueue_head(&itv
->eos_waitq
);
769 init_waitqueue_head(&itv
->event_waitq
);
770 init_waitqueue_head(&itv
->vsync_waitq
);
771 init_waitqueue_head(&itv
->dma_waitq
);
772 timer_setup(&itv
->dma_timer
, ivtv_unfinished_dma
, 0);
774 itv
->cur_dma_stream
= -1;
775 itv
->cur_pio_stream
= -1;
781 itv
->vbi
.in
.type
= V4L2_BUF_TYPE_VBI_CAPTURE
;
782 itv
->vbi
.sliced_in
= &itv
->vbi
.in
.fmt
.sliced
;
784 /* Init the sg table for osd/yuv output */
785 sg_init_table(itv
->udma
.SGlist
, IVTV_DMA_SG_OSD_ENT
);
788 itv
->osd_global_alpha_state
= 1;
789 itv
->osd_global_alpha
= 255;
792 atomic_set(&itv
->yuv_info
.next_dma_frame
, -1);
793 itv
->yuv_info
.lace_mode
= ivtv_yuv_mode
;
794 itv
->yuv_info
.lace_threshold
= ivtv_yuv_threshold
;
795 itv
->yuv_info
.max_frames_buffered
= 3;
796 itv
->yuv_info
.track_osd
= 1;
800 /* Second initialization part. Here the card type has been
802 static void ivtv_init_struct2(struct ivtv
*itv
)
806 for (i
= 0; i
< IVTV_CARD_MAX_VIDEO_INPUTS
; i
++)
807 if (itv
->card
->video_inputs
[i
].video_type
== 0)
810 for (i
= 0; i
< IVTV_CARD_MAX_AUDIO_INPUTS
; i
++)
811 if (itv
->card
->audio_inputs
[i
].audio_type
== 0)
813 itv
->nof_audio_inputs
= i
;
815 if (itv
->card
->hw_all
& IVTV_HW_CX25840
) {
816 itv
->vbi
.sliced_size
= 288; /* multiple of 16, real size = 284 */
818 itv
->vbi
.sliced_size
= 64; /* multiple of 16, real size = 52 */
821 /* Find tuner input */
822 for (i
= 0; i
< itv
->nof_inputs
; i
++) {
823 if (itv
->card
->video_inputs
[i
].video_type
==
824 IVTV_CARD_INPUT_VID_TUNER
)
827 if (i
>= itv
->nof_inputs
)
829 itv
->active_input
= i
;
830 itv
->audio_input
= itv
->card
->video_inputs
[i
].audio_index
;
833 static int ivtv_setup_pci(struct ivtv
*itv
, struct pci_dev
*pdev
,
834 const struct pci_device_id
*pci_id
)
837 unsigned char pci_latency
;
839 IVTV_DEBUG_INFO("Enabling pci device\n");
841 if (pci_enable_device(pdev
)) {
842 IVTV_ERR("Can't enable device!\n");
845 if (pci_set_dma_mask(pdev
, DMA_BIT_MASK(32))) {
846 IVTV_ERR("No suitable DMA available.\n");
849 if (!request_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
, "ivtv encoder")) {
850 IVTV_ERR("Cannot request encoder memory region.\n");
854 if (!request_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
,
855 IVTV_REG_SIZE
, "ivtv registers")) {
856 IVTV_ERR("Cannot request register memory region.\n");
857 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
861 if (itv
->has_cx23415
&&
862 !request_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
,
863 IVTV_DECODER_SIZE
, "ivtv decoder")) {
864 IVTV_ERR("Cannot request decoder memory region.\n");
865 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
866 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
870 /* Check for bus mastering */
871 pci_read_config_word(pdev
, PCI_COMMAND
, &cmd
);
872 if (!(cmd
& PCI_COMMAND_MASTER
)) {
873 IVTV_DEBUG_INFO("Attempting to enable Bus Mastering\n");
874 pci_set_master(pdev
);
875 pci_read_config_word(pdev
, PCI_COMMAND
, &cmd
);
876 if (!(cmd
& PCI_COMMAND_MASTER
)) {
877 IVTV_ERR("Bus Mastering is not enabled\n");
881 IVTV_DEBUG_INFO("Bus Mastering Enabled.\n");
883 pci_read_config_byte(pdev
, PCI_LATENCY_TIMER
, &pci_latency
);
885 if (pci_latency
< 64 && ivtv_pci_latency
) {
886 IVTV_INFO("Unreasonably low latency timer, setting to 64 (was %d)\n",
888 pci_write_config_byte(pdev
, PCI_LATENCY_TIMER
, 64);
889 pci_read_config_byte(pdev
, PCI_LATENCY_TIMER
, &pci_latency
);
891 /* This config space value relates to DMA latencies. The
892 default value 0x8080 is too low however and will lead
893 to DMA errors. 0xffff is the max value which solves
895 pci_write_config_dword(pdev
, 0x40, 0xffff);
897 IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, irq: %d, latency: %d, memory: 0x%llx\n",
898 pdev
->device
, pdev
->revision
, pdev
->bus
->number
,
899 PCI_SLOT(pdev
->devfn
), PCI_FUNC(pdev
->devfn
),
900 pdev
->irq
, pci_latency
, (u64
)itv
->base_addr
);
905 static void ivtv_load_and_init_modules(struct ivtv
*itv
)
907 u32 hw
= itv
->card
->hw_all
;
910 /* check which i2c devices are actually found */
911 for (i
= 0; i
< 32; i
++) {
916 if (device
== IVTV_HW_GPIO
|| device
== IVTV_HW_TVEEPROM
) {
917 /* GPIO and TVEEPROM do not use i2c probing */
918 itv
->hw_flags
|= device
;
921 if (ivtv_i2c_register(itv
, i
) == 0)
922 itv
->hw_flags
|= device
;
925 /* probe for legacy IR controllers that aren't in card definitions */
926 if ((itv
->hw_flags
& IVTV_HW_IR_ANY
) == 0)
927 ivtv_i2c_new_ir_legacy(itv
);
929 if (itv
->card
->hw_all
& IVTV_HW_CX25840
)
930 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_CX25840
);
931 else if (itv
->card
->hw_all
& IVTV_HW_SAA717X
)
932 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA717X
);
933 else if (itv
->card
->hw_all
& IVTV_HW_SAA7114
)
934 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA7114
);
936 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA7115
);
937 itv
->sd_audio
= ivtv_find_hw(itv
, itv
->card
->hw_audio_ctrl
);
938 itv
->sd_muxer
= ivtv_find_hw(itv
, itv
->card
->hw_muxer
);
942 if (itv
->card
->type
== IVTV_CARD_CX23416GYC
) {
943 /* Several variations of this card exist, detect which card
944 type should be used. */
945 if ((hw
& (IVTV_HW_UPD64031A
| IVTV_HW_UPD6408X
)) == 0)
946 itv
->card
= ivtv_get_card(IVTV_CARD_CX23416GYC_NOGRYCS
);
947 else if ((hw
& IVTV_HW_UPD64031A
) == 0)
948 itv
->card
= ivtv_get_card(IVTV_CARD_CX23416GYC_NOGR
);
950 else if (itv
->card
->type
== IVTV_CARD_GV_MVPRX
||
951 itv
->card
->type
== IVTV_CARD_GV_MVPRX2E
) {
952 /* The crystal frequency of GVMVPRX is 24.576MHz */
953 v4l2_subdev_call(itv
->sd_video
, video
, s_crystal_freq
,
954 SAA7115_FREQ_24_576_MHZ
, SAA7115_FREQ_FL_UCGC
);
957 if (hw
& IVTV_HW_CX25840
) {
958 itv
->vbi
.raw_decoder_line_size
= 1444;
959 itv
->vbi
.raw_decoder_sav_odd_field
= 0x20;
960 itv
->vbi
.raw_decoder_sav_even_field
= 0x60;
961 itv
->vbi
.sliced_decoder_line_size
= 272;
962 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xB0;
963 itv
->vbi
.sliced_decoder_sav_even_field
= 0xF0;
966 if (hw
& IVTV_HW_SAA711X
) {
967 /* determine the exact saa711x model */
968 itv
->hw_flags
&= ~IVTV_HW_SAA711X
;
970 if (strstr(itv
->sd_video
->name
, "saa7114")) {
971 itv
->hw_flags
|= IVTV_HW_SAA7114
;
972 /* VBI is not yet supported by the saa7114 driver. */
973 itv
->v4l2_cap
&= ~(V4L2_CAP_SLICED_VBI_CAPTURE
|V4L2_CAP_VBI_CAPTURE
);
975 itv
->hw_flags
|= IVTV_HW_SAA7115
;
977 itv
->vbi
.raw_decoder_line_size
= 1443;
978 itv
->vbi
.raw_decoder_sav_odd_field
= 0x25;
979 itv
->vbi
.raw_decoder_sav_even_field
= 0x62;
980 itv
->vbi
.sliced_decoder_line_size
= 51;
981 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xAB;
982 itv
->vbi
.sliced_decoder_sav_even_field
= 0xEC;
985 if (hw
& IVTV_HW_SAA717X
) {
986 itv
->vbi
.raw_decoder_line_size
= 1443;
987 itv
->vbi
.raw_decoder_sav_odd_field
= 0x25;
988 itv
->vbi
.raw_decoder_sav_even_field
= 0x62;
989 itv
->vbi
.sliced_decoder_line_size
= 51;
990 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xAB;
991 itv
->vbi
.sliced_decoder_sav_even_field
= 0xEC;
995 static int ivtv_probe(struct pci_dev
*pdev
, const struct pci_device_id
*pci_id
)
1001 itv
= kzalloc(sizeof(struct ivtv
), GFP_KERNEL
);
1005 itv
->instance
= v4l2_device_set_name(&itv
->v4l2_dev
, "ivtv",
1008 retval
= v4l2_device_register(&pdev
->dev
, &itv
->v4l2_dev
);
1013 IVTV_INFO("Initializing card %d\n", itv
->instance
);
1015 ivtv_process_options(itv
);
1016 if (itv
->options
.cardtype
== -1) {
1020 if (ivtv_init_struct1(itv
)) {
1024 retval
= cx2341x_handler_init(&itv
->cxhdl
, 50);
1027 itv
->v4l2_dev
.ctrl_handler
= &itv
->cxhdl
.hdl
;
1028 itv
->cxhdl
.ops
= &ivtv_cxhdl_ops
;
1029 itv
->cxhdl
.priv
= itv
;
1030 itv
->cxhdl
.func
= ivtv_api_func
;
1032 IVTV_DEBUG_INFO("base addr: 0x%llx\n", (u64
)itv
->base_addr
);
1034 /* PCI Device Setup */
1035 retval
= ivtv_setup_pci(itv
, pdev
, pci_id
);
1038 if (retval
== -ENXIO
)
1042 IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
1043 (u64
)itv
->base_addr
+ IVTV_ENCODER_OFFSET
, IVTV_ENCODER_SIZE
);
1044 itv
->enc_mem
= ioremap(itv
->base_addr
+ IVTV_ENCODER_OFFSET
,
1046 if (!itv
->enc_mem
) {
1047 IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 encoder memory\n");
1048 IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of vmalloc address space for this window\n");
1049 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1050 IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
1055 if (itv
->has_cx23415
) {
1056 IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
1057 (u64
)itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1058 itv
->dec_mem
= ioremap(itv
->base_addr
+ IVTV_DECODER_OFFSET
,
1060 if (!itv
->dec_mem
) {
1061 IVTV_ERR("ioremap failed. Can't get a window into CX23415 decoder memory\n");
1062 IVTV_ERR("Each capture card with a CX23415 needs 8 MB of vmalloc address space for this window\n");
1063 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1064 IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
1070 itv
->dec_mem
= itv
->enc_mem
;
1073 /* map registers memory */
1074 IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
1075 (u64
)itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1077 ioremap(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1078 if (!itv
->reg_mem
) {
1079 IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 register space\n");
1080 IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of vmalloc address space for this window\n");
1081 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1082 IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
1087 retval
= ivtv_gpio_init(itv
);
1092 IVTV_DEBUG_INFO("activating i2c...\n");
1093 if (init_ivtv_i2c(itv
)) {
1094 IVTV_ERR("Could not initialize i2c\n");
1098 if (itv
->card
->hw_all
& IVTV_HW_TVEEPROM
) {
1099 /* Based on the model number the cardtype may be changed.
1100 The PCI IDs are not always reliable. */
1101 ivtv_process_eeprom(itv
);
1103 if (itv
->card
->comment
)
1104 IVTV_INFO("%s", itv
->card
->comment
);
1105 if (itv
->card
->v4l2_capabilities
== 0) {
1106 /* card was detected but is not supported */
1111 if (itv
->std
== 0) {
1112 itv
->std
= V4L2_STD_NTSC_M
;
1115 if (itv
->options
.tuner
== -1) {
1118 for (i
= 0; i
< IVTV_CARD_MAX_TUNERS
; i
++) {
1119 if ((itv
->std
& itv
->card
->tuners
[i
].std
) == 0)
1121 itv
->options
.tuner
= itv
->card
->tuners
[i
].tuner
;
1125 /* if no tuner was found, then pick the first tuner in the card list */
1126 if (itv
->options
.tuner
== -1 && itv
->card
->tuners
[0].std
) {
1127 itv
->std
= itv
->card
->tuners
[0].std
;
1128 if (itv
->std
& V4L2_STD_PAL
)
1129 itv
->std
= V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
1130 else if (itv
->std
& V4L2_STD_NTSC
)
1131 itv
->std
= V4L2_STD_NTSC_M
;
1132 else if (itv
->std
& V4L2_STD_SECAM
)
1133 itv
->std
= V4L2_STD_SECAM_L
;
1134 itv
->options
.tuner
= itv
->card
->tuners
[0].tuner
;
1136 if (itv
->options
.radio
== -1)
1137 itv
->options
.radio
= (itv
->card
->radio_input
.audio_type
!= 0);
1139 /* The card is now fully identified, continue with card-specific
1141 ivtv_init_struct2(itv
);
1143 ivtv_load_and_init_modules(itv
);
1145 if (itv
->std
& V4L2_STD_525_60
) {
1147 itv
->is_out_60hz
= 1;
1150 itv
->is_out_50hz
= 1;
1153 itv
->yuv_info
.osd_full_w
= 720;
1154 itv
->yuv_info
.osd_full_h
= itv
->is_out_50hz
? 576 : 480;
1155 itv
->yuv_info
.v4l2_src_w
= itv
->yuv_info
.osd_full_w
;
1156 itv
->yuv_info
.v4l2_src_h
= itv
->yuv_info
.osd_full_h
;
1158 cx2341x_handler_set_50hz(&itv
->cxhdl
, itv
->is_50hz
);
1160 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_MPG
] = 0x08000;
1161 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_PCM
] = 0x01200;
1162 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_MPG
] = 0x10000;
1163 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_YUV
] = 0x10000;
1164 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_YUV
] = 0x08000;
1166 /* Setup VBI Raw Size. Should be big enough to hold PAL.
1167 It is possible to switch between PAL and NTSC, so we need to
1168 take the largest size here. */
1169 /* 1456 is multiple of 16, real size = 1444 */
1170 itv
->vbi
.raw_size
= 1456;
1171 /* We use a buffer size of 1/2 of the total size needed for a
1172 frame. This is actually very useful, since we now receive
1173 a field at a time and that makes 'compressing' the raw data
1174 down to size by stripping off the SAV codes a lot easier.
1175 Note: having two different buffer sizes prevents standard
1176 switching on the fly. We need to find a better solution... */
1177 vbi_buf_size
= itv
->vbi
.raw_size
* (itv
->is_60hz
? 24 : 36) / 2;
1178 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_VBI
] = vbi_buf_size
;
1179 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_VBI
] = sizeof(struct v4l2_sliced_vbi_data
) * 36;
1181 if (itv
->options
.radio
> 0)
1182 itv
->v4l2_cap
|= V4L2_CAP_RADIO
;
1184 if (itv
->options
.tuner
> -1) {
1185 struct tuner_setup setup
;
1187 setup
.addr
= ADDR_UNSET
;
1188 setup
.type
= itv
->options
.tuner
;
1189 setup
.mode_mask
= T_ANALOG_TV
; /* matches TV tuners */
1190 if (itv
->options
.radio
> 0)
1191 setup
.mode_mask
|= T_RADIO
;
1192 setup
.tuner_callback
= (setup
.type
== TUNER_XC2028
) ?
1193 ivtv_reset_tuner_gpio
: NULL
;
1194 ivtv_call_all(itv
, tuner
, s_type_addr
, &setup
);
1195 if (setup
.type
== TUNER_XC2028
) {
1196 static struct xc2028_ctrl ctrl
= {
1197 .fname
= XC2028_DEFAULT_FIRMWARE
,
1200 struct v4l2_priv_tun_config cfg
= {
1201 .tuner
= itv
->options
.tuner
,
1204 ivtv_call_all(itv
, tuner
, s_config
, &cfg
);
1208 /* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
1210 itv
->tuner_std
= itv
->std
;
1212 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
) {
1213 struct v4l2_ctrl_handler
*hdl
= itv
->v4l2_dev
.ctrl_handler
;
1215 itv
->ctrl_pts
= v4l2_ctrl_new_std(hdl
, &ivtv_hdl_out_ops
,
1216 V4L2_CID_MPEG_VIDEO_DEC_PTS
, 0, 0, 0, 0);
1217 itv
->ctrl_frame
= v4l2_ctrl_new_std(hdl
, &ivtv_hdl_out_ops
,
1218 V4L2_CID_MPEG_VIDEO_DEC_FRAME
, 0, 0, 0, 0);
1219 /* Note: V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO is not supported,
1220 mask that menu item. */
1221 itv
->ctrl_audio_playback
=
1222 v4l2_ctrl_new_std_menu(hdl
, &ivtv_hdl_out_ops
,
1223 V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK
,
1224 V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO
,
1225 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO
,
1226 V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO
);
1227 itv
->ctrl_audio_multilingual_playback
=
1228 v4l2_ctrl_new_std_menu(hdl
, &ivtv_hdl_out_ops
,
1229 V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK
,
1230 V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO
,
1231 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO
,
1232 V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT
);
1234 retval
= hdl
->error
;
1237 v4l2_ctrl_cluster(2, &itv
->ctrl_pts
);
1238 v4l2_ctrl_cluster(2, &itv
->ctrl_audio_playback
);
1239 ivtv_call_all(itv
, video
, s_std_output
, itv
->std
);
1240 /* Turn off the output signal. The mpeg decoder is not yet
1241 active so without this you would get a green image until the
1242 mpeg decoder becomes active. */
1243 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 0);
1246 /* clear interrupt mask, effectively disabling interrupts */
1247 ivtv_set_irq_mask(itv
, 0xffffffff);
1250 retval
= request_irq(itv
->pdev
->irq
, ivtv_irq_handler
,
1251 IRQF_SHARED
, itv
->v4l2_dev
.name
, (void *)itv
);
1253 IVTV_ERR("Failed to register irq %d\n", retval
);
1257 retval
= ivtv_streams_setup(itv
);
1259 IVTV_ERR("Error %d setting up streams\n", retval
);
1262 retval
= ivtv_streams_register(itv
);
1264 IVTV_ERR("Error %d registering devices\n", retval
);
1267 IVTV_INFO("Initialized card: %s\n", itv
->card_name
);
1269 /* Load ivtv submodules (ivtv-alsa) */
1270 request_modules(itv
);
1274 ivtv_streams_cleanup(itv
);
1276 free_irq(itv
->pdev
->irq
, (void *)itv
);
1278 v4l2_ctrl_handler_free(&itv
->cxhdl
.hdl
);
1283 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
1284 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1285 if (itv
->has_cx23415
)
1286 release_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1288 kthread_stop(itv
->irq_worker_task
);
1292 IVTV_ERR("Error %d on initialization\n", retval
);
1294 v4l2_device_unregister(&itv
->v4l2_dev
);
1299 int ivtv_init_on_first_open(struct ivtv
*itv
)
1301 struct v4l2_frequency vf
;
1302 /* Needed to call ioctls later */
1303 struct ivtv_open_id fh
;
1304 int fw_retry_count
= 3;
1308 fh
.type
= IVTV_ENC_STREAM_TYPE_MPG
;
1310 if (test_bit(IVTV_F_I_FAILED
, &itv
->i_flags
))
1313 if (test_and_set_bit(IVTV_F_I_INITED
, &itv
->i_flags
))
1316 while (--fw_retry_count
> 0) {
1318 if (ivtv_firmware_init(itv
) == 0)
1320 if (fw_retry_count
> 1)
1321 IVTV_WARN("Retry loading firmware\n");
1324 if (fw_retry_count
== 0) {
1325 set_bit(IVTV_F_I_FAILED
, &itv
->i_flags
);
1329 /* Try and get firmware versions */
1330 IVTV_DEBUG_INFO("Getting firmware version..\n");
1331 ivtv_firmware_versions(itv
);
1333 if (itv
->card
->hw_all
& IVTV_HW_CX25840
)
1334 v4l2_subdev_call(itv
->sd_video
, core
, load_fw
);
1337 vf
.type
= V4L2_TUNER_ANALOG_TV
;
1338 vf
.frequency
= 6400; /* the tuner 'baseline' frequency */
1340 /* Set initial frequency. For PAL/SECAM broadcasts no
1341 'default' channel exists AFAIK. */
1342 if (itv
->std
== V4L2_STD_NTSC_M_JP
) {
1343 vf
.frequency
= 1460; /* ch. 1 91250*16/1000 */
1345 else if (itv
->std
& V4L2_STD_NTSC_M
) {
1346 vf
.frequency
= 1076; /* ch. 4 67250*16/1000 */
1349 video_input
= itv
->active_input
;
1350 itv
->active_input
++; /* Force update of input */
1351 ivtv_s_input(NULL
, &fh
, video_input
);
1353 /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
1355 itv
->std
++; /* Force full standard initialization */
1356 itv
->std_out
= itv
->std
;
1357 ivtv_s_frequency(NULL
, &fh
, &vf
);
1359 if (itv
->card
->v4l2_capabilities
& V4L2_CAP_VIDEO_OUTPUT
) {
1360 /* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes
1361 the mpeg decoder so now the saa7127 receives a proper
1363 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 1);
1364 ivtv_init_mpeg_decoder(itv
);
1367 /* On a cx23416 this seems to be able to enable DMA to the chip? */
1368 if (!itv
->has_cx23415
)
1369 write_reg_sync(0x03, IVTV_REG_DMACONTROL
);
1371 ivtv_s_std_enc(itv
, itv
->tuner_std
);
1373 /* Default interrupts enabled. For the PVR350 this includes the
1374 decoder VSYNC interrupt, which is always on. It is not only used
1375 during decoding but also by the OSD.
1376 Some old PVR250 cards had a cx23415, so testing for that is too
1377 general. Instead test if the card has video output capability. */
1378 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
) {
1379 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_INIT
| IVTV_IRQ_DEC_VSYNC
);
1380 ivtv_set_osd_alpha(itv
);
1381 ivtv_s_std_dec(itv
, itv
->tuner_std
);
1383 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_INIT
);
1386 /* Setup initial controls */
1387 cx2341x_handler_setup(&itv
->cxhdl
);
1391 static void ivtv_remove(struct pci_dev
*pdev
)
1393 struct v4l2_device
*v4l2_dev
= dev_get_drvdata(&pdev
->dev
);
1394 struct ivtv
*itv
= to_ivtv(v4l2_dev
);
1397 IVTV_DEBUG_INFO("Removing card\n");
1399 flush_request_modules(itv
);
1401 if (test_bit(IVTV_F_I_INITED
, &itv
->i_flags
)) {
1402 /* Stop all captures */
1403 IVTV_DEBUG_INFO("Stopping all streams\n");
1404 if (atomic_read(&itv
->capturing
) > 0)
1405 ivtv_stop_all_captures(itv
);
1407 /* Stop all decoding */
1408 IVTV_DEBUG_INFO("Stopping decoding\n");
1410 /* Turn off the TV-out */
1411 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
)
1412 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 0);
1413 if (atomic_read(&itv
->decoding
) > 0) {
1416 if (test_bit(IVTV_F_I_DEC_YUV
, &itv
->i_flags
))
1417 type
= IVTV_DEC_STREAM_TYPE_YUV
;
1419 type
= IVTV_DEC_STREAM_TYPE_MPG
;
1420 ivtv_stop_v4l2_decode_stream(&itv
->streams
[type
],
1421 V4L2_DEC_CMD_STOP_TO_BLACK
| V4L2_DEC_CMD_STOP_IMMEDIATELY
, 0);
1423 ivtv_halt_firmware(itv
);
1427 ivtv_set_irq_mask(itv
, 0xffffffff);
1428 del_timer_sync(&itv
->dma_timer
);
1430 /* Kill irq worker */
1431 kthread_flush_worker(&itv
->irq_worker
);
1432 kthread_stop(itv
->irq_worker_task
);
1434 ivtv_streams_cleanup(itv
);
1435 ivtv_udma_free(itv
);
1437 v4l2_ctrl_handler_free(&itv
->cxhdl
.hdl
);
1441 free_irq(itv
->pdev
->irq
, (void *)itv
);
1444 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
1445 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1446 if (itv
->has_cx23415
)
1447 release_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1449 pci_disable_device(itv
->pdev
);
1450 for (i
= 0; i
< IVTV_VBI_FRAMES
; i
++)
1451 kfree(itv
->vbi
.sliced_mpeg_data
[i
]);
1453 pr_info("Removed %s\n", itv
->card_name
);
1455 v4l2_device_unregister(&itv
->v4l2_dev
);
1459 /* define a pci_driver for card detection */
1460 static struct pci_driver ivtv_pci_driver
= {
1462 .id_table
= ivtv_pci_tbl
,
1463 .probe
= ivtv_probe
,
1464 .remove
= ivtv_remove
,
1467 static int __init
module_start(void)
1469 pr_info("Start initialization, version %s\n", IVTV_VERSION
);
1471 /* Validate parameters */
1472 if (ivtv_first_minor
< 0 || ivtv_first_minor
>= IVTV_MAX_CARDS
) {
1473 pr_err("Exiting, ivtv_first_minor must be between 0 and %d\n",
1474 IVTV_MAX_CARDS
- 1);
1478 if (ivtv_debug
< 0 || ivtv_debug
> 2047) {
1480 pr_info("Debug value must be >= 0 and <= 2047\n");
1483 if (pci_register_driver(&ivtv_pci_driver
)) {
1484 pr_err("Error detecting PCI card\n");
1487 pr_info("End initialization\n");
1491 static void __exit
module_cleanup(void)
1493 pci_unregister_driver(&ivtv_pci_driver
);
1496 /* Note: These symbols are exported because they are used by the ivtvfb
1497 framebuffer module and an infrared module for the IR-blaster. */
1498 EXPORT_SYMBOL(ivtv_set_irq_mask
);
1499 EXPORT_SYMBOL(ivtv_api
);
1500 EXPORT_SYMBOL(ivtv_vapi
);
1501 EXPORT_SYMBOL(ivtv_vapi_result
);
1502 EXPORT_SYMBOL(ivtv_clear_irq_mask
);
1503 EXPORT_SYMBOL(ivtv_debug
);
1504 #ifdef CONFIG_VIDEO_ADV_DEBUG
1505 EXPORT_SYMBOL(ivtv_fw_debug
);
1507 EXPORT_SYMBOL(ivtv_reset_ir_gpio
);
1508 EXPORT_SYMBOL(ivtv_udma_setup
);
1509 EXPORT_SYMBOL(ivtv_udma_unmap
);
1510 EXPORT_SYMBOL(ivtv_udma_alloc
);
1511 EXPORT_SYMBOL(ivtv_udma_prepare
);
1512 EXPORT_SYMBOL(ivtv_init_on_first_open
);
1513 EXPORT_SYMBOL(ivtv_firmware_check
);
1515 module_init(module_start
);
1516 module_exit(module_cleanup
);