treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / media / rc / fintek-cir.c
blobb74bb13161fd4bafd939e6294bbdd68cb8ee7025
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
5 * Copyright (C) 2011 Jarod Wilson <jarod@redhat.com>
7 * Special thanks to Fintek for providing hardware and spec sheets.
8 * This driver is based upon the nuvoton, ite and ene drivers for
9 * similar hardware.
12 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/pnp.h>
17 #include <linux/io.h>
18 #include <linux/interrupt.h>
19 #include <linux/sched.h>
20 #include <linux/slab.h>
21 #include <media/rc-core.h>
23 #include "fintek-cir.h"
25 /* write val to config reg */
26 static inline void fintek_cr_write(struct fintek_dev *fintek, u8 val, u8 reg)
28 fit_dbg("%s: reg 0x%02x, val 0x%02x (ip/dp: %02x/%02x)",
29 __func__, reg, val, fintek->cr_ip, fintek->cr_dp);
30 outb(reg, fintek->cr_ip);
31 outb(val, fintek->cr_dp);
34 /* read val from config reg */
35 static inline u8 fintek_cr_read(struct fintek_dev *fintek, u8 reg)
37 u8 val;
39 outb(reg, fintek->cr_ip);
40 val = inb(fintek->cr_dp);
42 fit_dbg("%s: reg 0x%02x, val 0x%02x (ip/dp: %02x/%02x)",
43 __func__, reg, val, fintek->cr_ip, fintek->cr_dp);
44 return val;
47 /* update config register bit without changing other bits */
48 static inline void fintek_set_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg)
50 u8 tmp = fintek_cr_read(fintek, reg) | val;
51 fintek_cr_write(fintek, tmp, reg);
54 /* clear config register bit without changing other bits */
55 static inline void fintek_clear_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg)
57 u8 tmp = fintek_cr_read(fintek, reg) & ~val;
58 fintek_cr_write(fintek, tmp, reg);
61 /* enter config mode */
62 static inline void fintek_config_mode_enable(struct fintek_dev *fintek)
64 /* Enabling Config Mode explicitly requires writing 2x */
65 outb(CONFIG_REG_ENABLE, fintek->cr_ip);
66 outb(CONFIG_REG_ENABLE, fintek->cr_ip);
69 /* exit config mode */
70 static inline void fintek_config_mode_disable(struct fintek_dev *fintek)
72 outb(CONFIG_REG_DISABLE, fintek->cr_ip);
76 * When you want to address a specific logical device, write its logical
77 * device number to GCR_LOGICAL_DEV_NO
79 static inline void fintek_select_logical_dev(struct fintek_dev *fintek, u8 ldev)
81 fintek_cr_write(fintek, ldev, GCR_LOGICAL_DEV_NO);
84 /* write val to cir config register */
85 static inline void fintek_cir_reg_write(struct fintek_dev *fintek, u8 val, u8 offset)
87 outb(val, fintek->cir_addr + offset);
90 /* read val from cir config register */
91 static u8 fintek_cir_reg_read(struct fintek_dev *fintek, u8 offset)
93 return inb(fintek->cir_addr + offset);
96 /* dump current cir register contents */
97 static void cir_dump_regs(struct fintek_dev *fintek)
99 fintek_config_mode_enable(fintek);
100 fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
102 pr_info("%s: Dump CIR logical device registers:\n", FINTEK_DRIVER_NAME);
103 pr_info(" * CR CIR BASE ADDR: 0x%x\n",
104 (fintek_cr_read(fintek, CIR_CR_BASE_ADDR_HI) << 8) |
105 fintek_cr_read(fintek, CIR_CR_BASE_ADDR_LO));
106 pr_info(" * CR CIR IRQ NUM: 0x%x\n",
107 fintek_cr_read(fintek, CIR_CR_IRQ_SEL));
109 fintek_config_mode_disable(fintek);
111 pr_info("%s: Dump CIR registers:\n", FINTEK_DRIVER_NAME);
112 pr_info(" * STATUS: 0x%x\n",
113 fintek_cir_reg_read(fintek, CIR_STATUS));
114 pr_info(" * CONTROL: 0x%x\n",
115 fintek_cir_reg_read(fintek, CIR_CONTROL));
116 pr_info(" * RX_DATA: 0x%x\n",
117 fintek_cir_reg_read(fintek, CIR_RX_DATA));
118 pr_info(" * TX_CONTROL: 0x%x\n",
119 fintek_cir_reg_read(fintek, CIR_TX_CONTROL));
120 pr_info(" * TX_DATA: 0x%x\n",
121 fintek_cir_reg_read(fintek, CIR_TX_DATA));
124 /* detect hardware features */
125 static int fintek_hw_detect(struct fintek_dev *fintek)
127 unsigned long flags;
128 u8 chip_major, chip_minor;
129 u8 vendor_major, vendor_minor;
130 u8 portsel, ir_class;
131 u16 vendor, chip;
133 fintek_config_mode_enable(fintek);
135 /* Check if we're using config port 0x4e or 0x2e */
136 portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL);
137 if (portsel == 0xff) {
138 fit_pr(KERN_INFO, "first portsel read was bunk, trying alt");
139 fintek_config_mode_disable(fintek);
140 fintek->cr_ip = CR_INDEX_PORT2;
141 fintek->cr_dp = CR_DATA_PORT2;
142 fintek_config_mode_enable(fintek);
143 portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL);
145 fit_dbg("portsel reg: 0x%02x", portsel);
147 ir_class = fintek_cir_reg_read(fintek, CIR_CR_CLASS);
148 fit_dbg("ir_class reg: 0x%02x", ir_class);
150 switch (ir_class) {
151 case CLASS_RX_2TX:
152 case CLASS_RX_1TX:
153 fintek->hw_tx_capable = true;
154 break;
155 case CLASS_RX_ONLY:
156 default:
157 fintek->hw_tx_capable = false;
158 break;
161 chip_major = fintek_cr_read(fintek, GCR_CHIP_ID_HI);
162 chip_minor = fintek_cr_read(fintek, GCR_CHIP_ID_LO);
163 chip = chip_major << 8 | chip_minor;
165 vendor_major = fintek_cr_read(fintek, GCR_VENDOR_ID_HI);
166 vendor_minor = fintek_cr_read(fintek, GCR_VENDOR_ID_LO);
167 vendor = vendor_major << 8 | vendor_minor;
169 if (vendor != VENDOR_ID_FINTEK)
170 fit_pr(KERN_WARNING, "Unknown vendor ID: 0x%04x", vendor);
171 else
172 fit_dbg("Read Fintek vendor ID from chip");
174 fintek_config_mode_disable(fintek);
176 spin_lock_irqsave(&fintek->fintek_lock, flags);
177 fintek->chip_major = chip_major;
178 fintek->chip_minor = chip_minor;
179 fintek->chip_vendor = vendor;
182 * Newer reviews of this chipset uses port 8 instead of 5
184 if ((chip != 0x0408) && (chip != 0x0804))
185 fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV2;
186 else
187 fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV1;
189 spin_unlock_irqrestore(&fintek->fintek_lock, flags);
191 return 0;
194 static void fintek_cir_ldev_init(struct fintek_dev *fintek)
196 /* Select CIR logical device and enable */
197 fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
198 fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
200 /* Write allocated CIR address and IRQ information to hardware */
201 fintek_cr_write(fintek, fintek->cir_addr >> 8, CIR_CR_BASE_ADDR_HI);
202 fintek_cr_write(fintek, fintek->cir_addr & 0xff, CIR_CR_BASE_ADDR_LO);
204 fintek_cr_write(fintek, fintek->cir_irq, CIR_CR_IRQ_SEL);
206 fit_dbg("CIR initialized, base io address: 0x%lx, irq: %d (len: %d)",
207 fintek->cir_addr, fintek->cir_irq, fintek->cir_port_len);
210 /* enable CIR interrupts */
211 static void fintek_enable_cir_irq(struct fintek_dev *fintek)
213 fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS);
216 static void fintek_cir_regs_init(struct fintek_dev *fintek)
218 /* clear any and all stray interrupts */
219 fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
221 /* and finally, enable interrupts */
222 fintek_enable_cir_irq(fintek);
225 static void fintek_enable_wake(struct fintek_dev *fintek)
227 fintek_config_mode_enable(fintek);
228 fintek_select_logical_dev(fintek, LOGICAL_DEV_ACPI);
230 /* Allow CIR PME's to wake system */
231 fintek_set_reg_bit(fintek, ACPI_WAKE_EN_CIR_BIT, LDEV_ACPI_WAKE_EN_REG);
232 /* Enable CIR PME's */
233 fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_EN_REG);
234 /* Clear CIR PME status register */
235 fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_CLR_REG);
236 /* Save state */
237 fintek_set_reg_bit(fintek, ACPI_STATE_CIR_BIT, LDEV_ACPI_STATE_REG);
239 fintek_config_mode_disable(fintek);
242 static int fintek_cmdsize(u8 cmd, u8 subcmd)
244 int datasize = 0;
246 switch (cmd) {
247 case BUF_COMMAND_NULL:
248 if (subcmd == BUF_HW_CMD_HEADER)
249 datasize = 1;
250 break;
251 case BUF_HW_CMD_HEADER:
252 if (subcmd == BUF_CMD_G_REVISION)
253 datasize = 2;
254 break;
255 case BUF_COMMAND_HEADER:
256 switch (subcmd) {
257 case BUF_CMD_S_CARRIER:
258 case BUF_CMD_S_TIMEOUT:
259 case BUF_RSP_PULSE_COUNT:
260 datasize = 2;
261 break;
262 case BUF_CMD_SIG_END:
263 case BUF_CMD_S_TXMASK:
264 case BUF_CMD_S_RXSENSOR:
265 datasize = 1;
266 break;
270 return datasize;
273 /* process ir data stored in driver buffer */
274 static void fintek_process_rx_ir_data(struct fintek_dev *fintek)
276 struct ir_raw_event rawir = {};
277 u8 sample;
278 bool event = false;
279 int i;
281 for (i = 0; i < fintek->pkts; i++) {
282 sample = fintek->buf[i];
283 switch (fintek->parser_state) {
284 case CMD_HEADER:
285 fintek->cmd = sample;
286 if ((fintek->cmd == BUF_COMMAND_HEADER) ||
287 ((fintek->cmd & BUF_COMMAND_MASK) !=
288 BUF_PULSE_BIT)) {
289 fintek->parser_state = SUBCMD;
290 continue;
292 fintek->rem = (fintek->cmd & BUF_LEN_MASK);
293 fit_dbg("%s: rem: 0x%02x", __func__, fintek->rem);
294 if (fintek->rem)
295 fintek->parser_state = PARSE_IRDATA;
296 else
297 ir_raw_event_reset(fintek->rdev);
298 break;
299 case SUBCMD:
300 fintek->rem = fintek_cmdsize(fintek->cmd, sample);
301 fintek->parser_state = CMD_DATA;
302 break;
303 case CMD_DATA:
304 fintek->rem--;
305 break;
306 case PARSE_IRDATA:
307 fintek->rem--;
308 rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
309 rawir.duration = US_TO_NS((sample & BUF_SAMPLE_MASK)
310 * CIR_SAMPLE_PERIOD);
312 fit_dbg("Storing %s with duration %d",
313 rawir.pulse ? "pulse" : "space",
314 rawir.duration);
315 if (ir_raw_event_store_with_filter(fintek->rdev,
316 &rawir))
317 event = true;
318 break;
321 if ((fintek->parser_state != CMD_HEADER) && !fintek->rem)
322 fintek->parser_state = CMD_HEADER;
325 fintek->pkts = 0;
327 if (event) {
328 fit_dbg("Calling ir_raw_event_handle");
329 ir_raw_event_handle(fintek->rdev);
333 /* copy data from hardware rx register into driver buffer */
334 static void fintek_get_rx_ir_data(struct fintek_dev *fintek, u8 rx_irqs)
336 unsigned long flags;
337 u8 sample, status;
339 spin_lock_irqsave(&fintek->fintek_lock, flags);
342 * We must read data from CIR_RX_DATA until the hardware IR buffer
343 * is empty and clears the RX_TIMEOUT and/or RX_RECEIVE flags in
344 * the CIR_STATUS register
346 do {
347 sample = fintek_cir_reg_read(fintek, CIR_RX_DATA);
348 fit_dbg("%s: sample: 0x%02x", __func__, sample);
350 fintek->buf[fintek->pkts] = sample;
351 fintek->pkts++;
353 status = fintek_cir_reg_read(fintek, CIR_STATUS);
354 if (!(status & CIR_STATUS_IRQ_EN))
355 break;
356 } while (status & rx_irqs);
358 fintek_process_rx_ir_data(fintek);
360 spin_unlock_irqrestore(&fintek->fintek_lock, flags);
363 static void fintek_cir_log_irqs(u8 status)
365 fit_pr(KERN_INFO, "IRQ 0x%02x:%s%s%s%s%s", status,
366 status & CIR_STATUS_IRQ_EN ? " IRQEN" : "",
367 status & CIR_STATUS_TX_FINISH ? " TXF" : "",
368 status & CIR_STATUS_TX_UNDERRUN ? " TXU" : "",
369 status & CIR_STATUS_RX_TIMEOUT ? " RXTO" : "",
370 status & CIR_STATUS_RX_RECEIVE ? " RXOK" : "");
373 /* interrupt service routine for incoming and outgoing CIR data */
374 static irqreturn_t fintek_cir_isr(int irq, void *data)
376 struct fintek_dev *fintek = data;
377 u8 status, rx_irqs;
379 fit_dbg_verbose("%s firing", __func__);
381 fintek_config_mode_enable(fintek);
382 fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
383 fintek_config_mode_disable(fintek);
386 * Get IR Status register contents. Write 1 to ack/clear
388 * bit: reg name - description
389 * 3: TX_FINISH - TX is finished
390 * 2: TX_UNDERRUN - TX underrun
391 * 1: RX_TIMEOUT - RX data timeout
392 * 0: RX_RECEIVE - RX data received
394 status = fintek_cir_reg_read(fintek, CIR_STATUS);
395 if (!(status & CIR_STATUS_IRQ_MASK) || status == 0xff) {
396 fit_dbg_verbose("%s exiting, IRSTS 0x%02x", __func__, status);
397 fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
398 return IRQ_RETVAL(IRQ_NONE);
401 if (debug)
402 fintek_cir_log_irqs(status);
404 rx_irqs = status & (CIR_STATUS_RX_RECEIVE | CIR_STATUS_RX_TIMEOUT);
405 if (rx_irqs)
406 fintek_get_rx_ir_data(fintek, rx_irqs);
408 /* ack/clear all irq flags we've got */
409 fintek_cir_reg_write(fintek, status, CIR_STATUS);
411 fit_dbg_verbose("%s done", __func__);
412 return IRQ_RETVAL(IRQ_HANDLED);
415 static void fintek_enable_cir(struct fintek_dev *fintek)
417 /* set IRQ enabled */
418 fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS);
420 fintek_config_mode_enable(fintek);
422 /* enable the CIR logical device */
423 fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
424 fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
426 fintek_config_mode_disable(fintek);
428 /* clear all pending interrupts */
429 fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
431 /* enable interrupts */
432 fintek_enable_cir_irq(fintek);
435 static void fintek_disable_cir(struct fintek_dev *fintek)
437 fintek_config_mode_enable(fintek);
439 /* disable the CIR logical device */
440 fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
441 fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN);
443 fintek_config_mode_disable(fintek);
446 static int fintek_open(struct rc_dev *dev)
448 struct fintek_dev *fintek = dev->priv;
449 unsigned long flags;
451 spin_lock_irqsave(&fintek->fintek_lock, flags);
452 fintek_enable_cir(fintek);
453 spin_unlock_irqrestore(&fintek->fintek_lock, flags);
455 return 0;
458 static void fintek_close(struct rc_dev *dev)
460 struct fintek_dev *fintek = dev->priv;
461 unsigned long flags;
463 spin_lock_irqsave(&fintek->fintek_lock, flags);
464 fintek_disable_cir(fintek);
465 spin_unlock_irqrestore(&fintek->fintek_lock, flags);
468 /* Allocate memory, probe hardware, and initialize everything */
469 static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
471 struct fintek_dev *fintek;
472 struct rc_dev *rdev;
473 int ret = -ENOMEM;
475 fintek = kzalloc(sizeof(struct fintek_dev), GFP_KERNEL);
476 if (!fintek)
477 return ret;
479 /* input device for IR remote (and tx) */
480 rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
481 if (!rdev)
482 goto exit_free_dev_rdev;
484 ret = -ENODEV;
485 /* validate pnp resources */
486 if (!pnp_port_valid(pdev, 0)) {
487 dev_err(&pdev->dev, "IR PNP Port not valid!\n");
488 goto exit_free_dev_rdev;
491 if (!pnp_irq_valid(pdev, 0)) {
492 dev_err(&pdev->dev, "IR PNP IRQ not valid!\n");
493 goto exit_free_dev_rdev;
496 fintek->cir_addr = pnp_port_start(pdev, 0);
497 fintek->cir_irq = pnp_irq(pdev, 0);
498 fintek->cir_port_len = pnp_port_len(pdev, 0);
500 fintek->cr_ip = CR_INDEX_PORT;
501 fintek->cr_dp = CR_DATA_PORT;
503 spin_lock_init(&fintek->fintek_lock);
505 pnp_set_drvdata(pdev, fintek);
506 fintek->pdev = pdev;
508 ret = fintek_hw_detect(fintek);
509 if (ret)
510 goto exit_free_dev_rdev;
512 /* Initialize CIR & CIR Wake Logical Devices */
513 fintek_config_mode_enable(fintek);
514 fintek_cir_ldev_init(fintek);
515 fintek_config_mode_disable(fintek);
517 /* Initialize CIR & CIR Wake Config Registers */
518 fintek_cir_regs_init(fintek);
520 /* Set up the rc device */
521 rdev->priv = fintek;
522 rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
523 rdev->open = fintek_open;
524 rdev->close = fintek_close;
525 rdev->device_name = FINTEK_DESCRIPTION;
526 rdev->input_phys = "fintek/cir0";
527 rdev->input_id.bustype = BUS_HOST;
528 rdev->input_id.vendor = VENDOR_ID_FINTEK;
529 rdev->input_id.product = fintek->chip_major;
530 rdev->input_id.version = fintek->chip_minor;
531 rdev->dev.parent = &pdev->dev;
532 rdev->driver_name = FINTEK_DRIVER_NAME;
533 rdev->map_name = RC_MAP_RC6_MCE;
534 rdev->timeout = US_TO_NS(1000);
535 /* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
536 rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD);
538 fintek->rdev = rdev;
540 ret = -EBUSY;
541 /* now claim resources */
542 if (!request_region(fintek->cir_addr,
543 fintek->cir_port_len, FINTEK_DRIVER_NAME))
544 goto exit_free_dev_rdev;
546 if (request_irq(fintek->cir_irq, fintek_cir_isr, IRQF_SHARED,
547 FINTEK_DRIVER_NAME, (void *)fintek))
548 goto exit_free_cir_addr;
550 ret = rc_register_device(rdev);
551 if (ret)
552 goto exit_free_irq;
554 device_init_wakeup(&pdev->dev, true);
556 fit_pr(KERN_NOTICE, "driver has been successfully loaded\n");
557 if (debug)
558 cir_dump_regs(fintek);
560 return 0;
562 exit_free_irq:
563 free_irq(fintek->cir_irq, fintek);
564 exit_free_cir_addr:
565 release_region(fintek->cir_addr, fintek->cir_port_len);
566 exit_free_dev_rdev:
567 rc_free_device(rdev);
568 kfree(fintek);
570 return ret;
573 static void fintek_remove(struct pnp_dev *pdev)
575 struct fintek_dev *fintek = pnp_get_drvdata(pdev);
576 unsigned long flags;
578 spin_lock_irqsave(&fintek->fintek_lock, flags);
579 /* disable CIR */
580 fintek_disable_cir(fintek);
581 fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
582 /* enable CIR Wake (for IR power-on) */
583 fintek_enable_wake(fintek);
584 spin_unlock_irqrestore(&fintek->fintek_lock, flags);
586 /* free resources */
587 free_irq(fintek->cir_irq, fintek);
588 release_region(fintek->cir_addr, fintek->cir_port_len);
590 rc_unregister_device(fintek->rdev);
592 kfree(fintek);
595 static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state)
597 struct fintek_dev *fintek = pnp_get_drvdata(pdev);
598 unsigned long flags;
600 fit_dbg("%s called", __func__);
602 spin_lock_irqsave(&fintek->fintek_lock, flags);
604 /* disable all CIR interrupts */
605 fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
607 spin_unlock_irqrestore(&fintek->fintek_lock, flags);
609 fintek_config_mode_enable(fintek);
611 /* disable cir logical dev */
612 fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
613 fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN);
615 fintek_config_mode_disable(fintek);
617 /* make sure wake is enabled */
618 fintek_enable_wake(fintek);
620 return 0;
623 static int fintek_resume(struct pnp_dev *pdev)
625 struct fintek_dev *fintek = pnp_get_drvdata(pdev);
627 fit_dbg("%s called", __func__);
629 /* open interrupt */
630 fintek_enable_cir_irq(fintek);
632 /* Enable CIR logical device */
633 fintek_config_mode_enable(fintek);
634 fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
635 fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
637 fintek_config_mode_disable(fintek);
639 fintek_cir_regs_init(fintek);
641 return 0;
644 static void fintek_shutdown(struct pnp_dev *pdev)
646 struct fintek_dev *fintek = pnp_get_drvdata(pdev);
647 fintek_enable_wake(fintek);
650 static const struct pnp_device_id fintek_ids[] = {
651 { "FIT0002", 0 }, /* CIR */
652 { "", 0 },
655 static struct pnp_driver fintek_driver = {
656 .name = FINTEK_DRIVER_NAME,
657 .id_table = fintek_ids,
658 .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
659 .probe = fintek_probe,
660 .remove = fintek_remove,
661 .suspend = fintek_suspend,
662 .resume = fintek_resume,
663 .shutdown = fintek_shutdown,
666 module_param(debug, int, S_IRUGO | S_IWUSR);
667 MODULE_PARM_DESC(debug, "Enable debugging output");
669 MODULE_DEVICE_TABLE(pnp, fintek_ids);
670 MODULE_DESCRIPTION(FINTEK_DESCRIPTION " driver");
672 MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
673 MODULE_LICENSE("GPL");
675 module_pnp_driver(fintek_driver);