drivers/media/platform/marvell-ccic/mcam-core.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * Marvell camera core structures.
   4  *
   5  * Copyright 2011 Jonathan Corbet corbet@lwn.net
   6  */
   7 #ifndef _MCAM_CORE_H
   8 #define _MCAM_CORE_H
   9
  10 #include <linux/list.h>
  11 #include <linux/clk-provider.h>
  12 #include <media/v4l2-common.h>
  13 #include <media/v4l2-ctrls.h>
  14 #include <media/v4l2-dev.h>
  15 #include <media/videobuf2-v4l2.h>
  16
  17 /*
  18  * Create our own symbols for the supported buffer modes, but, for now,
  19  * base them entirely on which videobuf2 options have been selected.
  20  */
  21 #if IS_ENABLED(CONFIG_VIDEOBUF2_VMALLOC)
  22 #define MCAM_MODE_VMALLOC 1
  23 #endif
  24
  25 #if IS_ENABLED(CONFIG_VIDEOBUF2_DMA_CONTIG)
  26 #define MCAM_MODE_DMA_CONTIG 1
  27 #endif
  28
  29 #if IS_ENABLED(CONFIG_VIDEOBUF2_DMA_SG)
  30 #define MCAM_MODE_DMA_SG 1
  31 #endif
  32
  33 #if !defined(MCAM_MODE_VMALLOC) && !defined(MCAM_MODE_DMA_CONTIG) && \
  34         !defined(MCAM_MODE_DMA_SG)
  35 #error One of the videobuf buffer modes must be selected in the config
  36 #endif
  37
  38
  39 enum mcam_state {
  40         S_NOTREADY,     /* Not yet initialized */
  41         S_IDLE,         /* Just hanging around */
  42         S_FLAKED,       /* Some sort of problem */
  43         S_STREAMING,    /* Streaming data */
  44         S_BUFWAIT       /* streaming requested but no buffers yet */
  45 };
  46 #define MAX_DMA_BUFS 3
  47
  48 /*
  49  * Different platforms work best with different buffer modes, so we
  50  * let the platform pick.
  51  */
  52 enum mcam_buffer_mode {
  53         B_vmalloc = 0,
  54         B_DMA_contig = 1,
  55         B_DMA_sg = 2
  56 };
  57
  58 enum mcam_chip_id {
  59         MCAM_CAFE,
  60         MCAM_ARMADA610,
  61 };
  62
  63 /*
  64  * Is a given buffer mode supported by the current kernel configuration?
  65  */
  66 static inline int mcam_buffer_mode_supported(enum mcam_buffer_mode mode)
  67 {
  68         switch (mode) {
  69 #ifdef MCAM_MODE_VMALLOC
  70         case B_vmalloc:
  71 #endif
  72 #ifdef MCAM_MODE_DMA_CONTIG
  73         case B_DMA_contig:
  74 #endif
  75 #ifdef MCAM_MODE_DMA_SG
  76         case B_DMA_sg:
  77 #endif
  78                 return 1;
  79         default:
  80                 return 0;
  81         }
  82 }
  83
  84 /*
  85  * Basic frame states
  86  */
  87 struct mcam_frame_state {
  88         unsigned int frames;
  89         unsigned int singles;
  90         unsigned int delivered;
  91 };
  92
  93 #define NR_MCAM_CLK 3
  94
  95 /*
  96  * A description of one of our devices.
  97  * Locking: controlled by s_mutex.  Certain fields, however, require
  98  *          the dev_lock spinlock; they are marked as such by comments.
  99  *          dev_lock is also required for access to device registers.
 100  */
 101 struct mcam_camera {
 102         /*
 103          * These fields should be set by the platform code prior to
 104          * calling mcam_register().
 105          */
 106         unsigned char __iomem *regs;
 107         unsigned regs_size; /* size in bytes of the register space */
 108         spinlock_t dev_lock;
 109         struct device *dev; /* For messages, dma alloc */
 110         enum mcam_chip_id chip_id;
 111         enum mcam_buffer_mode buffer_mode;
 112
 113         int mclk_src;   /* which clock source the mclk derives from */
 114         int mclk_div;   /* Clock Divider Value for MCLK */
 115
 116         enum v4l2_mbus_type bus_type;
 117         /* MIPI support */
 118         /* The dphy config value, allocated in board file
 119          * dphy[0]: DPHY3
 120          * dphy[1]: DPHY5
 121          * dphy[2]: DPHY6
 122          */
 123         int *dphy;
 124         bool mipi_enabled;      /* flag whether mipi is enabled already */
 125         int lane;                       /* lane number */
 126
 127         /* clock tree support */
 128         struct clk *clk[NR_MCAM_CLK];
 129         struct clk_hw mclk_hw;
 130         struct clk *mclk;
 131
 132         /*
 133          * Callbacks from the core to the platform code.
 134          */
 135         int (*plat_power_up) (struct mcam_camera *cam);
 136         void (*plat_power_down) (struct mcam_camera *cam);
 137         void (*calc_dphy) (struct mcam_camera *cam);
 138
 139         /*
 140          * Everything below here is private to the mcam core and
 141          * should not be touched by the platform code.
 142          */
 143         struct v4l2_device v4l2_dev;
 144         struct v4l2_ctrl_handler ctrl_handler;
 145         enum mcam_state state;
 146         unsigned long flags;            /* Buffer status, mainly (dev_lock) */
 147
 148         struct mcam_frame_state frame_state;    /* Frame state counter */
 149         /*
 150          * Subsystem structures.
 151          */
 152         struct video_device vdev;
 153         struct v4l2_async_notifier notifier;
 154         struct v4l2_async_subdev asd;
 155         struct v4l2_subdev *sensor;
 156
 157         /* Videobuf2 stuff */
 158         struct vb2_queue vb_queue;
 159         struct list_head buffers;       /* Available frames */
 160
 161         unsigned int nbufs;             /* How many are alloc'd */
 162         int next_buf;                   /* Next to consume (dev_lock) */
 163
 164         char bus_info[32];              /* querycap bus_info */
 165
 166         /* DMA buffers - vmalloc mode */
 167 #ifdef MCAM_MODE_VMALLOC
 168         unsigned int dma_buf_size;      /* allocated size */
 169         void *dma_bufs[MAX_DMA_BUFS];   /* Internal buffer addresses */
 170         dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */
 171         struct tasklet_struct s_tasklet;
 172 #endif
 173         unsigned int sequence;          /* Frame sequence number */
 174         unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual bufs */
 175
 176         /* DMA buffers - DMA modes */
 177         struct mcam_vb_buffer *vb_bufs[MAX_DMA_BUFS];
 178
 179         /* Mode-specific ops, set at open time */
 180         void (*dma_setup)(struct mcam_camera *cam);
 181         void (*frame_complete)(struct mcam_camera *cam, int frame);
 182
 183         /* Current operating parameters */
 184         struct v4l2_pix_format pix_format;
 185         u32 mbus_code;
 186
 187         /* Locks */
 188         struct mutex s_mutex; /* Access to this structure */
 189 };
 190
 191
 192 /*
 193  * Register I/O functions.  These are here because the platform code
 194  * may legitimately need to mess with the register space.
 195  */
 196 /*
 197  * Device register I/O
 198  */
 199 static inline void mcam_reg_write(struct mcam_camera *cam, unsigned int reg,
 200                 unsigned int val)
 201 {
 202         iowrite32(val, cam->regs + reg);
 203 }
 204
 205 static inline unsigned int mcam_reg_read(struct mcam_camera *cam,
 206                 unsigned int reg)
 207 {
 208         return ioread32(cam->regs + reg);
 209 }
 210
 211
 212 static inline void mcam_reg_write_mask(struct mcam_camera *cam, unsigned int reg,
 213                 unsigned int val, unsigned int mask)
 214 {
 215         unsigned int v = mcam_reg_read(cam, reg);
 216
 217         v = (v & ~mask) | (val & mask);
 218         mcam_reg_write(cam, reg, v);
 219 }
 220
 221 static inline void mcam_reg_clear_bit(struct mcam_camera *cam,
 222                 unsigned int reg, unsigned int val)
 223 {
 224         mcam_reg_write_mask(cam, reg, 0, val);
 225 }
 226
 227 static inline void mcam_reg_set_bit(struct mcam_camera *cam,
 228                 unsigned int reg, unsigned int val)
 229 {
 230         mcam_reg_write_mask(cam, reg, val, val);
 231 }
 232
 233 /*
 234  * Functions for use by platform code.
 235  */
 236 int mccic_register(struct mcam_camera *cam);
 237 int mccic_irq(struct mcam_camera *cam, unsigned int irqs);
 238 void mccic_shutdown(struct mcam_camera *cam);
 239 #ifdef CONFIG_PM
 240 void mccic_suspend(struct mcam_camera *cam);
 241 int mccic_resume(struct mcam_camera *cam);
 242 #endif
 243
 244 /*
 245  * Register definitions for the m88alp01 camera interface.  Offsets in bytes
 246  * as given in the spec.
 247  */
 248 #define REG_Y0BAR       0x00
 249 #define REG_Y1BAR       0x04
 250 #define REG_Y2BAR       0x08
 251 #define REG_U0BAR       0x0c
 252 #define REG_U1BAR       0x10
 253 #define REG_U2BAR       0x14
 254 #define REG_V0BAR       0x18
 255 #define REG_V1BAR       0x1C
 256 #define REG_V2BAR       0x20
 257
 258 /*
 259  * register definitions for MIPI support
 260  */
 261 #define REG_CSI2_CTRL0  0x100
 262 #define   CSI2_C0_MIPI_EN (0x1 << 0)
 263 #define   CSI2_C0_ACT_LANE(n) ((n-1) << 1)
 264 #define REG_CSI2_DPHY3  0x12c
 265 #define REG_CSI2_DPHY5  0x134
 266 #define REG_CSI2_DPHY6  0x138
 267
 268 /* ... */
 269
 270 #define REG_IMGPITCH    0x24    /* Image pitch register */
 271 #define   IMGP_YP_SHFT    2             /* Y pitch params */
 272 #define   IMGP_YP_MASK    0x00003ffc    /* Y pitch field */
 273 #define   IMGP_UVP_SHFT   18            /* UV pitch (planar) */
 274 #define   IMGP_UVP_MASK   0x3ffc0000
 275 #define REG_IRQSTATRAW  0x28    /* RAW IRQ Status */
 276 #define   IRQ_EOF0        0x00000001    /* End of frame 0 */
 277 #define   IRQ_EOF1        0x00000002    /* End of frame 1 */
 278 #define   IRQ_EOF2        0x00000004    /* End of frame 2 */
 279 #define   IRQ_SOF0        0x00000008    /* Start of frame 0 */
 280 #define   IRQ_SOF1        0x00000010    /* Start of frame 1 */
 281 #define   IRQ_SOF2        0x00000020    /* Start of frame 2 */
 282 #define   IRQ_OVERFLOW    0x00000040    /* FIFO overflow */
 283 #define   IRQ_TWSIW       0x00010000    /* TWSI (smbus) write */
 284 #define   IRQ_TWSIR       0x00020000    /* TWSI read */
 285 #define   IRQ_TWSIE       0x00040000    /* TWSI error */
 286 #define   TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE)
 287 #define   FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2)
 288 #define   ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW)
 289 #define REG_IRQMASK     0x2c    /* IRQ mask - same bits as IRQSTAT */
 290 #define REG_IRQSTAT     0x30    /* IRQ status / clear */
 291
 292 #define REG_IMGSIZE     0x34    /* Image size */
 293 #define  IMGSZ_V_MASK     0x1fff0000
 294 #define  IMGSZ_V_SHIFT    16
 295 #define  IMGSZ_H_MASK     0x00003fff
 296 #define REG_IMGOFFSET   0x38    /* IMage offset */
 297
 298 #define REG_CTRL0       0x3c    /* Control 0 */
 299 #define   C0_ENABLE       0x00000001    /* Makes the whole thing go */
 300
 301 /* Mask for all the format bits */
 302 #define   C0_DF_MASK      0x00fffffc    /* Bits 2-23 */
 303
 304 /* RGB ordering */
 305 #define   C0_RGB4_RGBX    0x00000000
 306 #define   C0_RGB4_XRGB    0x00000004
 307 #define   C0_RGB4_BGRX    0x00000008
 308 #define   C0_RGB4_XBGR    0x0000000c
 309 #define   C0_RGB5_RGGB    0x00000000
 310 #define   C0_RGB5_GRBG    0x00000004
 311 #define   C0_RGB5_GBRG    0x00000008
 312 #define   C0_RGB5_BGGR    0x0000000c
 313
 314 /* Spec has two fields for DIN and DOUT, but they must match, so
 315    combine them here. */
 316 #define   C0_DF_YUV       0x00000000    /* Data is YUV      */
 317 #define   C0_DF_RGB       0x000000a0    /* ... RGB                  */
 318 #define   C0_DF_BAYER     0x00000140    /* ... Bayer                */
 319 /* 8-8-8 must be missing from the below - ask */
 320 #define   C0_RGBF_565     0x00000000
 321 #define   C0_RGBF_444     0x00000800
 322 #define   C0_RGB_BGR      0x00001000    /* Blue comes first */
 323 #define   C0_YUV_PLANAR   0x00000000    /* YUV 422 planar format */
 324 #define   C0_YUV_PACKED   0x00008000    /* YUV 422 packed       */
 325 #define   C0_YUV_420PL    0x0000a000    /* YUV 420 planar       */
 326 /* Think that 420 packed must be 111 - ask */
 327 #define   C0_YUVE_YUYV    0x00000000    /* Y1CbY0Cr             */
 328 #define   C0_YUVE_YVYU    0x00010000    /* Y1CrY0Cb             */
 329 #define   C0_YUVE_VYUY    0x00020000    /* CrY1CbY0             */
 330 #define   C0_YUVE_UYVY    0x00030000    /* CbY1CrY0             */
 331 #define   C0_YUVE_NOSWAP  0x00000000    /* no bytes swapping    */
 332 #define   C0_YUVE_SWAP13  0x00010000    /* swap byte 1 and 3    */
 333 #define   C0_YUVE_SWAP24  0x00020000    /* swap byte 2 and 4    */
 334 #define   C0_YUVE_SWAP1324 0x00030000   /* swap bytes 1&3 and 2&4 */
 335 /* Bayer bits 18,19 if needed */
 336 #define   C0_EOF_VSYNC    0x00400000    /* Generate EOF by VSYNC */
 337 #define   C0_VEDGE_CTRL   0x00800000    /* Detect falling edge of VSYNC */
 338 #define   C0_HPOL_LOW     0x01000000    /* HSYNC polarity active low */
 339 #define   C0_VPOL_LOW     0x02000000    /* VSYNC polarity active low */
 340 #define   C0_VCLK_LOW     0x04000000    /* VCLK on falling edge */
 341 #define   C0_DOWNSCALE    0x08000000    /* Enable downscaler */
 342 /* SIFMODE */
 343 #define   C0_SIF_HVSYNC   0x00000000    /* Use H/VSYNC */
 344 #define   C0_SOF_NOSYNC   0x40000000    /* Use inband active signaling */
 345 #define   C0_SIFM_MASK    0xc0000000    /* SIF mode bits */
 346
 347 /* Bits below C1_444ALPHA are not present in Cafe */
 348 #define REG_CTRL1       0x40    /* Control 1 */
 349 #define   C1_CLKGATE      0x00000001    /* Sensor clock gate */
 350 #define   C1_DESC_ENA     0x00000100    /* DMA descriptor enable */
 351 #define   C1_DESC_3WORD   0x00000200    /* Three-word descriptors used */
 352 #define   C1_444ALPHA     0x00f00000    /* Alpha field in RGB444 */
 353 #define   C1_ALPHA_SHFT   20
 354 #define   C1_DMAB32       0x00000000    /* 32-byte DMA burst */
 355 #define   C1_DMAB16       0x02000000    /* 16-byte DMA burst */
 356 #define   C1_DMAB64       0x04000000    /* 64-byte DMA burst */
 357 #define   C1_DMAB_MASK    0x06000000
 358 #define   C1_TWOBUFS      0x08000000    /* Use only two DMA buffers */
 359 #define   C1_PWRDWN       0x10000000    /* Power down */
 360
 361 #define REG_CLKCTRL     0x88    /* Clock control */
 362 #define   CLK_DIV_MASK    0x0000ffff    /* Upper bits RW "reserved" */
 363
 364 /* This appears to be a Cafe-only register */
 365 #define REG_UBAR        0xc4    /* Upper base address register */
 366
 367 /* Armada 610 DMA descriptor registers */
 368 #define REG_DMA_DESC_Y  0x200
 369 #define REG_DMA_DESC_U  0x204
 370 #define REG_DMA_DESC_V  0x208
 371 #define REG_DESC_LEN_Y  0x20c   /* Lengths are in bytes */
 372 #define REG_DESC_LEN_U  0x210
 373 #define REG_DESC_LEN_V  0x214
 374
 375 /*
 376  * Useful stuff that probably belongs somewhere global.
 377  */
 378 #define VGA_WIDTH       640
 379 #define VGA_HEIGHT      480
 380
 381 #endif /* _MCAM_CORE_H */